- 07 Feb, 2008 40 commits
-
-
Maciej W. Rozycki authored
Remove unused module function prototypes that would not even build if enabled. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jason Uhlenkott authored
By popular request, add a comment documenting the implicit type promotion here. Signed-off-by:
Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by:
Doug Thompson <dougthompson@xmission.com> Signed-off-by:
-
Hitoshi Mitake authored
There is a missing sequence of initialization code during startup. Signed-off-by:
Hitoshi Mitake <h.mitake@gmail.com> Signed-off-by:
Doug Thompson <dougthompson@xmisson.com> Signed-off-by:
-
Doug Thompson authored
Made a previous global variable, static in scope Signed-off-by:
-
Jason Uhlenkott authored
Modified to run on x86_64 as well as x86 i3000_edac builds (and runs) fine on x86_64. Signed-off-by:
-
Bryan Boatright authored
Using the EDAC code in kernel.org kernel version 2.6.23.8 I am seeing the following problem: In the kernel there is a pci device attribute located in sysfs that is checked by the EDAC PCI scanning code. If that attribute is set, PCI parity/error scannining is skipped for that device. The attribute is: broken_parity_status as is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directorys for PCI devices. I don't think this check was actually implemented. I have a misbehaved card that reports a parity error every 1000 ms: Nov 25 07:28:43 beta kernel: EDAC PCI: Master Data Parity Error on 0000:05:01.0 Nov 25 07:28:44 beta kernel: EDAC PCI: Master Data Parity Error on 0000:05:01.0 Nov 25 07:28:45 beta kernel: EDAC PCI: Master Data Parity Error on 0000:05:01.0 Setting that card's broken_parity_status bit did not mask the error: echo "1" > /sys/bus/pci/devices/0000:05:01.0/broken_parity_status I looked through the EDAC code and did not readily see any reference to broken_parity_status at all (which makes sense based on the behavior I am seeing). I applied the following patch as a proof-of-concept and now EDAC's PCI parity error reporting behaves as documented: bryan Good regression find, bryan. It used to work. sigh. I added more logic to your patch, for more coverage of the error. Doug T Signed-off-by:Bryan Boatright <b1@omega71.com> Signed-off-by:
-
Dave Jiang authored
Marvell mv64x60 SoC support for EDAC. Used on PPC and MIPS platforms. Development and testing done on PPC Motorola prpmc2800 ATCA board. [akpm@linux-foundation.org: make mv64x60_ctl_name static] Signed-off-by:
Dave Jiang <djiang@mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by:
-
Dave Jiang authored
EDAC chip driver support for Freescale MPC85xx platforms. PPC based. Signed-off-by:
-
Jason Uhlenkott authored
Replace function-like macros with functions. Signed-off-by:
-
Jason Uhlenkott authored
Style cleanup, mostly just 80-column fixes. Signed-off-by:
-
Benjamin Herrenschmidt authored
Adds driver for the Cell memory controller when used without a Hypervisor such as on the IBM Cell blades. There might still be some improvements to do to this such as finding if it's possible to properly obtain more details about the address of the error but it's good enough already to report CE counts which is our main priority at the moment. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by:
-
Benjamin Herrenschmidt authored
Add the definitions for the Rambus XDR memory type used by the Cell processor. It's a pre-requisite for the followup Cell EDAC patch. Signed-off-by:
-
Anton Blanchard authored
When rounding a relative timeout we need to use round_jiffies_relative(). Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by:
-
Doug Thompson authored
ENABLE the 'logging' of CE and UE events for the EDAC_DEVICE class of error harvester in EDAC Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by:
-
Samuel Ortiz authored
This is a patch for the Compaq ASIC3 multi function chip, found in many PDAs (iPAQs, HTCs...). It is a simplified version of Paul Sokolovsky's first proposal [1]. With this code, it is basically a GPIO and IRQ expander. My plan is to add more features once this patch gets reviewed and accepted. [1] http://lkml.org/lkml/2007/5/1/46Signed-off-by:
Samuel Ortiz <sameo@openedhand.com> Cc: Paul Sokolovsky <pmiscml@gmail.com> Cc: Ben Dooks <ben@trinity.fluff.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Paul Jackson authored
Update cpuset documentation to match the October 2007 "Fix cpusets update_cpumask" changes that now apply changes to a cpusets 'cpus' allowed mask immediately to the cpus_allowed of the tasks in that cpuset. Signed-off-by:
Paul Jackson <pj@sgi.com> Acked-by:
Cliff Wickman <cpw@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Pavel Emelyanov authored
There's one place that works with task pids - its the "tasks" file in cgroups. The read/write handlers assume, that the pid values go to/come from the user space and thus it is a virtual pid, i.e. the pid as it is seen from inside a namespace. Tune the code accordingly. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Paul Menage <menage@google.com> Signed-off-by:
-
Paul Jackson authored
- Narrow the scope of callback_mutex in scan_for_empty_cpusets(). - Avoid rewriting the cpus, mems of cpusets except when it is likely that we'll be changing them. - Have remove_tasks_in_empty_cpuset() also check for empty mems. Signed-off-by:
-
Paul Jackson authored
Various minor formatting and comment tweaks to Cliff Wickman's [PATCH_3_of_3]_cpusets__update_cpumask_revision.patch I had had "iff", meaning "if and only if" in a comment. However, except for ancient mathematicians, the abbreviation "iff" was a tad too cryptic. Cliff changed it to "if", presumably figuring that the "iff" was a typo. However, it was the "only if" half of the conjunction that was most interesting. Reword to emphasis the "only if" aspect. The locking comment for remove_tasks_in_empty_cpuset() was wrong; it said callback_mutex had to be held on entry. The opposite is true. Several mentions of attach_task() in comments needed to be changed to cgroup_attach_task(). A comment about notify_on_release was no longer relevant, as the line of code it had commented, namely: set_bit(CS_RELEASED_RESOURCE, &parent->flags); is no longer present in that place in the cpuset.c code. Similarly a comment about notify_on_release before the scan_for_empty_cpusets() routine was no longer relevant. Removed extra parentheses and unnecessary return statement. Renamed attach_task() to cpuset_attach() in various comments. Removed comment about not needing memory migration, as it seems the migration is done anyway, via the cpuset_attach() callback from cgroup_attach_task(). Signed-off-by:
-
Paul Menage authored
Some of the comments in kernel/cpuset.c were stale following the transition to control groups; this patch updates them to more closely match reality. Signed-off-by:
-
Cliff Wickman authored
Use the new function cgroup_scan_tasks() to step through all tasks in a cpuset. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Cliff Wickman authored
This patch corrects a situation that occurs when one disables all the cpus in a cpuset. Currently, the disabled (cpu-less) cpuset inherits the cpus of its parent, which is incorrect because it may then overlap its cpu-exclusive sibling. Tasks of an empty cpuset should be moved to the cpuset which is the parent of their current cpuset. Or if the parent cpuset has no cpus, to its parent, etc. And the empty cpuset should be released (if it is flagged notify_on_release). Depends on the cgroup_scan_tasks() function (proposed by David Rientjes) to iterate through all tasks in the cpu-less cpuset. We are deliberately avoiding a walk of the tasklist. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Cliff Wickman authored
Provide cgroup_scan_tasks(), which iterates through every task in a cgroup, calling a test function and a process function for each. And call the process function without holding the css_set_lock lock. The idea is David Rientjes', predicting that such a function will make it much easier in the future to extend things that require access to each task in a cgroup without holding the lock, [akpm@linux-foundation.org: cleanup] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Documentation updates for memory controller. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
Balbir Singh authored
Based on the discussion at http://lkml.org/lkml/2007/12/20/383, it was felt that control_type might not be a good thing to implement right away. We can add this flexibility at a later point when required. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Now, lru is per-zone. Then, lru_lock can be (should be) per-zone, too. This patch implementes per-zone lru lock. lru_lock is placed into mem_cgroup_per_zone struct. lock can be accessed by mz = mem_cgroup_zoneinfo(mem_cgroup, node, zone); &mz->lru_lock or mz = page_cgroup_zoneinfo(page_cgroup); &mz->lru_lock Signed-off-by:
KAMEZAWA hiroyuki <kmaezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
This patch implements per-zone lru for memory cgroup. This patch makes use of mem_cgroup_per_zone struct for per zone lru. LRU can be accessed by mz = mem_cgroup_zoneinfo(mem_cgroup, node, zone); &mz->active_list &mz->inactive_list or mz = page_cgroup_zoneinfo(page_cgroup); &mz->active_list &mz->inactive_list Signed-off-by:
-
KAMEZAWA Hiroyuki authored
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: -
KAMEZAWA Hiroyuki authored
per-zone and reclaim enhancements for memory controller: calculate the number of pages to be scanned per cgroup Define function for calculating the number of scan target on each Zone/LRU. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Functions to remember reclaim priority per cgroup (as zone->prev_priority) [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: more build fixes] Signed-off-by:
-
KAMEZAWA Hiroyuki authored
per-zone and reclaim enhancements for memory controller: calculate active/inactive imbalance per cgroup Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Define function for calculating mapped_ratio in memory cgroup. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
This patch adds per-zone status in memory cgroup. These values are often read (as per-zone value) by page reclaiming. In current design, per-zone stat is just a unsigned long value and not an atomic value because they are modified only under lru_lock. (So, atomic_ops is not necessary.) This patch adds ACTIVE and INACTIVE per-zone status values. For handling per-zone status, this patch adds struct mem_cgroup_per_zone { ... } and some helper functions. This will be useful to add per-zone objects in mem_cgroup. This patch turns memory controller's early_init to be 0 for calling kmalloc() in initialization. Acked-by: -
KAMEZAWA Hiroyuki authored
Add macro to get node_id and zone_id of page_cgroup. Will be used in per-zone-xxx patches and others. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
This is used to detect which scan_control scans global lru or mem_cgroup lru. And compiled to be static value (1) when memory controller is not configured. This may make the meaning obvious. Acked-by:
-
KAMEZAWA Hiroyuki authored
Add pre_destroy handler for mem_cgroup and try to make mem_cgroup empty at rmdir(). Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Add a handler "pre_destroy" to cgroup_subsys. It is called before cgroup_rmdir() checks all subsys's refcnt. I think this is useful for subsys which have some extra refs even if there are no tasks in cgroup. By adding pre_destroy(), the kernel keeps the rule "destroy() against subsystem is called only when refcnt=0." and allows css ref to be used by other objects than tasks. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Show accounted information of memory cgroup by memory.stat file [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix printk warning] Signed-off-by:
YAMAMOTO Takashi <yamamoto@valinux.co.jp> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Add statistics account infrastructure for memory controller. All account information is stored per-cpu and caller will not have to take lock or use atomic ops. This will be used by memory.stat file later. CACHE includes swapcache now. I'd like to divide it to PAGECACHE and SWAPCACHE later. This patch adds 3 functions for accounting. * __mem_cgroup_stat_add() ... for usual routine. * __mem_cgroup_stat_add_safe ... for calling under irq_disabled section. * mem_cgroup_read_stat() ... for reading stat value. * renamed PAGECACHE to CACHE (because it may include swapcache *now*) [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix smp_processor_id-in-preemptible] [akpm@linux-foundation.org: uninline things] [akpm@linux-foundation.org: remove dead code] Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Remember page_cgroup is on active_list or not in page_cgroup->flags. Signed-off-by:
-
