- 12 Nov, 2019 40 commits
-
-
Aya Levin authored
Remove redundant code from fw_fatal reporter's dump callback. Use updated devlink interface of binary fmsg pair which breaks the output into chunks internally. Signed-off-by:
Aya Levin <ayal@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Aya Levin authored
Devlink supports pair output of name and value. When the value is binary, it must be presented in an array. If the length of the binary value exceeds fmsg limitation, break the value into chunks internally. Signed-off-by:
-
Russell King authored
When building with SFP disabled, the stub for sfp_bus_add_upstream() missed "inline". Add it. Fixes: 727b3668 ("net: sfp: rework upstream interface") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
zhengbin authored
Fix sparse warnings: drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c:242:6: warning: symbol 'cxgb4_mqprio_free_hw_resources' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 2d0cb84d ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
David S. Miller authored
zhengbin says: ==================== net: atlantic: make some symbol & function static v1->v2: add Fixes tag ==================== Signed-off-by: -
zhengbin authored
Fix sparse warnings: drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c:706:5: warning: symbol 'aq_ethtool_get_priv_flags' was not declared. Should it be static? drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c:713:5: warning: symbol 'aq_ethtool_set_priv_flags' was not declared. Should it be static? Reported-by:
-
zhengbin authored
Fix sparse warnings: drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c:426:25: warning: symbol 'aq_pm_ops' was not declared. Should it be static? Reported-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add extended ACK for EMADs Shalom says: Ethernet Management Datagrams (EMADs) are Ethernet packets sent between the driver and device's firmware. They are used to pass various configurations to the device, but also to get events (e.g., port up) from it. After the Ethernet header, these packets are built in a TLV format. Up until now, whenever the driver issued an erroneous register access it only got an error code indicating a bad parameter was used. This patch set adds a new TLV (string TLV) that can be used by the firmware to encode a 128 character string describing the error. The new TLV is allocated by the driver and set to zeros. In case of error, the driver will check the length of the string in the response and report it using devlink hwerr tracepoint. Example: $ perf record -a -q -e devlink:devlink_hwerr & $ pkill -2 perf $ perf script -F trace:event,trace | grep hwerr devlink:devlink_hwerr: bus_name=pci dev_name=0000:03:00.0 driver_name=mlxsw_spectrum err=7 (tid=9913892d00001593,reg_id=8018(rauhtd)) bad parameter (inside er_rauhtd_write_query(), num_rec=32 is over the maximum number of records supported) Patch #1 parses the offsets of the different TLVs in incoming EMADs and stores them in the skb's control block. This makes it easier to later add new TLVs. Patches #2-#3 remove deprecated TLVs and add string TLV definition. Patches #4-#7 gradually add support for the new string TLV. v2: * Use existing devlink hwerr tracepoint to report the error string, instead of printing it to kernel log ==================== Signed-off-by: -
Shalom Toledo authored
Make sure to enable EMAD string TLV only after using the required firmware version. Signed-off-by:
Shalom Toledo <shalomt@mellanox.com> Acked-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Shalom Toledo authored
In case the firmware had an error while processing EMADs, it can send back an ASCII string with the reason using EMAD string TLV. This patch adds the support for using EMAD string TLV. In case of an error, reports the reason using devlink hwerr tracepoint. Signed-off-by:
-
Shalom Toledo authored
Extend EMAD information reported to devlink hwerr tracepoint with transaction id and reg id (both, hex and string). Signed-off-by:
-
Shalom Toledo authored
During parsing of incoming EMADs, fill the string TLV's offset when it is used. Signed-off-by:
-
Shalom Toledo authored
Add EMAD string TLV, an ASCII string the driver can receive from the firmware in case of an error. Signed-off-by:
-
Shalom Toledo authored
Remove deprecated EMAD TLVs. Signed-off-by:
-
Shalom Toledo authored
Until now the code assumes a fixed structure which makes it difficult to support EMADs with and without new TLVs. Make it more generic by parsing the TLVs when the EMADs are received and store the offset to the different TLVs in the control block. Using these offsets to extract information from the EMADs without relying on a specific structure. Signed-off-by:
-
Mao Wenan authored
If TI_DAVINCI_EMAC=y and GENERIC_ALLOCATOR is not set, below erros can be seen: drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_desc_pool_destroy.isra.14': davinci_cpdma.c:(.text+0x359): undefined reference to `gen_pool_size' davinci_cpdma.c:(.text+0x365): undefined reference to `gen_pool_avail' davinci_cpdma.c:(.text+0x373): undefined reference to `gen_pool_avail' davinci_cpdma.c:(.text+0x37f): undefined reference to `gen_pool_size' drivers/net/ethernet/ti/davinci_cpdma.o: In function `__cpdma_chan_free': davinci_cpdma.c:(.text+0x4a2): undefined reference to `gen_pool_free_owner' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_chan_submit_si': davinci_cpdma.c:(.text+0x66c): undefined reference to `gen_pool_alloc_algo_owner' davinci_cpdma.c:(.text+0x805): undefined reference to `gen_pool_free_owner' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_ctlr_create': davinci_cpdma.c:(.text+0xabd): undefined reference to `devm_gen_pool_create' davinci_cpdma.c:(.text+0xb79): undefined reference to `gen_pool_add_owner' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_check_free_tx_desc': davinci_cpdma.c:(.text+0x16c6): undefined reference to `gen_pool_avail' This patch mades TI_DAVINCI_EMAC select GENERIC_ALLOCATOR. Fixes: 99f62971 ("net: ethernet: ti: cpsw: drop TI_DAVINCI_CPDMA config option") Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Improvements for -next Misc improvements for stmmac. Patch 1/6, fixes a sparse warning that was introduced in recent commit in -next. Patch 2/6, adds the Split Header support which is also available in XGMAC cores and now in GMAC4+ with this patch. Patch 3/6, adds the C45 support for MDIO transactions when using XGMAC cores. Patch 4/6, removes the speed dependency on CBS callbacks so that it can be used in XGMAC cores. Patch 5/6, reworks the over-engineered stmmac_rx() function so that its easier to read. Patch 6/6, implements the UDP Segmentation Offload feature in GMAC4+ cores. ==================== Signed-off-by: -
Jose Abreu authored
Implement the UDP Segmentation Offload feature in stmmac. This is only available in GMAC4+ cores. Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
This looks over-engineered. Let's use some helpers to get the buffer length and hereby simplify the stmmac_rx() function. No performance drop was seen with the new implementation. Signed-off-by:
-
Jose Abreu authored
XGMAC3 supports full CBS features with speeds that can go up to 10G so we can now remove the maximum speed check of CBS. Signed-off-by:
-
Jose Abreu authored
Add the support for C45 PHYs in the MDIO callbacks for XGMAC. This was tested using Synopsys DesignWare XPCS. v2: - Pull out the readl_poll_timeout() calls into common code (Andrew) Signed-off-by:
-
Jose Abreu authored
GMAC4+ cores also support the Split Header feature. Add the support for Split Header feature in the RX path following the same implementation logic that XGMAC followed. Signed-off-by:
-
Jose Abreu authored
The VID is converted to le16 so the variable must be __le16 type. Reported-by:
kbuild test robot <lkp@intel.com> Fixes: c7ab0b80 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available") Signed-off-by:
-
Colin Ian King authored
Variable hdr_len is being assigned a value that is never read. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Variable err is not uninitialized and hence can potentially contain any garbage value. This may cause an error when logical or'ing the return values from the calls to functions crypto_aead_setauthsize or crypto_aead_setkey. Fix this by setting err to the return of crypto_aead_setauthsize rather than or'ing in the return into the uninitialized variable Addresses-Coverity: ("Uninitialized scalar variable") Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Signed-off-by: -
Madalin Bucur authored
The sysfs paths changed, updating to the current ones. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Madalin Bucur authored
Recent changes in the dpaa_eth driver reduced the number of buffer pools per interface from three to one. Signed-off-by:
-
Jesper Dangaard Brouer authored
Side effect of some kbuild changes resulted in breaking the documented way to build samples/bpf/. This patch change the samples/bpf/Makefile to work again, when invoking make from the subdir samples/bpf/. Also update the documentation in README.rst, to reflect the new way to build. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Jiri Pirko authored
Call devlink enable only during probe time and avoid deadlock during reload. Reported-by:
-
Heiner Kallweit authored
Add support for chip version RTL8117. Settings have been copied from Realtek's r8168 driver, there however chip ID 54a belongs to a chip version called RTL8168FP. It was confirmed that RTL8117 works with Realtek's driver, so both chip versions seem to be the same or at least compatible. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Russell King says: ==================== sfp: Allow slow to initialise GPON modules to work Some GPON modules take longer than the SFF MSA specified time to initialise and respond to transactions on the I2C bus for either both 0x50 and 0x51, or 0x51 bus addresses. Technically these modules are non-compliant with the SFP Multi-Source Agreement, they have been around for some time, so are difficult to just ignore. Most of the patch series is restructuring the code to make it more readable, and split various things into separate functions. We split the three state machines into three separate functions, and re-arrange them to start probing the module as soon as a module has been detected (without waiting for the network device.) We try to read the module's EEPROM, retrying quickly for the first second, and then once every five seconds for about a minute until we have read the EEPROM. So that the kernel isn't entirely silent, we print a message indicating that we're waiting for the module to respond after the first second, or when all retries have expired. Once the module ID has been read, we kick off a delayed work queue which attempts to register the hwmon, retrying for up to a minute if the monitoring parameters are unreadable; this allows us to proceed with module initialisation independently of the hwmon state. With high-power modules, we wait for the netdev to be attached before switching the module power mode, and retry this in a similar way to before until we have successfully read and written the EEPROM at 0x51. We also move the handling of the TX_DISABLE signal entirely to the main state machine, and avoid probing any on-board PHY while TX_FAULT is set. ==================== Signed-off-by: -
Russell King authored
When a module is inserted, we attempt to read read the ID from address 0x50. Once we are able to read the ID, we immediately attempt to initialise the hwmon support by reading from address 0x51. If this fails, then we fall into error state, and assume that the module is not usable. Modules such as the ALCATELLUCENT 3FE46541AA use a real EEPROM for I2C address 0x50, which responds immediately. However, address 0x51 is an emulated, which only becomes available once the on-board firmware has booted. This prompts us to fall into the error state. Since the module may be usable without diagnostics, arrange for the hwmon probe independent of the rest of the SFP itself, retrying every 5s for up to about 60s for the monitoring to become available, and print an error message if it doesn't become available. Signed-off-by:
-
Russell King authored
Some GPON modules (e.g. Huawei MA5671A) take a significant amount of time to start responding on the I2C bus, contary to the SFF specifications. Work around this by implementing a two-level timeout strategy, where we initially quickly retry for the module, and then use a slower retry after we exceed a maximum number of quick attempts. Signed-off-by:
-
Russell King authored
Move the module insertion reporting out of the probe handling, but after we have detected that the upstream has attached (since that is whom we are reporting insertion to.) Only report module removal if we had previously reported a module insertion. This gives cleaner semantics, and means we can probe the module before we have an upstream attached. Signed-off-by:
-
Russell King authored
Switch the power mode switching from the probe, so that we don't repeatedly re-probe the SFP device if there is a problem accessing the registers at I2C address 0x51. In splitting this out, we can also fix a bug where we leave the module in high-power mode when the upstream device is detached but the module is still inserted. Signed-off-by:
-
Russell King authored
Track the upstream's attachment state in the state machine rather than maintaining a boolean, which ensures that we have a strict order of ATTACH followed by an UP event - we can never believe that a newly attached upstream will be anything but down. Rearrange the order of state machines so we run the module state machine after the upstream device's state machine, so the module state machine can check the current state of the device and take action to e.g. reset back to empty state when the upstream is detached. This is to allow the module detection to run independently of the network device becoming available. Signed-off-by:
-
Russell King authored
TX_FAULT should be deasserted to indicate that the module has completed its initialisation. This may include the on-board PHY, so wait until the module has deasserted TX_FAULT before probing the PHY. This means that we need an extra state to handle a TX_FAULT that remains set for longer than t_init, since using the existing handling state would bypass the PHY probe. Signed-off-by:
-
Russell King authored
Add the next state to sfp_sm_fault() so that it can branch to other states. This will be necessary to improve the initialisation path. Signed-off-by:
-
Russell King authored
Rather than using mdelay() to wait before probing the PHY (which holds several locks, including the rtnl lock), add an extra wait state to the state machine to introduce the 50ms delay without holding any locks. Signed-off-by:
-
Russell King authored
Move the PHY probe into a separate function, splitting it from sfp_sm_mod_init(). This will allow us to eliminate the 50ms mdelay() inside the state machine. Signed-off-by:
-
