commit c5781ffb upstream.

ACPICA commit b233720031a480abd438f2e9c643080929d144c3

ASL operation_regions declare a range of addresses that it uses. In a
perfect world, the range of addresses should be used exclusively by
the AML interpreter. The OS can use this information to decide which
drivers to load so that the AML interpreter and device drivers use
different regions of memory.

During table load, the address information is added to a global
address range list. Each node in this list contains an address range
as well as a namespace node of the operation_region. This list is
deleted at ACPI shutdown.

Unfortunately, ASL operation_regions can be declared inside of control
methods. Although this is not recommended, modern firmware contains
such code. New module level code changes unintentionally removed the
functionality of adding and removing nodes to the global address
range list.

A few months ago, support for adding addresses has been re-
implemented. However, the removal of the address range list was
missed and resulted in some systems to crash due to the address list
containing bogus namespace nodes from operation_regions declared in
control methods. In order to fix the crash, this change removes
dynamic operation_regions after control method termination.

Link: https://github.com/acpica/acpica/commit/b2337200
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475
Fixes: 4abb951b ("ACPICA: AML interpreter: add region addresses in global list during initialization")
Reported-by: Michael J Gruber <mjg@fedoraproject.org>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c8b1917c upstream.

Commit 18996f2d ("ACPICA: Events: Stop unconditionally clearing
ACPI IRQs during suspend/resume") was added to stop clearing event
status bits unconditionally in the system-wide suspend and resume
paths. This was done because of an issue with a laptop lid appaering
to be closed even when it was used to wake up the system from suspend
(see https://bugzilla.kernel.org/show_bug.cgi?id=196249), which
happened because event status bits were cleared unconditionally on
system resume. Though this change fixed the issue in the resume path,
it introduced regressions in a few suspend paths.

First regression was reported and fixed in the S5 entry path by commit
fa85015c ("ACPICA: Clear status of all events when entering S5").
Next regression was reported and fixed for all legacy sleep paths by
commit f317c7dc ("ACPICA: Clear status of all events when entering
sleep states").  However, there still is a suspend-to-idle regression,
since suspend-to-idle does not follow the legacy sleep paths.

In the suspend-to-idle case, wakeup is enabled as part of device
suspend.  If the status bits of wakeup GPEs are set when they are
enabled, it causes a premature system wakeup to occur.

To address that problem, partially revert commit 18996f2d to
restore GPE status bits clearing before the GPE is enabled in
acpi_ev_enable_gpe().

Fixes: 18996f2d ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Signed-off-by: Furquan Shaikh <furquan@google.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a165dcc9 upstream.

Select REGMAP_I2C to avoid below build error:
ERROR: "__devm_regmap_init_i2c" [drivers/hwmon/w83773g.ko] undefined!

Fixes: ee249f27 ("hwmon: Add W83773G driver")
Cc: stable@vger.kernel.org
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7c0cca7c upstream.

By default, the kernel will automatically load the module of any line
dicipline that is asked for.  As this sometimes isn't the safest thing
to do, provide a sysctl to disable this feature.

By default, we set this to 'y' as that is the historical way that Linux
has worked, and we do not want to break working systems.  But in the
future, perhaps this can default to 'n' to prevent this functionality.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c7084edc upstream.

The n_r3964 line discipline driver was written in a different time, when
SMP machines were rare, and users were trusted to do the right thing.
Since then, the world has moved on but not this code, it has stayed
rooted in the past with its lovely hand-crafted list structures and
loads of "interesting" race conditions all over the place.

After attempting to clean up most of the issues, I just gave up and am
now marking the driver as BROKEN so that hopefully someone who has this
hardware will show up out of the woodwork (I know you are out there!)
and will help with debugging a raft of changes that I had laying around
for the code, but was too afraid to commit as odds are they would break
things.

Many thanks to Jann and Linus for pointing out the initial problems in
this codebase, as well as many reviews of my attempts to fix the issues.
It was a case of whack-a-mole, and as you can see, the mole won.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit c8a43c18 ]

When KASLR is enabled (CONFIG_RANDOMIZE_BASE=y), the top 4K of kernel
virtual address space may be mapped to physical addresses despite being
reserved for ERR_PTR values.

Fix the randomization of the linear region so that we avoid mapping the
last page of the virtual address space.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: liyueyi <liyueyi@live.com>
[will: rewrote commit message; merged in suggestion from Ard]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

commit 89259088 upstream

syzbot was able to trigger the WARN in cttimeout_default_get() by
passing UDPLITE as l4protocol.  Alias UDPLITE to UDP, both use
same timeout values.

Furthermore, also fetch GRE timeouts.  GRE is a bit more complicated,
as it still can be a module and its netns_proto_gre struct layout isn't
visible outside of the gre module. Can't move timeouts around, it
appears conntrack sysctl unregister assumes net_generic() returns
nf_proto_net, so we get crash. Expose layout of netns_proto_gre instead.

A followup nf-next patch could make gre tracker be built-in as well
if needed, its not that large.

Last, make the WARN() mention the missing protocol value in case
anything else is missing.

Reported-by: syzbot+2fae8fa157dd92618cae@syzkaller.appspotmail.com
Fixes: 8866df92 ("netfilter: nfnetlink_cttimeout: pass default timeout policy to obj_to_nlattr")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

commit 8866df92 upstream

Otherwise, we hit a NULL pointer deference since handlers always assume
default timeout policy is passed.

  netlink: 24 bytes leftover after parsing attributes in process `syz-executor2'.
  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] PREEMPT SMP KASAN
  CPU: 0 PID: 9575 Comm: syz-executor1 Not tainted 4.19.0+ #312
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:icmp_timeout_obj_to_nlattr+0x77/0x170 net/netfilter/nf_conntrack_proto_icmp.c:297

Fixes: c779e849 ("netfilter: conntrack: remove get_timeout() indirection")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

This reverts commit c8e4f840.

This patch was not initially a fix and is dependent on other
changes which are not fixes eithers.

With this change, multiple Amlogic based boards fails to boot,
as reported by kernelci.

Cc: stable@vger.kernel.org # 4.19.34
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5f074f3e ]

A recent optimization in Clang (r355672) lowers comparisons of the
return value of memcmp against zero to comparisons of the return value
of bcmp against zero.  This helps some platforms that implement bcmp
more efficiently than memcmp.  glibc simply aliases bcmp to memcmp, but
an optimized implementation is in the works.

This results in linkage failures for all targets with Clang due to the
undefined symbol.  For now, just implement bcmp as a tailcail to memcmp
to unbreak the build.  This routine can be further optimized in the
future.

Other ideas discussed:

 * A weak alias was discussed, but breaks for architectures that define
   their own implementations of memcmp since aliases to declarations are
   not permitted (only definitions). Arch-specific memcmp
   implementations typically declare memcmp in C headers, but implement
   them in assembly.

 * -ffreestanding also is used sporadically throughout the kernel.

 * -fno-builtin-bcmp doesn't work when doing LTO.

Link: https://bugs.llvm.org/show_bug.cgi?id=41035
Link: https://code.woboq.org/userspace/glibc/string/memcmp.c.html#bcmp
Link: https://github.com/llvm/llvm-project/commit/8e16d73346f8091461319a7dfc4ddd18eedcff13
Link: https://github.com/ClangBuiltLinux/linux/issues/416
Link: http://lkml.kernel.org/r/20190313211335.165605-1-ndesaulniers@google.comSigned-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: James Y Knight <jyknight@google.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit ac3e233d upstream.

GNU linker's -z common-page-size's default value is based on the target
architecture. arch/x86/entry/vdso/Makefile sets it to the architecture
default, which is implicit and redundant. Drop it.

Fixes: 2aae950b ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu")
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Bill Wendling <morbo@google.com>
Suggested-by: Dmitry Golovin <dima@golovin.in>
Suggested-by: Rui Ueyama <ruiu@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Fangrui Song <maskray@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com
Link: https://bugs.llvm.org/show_bug.cgi?id=38774
Link: https://github.com/ClangBuiltLinux/linux/issues/31Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit ad15006c upstream.

This causes an issue when trying to build with `make LD=ld.lld` if
ld.lld and the rest of your cross tools aren't in the same directory
(ex. /usr/local/bin) (as is the case for Android's build system), as the
GCC_TOOLCHAIN_DIR then gets set based on `which $(LD)` which will point
where LLVM tools are, not GCC/binutils tools are located.

Instead, select the GCC_TOOLCHAIN_DIR based on another tool provided by
binutils for which LLVM does not provide a substitute for, such as
elfedit.

Fixes: 785f11aa ("kbuild: Add better clang cross build support")
Link: https://github.com/ClangBuiltLinux/linux/issues/341Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 02826a6b ]

Ard Biesheuvel reports bindeb-pkg with O= option is broken in the
following way:

  ...
    LD [M]  sound/soc/rockchip/snd-soc-rk3399-gru-sound.ko
    LD [M]  sound/soc/rockchip/snd-soc-rockchip-pcm.ko
    LD [M]  sound/soc/rockchip/snd-soc-rockchip-rt5645.ko
    LD [M]  sound/soc/rockchip/snd-soc-rockchip-spdif.ko
    LD [M]  sound/soc/sh/rcar/snd-soc-rcar.ko
   fakeroot -u debian/rules binary
  make KERNELRELEASE=4.19.0-12677-g19beffaf7a99-dirty ARCH=arm64 KBUILD_SRC= intdeb-pkg
  /bin/bash /home/ard/linux/scripts/package/builddeb
  Makefile:600: include/config/auto.conf: No such file or directory
  ***
  *** Configuration file ".config" not found!
  ***
  *** Please run some configurator (e.g. "make oldconfig" or
  *** "make menuconfig" or "make xconfig").
  ***
  make[12]: *** [syncconfig] Error 1
  make[11]: *** [syncconfig] Error 2
  make[10]: *** [include/config/auto.conf] Error 2
  make[9]: *** [__sub-make] Error 2
  ...

Prior to commit 80463f1b ("kbuild: add --include-dir flag only
for out-of-tree build"), both srctree and objtree were added to
--include-dir redundantly, and the wrong code '$MAKE image_name'
was working by relying on that. Now, the potential issue that had
previously been hidden just showed up.

'$MAKE image_name' recurses to the generated $(objtree)/Makefile and
ends up with running in srctree, which is incorrect. It should be
invoked with '-f $srctree/Makefile' (or KBUILD_SRC=) to be executed
in objtree.

Fixes: 80463f1b ("kbuild: add --include-dir flag only for out-of-tree build")
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e28408e9 ]

Set xon = xoff - netdev's max_mtu.
netdev's max_mtu will give enough time for the pause frame to
arrive at the sender.

Fixes: 0696d608 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5ec983e9 ]

Set minimum speed in xoff threshold formula to 40Gbps

Fixes: 0696d608 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8e949363 ]

idr_find() can return a NULL value to 'flow' which is used without a
check. The patch adds a check to avoid potential NULL pointer dereference.

In case of mlx5_fpga_sbu_conn_sendmsg() failure, free buf allocated
using kzalloc.

Fixes: ab412e1d ("net/mlx5: Accel, add TLS rx offload routines")
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 288ac524 ]

It was reported that re-introducing ASPM, in combination with RX
interrupt coalescing, results in significantly increased packet
latency, see [0]. Disabling ASPM or RX interrupt coalescing fixes
the issue. Therefore change the driver's default to disable RX
interrupt coalescing. Users still have the option to enable RX
coalescing via ethtool.

[0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=925496

Fixes: a99790bf ("r8169: Reinstate ASPM Support")
Reported-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9a5a90d1 ]

__netif_receive_skb_list_ptype() leaves skb->next poisoned before passing
it to pt_prev->func handler, what may produce (in certain cases, e.g. DSA
setup) crashes like:

[ 88.606777] CPU 0 Unable to handle kernel paging request at virtual address 0000000e, epc == 80687078, ra == 8052cc7c
[ 88.618666] Oops[#1]:
[ 88.621196] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc2-dlink-00206-g4192a172-dirty #1473
[ 88.630885] $ 0 : 00000000 10000400 00000002 864d7850
[ 88.636709] $ 4 : 87c0ddf0 864d7800 87c0ddf0 00000000
[ 88.642526] $ 8 : 00000000 49600000 00000001 00000001
[ 88.648342] $12 : 00000000 c288617b dadbee27 25d17c41
[ 88.654159] $16 : 87c0ddf0 85cff080 80790000 fffffffd
[ 88.659975] $20 : 80797b20 ffffffff 00000001 864d7800
[ 88.665793] $24 : 00000000 8011e658
[ 88.671609] $28 : 80790000 87c0dbc0 87cabf00 8052cc7c
[ 88.677427] Hi : 00000003
[ 88.680622] Lo : 7b5b4220
[ 88.683840] epc : 80687078 vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.690532] ra : 8052cc7c dev_hard_start_xmit+0xac/0x188
[ 88.696734] Status: 10000404	IEp
[ 88.700422] Cause : 50000008 (ExcCode 02)
[ 88.704874] BadVA : 0000000e
[ 88.708069] PrId : 0001a120 (MIPS interAptiv (multi))
[ 88.713005] Modules linked in:
[ 88.716407] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000)
[ 88.725219] Stack : 85f61c28 00000000 0000000e 80780000 87c0ddf0 85cff080 80790000 8052cc7c
[ 88.734529] 87cabf00 00000000 00000001 85f5fb40 807b0000 864d7850 87cabf00 807d0000
[ 88.743839] 864d7800 8655f600 00000000 85cff080 87c1c000 0000006a 00000000 8052d96c
[ 88.753149] 807a0000 8057adb8 87c0dcc8 87c0dc50 85cfff08 00000558 87cabf00 85f58c50
[ 88.762460] 00000002 85f58c00 864d7800 80543308 fffffff4 00000001 85f58c00 864d7800
[ 88.771770] ...
[ 88.774483] Call Trace:
[ 88.777199] [<80687078>] vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.783504] [<8052cc7c>] dev_hard_start_xmit+0xac/0x188
[ 88.789326] [<8052d96c>] __dev_queue_xmit+0x6e8/0x7d4
[ 88.794955] [<805a8640>] ip_finish_output2+0x238/0x4d0
[ 88.800677] [<805ab6a0>] ip_output+0xc8/0x140
[ 88.805526] [<805a68f4>] ip_forward+0x364/0x560
[ 88.810567] [<805a4ff8>] ip_rcv+0x48/0xe4
[ 88.815030] [<80528d44>] __netif_receive_skb_one_core+0x44/0x58
[ 88.821635] [<8067f220>] dsa_switch_rcv+0x108/0x1ac
[ 88.827067] [<80528f80>] __netif_receive_skb_list_core+0x228/0x26c
[ 88.833951] [<8052ed84>] netif_receive_skb_list+0x1d4/0x394
[ 88.840160] [<80355a88>] lunar_rx_poll+0x38c/0x828
[ 88.845496] [<8052fa78>] net_rx_action+0x14c/0x3cc
[ 88.850835] [<806ad300>] __do_softirq+0x178/0x338
[ 88.856077] [<8012a2d4>] irq_exit+0xbc/0x100
[ 88.860846] [<802f8b70>] plat_irq_dispatch+0xc0/0x144
[ 88.866477] [<80105974>] handle_int+0x14c/0x158
[ 88.871516] [<806acfb0>] r4k_wait+0x30/0x40
[ 88.876462] Code: afb10014 8c8200a0 00803025 <9443000c> 94a20468 00000000 10620042 00a08025 9605046a
[ 88.887332]
[ 88.888982] ---[ end trace eb863d007da11cf1 ]---
[ 88.894122] Kernel panic - not syncing: Fatal exception in interrupt
[ 88.901202] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fix this by pulling skb off the sublist and zeroing skb->next pointer
before calling ptype callback.

Fixes: 88eb1944 ("net: core: propagate SKB lists through packet_type lookup")
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2a3cabae ]

erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove
erspan header. This can determine a possible use-after-free accessing
pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header

Fixes: 1d7e2ed2 ("net: erspan: refactor existing erspan code")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 492b67e2 ]

erspan tunnels run __iptunnel_pull_header on received skbs to remove
gre and erspan headers. This can determine a possible use-after-free
accessing pkt_md pointer in erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header

Fixes: 1d7e2ed2 ("net: erspan: refactor existing erspan code")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8e44e96c ]

If the RX completion indicates RX buffers errors, the RX ring will be
disabled by firmware and no packets will be received on that ring from
that point on.  Recover by resetting the device.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a1b0e4e6 ]

There is logic to check that the RX/TPA consumer index is the expected
index to work around a hardware problem.  However, the potentially bad
consumer index is first used to index into an array to reference an entry.
This can potentially crash if the bad consumer index is beyond legal
range.  Improve the logic to use the consumer index for dereferencing
after the validity check and log an error message.

Fixes: fa7e2812 ("bnxt_en: Add workaround to detect bad opaque in rx completion (part 2)")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c3e1f7ff ]

NFP reprs are software device on top of the PF's vNIC.
The comment above __dev_queue_xmit() sayeth:

 When calling this method, interrupts MUST be enabled.  This is because
 the BH enable code must have IRQs enabled so that it will not deadlock.

For netconsole we can't guarantee IRQ state, let's just
disable netpoll on representors to be on the safe side.

When the initial implementation of NFP reprs was added by the
commit 5de73ee4 ("nfp: general representor implementation")
.ndo_poll_controller was required for netpoll to be enabled.

Fixes: ac3d9dd0 ("netpoll: make ndo_poll_controller() optional")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c8ba5b91 ]

dev_queue_xmit() may return error codes as well as netdev_tx_t,
and it always consumes the skb.  Make sure we always return a
correct netdev_tx_t value.

Fixes: eadfa4c3 ("nfp: add stats and xmit helpers for representors")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 80a2a902 ]

Refresh tirs is looping over a global list of tirs while netdevs are
adding and removing tirs from that list. That is why a lock is
required.

Fixes: 724b2aa1 ("net/mlx5e: TIRs management refactoring")
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bc87a003 ]

Previously, a false positive would be caught if the TIRs list is
empty, since the err value was initialized to -ENOMEM, and was only
updated if a TIR is refreshed. This is resolved by initializing the
err value to zero.

Fixes: b676f653 ("net/mlx5e: Refactor refresh TIRs")
Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8c83f2df ]

Configuration check to accept source route IP options should be made on
the incoming netdevice when the skb->dev is an l3mdev master. The route
lookup for the source route next hop also needs the incoming netdev.

v2->v3:
- Simplify by passing the original netdevice down the stack (per David
  Ahern).
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b506bc97 ]

 When tcp_sk_init() failed in inet_ctl_sock_create(),
 'net->ipv4.tcp_congestion_control' will be left
 uninitialized, but tcp_sk_exit() hasn't check for
 that.

 This patch add checking on 'net->ipv4.tcp_congestion_control'
 in tcp_sk_exit() to prevent NULL-ptr dereference.

Fixes: 6670e152 ("tcp: Namespace-ify sysctl_tcp_default_congestion_control")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit aecfde23 ]

RFC8257 §3.5 explicitly states that "A DCTCP sender MUST react to
loss episodes in the same way as conventional TCP".

Currently, Linux DCTCP performs no cwnd reduction when losses
are encountered. Optionally, the dctcp_clamp_alpha_on_loss resets
alpha to its maximal value if a RTO happens. This behavior
is sub-optimal for at least two reasons: i) it ignores losses
triggering fast retransmissions; and ii) it causes unnecessary large
cwnd reduction in the future if the loss was isolated as it resets
the historical term of DCTCP's alpha EWMA to its maximal value (i.e.,
denoting a total congestion). The second reason has an especially
noticeable effect when using DCTCP in high BDP environments, where
alpha normally stays at low values.

This patch replace the clamping of alpha by setting ssthresh to
half of cwnd for both fast retransmissions and RTOs, at most once
per RTT. Consequently, the dctcp_clamp_alpha_on_loss module parameter
has been removed.

The table below shows experimental results where we measured the
drop probability of a PIE AQM (not applying ECN marks) at a
bottleneck in the presence of a single TCP flow with either the
alpha-clamping option enabled or the cwnd halving proposed by this
patch. Results using reno or cubic are given for comparison.

                          |  Link   |   RTT    |    Drop
                 TCP CC   |  speed  | base+AQM | probability
        ==================|=========|==========|============
                    CUBIC |  40Mbps |  7+20ms  |    0.21%
                     RENO |         |          |    0.19%
        DCTCP-CLAMP-ALPHA |         |          |   25.80%
         DCTCP-HALVE-CWND |         |          |    0.22%
        ------------------|---------|----------|------------
                    CUBIC | 100Mbps |  7+20ms  |    0.03%
                     RENO |         |          |    0.02%
        DCTCP-CLAMP-ALPHA |         |          |   23.30%
         DCTCP-HALVE-CWND |         |          |    0.04%
        ------------------|---------|----------|------------
                    CUBIC | 800Mbps |   1+1ms  |    0.04%
                     RENO |         |          |    0.05%
        DCTCP-CLAMP-ALPHA |         |          |   18.70%
         DCTCP-HALVE-CWND |         |          |    0.06%

We see that, without halving its cwnd for all source of losses,
DCTCP drives the AQM to large drop probabilities in order to keep
the queue length under control (i.e., it repeatedly faces RTOs).
Instead, if DCTCP reacts to all source of losses, it can then be
controlled by the AQM using similar drop levels than cubic or reno.
Signed-off-by: Koen De Schepper <koen.de_schepper@nokia-bell-labs.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com>
Cc: Bob Briscoe <research@bobbriscoe.net>
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Andrew Shewmaker <agshew@gmail.com>
Cc: Glenn Judd <glenn.judd@morganstanley.com>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 09279e61 ]

Syzbot report a kernel-infoleak:

  BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
  Call Trace:
    _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
    copy_to_user include/linux/uaccess.h:174 [inline]
    sctp_getsockopt_peer_addrs net/sctp/socket.c:5911 [inline]
    sctp_getsockopt+0x1668e/0x17f70 net/sctp/socket.c:7562
    ...
  Uninit was stored to memory at:
    sctp_transport_init net/sctp/transport.c:61 [inline]
    sctp_transport_new+0x16d/0x9a0 net/sctp/transport.c:115
    sctp_assoc_add_peer+0x532/0x1f70 net/sctp/associola.c:637
    sctp_process_param net/sctp/sm_make_chunk.c:2548 [inline]
    sctp_process_init+0x1a1b/0x3ed0 net/sctp/sm_make_chunk.c:2361
    ...
  Bytes 8-15 of 16 are uninitialized

It was caused by that th _pad field (the 8-15 bytes) of a v4 addr (saved in
struct sockaddr_in) wasn't initialized, but directly copied to user memory
in sctp_getsockopt_peer_addrs().

So fix it by calling memset(addr->v4.sin_zero, 0, 8) to initialize _pad of
sockaddr_in before copying it to user memory in sctp_v4_addr_to_user(), as
sctp_v6_addr_to_user() does.

Reported-by: syzbot+86b5c7c236a22616a72f@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b75bb8a5 ]

There's a significant number of reports that re-enabling ASPM causes
different issues, ranging from decreased performance to system not
booting at all. This affects only a minority of users, but the number
of affected users is big enough that we better switch off ASPM again.

This will hurt notebook users who are not affected by the issues, they
may see decreased battery runtime w/o ASPM. With the PCI core folks is
being discussed to add generic sysfs attributes to control ASPM.
Once this is in place brave enough users can re-enable ASPM on their
system.

Fixes: a99790bf ("r8169: Reinstate ASPM Support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6289d0fa ]

This is a Qualcomm based device with a QMI function on interface 4.
It is mode switched from 2020:2030 using a standard eject message.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2020 ProdID=2031 Rev= 2.32
S:  Manufacturer=Mobile Connect
S:  Product=Mobile Connect
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f28cd2af ]

The flow action buffer can be resized if it's not big enough to contain
all the requested flow actions. However, this resize doesn't take into
account the new requested size, the buffer is only increased by a factor
of 2x. This might be not enough to contain the new data, causing a
buffer overflow, for example:

[   42.044472] =============================================================================
[   42.045608] BUG kmalloc-96 (Not tainted): Redzone overwritten
[   42.046415] -----------------------------------------------------------------------------

[   42.047715] Disabling lock debugging due to kernel taint
[   42.047716] INFO: 0x8bf2c4a5-0x720c0928. First byte 0x0 instead of 0xcc
[   42.048677] INFO: Slab 0xbc6d2040 objects=29 used=18 fp=0xdc07dec4 flags=0x2808101
[   42.049743] INFO: Object 0xd53a3464 @offset=2528 fp=0xccdcdebb

[   42.050747] Redzone 76f1b237: cc cc cc cc cc cc cc cc                          ........
[   42.051839] Object d53a3464: 6b 6b 6b 6b 6b 6b 6b 6b 0c 00 00 00 6c 00 00 00  kkkkkkkk....l...
[   42.053015] Object f49a30cc: 6c 00 0c 00 00 00 00 00 00 00 00 03 78 a3 15 f6  l...........x...
[   42.054203] Object acfe4220: 20 00 02 00 ff ff ff ff 00 00 00 00 00 00 00 00   ...............
[   42.055370] Object 21024e91: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   42.056541] Object 070e04c3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   42.057797] Object 948a777a: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   42.059061] Redzone 8bf2c4a5: 00 00 00 00                                      ....
[   42.060189] Padding a681b46e: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ

Fix by making sure the new buffer is properly resized to contain all the
requested data.

BugLink: https://bugs.launchpad.net/bugs/1813244Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0db6f8be ]

It returned always NULL, thus it was never possible to get the filter.

Example:
$ ip link add foo type dummy
$ ip link add bar type dummy
$ tc qdisc add dev foo clsact
$ tc filter add dev foo protocol all pref 1 ingress handle 1234 \
	matchall action mirred ingress mirror dev bar

Before the patch:
$ tc filter get dev foo protocol all pref 1 ingress handle 1234 matchall
Error: Specified filter handle not found.
We have an error talking to the kernel

After:
$ tc filter get dev foo protocol all pref 1 ingress handle 1234 matchall
filter ingress protocol all pref 1 matchall chain 0 handle 0x4d2
  not_in_hw
        action order 1: mirred (Ingress Mirror to device bar) pipe
        index 1 ref 1 bind 1

CC: Yotam Gigi <yotamg@mellanox.com>
CC: Jiri Pirko <jiri@mellanox.com>
Fixes: fd62d9f5 ("net/sched: matchall: Fix configuration race")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fae27081 ]

the control path of 'sample' action does not validate the value of 'rate'
provided by the user, but then it uses it as divisor in the traffic path.
Validate it in tcf_sample_init(), and return -EINVAL with a proper extack
message in case that value is zero, to fix a splat with the script below:

 # tc f a dev test0 egress matchall action sample rate 0 group 1 index 2
 # tc -s a s action sample
 total acts 1

         action order 0: sample rate 1/0 group 1 pipe
          index 2 ref 1 bind 1 installed 19 sec used 19 sec
         Action statistics:
         Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
         backlog 0b 0p requeues 0
 # ping 192.0.2.1 -I test0 -c1 -q

 divide error: 0000 [#1] SMP PTI
 CPU: 1 PID: 6192 Comm: ping Not tainted 5.1.0-rc2.diag2+ #591
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_sample_act+0x9e/0x1e0 [act_sample]
 Code: 6a f1 85 c0 74 0d 80 3d 83 1a 00 00 00 0f 84 9c 00 00 00 4d 85 e4 0f 84 85 00 00 00 e8 9b d7 9c f1 44 8b 8b e0 00 00 00 31 d2 <41> f7 f1 85 d2 75 70 f6 85 83 00 00 00 10 48 8b 45 10 8b 88 08 01
 RSP: 0018:ffffae320190ba30 EFLAGS: 00010246
 RAX: 00000000b0677d21 RBX: ffff8af1ed9ec000 RCX: 0000000059a9fe49
 RDX: 0000000000000000 RSI: 000000000c7e33b7 RDI: ffff8af23daa0af0
 RBP: ffff8af1ee11b200 R08: 0000000074fcaf7e R09: 0000000000000000
 R10: 0000000000000050 R11: ffffffffb3088680 R12: ffff8af232307f80
 R13: 0000000000000003 R14: ffff8af1ed9ec000 R15: 0000000000000000
 FS:  00007fe9c6d2f740(0000) GS:ffff8af23da80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fff6772f000 CR3: 00000000746a2004 CR4: 00000000001606e0
 Call Trace:
  tcf_action_exec+0x7c/0x1c0
  tcf_classify+0x57/0x160
  __dev_queue_xmit+0x3dc/0xd10
  ip_finish_output2+0x257/0x6d0
  ip_output+0x75/0x280
  ip_send_skb+0x15/0x40
  raw_sendmsg+0xae3/0x1410
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x60/0x210
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [...]
  Kernel panic - not syncing: Fatal exception in interrupt

Add a TDC selftest to document that 'rate' is now being validated.
Reported-by: Matteo Croce <mcroce@redhat.com>
Fixes: 5c5670fa ("net/sched: Introduce sample tc action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Yotam Gigi <yotam.gi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cb66ddd1 ]

When it is to cleanup net namespace, rds_tcp_exit_net() will call
rds_tcp_kill_sock(), if t_sock is NULL, it will not call
rds_conn_destroy(), rds_conn_path_destroy() and rds_tcp_conn_free() to free
connection, and the worker cp_conn_w is not stopped, afterwards the net is freed in
net_drop_ns(); While cp_conn_w rds_connect_worker() will call rds_tcp_conn_path_connect()
and reference 'net' which has already been freed.

In rds_tcp_conn_path_connect(), rds_tcp_set_callbacks() will set t_sock = sock before
sock->ops->connect, but if connect() is failed, it will call
rds_tcp_restore_callbacks() and set t_sock = NULL, if connect is always
failed, rds_connect_worker() will try to reconnect all the time, so
rds_tcp_kill_sock() will never to cancel worker cp_conn_w and free the
connections.

Therefore, the condition !tc->t_sock is not needed if it is going to do
cleanup_net->rds_tcp_exit_net->rds_tcp_kill_sock, because tc->t_sock is always
NULL, and there is on other path to cancel cp_conn_w and free
connection. So this patch is to fix this.

rds_tcp_kill_sock():
...
if (net != c_net || !tc->t_sock)
...
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

==================================================================
BUG: KASAN: use-after-free in inet_create+0xbcc/0xd28
net/ipv4/af_inet.c:340
Read of size 4 at addr ffff8003496a4684 by task kworker/u8:4/3721

CPU: 3 PID: 3721 Comm: kworker/u8:4 Not tainted 5.1.0 #11
Hardware name: linux,dummy-virt (DT)
Workqueue: krdsd rds_connect_worker
Call trace:
 dump_backtrace+0x0/0x3c0 arch/arm64/kernel/time.c:53
 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:152
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x120/0x188 lib/dump_stack.c:113
 print_address_description+0x68/0x278 mm/kasan/report.c:253
 kasan_report_error mm/kasan/report.c:351 [inline]
 kasan_report+0x21c/0x348 mm/kasan/report.c:409
 __asan_report_load4_noabort+0x30/0x40 mm/kasan/report.c:429
 inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340
 __sock_create+0x4f8/0x770 net/socket.c:1276
 sock_create_kern+0x50/0x68 net/socket.c:1322
 rds_tcp_conn_path_connect+0x2b4/0x690 net/rds/tcp_connect.c:114
 rds_connect_worker+0x108/0x1d0 net/rds/threads.c:175
 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153
 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296
 kthread+0x2f0/0x378 kernel/kthread.c:255
 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117

Allocated by task 687:
 save_stack mm/kasan/kasan.c:448 [inline]
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xd4/0x180 mm/kasan/kasan.c:553
 kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:490
 slab_post_alloc_hook mm/slab.h:444 [inline]
 slab_alloc_node mm/slub.c:2705 [inline]
 slab_alloc mm/slub.c:2713 [inline]
 kmem_cache_alloc+0x14c/0x388 mm/slub.c:2718
 kmem_cache_zalloc include/linux/slab.h:697 [inline]
 net_alloc net/core/net_namespace.c:384 [inline]
 copy_net_ns+0xc4/0x2d0 net/core/net_namespace.c:424
 create_new_namespaces+0x300/0x658 kernel/nsproxy.c:107
 unshare_nsproxy_namespaces+0xa0/0x198 kernel/nsproxy.c:206
 ksys_unshare+0x340/0x628 kernel/fork.c:2577
 __do_sys_unshare kernel/fork.c:2645 [inline]
 __se_sys_unshare kernel/fork.c:2643 [inline]
 __arm64_sys_unshare+0x38/0x58 kernel/fork.c:2643
 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
 invoke_syscall arch/arm64/kernel/syscall.c:47 [inline]
 el0_svc_common+0x168/0x390 arch/arm64/kernel/syscall.c:83
 el0_svc_handler+0x60/0xd0 arch/arm64/kernel/syscall.c:129
 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:960

Freed by task 264:
 save_stack mm/kasan/kasan.c:448 [inline]
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x114/0x220 mm/kasan/kasan.c:521
 kasan_slab_free+0x10/0x18 mm/kasan/kasan.c:528
 slab_free_hook mm/slub.c:1370 [inline]
 slab_free_freelist_hook mm/slub.c:1397 [inline]
 slab_free mm/slub.c:2952 [inline]
 kmem_cache_free+0xb8/0x3a8 mm/slub.c:2968
 net_free net/core/net_namespace.c:400 [inline]
 net_drop_ns.part.6+0x78/0x90 net/core/net_namespace.c:407
 net_drop_ns net/core/net_namespace.c:406 [inline]
 cleanup_net+0x53c/0x6d8 net/core/net_namespace.c:569
 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153
 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296
 kthread+0x2f0/0x378 kernel/kthread.c:255
 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117

The buggy address belongs to the object at ffff8003496a3f80
 which belongs to the cache net_namespace of size 7872
The buggy address is located 1796 bytes inside of
 7872-byte region [ffff8003496a3f80, ffff8003496a5e40)
The buggy address belongs to the page:
page:ffff7e000d25a800 count:1 mapcount:0 mapping:ffff80036ce4b000
index:0x0 compound_mapcount: 0
flags: 0xffffe0000008100(slab|head)
raw: 0ffffe0000008100 dead000000000100 dead000000000200 ffff80036ce4b000
raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8003496a4580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8003496a4600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8003496a4680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff8003496a4700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8003496a4780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 467fa153("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 355b9855 ]

net_hash_mix() currently uses kernel address of a struct net,
and is used in many places that could be used to reveal this
address to a patient attacker, thus defeating KASLR, for
the typical case (initial net namespace, &init_net is
not dynamically allocated)

I believe the original implementation tried to avoid spending
too many cycles in this function, but security comes first.

Also provide entropy regardless of CONFIG_NET_NS.

Fixes: 0b441916 ("netns: introduce the net_hash_mix "salt" for hashes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e8b26b21 ]

Delete initialization of high order entries in mr cache to decrease initial
memory footprint. When required, the administrator can populate the
entries with memory keys via the /sys interface.

This approach is very helpful to significantly reduce the per HW function
memory footprint in virtualization environments such as SRIOV.

Fixes: 9603b61d ("mlx5: Move pci device handling from mlx5_ib to mlx5_core")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reported-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0ab03f35 ]

Currently we may merge incorrectly a received GSO packet
or a packet with frag_list into a packet sitting in the
gro_hash list. skb_segment() may crash case because
the assumptions on the skb layout are not met.
The correct behaviour would be to flush the packet in the
gro_hash list and send the received GSO packet directly
afterwards. Commit d61d072e ("net-gro: avoid reorders")
sets NAPI_GRO_CB(skb)->flush in this case, but this is not
checked before merging. This patch makes sure to check this
flag and to not merge in that case.

Fixes: d61d072e ("net-gro: avoid reorders")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3d883026 ]

NULL or ZERO_SIZE_PTR will be returned for zero sized memory
request, and derefencing them will lead to a segfault

so it is unnecessory to call vzalloc for zero sized memory
request and not call functions which maybe derefence the
NULL allocated memory

this also fixes a possible memory leak if phy_ethtool_get_stats
returns error, memory should be freed before exit
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Wang Li <wangli39@baidu.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>