* pci/irq-fixups:
  PCI: Inline and remove pcibios_update_irq()
  PCI: Remove unused pci_fixup_irqs() function
  sparc/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  unicore32/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  tile/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  m68k/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  sh/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks
  sh/PCI: Remove __init optimisations from IRQ mapping functions/data
  MIPS: PCI: Fix pcibios_scan_bus() NULL check code path

* pci/hotplug:
  PCI: pciehp: Report power fault only once until we clear it
  PCI: shpchp: Enable bridge bus mastering if MSI is enabled

* pci/enumeration:
  PCI: Warn periodically while waiting for non-CRS ("device ready") status
  PCI: Wait up to 60 seconds for device to become ready after FLR
  PCI: Factor out pci_bus_wait_crs()
  PCI: Add pci_bus_crs_vendor_id() to detect CRS response data
  PCI: Always check for non-CRS response before timeout
  PCI: Avoid race while enabling upstream bridges
  PCI: Mark Broadcom HT2100 Root Port Extended Tags as broken

* pci/dpc:
  PCI/DPC: Add local struct device pointers
  PCI/DPC: Add eDPC support

* pci/aer:
  PCI/AER: Reformat AER register definitions
  PCI/portdrv: Move error handler methods to struct pcie_port_service_driver

* pci/endpoint:
  tools: PCI: Add a missing option help line
  misc: pci_endpoint_test: Enable/Disable MSI using module param
  misc: pci_endpoint_test: Avoid using hard-coded BAR sizes
  misc: pci_endpoint_test: Add support to not enable MSI interrupts
  misc: pci_endpoint_test: Add support to provide aligned buffer addresses
  misc: pci_endpoint_test: Add support for PCI_ENDPOINT_TEST regs to be mapped to any BAR
  PCI: designware-ep: Do not disable BARs during initialization
  PCI: dra7xx: Reset all BARs during initialization
  PCI: dwc: designware: Provide page_size to pci_epc_mem
  PCI: endpoint: Remove the ->remove() callback
  PCI: endpoint: Add support to poll early for host commands
  PCI: endpoint: Add support to use _any_ BAR to map PCI_ENDPOINT_TEST regs
  PCI: endpoint: Do not reset *command* inadvertently
  PCI: endpoint: Add "volatile" to pci_epf_test_reg
  PCI: endpoint: Add support for configurable page size
  PCI: endpoint: Make ->remove() callback optional
  PCI: endpoint: Add an API to get matching "pci_epf_device_id"
  PCI: endpoint: Use of_dma_configure() to set initial DMA mask

* pci/host-xilinx:
  PCI: xilinx-nwl: Fix platform_get_irq() error handling
  PCI: xilinx: Allow build on MIPS platforms
  PCI: xilinx: Don't enable config completion interrupts
  PCI: xilinx: Unify INTx & MSI interrupt decode
  PCI: xilinx-nwl: Translate INTx range to hwirqs 0-3
  PCI: xilinx: Translate INTx range to hwirqs 0-3

* pci/host-xgene:
  PCI: xgene: Clean up whitespace
  PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset
  PCI: xgene: Fix platform_get_irq() error handling

* pci/host-vmd:
  iommu/vt-d: Prevent VMD child devices from being remapping targets
  x86/PCI: Use is_vmd() rather than relying on the domain number
  x86/PCI: Move VMD quirk to x86 fixups
  MAINTAINERS: Add Jonathan Derrick as VMD maintainer
  PCI: vmd: Remove IRQ affinity so we can allocate more IRQs
  PCI: vmd: Free up IRQs on suspend path
  PCI: vmd: Assign vector zero to all bridges
  PCI: vmd: Reserve IRQ pre-vector for better affinity

* pci/host-tegra:
  PCI: tegra: Explicitly request exclusive reset control

* pci/host-spear13xx:
  PCI: spear13xx: Fix platform_get_irq() error handling

* pci/host-rockchip:
  PCI: rockchip: Fix platform_get_irq() error handling
  PCI: rockchip: Umap IO space if probe fails
  PCI: rockchip: Remove IRQ domain if probe fails
  PCI: rockchip: Disable vpcie0v9 if resume_noirq fails
  PCI: rockchip: Clean up PHY if driver probe or resume fails
  PCI: rockchip: Factor out rockchip_pcie_deinit_phys()
  PCI: rockchip: Factor out rockchip_pcie_disable_clocks()
  PCI: rockchip: Factor out rockchip_pcie_enable_clocks()
  PCI: rockchip: Factor out rockchip_pcie_setup_irq()
  PCI: rockchip: Use gpiod_set_value_cansleep() to allow reset via expanders
  PCI: rockchip: Use PCI_NUM_INTX
  PCI: rockchip: Explicitly request exclusive reset control
  dt-bindings: phy-rockchip-pcie: Convert to per-lane PHY model
  dt-bindings: PCI: rockchip: Convert to per-lane PHY model
  arm64: dts: rockchip: convert PCIe to use per-lane PHYs for rk3339
  PCI: rockchip: Idle inactive PHY(s)
  phy: rockchip-pcie: Reconstruct driver to support per-lane PHYs
  PCI: rockchip: Add per-lane PHY support
  PCI: rockchip: Factor out rockchip_pcie_get_phys()
  PCI: rockchip: Control optional 12v power supply
  dt-bindings: PCI: rockchip: Add vpcie12v-supply for Rockchip PCIe controller

* pci/host-rcar:
  PCI: rcar: Add device tree support for r8a7743/5
  PCI: rcar: Fix memory leak when no PCIe card is inserted
  PCI: rcar: Fix error exit path

* pci/host-qcom:
  PCI: qcom: Add support for IPQ8074 PCIe controller
  dt-bindings: PCI: qcom: Add support for IPQ8074
  PCI: qcom: Use block IP version for operations
  PCI: qcom: Explicitly request exclusive reset control
  PCI: qcom: Use gpiod_set_value_cansleep() to allow reset via expanders

* pci/host-mvebu:
  PCI: mvebu: Remove unneeded gpiod NULL check

* pci/host-mediatek:
  PCI: mediatek: Use PCI_NUM_INTX
  PCI: mediatek: Add MSI support for MT2712 and MT7622
  PCI: mediatek: Use bus->sysdata to get host private data
  dt-bindings: PCI: Add support for MT2712 and MT7622
  PCI: mediatek: Add controller support for MT2712 and MT7622
  dt-bindings: PCI: Cleanup MediaTek binding text
  dt-bindings: PCI: Rename MediaTek binding
  PCI: mediatek: Switch to use platform_get_resource_byname()
  PCI: mediatek: Add a structure to abstract the controller generations
  PCI: mediatek: Rename port->index and mtk_pcie_parse_ports()
  PCI: mediatek: Use readl_poll_timeout() to wait for Gen2 training
  PCI: mediatek: Explicitly request exclusive reset control

* pci/host-layerscape:
  PCI: layerscape: Add support for ls1088a
  PCI: layerscape: Add support for ls2088a
  PCI: artpec6: Stop enabling writes to DBI read-only registers
  PCI: layerscape: Remove unnecessary class code fixup
  PCI: dwc: Enable write permission for Class Code, Interrupt Pin updates
  PCI: dwc: Add accessors for write permission of DBI read-only registers
  PCI: layerscape: Disable outbound windows configured by bootloader
  PCI: layerscape: Refactor ls1021_pcie_host_init()
  PCI: layerscape: Move generic init functions earlier in file
  PCI: layerscape: Add class code and multifunction fixups for ls1021a
  PCI: layerscape: Move STRFMR1 access out from the DBI write-enable bracket
  PCI: layerscape: Call dw_pcie_setup_rc() from ls_pcie_host_init()

* pci/host-kirin:
  PCI: kirin: Constify dw_pcie_host_ops structure

* pci/host-keystone:
  PCI: keystone: Use PCI_NUM_INTX
  PCI: keystone: Remove duplicate MAX_*_IRQS defs
  PCI: keystone-dw: Remove unused ks_pcie, pci variables

* pci/host-iproc:
  PCI: iproc: Clean up whitespace
  PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP
  PCI: iproc: Add 500ms delay during device shutdown
  PCI: iproc: Work around Stingray CRS defects
  PCI: iproc: Factor out memory-mapped config access address calculation
  PCI: iproc: Remove unused struct iproc_pcie *pcie

* pci/host-imx6:
  PCI: imx6: Explicitly request exclusive reset control

* pci/host-hv:
  PCI: hv: Do not sleep in compose_msi_msg()

* pci/host-hisi:
  PCI: hisi: Constify dw_pcie_host_ops structure
  PCI: hisi: Remove unused variable driver

* pci/host-faraday:
  PCI: faraday: Use PCI_NUM_INTX
  PCI: faraday: Fix of_irq_get() error check

* pci/host-exynos:
  PCI: exynos: Fix platform_get_irq() error handling

* pci/host-dra7xx:
  PCI: dra7xx: Fix platform_get_irq() error handling
  PCI: dra7xx: Propagate platform_get_irq() errors in dra7xx_pcie_probe()
  PCI: dra7xx: Use PCI_NUM_INTX

* pci/host-designware:
  PCI: dwc: Clear MSI interrupt status after it is handled, not before
  PCI: qcom: Allow ->post_init() to fail
  PCI: qcom: Don't unroll init if ->init() fails
  PCI: dwc: designware: Handle ->host_init() failures
  PCI: dwc: designware: Test PCIE_ATU_ENABLE bit specifically
  PCI: dwc: designware: Make dw_pcie_prog_*_atu_unroll() static

* pci/host-artpec6:
  PCI: artpec6: Fix platform_get_irq() error handling

* pci/host-armada:
  PCI: armada8k: Fix platform_get_irq() error handling
  PCI: armada8k: Check the return value from clk_prepare_enable()

* pci/host-altera:
  PCI: altera: Fix platform_get_irq() error handling
  PCI: altera: Use size=4 IRQ domain for legacy INTx
  PCI: altera: Remove unused num_of_vectors variable

* pci/host-aardvark:
  PCI: aardvark: Use PCI_NUM_INTX

* pci/irq-intx:
  PCI: Add pci_irqd_intx_xlate()
  PCI: Move enum pci_interrupt_pin to linux/pci.h

Use tabs (not spaces) for indentation.  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Apparently the PCIe capability is at address 0x40 in config space of X-Gene
v1 Root Ports.  Add a definition of that and use the generic PCI_EXP_RTCTL
offset into the capability.  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

When platform_get_irq() fails we should propagate the real error value
instead of always returning -EINVAL.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Duc Dang <dhdang@apm.com>

When platform_get_irq() fails we should propagate the real error value
instead of always returning -EINVAL.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>

When platform_get_irq() fails we should propagate the real error value
instead of always returning -EINVAL.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ley Foon Tan <lftan@altera.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>