- 13 Oct, 2006 6 commits
-
-
Oliver Endriss authored
Backport the budget driver DISEQC instability fix. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org>
-
Andrew de Quincey authored
Backport fix to artec USB DVB devices Signed-off-by:
Adrian Bunk <bunk@stusta.de>
-
Andrew de Quincey authored
The budget-av needs this GPIO set low for most cards to work. Signed-off-by:
-
Ang Way Chuang authored
ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation code has a bug that allows an attacker to send a malformed ULE packet with SNDU length of 0 and bring down the receiving machine. This patch fix the bug and has been tested on version 2.6.17.11. This bug is 100% reproducible and the modified source code (GPL) used to produce this bug will be posted on http://nrg.cs.usm.my/downloads.htm shortly. The kernel will produce a dump during CRC32 checking on faulty ULE packet. Signed-off-by:
Ang Way Chuang <wcang@nrg.cs.usm.my> Signed-off-by:
-
YOSHIFUJI Hideaki authored
This patch fixes RTNLGRP_IPV6_IFINFO netlink notifications. Issue pointed out by Patrick McHardy <kaber@trash.net>. Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Kirill Korotaev authored
When found, it is obvious. nfds calculated when allocating fdsets is rewritten by calculation of size of fdtable, and when we are unlucky, we try to free fdsets of wrong size. Found due to OpenVZ resource management (User Beancounters). Signed-off-by:
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by:
Kirill Korotaev <dev@openvz.org> Signed-off-by:
-
- 22 Sep, 2006 5 commits
-
-
Adrian Bunk authored
-
Henk Vergonet authored
Keys on Yealink based phones will not function properly when using the generic HID driver. This patch prevents the generic HID code from grabbing the device before the regular yealink driver can get a grip on it. Signed-off-by:
Henk Vergonet <Henk.Vergonet@gmail.com> Signed-off-by:
Vojtech Pavlik <vojtech@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Henk Vergonet authored
This patch fixes a memory leak and a kernel oops when trying to unload the driver, due to an unbalanced cleanup. Thanks Ivar Jensen for spotting my mistake. Signed-off-by:
-
Martin Schwidefsky authored
There is a race between call_usermodehelper_keys, __call_usermodehelper and wait_for_helper. It should only happen if preemption is enabled or on a virtualized system. If the cpu is preempted or put to sleep by the hypervisor in __call_usermodehelper between the creation of the wait_for_helper thread and the second check on sub_info->wait, the whole execution of wait_for_helper including the complete call and the continuation after the wait_for_completion in call_usermodehelper_keys can have happened before __call_usermodehelper checks sub_info->wait for the second time. Since sub_info can already have been clobbered, sub_info->wait could be zero and complete is called a second time with an invalid argument. This has happened on s390. It took me only three days to find out .. Thanks to Arnd Bergmann for his help to spot this bug. Kenneth Lee also sent the same patch independently. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Mark M. Hoffman authored
This patch fixes a bug in the handling of 'ignore' module parameters of I2C client drivers. Signed-off-by:
Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
- 18 Sep, 2006 8 commits
-
-
Hartmut Hackmann authored
This patch - works around a bug in the I2C bridge that makes the initialization of the TDA10046 fail on recent LifeView cards - puts the AGC output to tristate in sleep mode. This is necessary for recent hybrid cards that switch the AGC via tristateing. Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by:
-
Roland Dreier authored
Currently, the code in lib/idr.c uses a bare spin_lock(&idp->lock) to do internal locking. This is a nasty trap for code that might call idr functions from different contexts; for example, it seems perfectly reasonable to call idr_get_new() from process context and idr_remove() from interrupt context -- but with the current locking this would lead to a potential deadlock. The simplest fix for this is to just convert the idr locking to use spin_lock_irqsave(). In particular, this fixes a very complicated locking issue detected by lockdep, involving the ib_ipoib driver's priv->lock and dev->_xmit_lock, which get involved with the ib_sa module's query_idr.lock. Signed-off-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Michael Rash authored
The pattern is set after trying to compute the prefix table, which tries to use it. Initialize it before calling compute_prefix_tbl, make compute_prefix_tbl consistently use only the data from struct ts_bm and remove the now unnecessary arguments. Signed-off-by:
Michael Rash <mbr@cipherdyne.org> Signed-off-by:
David Miller <davem@davemloft.net> Signed-off-by:
-
Jay Cliburn authored
The via-velocity driver reports incorrect speed and link detected status as viewed by ethtool (and probably other tools). This patch fixes those incorrect reports and prettifies a long line. Signed-off-by:
Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Roy Marples authored
The patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=6711Signed-off-by:
Roy Marples <uberlord@gentoo.org> Signed-off-by:
-
Magnus Kessler authored
This patch enables agpgart on a Via "PT880 Ultra" based motherboard (Asus P4V800D-X). The PCI ID of the PT880 Ultra is 0x0308 instead of 0x0258 of the PT880. The patched via-agp passes testgart. Signed-off-by:
Magnus Kessler <Magnus.Kessler@gmx.net> Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Julien Tous authored
From: Julien Tous <julien.tous@gmail.com> Signed-off-by:
-
Tushar Gohad authored
Fixes inconsistent use of "uint32_t" vs. "u_int32_t". Fix pfkeyv2 userspace builds. Signed-off-by:
Tushar Gohad <tgohad@mvista.com> Signed-off-by:
-
- 16 Sep, 2006 21 commits
-
-
Hartmut Hackmann authored
- Set outputs to tristate in sleep mode - Reduce dangerously high firmware download speed with 16MHz xtal - added tda827x configuration with GPIOs low - added comments to stupid looking IIC reads that work around bugs in the tda10046. - some minor updates Signed-off-by:
-
Adrian Bunk authored
based on drivers/media/common/ir-keymaps.c:ir_codes_flydvb in Linus' tree. Signed-off-by: -
Hartmut Hackmann authored
There seem to be many variants of this cards with different feature sets. This entry supports analog TV, CVBS and s-video input, FM radio and DVB-T if they are supported by the hardware. Signed-off-by:
-
Hartmut Hackmann authored
The .vmux entry needs to be 1 instead of 0 Signed-off-by:
-
Hartmut Hackmann authored
Added ID entries for the Genius VideoWonder DVB-T and the LifeView FlyTV Platinum Gold Signed-off-by:
-
maximilian attems authored
The saa7134 drivers uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by:
maximilian attems <maks@sternwelten.at> Signed-off-by:
-
Michael Krufky authored
The device, Medion 7134, has two saa7134 chips on it, but only one of them is functional in the current saa7134 driver. This patch adds autodetection for the second, unsupported saa7134 chip, as SAA7134_BOARD_MD7134_BRIDGE_2, and displays a message to the user (in dmesg) indicating that the second chip isn't yet functional. This is useful for users, since two instances of the saa7134 driver will spawn. This patch will prevent confusion by warning the user that only one of the chips on the board are functional. There are other versions of the SAA7134_BOARD_MD7134 with only a single saa7134 bridge/decoder -- those devices will not be affected by this patch. Only devices containing the second chip will display the warning. Signed-off-by:
-
Michael Krufky authored
There are already some supported devices that contain two saa713x chips on-board, where only one of these chips is currently functional in the driver. We are already printing a warning message for the second saa7134 decoder in SAA7134_BOARD_AVERMEDIA_A169_B. This patch alters that case to make it generic, so that other cards in the same situation can use it. Signed-off-by:
-
Rickard Osser authored
- Added support for AVerMedia A169 Dual Analog tuner card (dual saa7134 decoders - only 1 working right now) - Added autodetection for both parts of the card. It shows up like 2 cards, B1 and B - Enabled tuner B1, SVIDEO on B1 and composite1 through SVIDEO, FIXME: B is more or less dead at this point and I suspect the FM-radio is on the B part of the board Adrian Bunk: slightly adapted to 2.6.16 Signed-off-by:
Rickard Osser <ricky@osser.se> Signed-off-by:
-
Adrian Bunk authored
I have the same card with the same PCI id, but from KWorld. The patch documents that this is the same card. Signed-off-by:
-
TAMUKI Shoichi authored
- Corrected autodetection for saa7130 card: subsystem: 1048:226c, board: ELSA EX-VISION 700TV Signed-off-by:
TAMUKI Shoichi <tamuki@linet.gr.jp> Signed-off-by:
-
Curt Meyers authored
- Enable the tuv1236 tuner on the Kworld-ATSC110 card so that the tuner can be identified when tuners.ko loads. - With this change it is no longer necessary to remove and reload the tuner module in order to get the tuv1236 identified. - This code was copied from the ATI HDTV Wonder init routine (in cx88-cards.c) which also uses the TUV1236D. Signed-off-by:
Curt Meyers <cmeyers@boilerbots.com> Signed-off-by:
-
Michael Krufky authored
- There is no radio with this tuner card... Thanks-to: Dwaine Garden <DwaineGarden@rogers.com> - fixed capitalization in card name. Signed-off-by:
-
Curt Meyers authored
- corrected composite input. - verified s-video input. Signed-off-by:
-
Curt Meyers authored
- When tuning VSB, use ANT input - When tuning QAM, use CABLE input Signed-off-by:
-
Andrew Burri authored
Signed-off-by:
Andrew Burri <andrew.burri@gmail.com> Signed-off-by:
-
Tamuki Shoichi authored
Add support for ELSA EX-VISION 700TV, which is the ELSA Japan's flagship model of the software encoding TV capture card. All inputs (Television, Composite1 and S-Video) have been tested. Signed-off-by:
-
Hartshorn authored
This is an analog / digital hybrid card. Signed-off-by:
Peter Hartshorn <p3r@users.sourceforge.net> Signed-off-by:
-
Hartmut Hackmann authored
Analog and DVB-T are working, Remote not yet. This card is based on the new LifeView design, there should be many variants. Signed-off-by:
-
Giampiero Giancipoli authored
Additionally to the card support, this changeset adds the option tda10046lifeview to get_dvb_firmware to download tda10046 firmware from LifeView's site. Signed-off-by:
Giampiero Giancipoli <gianci@libero.it> Signed-off-by:
-
Jose Alberto Reguero authored
Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
