1. 13 May, 2015 33 commits
  2. 12 May, 2015 7 commits
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 6c9d370c
      Linus Torvalds authored
      Pull MIPS fixes from Ralf Baechle:
       "One build fix for build breakage of all MIPS SMP kernels caused by
        Rusty's fix of obsolete use of cpu mask helpers, another to fix the FP
        ABI selection when loading an ELF binary"
      
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
        MIPS: fix FP mode selection in lieu of .MIPS.abiflags data
        MIPS: SMP: Fix build error.
      6c9d370c
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma · 03906ca3
      Linus Torvalds authored
      Pull rdma fixes from Doug Ledford:
       - update MAINTAINERS git repo pointer
       - printk garbage fix
       - fix for qib and iw_cxgb4 bugs introduced in 4.1 window
       - fix for an older iWARP netlink bug
       - fix a memcpy issue in ehca driver
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
        infiniband: Remove duplicated KERN_<LEVEL> from pr_<level> uses
        IB/qib: fix test of unsigned variable
        RDMA/core: Fix for parsing netlink string attribute
        MAINTAINERS: update the official rdma git repo
        iw_cxgb4: use wildcard mapping for getting remote addr info
        IB/ehca: use correct destination for memcpy
      03906ca3
    • Nicolas Dichtel's avatar
      netns: return RTM_NEWNSID instead of RTM_GETNSID on a get · e3d8ecb7
      Nicolas Dichtel authored
      Usually, RTM_NEWxxx is returned on a get (same as a dump).
      
      Fixes: 0c7aecd4 ("netns: add rtnl cmd to add and get peer netns ids")
      Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e3d8ecb7
    • Linus Torvalds's avatar
      Merge tag 'for-v4.1-rc' of git://git.infradead.org/battery-2.6 · cc49e8c9
      Linus Torvalds authored
      Pull power supply and reset fixes from Sebastian Reichel:
       "misc fixes"
      
      * tag 'for-v4.1-rc' of git://git.infradead.org/battery-2.6:
        power: bq27x00_battery: Add missing MODULE_ALIAS
        power: reset: Add MFD_SYSCON depends for brcmstb
        power: reset: ltc2952: Remove bogus hrtimer_start() return value checks
        power_supply: fix oops in collie_battery driver
        power/reset: at91: fix return value check in at91_reset_platform_probe()
        MAINTAINERS: Add me as maintainer of Nokia N900 power supply drivers
        axp288_fuel_gauge: Add original author details
      cc49e8c9
    • David S. Miller's avatar
      Merge branch 'switchdev_spring_cleanup' · a62b70dd
      David S. Miller authored
      Scott Feldman says:
      
      ====================
      switchdev: spring cleanup
      
      v7:
      
      Address review comments:
      
       - [Jiri] split the br_setlink and br_dellink reverts into their own patches
       - [Jiri] some parameter cleanup of rocker's memory allocators
       - [Jiri] pass trans mode as formal parameter rather than hanging off of
           rocker_port.
      
      v6:
      
      Address review comments:
      
       - [Jiri] split a couple of patches into one-logical-change per patch
       - [Joe Perches] revert checkpatch -f changes for wrapped lines with long
           symbols.
      
      v5:
      
      Address review comments:
      
       - [Jiri] include Jiri's s/swdev/switchdev rename patches up front.
       - [Jiri] squash some patches.  Now setlink/dellink/getlink patches are in
           three parts: new implementation, convert drivers to new, delete old impl.
       - [Jiri] some minor variable renames
       - [Jiri] use BUG_ON rather than WARN when COMMIT phase fails when PREPARE
           phase said it was safe to come into the water.
       - [Simon] rocker: fix a few transaction prepare-commit cases that were wrong.
           This was the bulk of the changes in v5.
      
      v4:
      
      Well, it was a lot of work, but now prepare-commit transaction model is how
      davem advises: if prepare fails, abort the transaction.  The driver must do
      resource reservations up front in prepare phase and return those resources if
      aborting.  Commit phase would use reserved resources.  The good news is the
      driver code (for rocker) now handles resource allocation failures better by not
      leaving partially device or driver states.  This is a side-effect of the
      prepare phase where state isn't modified; only validation of inputs and
      resource reservations happen in the prepare phase.  Since we're supporting
      setting attrs and add objs across lower devs in the stacked case, we need to
      hold rtnl_lock (or ensure rtnl_lock is held) so lower devs don't move on us
      during the prepare-commit transaction.  DSA driver code skips the prepare phase
      and goes straight for the commit phase since no up-front allocations are done
      and no device failures (that could be detected in the prepare phase) can
      happen.
      
      Remove NETIF_F_HW_SWITCH_OFFLOAD from rocker and the swdev_attr_set/get
      wrappers.  DSA doesn't set NETIF_F_HW_SWITCH_OFFLOAD, so it can't be in
      swdev_attr_set/get.  rocker doesn't need it; or rather can't support
      NETIF_F_HW_SWITCH_OFFLOAD being set/cleared at run-time after the device
      port is already up and offloading L2/L3.  NETIF_F_HW_SWITCH_OFFLOAD is still
      left as a feature flag for drivers that can use it.
      
      Drop the renaming patch for netdev_switch_notifier.  Other renames are a
      result of moving to the attr get/set or obj add/del model.  Everything
      but the netdev_switch_notifier is still prefixed with "swdev_".
      
      v3:
      
      Move to two-phase prepare-commit transaction model for attr set and obj add.
      Driver gets a change in prepare phase to NACK transaction if lack of resources
      or support in device.
      
      v2:
      
      Address review comments:
      
       - [Jiri] squash a few related patches
       - [Roopa] don't remove NETIF_F_HW_SWITCH_OFFLOAD
       - [Roopa] address VLAN setlink/dellink
       - [Ronen] print warning is attr set revert fails
      
      Not address:
      
       - Using something other than "swdev_" prefix
       - Vendor extentions
      
      The patch set grew a bit to not only support port attr get/set but also add
      support for port obj add/del.  Example of port objs are VLAN, FDB entries, and
      FIB entries.  The VLAN support now allows the swdev driver to get VLAN ranges
      and flags like PVID and "untagged".  Sridhar will be adding FDB obj support
      in follow-on patch.
      
      v1:
      
      The main theme of this patch set is to cleanup swdev in preparation for
      new features or fixes to be added soon.  We have a pretty good idea now how
      to handle stacked drivers in swdev, but there where some loose ends.  For
      example, if a set failed in the middle of walking the lower devs, we would
      leave the system in an undefined state...there was no way to recover back to
      the previous state.  Speaking of sets, also recognize a pattern that most
      swdev API accesses are gets or sets of port attributes, so go ahead and make
      port attr get/set the central swdev API, and convert everything that is
      set-ish/get-ish to this new API.
      
      Features/fixes that should follow from this cleanup:
      
       - solve the duplicate pkt forwarding issue
       - get/set bridge attrs, like ageing_time, from/to device
       - get/set more bridge port attrs from/to device
      
      There are some rename cleanups tagging along at the end, to give swdev
      consistent naming.
      
      And finally, some much needed updates to the switchdev.txt documentation to
      hopefully capture the state-of-the-art of swdev.  Hopefully, we can do a better
      job keeping this document up-to-date.
      
      Tested with rocker, of course, to make sure nothing functional broke.  There
      are a couple minor tweaks to DSA code for getting switch ID and setting STP
      updates to use new API, but not expecting amy breakage there.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a62b70dd
    • Scott Feldman's avatar
      switchdev: bring documentation up-to-date · 4ceec22d
      Scott Feldman authored
      Much need updated of switchdev documentation to cover what's been
      implmented to-date.  There are some XXX comments in the text for
      unimplemented or broken items.  I'd like to keep these in there (poor-man's
      TODO list) and update the document once each issue is resolved.
      Signed-off-by: default avatarScott Feldman <sfeldma@gmail.com>
      Acked-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4ceec22d
    • Scott Feldman's avatar
      rocker: make checkpatch -f clean · 4725ceb9
      Scott Feldman authored
      Well almost clean: ignore the CHECKs for space after cast operator and some
      longer-than-80 char cases where for readability it's better to keep as-is.
      Signed-off-by: default avatarScott Feldman <sfeldma@gmail.com>
      Acked-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4725ceb9