- 28 Jan, 2008 40 commits
-
-
Stephen Hemminger authored
SFQ doesn't need true random numbers, it is only using them to salt a hash. Therefore it is better to use net_random() and avoid any possible problems with depleting the entropy pool. Signed-off-by:
Stephen Hemminger <stephen.hemminger@vyatta.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The perturbation timer used for re-keying can be deferred, it doesn't need to be deterministic. Signed-off-by:
-
Denis V. Lunev authored
Save namespace context on the fib rule at the rule creation time and call routing lookup in the correct namespace. Signed-off-by:
Denis V. Lunev <den@openvz.org> Acked-by:
Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by:
-
Denis V. Lunev authored
Remove struct net from fib_rules_register(unregister)/notify_change paths and diet code size a bit. add/remove: 0/0 grow/shrink: 10/12 up/down: 35/-100 (-65) function old new delta notify_rule_change 273 280 +7 trie_show_stats 471 475 +4 fn_trie_delete 473 477 +4 fib_rules_unregister 144 148 +4 fib4_rule_compare 119 123 +4 resize 2842 2845 +3 fn_trie_select_default 515 518 +3 inet_sk_rebuild_header 836 838 +2 fib_trie_seq_show 764 766 +2 __devinet_sysctl_register 276 278 +2 fn_trie_lookup 1124 1123 -1 ip_fib_check_default 133 131 -2 devinet_conf_sysctl 223 221 -2 snmp_fold_field 126 123 -3 fn_trie_insert 2091 2086 -5 inet_create 876 870 -6 fib4_rules_init 197 191 -6 fib_sync_down 452 444 -8 inet_gso_send_check 334 325 -9 fib_create_info 3003 2991 -12 fib_nl_delrule 568 553 -15 fib_nl_newrule 883 852 -31 Signed-off-by:
-
Denis V. Lunev authored
The backward link from FIB rules operations to the network namespace will allow to simplify the API a bit. Signed-off-by:
-
Vlad Yasevich authored
When parameter validation fails, there should be error causes that specify what type of failure we've encountered. If the causes are not there, we lacked memory to allocated them. Thus make that the default value for the error. Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Samuel Ortiz <samuel@sortiz.org> Signed-off-by:
-
Adrian Bunk authored
This patch removes IrPORT and the old dongle drivers (all off them have replacement drivers). Signed-off-by:
-
Robie Basak authored
When using a stir4200-based USB adaptor to talk to a device that uses an mcp2150, the stir4200 sometimes drops an incoming frame causing the mcp2150 to try and retransmit the lost frame. In this combination, the next frame received from the mcp2150 is often invalid - either an empty i:rsp or an IrCOMM i:rsp with an invalid clen. These corner cases are now checked. Signed-off-by:
Robie Basak <rb-oss-1@justgohome.co.uk> Signed-off-by:
-
Robie Basak authored
When final timer expires, it might also mean that the i:cmd wasn't received properly. If we have rejected frames, we can try to resend them. Signed-off-by:
-
Denis V. Lunev authored
During network namespace stop process kernel side netlink sockets belonging to a namespace should be closed. They should not prevent namespace to stop, so they do not increment namespace usage counter. Though this counter will be put during last sock_put. The raplacement of the correct netns for init_ns solves the problem only partial as socket to be stoped until proper stop is a valid netlink kernel socket and can be looked up by the user processes. This is not a problem until it resides in initial namespace (no processes inside this net), but this is not true for init_net. So, hold the referrence for a socket, remove it from lookup tables and only after that change namespace and perform a last put. Signed-off-by:
Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by:
-
Denis V. Lunev authored
Create a specific helper for netlink kernel socket disposal. This just let the code look better and provides a ground for proper disposal inside a namespace. Signed-off-by:
-
Denis V. Lunev authored
Network namespace allocates 2 kernel netlink sockets, fibnl & rtnl. These sockets should be disposed properly, i.e. by sock_release. Plain sock_put is not enough. Signed-off-by:
-
Denis V. Lunev authored
Netlink protocol table is global for all namespaces. Some netlink protocols have been virtualized, i.e. they have per/namespace netlink socket. This difference can easily lead to double free if more than 1 namespace is started. Count the number of kernel netlink sockets to track that this table is not used any more. Signed-off-by:
-
Daniel Lezcano authored
Alexey Dobriyan reported an oops when unsharing the network indefinitely inside a loop. This is because the ip6_frag is not per namespace while the ctls are. That happens at the fragment timer expiration: inet_frag_secret_rebuild function is called and this one restarts the timer using the value stored inside the sysctl field. "mod_timer(&f->secret_timer, now + f->ctl->secret_interval);" When the network is unshared, ip6_frag.ctl is initialized with the new sysctl instances, but ip6_frag has only one instance. A race in this case will appear because f->ctl can be modified during the read access in the timer callback. Until the ip6_frag is not per namespace, I discard the assignation to the ctl field of ip6_frags in ip6_frag_sysctl_init when the network namespace is not the init net. Signed-off-by: -
Stefan Roese authored
Currently, all non TAH equipped 4xx PPC's call emac_start_xmit() upon xmit. This routine doesn't check if the frame length exceeds the max. MAL buffer size. This patch now changes the driver to call emac_start_xmit_sg() on all GigE platforms and not only the TAH equipped ones (440GX). This enables an MTU of 9000 instead 4080. Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Claudio Lanconelli authored
Signed-off-by:
Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by:
-
Thomas Bogendoerfer authored
When doing init_ring checking whether a new skb needs to be allocated was wrong. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Stephen Hemminger authored
Update driver version reflects new hardware support. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Stephen Hemminger authored
Add support from sk98lin vendor driver 10.50.1.3 for 88E8055 and 88E8075 chips. I don't have this hardware to test, so this changes are untested. Signed-off-by:
-
Al Viro authored
stop the byteswap-in-place, annotate Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
David Miller authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Thomas Bogendoerfer authored
- Use inline functions for dma_sync_* instead of macros - added Kconfig change to make selection for similair SGI boxes easier Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Florian Fainelli authored
This patch adds me as maintainer of the RDC R6040 Fast Ethernet driver. Signed-off-by:
Florian Fainelli <florian.fainelli@telecomint.eu> -- Signed-off-by:
-
Zhu Yi authored
This patch skips mac80211 configuration setting during a hardware scan and replays it afterwards for the iwlwifi drivers. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Zhu Yi authored
This patch changes the iwlwifi driver to properly support monitor interfaces after the filter flags change. The patch is originally created by Johannes Berg for iwl4965. I fixed some of the comments and created a similar patch for iwl3945. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
-
David Woodhouse authored
sizeof(*cmd) is going to give the total size of the data structure that we allocated, more often than not. But the size of the command to be _sent_ could be a lot smaller, as it is in the KEY_MATERIAL and SUBSCRIBE_EVENT commands for example. So swap them round; let the caller set the _command_ size explicitly in the header, and infer the maximum response size from the data structure. Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
-
David Woodhouse authored
We don't necessarily want to reset the device on a TX timeout. But more often than not, the real cause is that the firmware has crapped itself, not just that the network is busy. So submit any harmless command, and if _that_ times out, then the error handling code will reset the module, as appropriate. Signed-off-by:
-
David Woodhouse authored
Even if it fails, we want to wait a while and try again, with an ultimate timeout if it the condition persists. So again, just use the standard command timeout behaviour. Signed-off-by:
-
