Get rid of this warning:

  CC      arch/s390/kvm/../../../virt/kvm/kvm_main.o
arch/s390/kvm/../../../virt/kvm/kvm_main.c:596:12: warning: 'kvm_create_dirty_bitmap' defined but not used

The only caller of the function is within a !CONFIG_S390 section, so add the
same ifdef around kvm_create_dirty_bitmap() as well.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

This case is a pure user space error we do not need to record. Moreover,
it can be misused to flood the kernel log. Remove it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Fix:

[ 1001.499596] ===================================================
[ 1001.499599] [ INFO: suspicious rcu_dereference_check() usage. ]
[ 1001.499601] ---------------------------------------------------
[ 1001.499604] include/linux/kvm_host.h:301 invoked rcu_dereference_check() without protection!
	......
[ 1001.499636] Pid: 6035, comm: qemu-system-x86 Not tainted 2.6.37-rc6+ #62
[ 1001.499638] Call Trace:
[ 1001.499644]  [] lockdep_rcu_dereference+0x9d/0xa5
[ 1001.499653]  [] gfn_to_memslot+0x8d/0xc8 [kvm]
[ 1001.499661]  [] gfn_to_hva+0x16/0x3f [kvm]
[ 1001.499669]  [] kvm_read_guest_page+0x1e/0x5e [kvm]
[ 1001.499681]  [] kvm_read_guest_page_mmu+0x53/0x5e [kvm]
[ 1001.499699]  [] load_pdptrs+0x3f/0x9c [kvm]
[ 1001.499705]  [] ? vmx_set_cr0+0x507/0x517 [kvm_intel]
[ 1001.499717]  [] kvm_arch_vcpu_ioctl_set_sregs+0x1f3/0x3c0 [kvm]
[ 1001.499727]  [] kvm_vcpu_ioctl+0x6a5/0xbc5 [kvm]
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Instead of exchanging the guest and host rcx, have separate storage
for each.  This allows us to avoid using the xchg instruction, which
is is a little slower than normal operations.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Change

  push top-of-stack
  pop guest-rcx
  pop dummy

to

  pop guest-rcx

which is the same thing, only simpler.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

On some CPUs, a ple_gap of 41 is simply insufficient to ever trigger
PLE exits, even with the minimalistic PLE test from kvm-unit-tests.

http://git.kernel.org/?p=virt/kvm/kvm-unit-tests.git;a=commitdiff;h=eda71b28fa122203e316483b35f37aaacd42f545

For example, the Xeon X5670 CPU needs a ple_gap of at least 48 in
order to get pause loop exits:

# modprobe kvm_intel ple_gap=47
# taskset 1 /usr/local/bin/qemu-system-x86_64 \
  -device testdev,chardev=log -chardev stdio,id=log \
  -kernel x86/vmexit.flat -append ple-round-robin -smp 2
VNC server running on `::1:5900'
enabling apic
enabling apic
ple-round-robin 58298446
# rmmod kvm_intel
# modprobe kvm_intel ple_gap=48
# taskset 1 /usr/local/bin/qemu-system-x86_64 \
   -device testdev,chardev=log -chardev stdio,id=log \
   -kernel x86/vmexit.flat -append ple-round-robin -smp 2
VNC server running on `::1:5900'
enabling apic
enabling apic
ple-round-robin 36616

Increase the ple_gap to 128 to be on the safe side.
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Zhai, Edwin <edwin.zhai@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

This patch adds the necessary code to run perf-kvm on AMD
machines.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

When emulating real mode, we fake some state:

 - tr.base points to a fake vm86 tss
 - segment registers are made to conform to vm86 restrictions

change vmx_get_segment() not to expose this fake state to userspace;
instead, return the original state.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

When emulating real mode we play with tr hidden state, but leave
tr.selector alone.  That works well, except for save/restore, since
loading TR writes it to the hidden state in vmx->rmode.

Fix by also saving and restoring the tr selector; this makes things
more consistent and allows migration to work during the early
boot stages of Windows XP.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Previously SPRGs 4-7 were improperly read and written in
kvm_arch_vcpu_ioctl_get_regs() and kvm_arch_vcpu_ioctl_set_regs();
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

WARNING: arch/x86/built-in.o(.text+0x1bb74): Section mismatch in reference from the function kvm_guest_cpu_online() to the function .cpuinit.text:kvm_guest_cpu_init()
The function kvm_guest_cpu_online() references
the function __cpuinit kvm_guest_cpu_init().
This is often because kvm_guest_cpu_online lacks a __cpuinit
annotation or the annotation of kvm_guest_cpu_init is wrong.

This patch fixes the warning.

Tested with linux-next (next-20101231)
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Instead, drop large mappings, which were the reason we dropped shadow.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

* 'mnt_devname' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  vfs: bury ->get_sb()
  nfs: switch NFS from ->get_sb() to ->mount()
  nfs: stop mangling ->mnt_devname on NFS
  vfs: new superblock methods to override /proc/*/mount{s,info}
  nfs: nfs_do_{ref,sub}mount() superblock argument is redundant
  nfs: make nfs_path() work without vfsmount
  nfs: store devname at disconnected NFS roots
  nfs: propagate devname to nfs{,4}_get_root()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/block: amiflop - Remove superfluous amiga_chip_alloc() cast
  m68k/atari: ARAnyM - Add support for network access
  m68k/atari: ARAnyM - Add support for console access
  m68k/atari: ARAnyM - Add support for block access
  m68k/atari: Initial ARAnyM support
  m68k: Kconfig - Remove unneeded "default n"
  m68k: Makefiles - Change to new flags variables
  m68k/amiga: Reclaim Chip RAM for PPC exception handlers
  m68k: Allow all kernel traps to be handled via exception fixups
  m68k: Use base_trap_init() to initialize vectors
  m68k: Add helper function handle_kernel_fault()

* 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6629/2: aaec2000: remove support for mach-aaec2000
  ARM: lh7a40x: remove unmaintained platform support

Fix up trivial conflicts in
 - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed)
 - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (91 commits)
  ARM: 6806/1: irq: introduce entry and exit functions for chained handlers
  ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas
  ARM: 6747/1: P2V: Thumb2 support
  ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump
  ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode
  ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9
  ARM: 6772/1: errata: possible fault MMU translations following an ASID switch
  ARM: 6776/1: mach-ux500: activate fix for errata 753970
  ARM: 6794/1: SPEAr: Append UL to device address macros.
  ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files
  ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros
  ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code
  ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry
  ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci
  ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h
  ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files.
  ARM: 6681/1: SPEAr: add debugfs support to clk API
  ARM: 6703/1: SPEAr: update clk API support
  ARM: 6679/1: SPEAr: make clk API functions more generic
  ARM: 6737/1: SPEAr: formalized timer support
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (41 commits)
  m68knommu: external interrupt support to ColdFire intc-simr controller
  m68knommu: external interrupt support to ColdFire intc-2 controller
  m68knommu: remove ColdFire CLOCK_DIV config option
  m68knommu: fix gpio warnings for ColdFire 5407 targets
  m68knommu: fix gpio warnings for ColdFire 532x targets
  m68knommu: fix gpio warnings for ColdFire 5307 targets
  m68knommu: fix gpio warnings for ColdFire 527x targets
  m68knommu: fix gpio warnings for ColdFire 5272 targets
  m68knommu: fix gpio warnings for ColdFire 5249 targets
  m68knommu: fix gpio warnings for ColdFire 523x targets
  m68knommu: fix gpio warnings for ColdFire 520x targets
  m68knommu: fix gpio warnings for ColdFire 5206e targets
  m68knommu: fix gpio warnings for ColdFire 5206 targets
  m68knommu: fixing compiler warnings
  m68knommu: limit interrupts supported by ColdFire intc-simr driver
  m68knommu: move some init code out of unmask routine for ColdFire intc-2
  m68knommu: limit interrupts supported by ColdFire intc-2 driver
  m68knommu: add basic support for the ColdFire based FireBee board
  m68knommu: make ColdFire internal peripheral region configurable
  m68knommu: clean up definitions of ColdFire peripheral base registers
  ...

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] tioca: Fix assignment from incompatible pointer warnings
  [IA64] mca.c: Fix cast from integer to pointer warning
  [IA64] setup.c Typo fix "Architechtuallly"
  [IA64] Add CONFIG_MISC_DEVICES=y to configs that need it.
  [IA64] disable interrupts at end of ia64_mca_cpe_int_handler()
  [IA64] Add DMA_ERROR_CODE define.
  pstore: fix build warning for unused return value from sysfs_create_file
  pstore: X86 platform interface using ACPI/APEI/ERST
  pstore: new filesystem interface to platform persistent storage

* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits)
  tty: serial: altera_jtaguart: Add device tree support
  tty: serial: altera_uart: Add devicetree support
  dt: eliminate of_platform_driver shim code
  dt: Eliminate of_platform_{,un}register_driver
  dt/serial: Eliminate users of of_platform_{,un}register_driver
  dt/usb: Eliminate users of of_platform_{,un}register_driver
  dt/video: Eliminate users of of_platform_{,un}register_driver
  dt/net: Eliminate users of of_platform_{,un}register_driver
  dt/sound: Eliminate users of of_platform_{,un}register_driver
  dt/spi: Eliminate users of of_platform_{,un}register_driver
  dt: uartlite: merge platform and of_platform driver bindings
  dt: xilinx_hwicap: merge platform and of_platform driver bindings
  ipmi: convert OF driver to platform driver
  leds/leds-gpio: merge platform_driver with of_platform_driver
  dt/sparc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: move of_bus_type infrastructure to ibmebus
  drivercore/dt: add a match table pointer to struct device
  dt: Typo fix.
  altera_ps2: Add devicetree support
  ...

* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  BKL: That's all, folks
  fs/locks.c: Remove stale FIXME left over from BKL conversion
  ipx: remove the BKL
  appletalk: remove the BKL
  x25: remove the BKL
  ufs: remove the BKL
  hpfs: remove the BKL
  drivers: remove extraneous includes of smp_lock.h
  tracing: don't trace the BKL
  adfs: remove the big kernel lock

Conflicts:
	arch/arm/kernel/module.c
	arch/arm/mach-s5pv210/sleep.S

Conflicts:
	arch/arm/include/asm/cacheflush.h
	arch/arm/include/asm/proc-fns.h
	arch/arm/mm/Kconfig

Conflicts:
	arch/arm/Kconfig

Merge branches 'at91', 'ep93xx', 'errata', 'footbridge', 'fncpy', 'gemini', 'irqdata', 'pm', 'sh', 'smp', 'spear', 'ux500' and 'via' into devel

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
  bonding: enable netpoll without checking link status
  xfrm: Refcount destination entry on xfrm_lookup
  net: introduce rx_handler results and logic around that
  bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
  bonding: wrap slave state work
  net: get rid of multiple bond-related netdevice->priv_flags
  bonding: register slave pointer for rx_handler
  be2net: Bump up the version number
  be2net: Copyright notice change. Update to Emulex instead of ServerEngines
  e1000e: fix kconfig for crc32 dependency
  netfilter ebtables: fix xt_AUDIT to work with ebtables
  xen network backend driver
  bonding: Improve syslog message at device creation time
  bonding: Call netif_carrier_off after register_netdevice
  bonding: Incorrect TX queue offset
  net_sched: fix ip_tos2prio
  xfrm: fix __xfrm_route_forward()
  be2net: Fix UDP packet detected status in RX compl
  Phonet: fix aligned-mode pipe socket buffer header reserve
  netxen: support for GbE port settings
  ...

Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (961 commits)
  staging: hv: fix memory leaks
  staging: hv: Remove NULL check before kfree
  Staging: hv: Get rid of vmbus_child_dev_add()
  Staging: hv: Change the signature for vmbus_child_device_register()
  Staging: hv: Get rid of vmbus_cleanup() function
  Staging: hv: Get rid of vmbus_dev_rm() function
  Staging: hv: Change the signature for vmbus_on_isr()
  Staging: hv: Eliminate vmbus_event_dpc()
  Staging: hv: Get rid of the function vmbus_msg_dpc()
  Staging: hv: Change the signature for vmbus_cleanup()
  Staging: hv: Simplify root device management
  staging: rtl8192e: Don't copy dev pointer to skb
  staging: rtl8192e: Pass priv to cmdpkt functions
  staging: rtl8192e: Pass priv to firmware download functions
  staging: rtl8192e: Pass priv to rtl8192_interrupt
  staging: rtl8192e: Pass rtl8192_priv to dm functions
  staging: rtl8192e: Pass ieee80211_device to callbacks
  staging: rtl8192e: Pass ieee80211_device to callbacks
  staging: rtl8192e: Pass ieee80211_device to callbacks
  staging: rtl8192e: Pass ieee80211_device to callbacks
  ...

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
  pch_uart: reference clock on CM-iTC
  pch_phub: add new device ML7213
  n_gsm: fix UIH control byte : P bit should be 0
  n_gsm: add a documentation
  serial: msm_serial_hs: Add MSM high speed UART driver
  tty_audit: fix tty_audit_add_data live lock on audit disabled
  tty: move cd1865.h to drivers/staging/tty/
  Staging: tty: fix build with epca.c driver
  pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
  Staging: generic_serial: fix double locking bug
  nozomi: don't use flush_scheduled_work()
  tty/serial: Relax the device_type restriction from of_serial
  MAINTAINERS: Update HVC file patterns
  tty: phase out of ioctl file pointer for tty3270 as well
  tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
  pch_uart: Fix DMA channel miss-setting issue.
  pch_uart: fix exclusive access issue
  pch_uart: fix auto flow control miss-setting issue
  pch_uart: fix uart clock setting issue
  pch_uart : Use dev_xxx not pr_xxx
  ...

Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)

Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6

* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (50 commits)
  printk: do not mangle valid userspace syslog prefixes
  efivars: Add Documentation
  efivars: Expose efivars functionality to external drivers.
  efivars: Parameterize operations.
  efivars: Split out variable registration
  efivars: parameterize efivars
  efivars: Make efivars bin_attributes dynamic
  efivars: move efivars globals into struct efivars
  drivers:misc: ti-st: fix debugging code
  kref: Fix typo in kref documentation
  UIO: add PRUSS UIO driver support
  Fix spelling mistakes in Documentation/zh_CN/SubmittingPatches
  firmware: Fix unaligned memory accesses in dmi-sysfs
  firmware: Add documentation for /sys/firmware/dmi
  firmware: Expose DMI type 15 System Event Log
  firmware: Break out system_event_log in dmi-sysfs
  firmware: Basic dmi-sysfs support
  firmware: Add DMI entry types to the headers
  Driver core: convert platform_{get,set}_drvdata to static inline functions
  Translate linux-2.6/Documentation/magic-number.txt into Chinese
  ...

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
  USB: Add support for SuperSpeed isoc endpoints
  xhci: Clean up cycle bit math used during stalls.
  xhci: Fix cycle bit calculation during stall handling.
  xhci: Update internal dequeue pointers after stalls.
  USB: Disable auto-suspend for USB 3.0 hubs.
  USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
  xhci: Return canceled URBs immediately when host is halted.
  xhci: Fixes for suspend/resume of shared HCDs.
  xhci: Fix re-init on power loss after resume.
  xhci: Make roothub functions deal with device removal.
  xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
  xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
  xhci: Register second xHCI roothub.
  xhci: Change xhci_find_slot_id_by_port() API.
  xhci: Refactor bus suspend state into a struct.
  xhci: Index with a port array instead of PORTSC addresses.
  USB: Set usb_hcd->state and flags for shared roothubs.
  usb: Make core allocate resources per PCI-device.
  usb: Store bus type in usb_hcd, not in driver flags.
  usb: Change usb_hcd->bandwidth_mutex to a pointer.
  ...

This is an ex-parrot.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The last remaining instances of ->get_sb() can be converted ->mount()
now - nothing in them uses new vfsmount anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

now we can do that - nobody cares about its value anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

a) ->show_devname(m, mnt) - what to put into devname columns in mounts,
mountinfo and mountstats
b) ->show_path(m, mnt) - what to put into relative path column in mountinfo

Leaving those NULL gives old behaviour.  NFS switched to using those.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

It's always equal to dentry->d_sb
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

part 3: now we have everything to get nfs_path() just by dentry -
just follow to (disconnected) root and pick the rest of the thing
there.

Start killing propagation of struct vfsmount * on the paths that
used to bring it to nfs_path().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

part 2: make sure that disconnected roots have corresponding mnt_devname
values stashed into them.

Have nfs*_get_root() stuff a copy of devname into ->d_fsdata of the
found root, provided that it is disconnected.

Have ->d_release() free it when dentry goes away.

Have the places where NFS uses ->d_fsdata for sillyrename (and that
can *never* happen to a disconnected root - dentry will be attached
to its parent) free old devname copies if they find those.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

step 1 of ->mnt_devname fixes: make sure we have the value of devname
available in ..._get_root().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  fix cdev leak on O_PATH final fput()

__fput doesn't need a cdev_put() for O_PATH handles.

Signed-off-by: mszeredi@suse.cz
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Only slaves that are up should transmit netpoll frames, so there is no
need to check to see if a slave is up before enabling netpoll on it.
This resolves a reported failure on active-backup bonds where a slave
interface is down when netpoll was enabled.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Tested-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>