Rename traffic type enums as part of the preparation for moving
the traffic type logic to a separate file.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The channels array in struct mlx5e_rx_res is converted to a dynamic one,
which will use the dynamic value of max_nch instead of
implementation-defined maximum of MLX5E_MAX_NUM_CHANNELS.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This commit moves all implementation details of struct mlx5e_rx_res
under en/rx_res.c. All access to RX resources is now done using methods.
Encapsulating RX resources into an object allows for better
manageability, because all the implementation details are now in a
single place, and external code can use only a limited set of API
methods to init/teardown the whole thing, reconfigure RSS and LRO
parameters, connect TIRs to flow steering and activate/deactivate TIRs.

mlx5e_rx_res is self-contained and doesn't depend on struct mlx5e_priv
or include en.h.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently, struct mlx5e_channels is defined in en.h, along with a lot of
other stuff. In the following commit mlx5e_rx_res will need to get RQNs
(RQ hardware IDs), given a pointer to mlx5e_channels and the channel
index. In order to make it possible without including the whole en.h,
this commit introduces functions that will hide the implementation
details of mlx5e_channels.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Replace mlx5e_build_default_indir_rqt with a new initializer of struct
mlx5e_rss_params_indir that works directly with the struct, rather than
its internals.

The new initializer is called mlx5e_rss_params_indir_init_uniform, which
also reflects the purpose (uniform spreading) better.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Don't populate arrays on the stack but instead them static const.
Makes the object code smaller by 280 bytes.

Before:
   text    data     bss     dec     hex filename
  24142    4368     192   28702    701e ./drivers/net/phy/mscc/mscc_ptp.o

After:
   text    data     bss     dec     hex filename
  23830    4400     192   28422    6f06 ./drivers/net/phy/mscc/mscc_ptp.o

(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210801070155.139057-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Don't populate the array res_ids on the stack but instead it
static const. Makes the object code smaller by 14 bytes.

Before:
   text    data     bss     dec     hex filename
  50833    8314     256   59403    e80b ./drivers/net/netdevsim/fib.o

After:
   text    data     bss     dec     hex filename
  50755    8378     256   59389    e7fd ./drivers/net/netdevsim/fib.o

(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210801065328.138906-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Use an anonymous union with a couple of anonymous structs in order to
keep userspace unchanged:

$ pahole -C ip_msfilter net/ipv4/ip_sockglue.o
struct ip_msfilter {
	union {
		struct {
			__be32     imsf_multiaddr_aux;   /*     0     4 */
			__be32     imsf_interface_aux;   /*     4     4 */
			__u32      imsf_fmode_aux;       /*     8     4 */
			__u32      imsf_numsrc_aux;      /*    12     4 */
			__be32     imsf_slist[1];        /*    16     4 */
		};                                       /*     0    20 */
		struct {
			__be32     imsf_multiaddr;       /*     0     4 */
			__be32     imsf_interface;       /*     4     4 */
			__u32      imsf_fmode;           /*     8     4 */
			__u32      imsf_numsrc;          /*    12     4 */
			__be32     imsf_slist_flex[0];   /*    16     0 */
		};                                       /*     0    16 */
	};                                               /*     0    20 */

	/* size: 20, cachelines: 1, members: 1 */
	/* last cacheline: 20 bytes */
};

Also, refactor the code accordingly and make use of the struct_size()
and flex_array_size() helpers.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

No tagging driver uses this.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The nci_request() receives a callback function and unsigned long data
argument "opt" which is passed to the callback.  Almost all of the
nci_request() callers pass pointer to a stack variable as data argument.
Only few pass scalar value (e.g. u8).

All such callbacks do not modify passed data argument and in previous
commit they were made as const.  However passing pointers via unsigned
long removes the const annotation.  The callback could simply cast
unsigned long to a pointer to writeable memory.

Use "const void *" as type of this "opt" argument to solve this and
prevent modifying the pointed contents.  This is also consistent with
generic pattern of passing data arguments - via "void *".  In few places
which pass scalar values, use casts via "unsigned long" to suppress any
warnings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below. It has been
hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.

It has been compile tested.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is desirable to reduce the surface of DSA_TAG_PROTO_NONE as much as
we can, because we now have options for switches without hardware
support for DSA tagging, and the occurrence in the mt7530 driver is in
fact quite gratuitout and easy to remove. Since ds->ops->get_tag_protocol()
is only called for CPU ports, the checks for a CPU port in
mtk_get_tag_protocol() are redundant and can be removed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sunil Goutham says:

====================
cn10k: DWRR MTU and weights configuration

On OcteonTx2 DWRR quantum is directly configured into each of
the transmit scheduler queues. And PF/VF drivers were free to
config any value upto 2^24.

On CN10K, HW is modified, the quantum configuration at scheduler
queues is in terms of weight. And SW needs to setup a base DWRR MTU
at NIX_AF_DWRR_RPM_MTU / NIX_AF_DWRR_SDP_MTU. HW will do
'DWRR MTU * weight' to get the quantum.

This patch series addresses this HW change on CN10K silicons,
both admin function and PF/VF drivers are modified.

Also added support to program DWRR MTU via devlink params.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Program SQ, MDQ, TL4 to TL2 transmit scheduler queues' DWRR
weight based on DWRR MTU programmed at NIX_AF_DWRR_RPM_MTU.
The DWRR MTU from admin function is retrieved via mbox.

On OcteaonTx2 silicon, admin function driver responds with DWRR
MTU as '1'. This helps to avoid silicon specific transmit
scheduler DWRR quantum/weight configuration logic.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On OcteonTx2 DWRR quantum is directly configured into each of
the transmit scheduler queues. And PF/VF drivers were free to
config any value upto 2^24.

On CN10K, HW is modified, the quantum configuration at scheduler
queues is in terms of weight. And SW needs to setup a base DWRR MTU
at NIX_AF_DWRR_RPM_MTU / NIX_AF_DWRR_SDP_MTU. HW will do
'DWRR MTU * weight' to get the quantum. For LBK traffic, value
programmed into NIX_AF_DWRR_RPM_MTU register is considered as
DWRR MTU.

This patch programs a default DWRR MTU of 8192 into HW and also
provides a way to change this via devlink params.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removed the 'raw gso min size - 1' test which
always fails now:
./in_netns.sh ./psock_snd -v -c -g -l "${mss}"
  raw gso min size - 1 (expected to fail)
  tx: 1524
  rx: 1472
  OK

After commit 7c6d2ecb ("net: be more gentle about silly
gso requests coming from user"), we relaxed the min gso_size
check in virtio_net_hdr_to_skb().
So when a packet which is smaller then the gso_size,
GSO for this packet will not be set, the packet will be
send/recv successfully.
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some time ago, I reported a calltrace issue
"did not find a suitable aggregator", please see[1].
After a period of analysis and reproduction, I find
that this problem is caused by concurrency.

Before the problem occurs, the bond structure is like follows:

bond0 - slaver0(eth0) - agg0.lag_ports -> port0 - port1
                      \
                        port0
      \
        slaver1(eth1) - agg1.lag_ports -> NULL
                      \
                        port1

If we run 'ifenslave bond0 -d eth1', the process is like below:

excuting __bond_release_one()
|
bond_upper_dev_unlink()[step1]
|                       |                       |
|                       |                       bond_3ad_lacpdu_recv()
|                       |                       ->bond_3ad_rx_indication()
|                       |                       spin_lock_bh()
|                       |                       ->ad_rx_machine()
|                       |                       ->__record_pdu()[step2]
|                       |                       spin_unlock_bh()
|                       |                       |
|                       bond_3ad_state_machine_handler()
|                       spin_lock_bh()
|                       ->ad_port_selection_logic()
|                       ->try to find free aggregator[step3]
|                       ->try to find suitable aggregator[step4]
|                       ->did not find a suitable aggregator[step5]
|                       spin_unlock_bh()
|                       |
|                       |
bond_3ad_unbind_slave() |
spin_lock_bh()
spin_unlock_bh()

step1: already removed slaver1(eth1) from list, but port1 remains
step2: receive a lacpdu and update port0
step3: port0 will be removed from agg0.lag_ports. The struct is
       "agg0.lag_ports -> port1" now, and agg0 is not free. At the
	   same time, slaver1/agg1 has been removed from the list by step1.
	   So we can't find a free aggregator now.
step4: can't find suitable aggregator because of step2
step5: cause a calltrace since port->aggregator is NULL

To solve this concurrency problem, put bond_upper_dev_unlink()
after bond_3ad_unbind_slave(). In this way, we can invalid the port
first and skip this port in bond_3ad_state_machine_handler(). This
eliminates the situation that the slaver has been removed from the
list but the port is still valid.

[1]https://lore.kernel.org/netdev/10374.1611947473@famine/Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TC action ->init() API has 10 parameters, it becomes harder
to read. Some of them are just boolean and can be replaced
by flags. Similarly for the internal API tcf_action_init()
and tcf_exts_validate().

This patch converts them to flags and fold them into
the upper 16 bits of "flags", whose lower 16 bits are still
reserved for user-space. More specifically, the following
kernel flags are introduced:

TCA_ACT_FLAGS_POLICE replace 'name' in a few contexts, to
distinguish whether it is compatible with policer.

TCA_ACT_FLAGS_BIND replaces 'bind', to indicate whether
this action is bound to a filter.

TCA_ACT_FLAGS_REPLACE  replaces 'ovr' in most contexts,
means we are replacing an existing action.

TCA_ACT_FLAGS_NO_RTNL replaces 'rtnl_held' but has the
opposite meaning, because we still hold RTNL in most
cases.

The only user-space flag TCA_ACT_FLAGS_NO_PERCPU_STATS is
untouched and still stored as before.

I have tested this patch with tdc and I do not see any
failure related to this patch.
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In three places, the driver calls of_get_property and reads the property
length although the length is not used. Update the calls to not request
the length.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrii Nakryiko says:

====================
bpf-next 2021-07-30

We've added 64 non-merge commits during the last 15 day(s) which contain
a total of 83 files changed, 5027 insertions(+), 1808 deletions(-).

The main changes are:

1) BTF-guided binary data dumping libbpf API, from Alan.

2) Internal factoring out of libbpf CO-RE relocation logic, from Alexei.

3) Ambient BPF run context and cgroup storage cleanup, from Andrii.

4) Few small API additions for libbpf 1.0 effort, from Evgeniy and Hengqi.

5) bpf_program__attach_kprobe_opts() fixes in libbpf, from Jiri.

6) bpf_{get,set}sockopt() support in BPF iterators, from Martin.

7) BPF map pinning improvements in libbpf, from Martynas.

8) Improved module BTF support in libbpf and bpftool, from Quentin.

9) Bpftool cleanups and documentation improvements, from Quentin.

10) Libbpf improvements for supporting CO-RE on old kernels, from Shuyi.

11) Increased maximum cgroup storage size, from Stanislav.

12) Small fixes and improvements to BPF tests and samples, from various folks.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
  tools: bpftool: Complete metrics list in "bpftool prog profile" doc
  tools: bpftool: Document and add bash completion for -L, -B options
  selftests/bpf: Update bpftool's consistency script for checking options
  tools: bpftool: Update and synchronise option list in doc and help msg
  tools: bpftool: Complete and synchronise attach or map types
  selftests/bpf: Check consistency between bpftool source, doc, completion
  tools: bpftool: Slightly ease bash completion updates
  unix_bpf: Fix a potential deadlock in unix_dgram_bpf_recvmsg()
  libbpf: Add btf__load_vmlinux_btf/btf__load_module_btf
  tools: bpftool: Support dumping split BTF by id
  libbpf: Add split BTF support for btf__load_from_kernel_by_id()
  tools: Replace btf__get_from_id() with btf__load_from_kernel_by_id()
  tools: Free BTF objects at various locations
  libbpf: Rename btf__get_from_id() as btf__load_from_kernel_by_id()
  libbpf: Rename btf__load() as btf__load_into_kernel()
  libbpf: Return non-null error on failures in libbpf_find_prog_btf_id()
  bpf: Emit better log message if bpf_iter ctx arg btf_id == 0
  tools/resolve_btfids: Emit warnings and patch zero id for missing symbols
  bpf: Increase supported cgroup storage value size
  libbpf: Fix race when pinning maps in parallel
  ...
====================

Link: https://lore.kernel.org/r/20210730225606.1897330-1-andrii@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Conflicting commits, all resolutions pretty trivial:

drivers/bus/mhi/pci_generic.c
  5c2c8531 ("bus: mhi: pci-generic: configurable network interface MRU")
  56f6f4c4 ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")

drivers/nfc/s3fwrn5/firmware.c
  a0302ff5 ("nfc: s3fwrn5: remove unnecessary label")
  46573e3a ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
  801e541c ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")

MAINTAINERS
  7d901a1e ("net: phy: add Maxlinear GPY115/21x/24x driver")
  8a7b46fa ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
  (mac80211) and netfilter trees.

  Current release - regressions:

   - mac80211: fix starting aggregation sessions on mesh interfaces

  Current release - new code bugs:

   - sctp: send pmtu probe only if packet loss in Search Complete state

   - bnxt_en: add missing periodic PHC overflow check

   - devlink: fix phys_port_name of virtual port and merge error

   - hns3: change the method of obtaining default ptp cycle

   - can: mcba_usb_start(): add missing urb->transfer_dma initialization

  Previous releases - regressions:

   - set true network header for ECN decapsulation

   - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
     LRO

   - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
     PHY

   - sctp: fix return value check in __sctp_rcv_asconf_lookup

  Previous releases - always broken:

   - bpf:
       - more spectre corner case fixes, introduce a BPF nospec
         instruction for mitigating Spectre v4
       - fix OOB read when printing XDP link fdinfo
       - sockmap: fix cleanup related races

   - mac80211: fix enabling 4-address mode on a sta vif after assoc

   - can:
       - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
       - j1939: j1939_session_deactivate(): clarify lifetime of session
         object, avoid UAF
       - fix number of identical memory leaks in USB drivers

   - tipc:
       - do not blindly write skb_shinfo frags when doing decryption
       - fix sleeping in tipc accept routine"

* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  gve: Update MAINTAINERS list
  can: esd_usb2: fix memory leak
  can: ems_usb: fix memory leak
  can: usb_8dev: fix memory leak
  can: mcba_usb_start(): add missing urb->transfer_dma initialization
  can: hi311x: fix a signedness bug in hi3110_cmd()
  MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
  bpf: Fix leakage due to insufficient speculative store bypass mitigation
  bpf: Introduce BPF nospec instruction for mitigating Spectre v4
  sis900: Fix missing pci_disable_device() in probe and remove
  net: let flow have same hash in two directions
  nfc: nfcsim: fix use after free during module unload
  tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
  sctp: fix return value check in __sctp_rcv_asconf_lookup
  nfc: s3fwrn5: fix undefined parameter values in dev_err()
  net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
  net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
  net/mlx5: Unload device upon firmware fatal error
  net/mlx5e: Fix page allocation failure for ptp-RQ over SF
  net/mlx5e: Fix page allocation failure for trap-RQ over SF
  ...

Pull ACPI fixes from Rafael Wysocki:
 "These revert a recent IRQ resources handling modification that turned
  out to be problematic, fix suspend-to-idle handling on AMD platforms
  to take upcoming systems into account properly and fix the retrieval
  of the DPTF attributes of the PCH FIVR.

  Specifics:

   - Revert recent change of the ACPI IRQ resources handling that
     attempted to improve the ACPI IRQ override selection logic, but
     introduced serious regressions on some systems (Hui Wang).

   - Fix up quirks for AMD platforms in the suspend-to-idle support code
     so as to take upcoming systems using uPEP HID AMDI007 into account
     as appropriate (Mario Limonciello).

   - Fix the code retrieving DPTF attributes of the PCH FIVR so that it
     agrees on the return data type with the ACPI control method
     evaluated for this purpose (Srinivas Pandruvada)"

* tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Fix reading of attributes
  Revert "ACPI: resources: Add checks for ACPI IRQ override"
  ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007

Since commit 1b6b26ae ("pipe: fix and clarify pipe write wakeup
logic") we have sanitized the pipe write logic, and would only try to
wake up readers if they needed it.

In particular, if the pipe already had data in it before the write,
there was no point in trying to wake up a reader, since any existing
readers must have been aware of the pre-existing data already.  Doing
extraneous wakeups will only cause potential thundering herd problems.

However, it turns out that some Android libraries have misused the EPOLL
interface, and expected "edge triggered" be to "any new write will
trigger it".  Even if there was no edge in sight.

Quoting Sandeep Patil:
 "The commit 1b6b26ae ('pipe: fix and clarify pipe write wakeup
  logic') changed pipe write logic to wakeup readers only if the pipe
  was empty at the time of write. However, there are libraries that
  relied upon the older behavior for notification scheme similar to
  what's described in [1]

  One such library 'realm-core'[2] is used by numerous Android
  applications. The library uses a similar notification mechanism as GNU
  Make but it never drains the pipe until it is full. When Android moved
  to v5.10 kernel, all applications using this library stopped working.

  The library has since been fixed[3] but it will be a while before all
  applications incorporate the updated library"

Our regression rule for the kernel is that if applications break from
new behavior, it's a regression, even if it was because the application
did something patently wrong.  Also note the original report [4] by
Michal Kerrisk about a test for this epoll behavior - but at that point
we didn't know of any actual broken use case.

So add the extraneous wakeup, to approximate the old behavior.

[ I say "approximate", because the exact old behavior was to do a wakeup
  not for each write(), but for each pipe buffer chunk that was filled
  in. The behavior introduced by this change is not that - this is just
  "every write will cause a wakeup, whether necessary or not", which
  seems to be sufficient for the broken library use. ]

It's worth noting that this adds the extraneous wakeup only for the
write side, while the read side still considers the "edge" to be purely
about reading enough from the pipe to allow further writes.

See commit f467a6a6 ("pipe: fix and clarify pipe read wakeup logic")
for the pipe read case, which remains that "only wake up if the pipe was
full, and we read something from it".

Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1]
Link: https://github.com/realm/realm-core [2]
Link: https://github.com/realm/realm-core/issues/4666 [3]
Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4]
Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/Reported-by: Sandeep Patil <sspatil@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Quentin Monnet says:

====================

To work with the different program types, map types, attach types etc.
supported by eBPF, bpftool needs occasional updates to learn about the new
features supported by the kernel. When such types translate into new
keyword for the command line, updates are expected in several locations:
typically, the help message displayed from bpftool itself, the manual page,
and the bash completion file should be updated. The options used by the
different commands for bpftool should also remain synchronised at those
locations.

Several omissions have occurred in the past, and a number of types are
still missing today. This set is an attempt to improve the situation. It
brings up-to-date the lists of types or options in bpftool, and also adds a
Python script to the BPF selftests to automatically check that most of
these lists remain synchronised.

v2:
- Reformat some lines in the bash completion file.
- Do not reformat attach types, to preserve git-blame history.
- Do not call Python script from tools/testing/selftests/bpf/Makefile.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

Profiling programs with bpftool was extended some time ago to support
two new metrics, namely itlb_misses and dtlb_misses (misses for the
instruction/data translation lookaside buffer). Update the manual page
and bash completion accordingly.

Fixes: 450d060e ("bpftool: Add {i,d}tlb_misses support for bpftool profile")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-8-quentin@isovalent.com

The -L|--use-loader option for using loader programs when loading, or
when generating a skeleton, did not have any documentation or bash
completion. Same thing goes for -B|--base-btf, used to pass a path to a
base BTF object for split BTF such as BTF for kernel modules.

This patch documents and adds bash completion for those options.

Fixes: 75fa1777 ("tools/bpftool: Add bpftool support for split BTF")
Fixes: d510296d ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-7-quentin@isovalent.com

Update the script responsible for checking that the different types used
at various places in bpftool are synchronised, and extend it to check
the consistency of options between the help messages in the source code
and the manual pages.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-6-quentin@isovalent.com

All bpftool commands support the options for JSON output and debug from
libbpf. In addition, some commands support additional options
corresponding to specific use cases.

The list of options described in the man pages for the different
commands are not always accurate. The messages for interactive help are
mostly limited to HELP_SPEC_OPTIONS, and are even less representative of
the actual set of options supported for the commands.

Let's update the lists:

- HELP_SPEC_OPTIONS is modified to contain the "default" options (JSON
  and debug), and to be extensible (no ending curly bracket).
- All commands use HELP_SPEC_OPTIONS in their help message, and then
  complete the list with their specific options.
- The lists of options in the man pages are updated.
- The formatting of the list for bpftool.rst is adjusted to match
  formatting for the other man pages. This is for consistency, and also
  because it will be helpful in a future patch to automatically check
  that the files are synchronised.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-5-quentin@isovalent.com

Update bpftool's list of attach type names to tell it about the latest
attach types, or the "ringbuf" map. Also update the documentation, help
messages, and bash completion when relevant.

These missing items were reported by the newly added Python script used
to help maintain consistency in bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-4-quentin@isovalent.com

Whenever the eBPF subsystem gains new elements, such as new program or
map types, it is necessary to update bpftool if we want it able to
handle the new items.

In addition to the main arrays containing the names of these elements in
the source code, there are also multiple locations to update:

- The help message in the do_help() functions in bpftool's source code.
- The RST documentation files.
- The bash completion file.

This has led to omissions multiple times in the past. This patch
attempts to address this issue by adding consistency checks for all
these different locations. It also verifies that the bpf_prog_type,
bpf_map_type and bpf_attach_type enums from the UAPI BPF header have all
their members present in bpftool.

The script requires no argument to run, it reads and parses the
different files to check, and prints the mismatches, if any. It
currently reports a number of missing elements, which will be fixed in a
later patch:

  $ ./test_bpftool_synctypes.py
  Comparing [...]/linux/tools/bpf/bpftool/map.c (map_type_name) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_MAP_CREATE_TYPES): {'ringbuf'}
  Comparing BPF header (enum bpf_attach_type) and [...]/linux/tools/bpf/bpftool/common.c (attach_type_name): {'BPF_TRACE_ITER', 'BPF_XDP_DEVMAP', 'BPF_XDP', 'BPF_SK_REUSEPORT_SELECT', 'BPF_XDP_CPUMAP', 'BPF_SK_REUSEPORT_SELECT_OR_MIGRATE'}
  Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/prog.c (do_help() ATTACH_TYPE): {'skb_verdict'}
  Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/Documentation/bpftool-prog.rst (ATTACH_TYPE): {'skb_verdict'}
  Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_PROG_ATTACH_TYPES): {'skb_verdict'}

Note that the script does NOT check for consistency between the list of
program types that bpftool claims it accepts and the actual list of
keywords that can be used. This is because bpftool does not "see" them,
they are ELF section names parsed by libbpf. It is not hard to parse the
section_defs[] array in libbpf, but some section names are associated
with program types that bpftool cannot load at the moment. For example,
some programs require a BTF target and an attach target that bpftool
cannot handle. The script may be extended to parse the array and check
only relevant values in the future.

The script is not added to the selftests' Makefile, because doing so
would require all patches with BPF UAPI change to also update bpftool.
Instead it is to be added to the CI.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-3-quentin@isovalent.com

Bash completion for bpftool gets two minor improvements in this patch.

Move the detection of attach types for "bpftool cgroup attach" outside
of the "case/esac" bloc, where we cannot reuse our variable holding the
list of supported attach types as a pattern list. After the change, we
have only one list of cgroup attach types to update when new types are
added, instead of the former two lists.

Also rename the variables holding lists of names for program types, map
types, and attach types, to make them more unique. This can make it
slightly easier to point people to the relevant variables to update, but
the main objective here is to help run a script to check that bash
completion is up-to-date with bpftool's source code.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-2-quentin@isovalent.com

Leon Romanovsky says:

====================
Clean devlink net namespace operations

This short series continues my work on devlink core code to make devlink
reload less prone to errors and harden it from API abuse.

Despite first patch being a clear fix, I would ask you to apply it to
net-next anyway, because the fixed patch is anyway old and it will
help us to eliminate merge conflicts that will arise for following
patches or even for the second one.
====================

Link: https://lore.kernel.org/r/cover.1627578998.git.leonro@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is no need in extra call indirection and check from impossible
flow where someone tries to set namespace without prior call
to devlink_alloc().

Instead of this extra logic and additional EXPORT_SYMBOL, use specialized
devlink allocation function that receives net namespace as an argument.

Such specialized API allows clear view when devlink initialized in wrong
net namespace and/or kernel users don't try to change devlink namespace
under the hood.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The change of namespaces during devlink reload calls to driver unload
before it accesses devlink parameters. The commands below causes to
use-after-free bug when trying to get flow steering mode.

 * ip netns add n1
 * devlink dev reload pci/0000:00:09.0 netns n1

 ==================================================================
 BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
 Read of size 4 at addr ffff888009d04308 by task devlink/275

 CPU: 6 PID: 275 Comm: devlink Not tainted 5.12.0-rc2+ #2853
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Call Trace:
  dump_stack+0x93/0xc2
  print_address_description.constprop.0+0x18/0x140
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  kasan_report.cold+0x7c/0xd8
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  devlink_nl_param_fill+0x1c8/0xe80
  ? __free_pages_ok+0x37a/0x8a0
  ? devlink_flash_update_timeout_notify+0xd0/0xd0
  ? lock_acquire+0x1a9/0x6d0
  ? fs_reclaim_acquire+0xb7/0x160
  ? lock_is_held_type+0x98/0x110
  ? 0xffffffff81000000
  ? lock_release+0x1f9/0x6c0
  ? fs_reclaim_release+0xa1/0xf0
  ? lock_downgrade+0x6d0/0x6d0
  ? lock_is_held_type+0x98/0x110
  ? lock_is_held_type+0x98/0x110
  ? memset+0x20/0x40
  ? __build_skb_around+0x1f8/0x2b0
  devlink_param_notify+0x6d/0x180
  devlink_reload+0x1c3/0x520
  ? devlink_remote_reload_actions_performed+0x30/0x30
  ? mutex_trylock+0x24b/0x2d0
  ? devlink_nl_cmd_reload+0x62b/0x1070
  devlink_nl_cmd_reload+0x66d/0x1070
  ? devlink_reload+0x520/0x520
  ? devlink_get_from_attrs+0x1bc/0x260
  ? devlink_nl_pre_doit+0x64/0x4d0
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  ? mutex_lock_io_nested+0x1130/0x1130
  ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
  ? security_capable+0x51/0x90
  genl_rcv_msg+0x27f/0x4a0
  ? genl_get_cmd+0x3c0/0x3c0
  ? lock_acquire+0x1a9/0x6d0
  ? devlink_reload+0x520/0x520
  ? lock_release+0x6c0/0x6c0
  netlink_rcv_skb+0x11d/0x340
  ? genl_get_cmd+0x3c0/0x3c0
  ? netlink_ack+0x9f0/0x9f0
  ? lock_release+0x1f9/0x6c0
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  ? netlink_attachskb+0x730/0x730
  ? _copy_from_iter_full+0x178/0x650
  ? __alloc_skb+0x113/0x2b0
  netlink_sendmsg+0x6f1/0xbd0
  ? netlink_unicast+0x700/0x700
  ? lock_is_held_type+0x98/0x110
  ? netlink_unicast+0x700/0x700
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  ? __x64_sys_getpeername+0xb0/0xb0
  ? do_sys_openat2+0x10b/0x370
  ? __up_read+0x1a1/0x7b0
  ? do_user_addr_fault+0x219/0xdc0
  ? __x64_sys_openat+0x120/0x1d0
  ? __x64_sys_open+0x1a0/0x1a0
  __x64_sys_sendto+0xdd/0x1b0
  ? syscall_enter_from_user_mode+0x1d/0x50
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7fc69d0af14a
 Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
 RSP: 002b:00007ffc1d8292f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fc69d0af14a
 RDX: 0000000000000038 RSI: 0000555f57c56440 RDI: 0000000000000003
 RBP: 0000555f57c56410 R08: 00007fc69d17b200 R09: 000000000000000c
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

 Allocated by task 146:
  kasan_save_stack+0x1b/0x40
  __kasan_kmalloc+0x99/0xc0
  mlx5_init_fs+0xf0/0x1c50 [mlx5_core]
  mlx5_load+0xd2/0x180 [mlx5_core]
  mlx5_init_one+0x2f6/0x450 [mlx5_core]
  probe_one+0x47d/0x6e0 [mlx5_core]
  pci_device_probe+0x2a0/0x4a0
  really_probe+0x20a/0xc90
  driver_probe_device+0xd8/0x380
  device_driver_attach+0x1df/0x250
  __driver_attach+0xff/0x240
  bus_for_each_dev+0x11e/0x1a0
  bus_add_driver+0x309/0x570
  driver_register+0x1ee/0x380
  0xffffffffa06b8062
  do_one_initcall+0xd5/0x410
  do_init_module+0x1c8/0x760
  load_module+0x6d8b/0x9650
  __do_sys_finit_module+0x118/0x1b0
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 Freed by task 275:
  kasan_save_stack+0x1b/0x40
  kasan_set_track+0x1c/0x30
  kasan_set_free_info+0x20/0x30
  __kasan_slab_free+0x102/0x140
  slab_free_freelist_hook+0x74/0x1b0
  kfree+0xd7/0x2a0
  mlx5_unload+0x16/0xb0 [mlx5_core]
  mlx5_unload_one+0xae/0x120 [mlx5_core]
  mlx5_devlink_reload_down+0x1bc/0x380 [mlx5_core]
  devlink_reload+0x141/0x520
  devlink_nl_cmd_reload+0x66d/0x1070
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  genl_rcv_msg+0x27f/0x4a0
  netlink_rcv_skb+0x11d/0x340
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  netlink_sendmsg+0x6f1/0xbd0
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  __x64_sys_sendto+0xdd/0x1b0
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 The buggy address belongs to the object at ffff888009d04300
  which belongs to the cache kmalloc-128 of size 128
 The buggy address is located 8 bytes inside of
  128-byte region [ffff888009d04300, ffff888009d04380)
 The buggy address belongs to the page:
 page:0000000086a64ecc refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888009d04000 pfn:0x9d04
 head:0000000086a64ecc order:1 compound_mapcount:0
 flags: 0x4000000000010200(slab|head)
 raw: 4000000000010200 ffffea0000203980 0000000200000002 ffff8880050428c0
 raw: ffff888009d04000 000000008020001d 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff888009d04200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888009d04280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 >ffff888009d04300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff888009d04380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff888009d04400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ==================================================================

The right solution to devlink reload is to notify about deletion of
parameters, unload driver, change net namespaces, load driver and notify
about addition of parameters.

Fixes: 070c63f2 ("net: devlink: allow to change namespaces during reload")
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As Eric noticed, __unix_dgram_recvmsg() may acquire u->iolock
too, so we have to release it before calling this function.

Fixes: 9825d866 ("af_unix: Implement unix_dgram_bpf_recvmsg()")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>

Add two new APIs: btf__load_vmlinux_btf and btf__load_module_btf.
btf__load_vmlinux_btf is just an alias to the existing API named
libbpf_find_kernel_btf, rename to be more precisely and consistent
with existing BTF APIs. btf__load_module_btf can be used to load
module BTF, add it for completeness. These two APIs are useful for
implementing tracing tools and introspection tools. This is part
of the effort towards libbpf 1.0 ([0]).

  [0] Closes: https://github.com/libbpf/libbpf/issues/280Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730114012.494408-1-hengqi.chen@gmail.com

If skb_dst_set_noref() is invoked with a NULL dst, the 'slow_gro'
field is cleared, too. That could lead to wrong behavior if
the skb later enters the GRO stage.

Fix the potential issue replacing preserving a non-zero value of
the 'slow_gro' field.

Additionally, fix a comment typo.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 8a886b14 ("sk_buff: track dst status in slow_gro")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/aa42529252dc8bb02bd42e8629427040d1058537.1627662501.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

* acpi-resources:
  Revert "ACPI: resources: Add checks for ACPI IRQ override"

* acpi-dptf:
  ACPI: DPTF: Fix reading of attributes

Pull block fixes from Jens Axboe:

 - gendisk freeing fix (Christoph)

 - blk-iocost wake ordering fix (Tejun)

 - tag allocation error handling fix (John)

 - loop locking fix. While this isn't the prettiest fix in the world,
   nobody has any good alternatives for 5.14. Something to likely
   revisit for 5.15. (Tetsuo)

* tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  block: delay freeing the gendisk
  blk-iocost: fix operation ordering in iocg_wake_fn()
  blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling
  loop: reintroduce global lock for safe loop_validate_file() traversal