- 31 Jan, 2008 15 commits
-
-
Huang, Ying authored
Because in i386 early boot stage, boot_cpu_data may be not available, which makes clflush_cach_range() into infinite loop, which is called by change_page_attr(). This patch fixes this by setting boot_cpu_data.x86_clflush_size in early_cpu_detect(). Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Huang, Ying authored
This patch replaces __change_page_attr_set_clr() with change_page_attr_set_clr() in change_page_attr_clear() to flush the TLB/cache properly. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Harvey Harrison authored
arch/x86/kernel/cpu/intel_cacheinfo.c:355:7: warning: symbol 'i' shadows an earlier one arch/x86/kernel/cpu/intel_cacheinfo.c:296:39: originally declared here arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: warning: incorrect type in argument 2 (different signedness) arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: expected unsigned int *eax arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: got int * arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: warning: incorrect type in argument 3 (different signedness) arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: expected unsigned int *ebx arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: got int * arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: warning: incorrect type in argument 4 (different signedness) arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: expected unsigned int *ecx arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: got int * arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: warning: incorrect type in argument 5 (different signedness) arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: expected unsigned int *edx arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: got int * Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits) [POWERPC] Cell IOMMU fixed mapping support [POWERPC] Split out the ioid fetching/checking logic [POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows [POWERPC] Split out the IOMMU logic from cell_dma_dev_setup() [POWERPC] Split cell_iommu_setup_hardware() into two parts [POWERPC] Split out the logic that allocates struct iommus [POWERPC] Allocate the hash table under 1G on cell [POWERPC] Add set_dma_ops() to match get_dma_ops() [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format. [POWERPC] 85xx: Only invalidate TLB0 and TLB1 [POWERPC] 83xx: Fix typo in mpc837x compatible entries [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall [POWERPC] 83xx: rework platform Kconfig [POWERPC] 85xx: rework platform Kconfig [POWERPC] 86xx: Remove unused IRQ defines [POWERPC] QE: Explicitly set address-cells and size cells for muram [POWERPC] Convert StorCenter DTS file to /dts-v1/ format. [POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format. [PPC] Remove 85xx from arch/ppc [PPC] Remove 83xx from arch/ppc ...
-
Michael Ellerman authored
This patch adds support for setting up a fixed IOMMU mapping on certain cell machines. For 64-bit devices this avoids the performance overhead of mapping and unmapping pages at runtime. 32-bit devices are unable to use the fixed mapping. The fixed mapping is established at boot, and maps all of physical memory 1:1 into device space at some offset. On machines with < 30 GB of memory we setup the fixed mapping immediately above the normal IOMMU window. For example a machine with 4GB of memory would end up with the normal IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In this case a 64-bit device wishing to DMA to 1GB would be told to DMA to 3GB, plus any offset required by firmware. The firmware offset is encoded in the "dma-ranges" property. On machines with 30GB or more of memory, we are unable to place the fixed mapping above the normal IOMMU window as we would run out of address space. Instead we move the normal IOMMU window to coincide with the hash page table, this region does not need to be part of the fixed mapping as no device should ever be DMA'ing to it. We then setup the fixed mapping from 0 to 32GB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
Split out the ioid fetching and checking logic so we can use it elsewhere in a subsequent patch. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
Add support to cell_iommu_setup_page_tables() for handling two windows, the dynamic window and the fixed window. A fixed window size of 0 indicates that there is no fixed window at all. Currently there are no callers who pass a non-zero fixed window, but the upcoming fixed IOMMU mapping patch will change that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
Split the IOMMU logic out from cell_dma_dev_setup() into a separate function. If we're not using dma_direct_ops or dma_iommu_ops we don't know what the hell's going on, so BUG. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
Split cell_iommu_setup_hardware() into two parts. Split the page table setup into cell_iommu_setup_page_tables() and the bits that kick the hardware into cell_iommu_enable_hardware(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
Split out the logic that allocates a struct iommu into a separate function. This can fail however the calling code has never cared - so just return if we can't allocate an iommu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
In order to support the fixed IOMMU mapping (in a subsequent patch), we need the hash table to be inside the IOMMUs DMA window. This is usually 2G, but let's make sure the hash table is under 1G as that will satisfy the IOMMU requirements and also means the hash table will be on node 0. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: alpha: fix x86.git merge build error ia64: on UP percpu variables are not small memory model x86: fix arch/x86/kernel/test_nx.c modular build bug s390: use generic percpu linux-2.6.git POWERPC: use generic per cpu ia64: use generic percpu SPARC64: use generic percpu percpu: change Kconfig to HAVE_SETUP_PER_CPU_AREA modules: fold percpu_modcopy into module.c x86: export copy_from_user_ll_nocache[_nozero] x86: fix duplicated TIF on 64-bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (26 commits) firewire: fw-sbp2: Use sbp2 device-provided mgt orb timeout for logins firewire: fw-sbp2: increase login orb reply timeout, fix "failed to login" firewire: replace subtraction with bitwise and firewire: fw-core: react on bus resets while the config ROM is being fetched firewire: enforce access order between generation and node ID, fix "giving up on config rom" firewire: fw-cdev: use device generation, not card generation firewire: fw-sbp2: use device generation, not card generation firewire: fw-sbp2: try to increase reconnect_hold (speed up reconnection) firewire: fw-sbp2: skip unnecessary logout firewire vs. ieee1394: clarify MAINTAINERS firewire: fw-ohci: Dynamically allocate buffers for DMA descriptors firewire: fw-ohci: CycleTooLong interrupt management firewire: Fix extraction of source node id firewire: fw-ohci: Bug fixes for packet-per-buffer support firewire: fw-ohci: Fix for dualbuffer three-or-more buffers firewire: fw-sbp2: remove unused misleading macro firewire: fw-sbp2: prepare for s/g chaining firewire: fw-sbp2: refactor workq and kref handling ieee1394: ohci1394: don't schedule IT tasklets on IR events ieee1394: sbp2: raise default transfer size limit ...
-
Paul Mackerras authored
-
- 30 Jan, 2008 25 commits
-
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] use SGI_HAS_INDYDOG for INDYDOG depends
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (27 commits) lguest: use __PAGE_KERNEL instead of _PAGE_KERNEL lguest: Use explicit includes rateher than indirect lguest: get rid of lg variable assignments lguest: change gpte_addr header lguest: move changed bitmap to lg_cpu lguest: move last_pages to lg_cpu lguest: change last_guest to last_cpu lguest: change spte_addr header lguest: per-vcpu lguest pgdir management lguest: make pending notifications per-vcpu lguest: makes special fields be per-vcpu lguest: per-vcpu lguest task management lguest: replace lguest_arch with lg_cpu_arch. lguest: make registers per-vcpu lguest: make emulate_insn receive a vcpu struct. lguest: map_switcher_in_guest() per-vcpu lguest: per-vcpu interrupt processing. lguest: per-vcpu lguest timers lguest: make hypercalls use the vcpu struct lguest: make write() operation smp aware ... Manual conflict resolved (maybe even correctly, who knows) in drivers/lguest/x86/core.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: security: compile capabilities by default selinux: make selinux_set_mnt_opts() static SELinux: Add warning messages on network denial due to error SELinux: Add network ingress and egress control permission checks NetLabel: Add auditing to the static labeling mechanism NetLabel: Introduce static network labels for unlabeled connections SELinux: Allow NetLabel to directly cache SIDs SELinux: Enable dynamic enable/disable of the network access checks SELinux: Better integration between peer labeling subsystems SELinux: Add a new peer class and permissions to the Flask definitions SELinux: Add a capabilities bitmap to SELinux policy version 22 SELinux: Add a network node caching mechanism similar to the sel_netif_*() functions SELinux: Only store the network interface's ifindex SELinux: Convert the netif code to use ifindex values NetLabel: Add IP address family information to the netlbl_skbuff_getattr() function NetLabel: Add secid token support to the NetLabel secattr struct NetLabel: Consolidate the LSM domain mapping/hashing locks NetLabel: Cleanup the LSM domain hash functions NetLabel: Remove unneeded RCU read locks
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: PPC: Fix powerpc vio_find_name to not use devices_subsys Driver core: add bus_find_device_by_name function Module: check to see if we have a built in module with the same name x86: fix runtime error in arch/x86/kernel/cpu/mcheck/mce_amd_64.c Driver core: Fix up build when CONFIG_BLOCK=N
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (249 commits) KVM: Move apic timer migration away from critical section KVM: Put kvm_para.h include outside __KERNEL__ KVM: Fix unbounded preemption latency KVM: Initialize the mmu caches only after verifying cpu support KVM: MMU: Fix dirty page setting for pages removed from rmap KVM: Portability: Move kvm_fpu to asm-x86/kvm.h KVM: x86 emulator: Only allow VMCALL/VMMCALL trapped by #UD KVM: MMU: Merge shadow level check in FNAME(fetch) KVM: MMU: Move kvm_free_some_pages() into critical section KVM: MMU: Switch to mmu spinlock KVM: MMU: Avoid calling gfn_to_page() in mmu_set_spte() KVM: Add kvm_read_guest_atomic() KVM: MMU: Concurrent guest walkers KVM: Disable vapic support on Intel machines with FlexPriority KVM: Accelerated apic support KVM: local APIC TPR access reporting facility KVM: Print data for unimplemented wrmsr KVM: MMU: Add cache miss statistic KVM: MMU: Coalesce remote tlb flushes KVM: Expose ioapic to ia64 save/restore APIs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: (21 commits) dlm: static initialization improvements dlm: clean ups dlm: Sanity check namelen before copying it dlm: keep cached master rsbs during recovery dlm: change error message to debug dlm: fix possible use-after-free dlm: limit dir lookup loop dlm: reject normal unlock when lock is waiting for lookup dlm: validate messages before processing dlm: reject messages from non-members dlm: another call to confirm_master in receive_request_reply dlm: recover locks waiting for overlap replies dlm: clear ast_type when removing from astqueue dlm: use fixed errno values in messages dlm: swap bytes for rcom lock reply dlm: align midcomms message buffer dlm: close othercons dlm: use dlm prefix on alloc and free functions dlm: don't print common non-errors dlm: proper prototypes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (21 commits) [SCSI] Revert "[SCSI] aacraid: fib context lock for management ioctls" [SCSI] bsg: copy the cmd_type field to the subordinate request for bidi [SCSI] handle scsi_init_queue failure properly [SCSI] destroy scsi_bidi_sdb_cache in scsi_exit_queue [SCSI] scsi_debug: add XDWRITEREAD_10 support [SCSI] scsi_debug: add bidi data transfer support [SCSI] scsi_debug: add get_data_transfer_info helper function [SCSI] remove use_sg_chaining [SCSI] bidirectional: fix up for the new blk_end_request code [SCSI] bidirectional command support [SCSI] implement scsi_data_buffer [SCSI] tgt: use scsi_init_io instead of scsi_alloc_sgtable [SCSI] aic7xxx: fix warnings with CONFIG_PM disabled [SCSI] aic79xx: fix warnings with CONFIG_PM disabled [SCSI] aic7xxx: fix ahc_done check SCB_ACTIVE for tagged transactions [SCSI] sgiwd93: use cached memory access to make driver work on IP28 [SCSI] zfcp: fix sense_buffer access bug [SCSI] ncr53c8xx: fix sense_buffer access bug [SCSI] aic79xx: fix sense_buffer access bug [SCSI] hptiop: fix sense_buffer access bug ...
-
Randy Dunlap authored
Fix docbook fatal error: docproc: linux-2.6.24-git8/block/ll_rw_blk.c: No such file or directory Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix kernel-doc empty line warning: Warning(linux-2.6.24-git8//drivers/base/class.c:866): bad line: Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
a5a19c63 removed the include of asm/pgalloc.h from asm-generic/tlb.h. That works fine on most architectures, but broke ALPHA. Fixup ALPHA by adding the include to asm-alpha/tlbflush.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Tony says: | The CONFIG_SMP=n path in ia64 makes quite radical changes ... rather | than putting all the per-cpu stuff into the top 64K of address space | and providing a per-cpu TLB mapping for that range to a different | physical address ... it just makes all the per-cpu stuff link as ordinary | variables in .data. the new generic percpu code got confused about this as PER_CPU_ATTRIBUTES was defined even on UP, so it picked up that small memory model - which was not possible to get linked. The right fix is to only define that on SMP. This resolved the build failures in my cross-compiling environment. also link these variables into the .percpu section even on UP - some assembly code has offset dependencies. (such as GET_IA64_MCA_DATA() in arch/ia64/kernel/mca_asm.S) Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Tony Luck <tony.luck@intel.com>
-
Ingo Molnar authored
fix this modular build bug: > CC [M] arch/x86/kernel/test_nx.o > {standard input}: Assembler messages: > {standard input}:58: Error: cannot represent relocation type BFD_RELOC_64 > {standard input}:59: Error: cannot represent relocation type BFD_RELOC_64 > make[2]: *** [arch/x86/kernel/test_nx.o] Error 1 > make[1]: *** [arch/x86/kernel] Error 2 Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
travis@sgi.com authored
Change s390 percpu.h to use asm-generic/percpu.h Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
travis@sgi.com authored
Powerpc has a way to determine the address of the per cpu area of the currently executing processor via the paca and the array of per cpu offsets is avoided by looking up the per cpu area from the remote paca's (copying x86_64). Cc: Paul Mackerras <paulus@samba.org> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>
-
travis@sgi.com authored
ia64 has a special processor specific mapping that can be used to locate the offset for the current per cpu area. Cc: linux-ia64@vger.kernel.org Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
travis@sgi.com authored
Sparc64 has a way of providing the base address for the per cpu area of the currently executing processor in a global register. Sparc64 also provides a way to calculate the address of a per cpu area from a base address instead of performing an array lookup. Cc: David Miller <davem@davemloft.net> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
travis@sgi.com authored
Change: config ARCH_SETS_UP_PER_CPU_AREA to: config HAVE_SETUP_PER_CPU_AREA Cc: Andi Kleen <ak@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: linuxppc-dev@ozlabs.org Cc: linux-ia64@vger.kernel.org Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
travis@sgi.com authored
percpu_modcopy() is defined multiple times in arch files. However, the only user is module.c. Put a static definition into module.c and remove the definitions from the arch files. Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Andrew Morton authored
Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Mathieu Desnoyers authored
commit 7e991604 and commit eee3af4a Both use the same TIF number (25) in thread_info_64.h. This patch changes the TIF ids. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Jarod Wilson authored
To be more compliant with section 7.4.8 of the SBP-2 specification, use the mgt_ORB_timeout specified in the SBP-2 device's config rom for login ORB attempts (though with some sanity checks). A happy side-effect is that certain device and controller combinations that sometimes take more than 20 seconds to get synced up (like my laptop with just about any SBP-2 device) now function more reliably. Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (silenced sparse)
-
Jarod Wilson authored
Increase (and rename) the login orb reply timeout value to 20s to match that of the old firewire stack. 2s simply didn't give many devices enough time to spin up and reply. Fixes inability to recognize some devices. Failure mode was "orb reply timed out"/"failed to login". Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (style, comments, changelog)
-
Jarod Wilson authored
Replace an unnecessary subtraction with a bitwise AND when determining the value of ext_tcode in fw_fill_transaction() to save a cpu cycle or two in a somewhat critical path. Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
-
Stefan Richter authored
read_rom() obtained a fresh new fw_device.generation for each read transaction. Hence it was able to continue reading in the middle of the ROM even if a bus reset happened. However the device may have modified the ROM during the reset. We would end up with a corrupt fetched ROM image then. Although all of this is quite unlikely, it is not impossible. Therefore we now restart reading the ROM if the bus generation changed. Note, the memory barrier in read_rom() is still necessary according to tests by Jarod Wilson, despite of the ->generation access being moved up in the call chain. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> This is essentially what I've been beating on locally, and I've yet to hit another config rom read failure with it. Signed-off-by: Jarod Wilson <jwilson@redhat.com>
-