- 23 Sep, 2021 32 commits
-
-
Aric Cyr authored
Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Anthony Koo authored
Acked-by:
Anthony Koo <Anthony.Koo@amd.com> Signed-off-by:
-
Qingqing Zhuo authored
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans under 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enablement, causing DMUB to access an irresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off when there is any HPD status in connected state for dcn20. Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
-
Harry Wentland authored
[Why & How] With Werror enabled in the kernel we were failing the clang build since dml21_ModeSupportAndSystemConfigurationFull's stack frame is 1064 when building with clang, and exceeding the default 1024 stack frame limit. The culprit seems to be the Pipe struct, so pull the relevant block out into its own sub-function. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Harry Wentland authored
[Why & How] dcn_bw_calc_rq_dlg_ttu uses a stack frame great than 1024. To solve this we could allocate the rq_param, dlg_sys_param, and input structs dynamically. Since this function is inside a kernel_fpu_begin()/end() call we want to avoid memory allocation. Instead it's much safer to pre-allocate these on the pipe_ctx. Signed-off-by:
Christian König <christian.koenig@amd.com> Build-tested-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
-
Harry Wentland authored
Passing structs adds a lot of overhead. We don't ever want to pass anything bigger than primitives by value. This patch fixes these Coverity IDs: Addresses-Coverity-ID: 1424031: ("Big parameter passed by value") Addresses-Coverity-ID: 1424055: ("Big parameter passed by value") Addresses-Coverity-ID: 1424072: ("Big parameter passed by value") Addresses-Coverity-ID: 1423779: ("Big parameter passed by value") Signed-off-by: -
Harry Wentland authored
Passing structs adds a lot of overhead. We don't ever want to pass anything bigger than primitives by value. This patch fixes these Coverity IDs: Addresses-Coverity-ID: 1423868: ("Big parameter passed by value") Addresses-Coverity-ID: 1423870: ("Big parameter passed by value") Signed-off-by: -
Harry Wentland authored
[Why] This neither needs to be on the stack nor passed by value to each function call. In fact, when building with clang it seems to break the Linux's default 1024 byte stack frame limit. [How] We can simply pass this as a const pointer. This patch fixes these Coverity IDs Addresses-Coverity-ID: 1424031: ("Big parameter passed by value") Addresses-Coverity-ID: 1423970: ("Big parameter passed by value") Addresses-Coverity-ID: 1423941: ("Big parameter passed by value") Addresses-Coverity-ID: 1451742: ("Big parameter passed by value") Addresses-Coverity-ID: 1451887: ("Big parameter passed by value") Addresses-Coverity-ID: 1454146: ("Big parameter passed by value") Addresses-Coverity-ID: 1454152: ("Big parameter passed by value") Addresses-Coverity-ID: 1454413: ("Big parameter passed by value") Addresses-Coverity-ID: 1466144: ("Big parameter passed by value") Addresses-Coverity-ID: 1487237: ("Big parameter passed by value") Signed-off-by: -
Philip Yang authored
For xnack off, restore work dma unmap previous system memory page, and dma map the updated system memory page to update GPU mapping, this is not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking. prange->dma_addr store the VRAM page pfn after the range migrated to VRAM, should not dma unmap VRAM page when updating GPU mapping or remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM page and error cases. Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again immediately after. This flag is used to know the type of page later to dma unmapping system memory page. Fixes: 1d5dbfe6 ("drm/amdkfd: classify and map mixed svm range pages in GPU") Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Philip Yang authored
SVM range may includes multiple VMAs with different vm_flags, if prange page index is the last page of the VMA offset + npages, update GPU mapping to create GPU page table with same VMA access permission. Signed-off-by:
-
Alex Deucher authored
Fix the path to cover both the older powerplay infrastructure and the newer SwSMU infrastructure. Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Arnd Bergmann authored
Using an empty macro expansion as a conditional expression produces a W=1 warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries': drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER"); | ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK"); | ^ Expand it to "do { } while (0)" instead to make the expression more robust and avoid the warning. Fixes: 56aca230 ("drm/amd/display: Add AUX I2C tracing.") Signed-off-by: -
Andrey Grodzovsky authored
Problem: When device goes into suspend and unplugged during it then all HW programming during resume fails leading to a bad SW during pci remove handling which follows. Because device is first resumed and only later removed we cannot rely on drm_dev_enter/exit here. Fix: Use a flag we use for PCIe error recovery to avoid accessing registres. This allows to successfully complete pm resume sequence and finish pci remove. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
-
Andrey Grodzovsky authored
Add more guards to MMIO access post device unbind/unplug Bug: https://bugs.archlinux.org/task/72092?project=1&order=dateopened&sort=desc&pagenum=1Signed-off-by:
James Zhu <James.Zhu@amd.com> Signed-off-by:
-
Andrey Grodzovsky authored
Crash: BUG: unable to handle page fault for address: 00000000000010e1 RIP: 0010:vega10_power_gate_vce+0x26/0x50 [amdgpu] Call Trace: pp_set_powergating_by_smu+0x16a/0x2b0 [amdgpu] amdgpu_dpm_set_powergating_by_smu+0x92/0xf0 [amdgpu] amdgpu_dpm_enable_vce+0x2e/0xc0 [amdgpu] vce_v4_0_hw_fini+0x95/0xa0 [amdgpu] amdgpu_device_fini_hw+0x232/0x30d [amdgpu] amdgpu_driver_unload_kms+0x5c/0x80 [amdgpu] amdgpu_pci_remove+0x27/0x40 [amdgpu] pci_device_remove+0x3e/0xb0 device_release_driver_internal+0x103/0x1d0 device_release_driver+0x12/0x20 pci_stop_bus_device+0x79/0xa0 pci_stop_and_remove_bus_device_locked+0x1b/0x30 remove_store+0x7b/0x90 dev_attr_store+0x17/0x30 sysfs_kf_write+0x4b/0x60 kernfs_fop_write_iter+0x151/0x1e0 Why: VCE/UVD had dependency on SMC block for their suspend but SMC block is the first to do HW fini due to some constraints How: Since the original patch was dealing with suspend issues move the SMC block dependency back into suspend hooks as was done in V1 of the original patches. Keep flushing idle work both in suspend and HW fini seuqnces since it's essential in both cases. Fixes: 859e4659 ("drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend") Fixes: bf756fb8 ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend") Signed-off-by:
-
xinhui pan authored
Now we use same BO for create/destroy msg. So destroy will wait for the fence returned from create to be signaled. The default timeout value in destroy is 10ms which is too short. Lets wait both fences with the specific timeout. Signed-off-by:
xinhui pan <xinhui.pan@amd.com> Reviewed-by:
-
xinhui pan authored
We hit soft hang while doing memory pressure test on one numa system. After a qucik look, this is because kfd invalid/valid userptr memory frequently with process_info lock hold. Looks like update page table mapping use too much cpu time. perf top says below, 75.81% [kernel] [k] __srcu_read_unlock 6.19% [amdgpu] [k] amdgpu_gmc_set_pte_pde 3.56% [kernel] [k] __srcu_read_lock 2.20% [amdgpu] [k] amdgpu_vm_cpu_update 2.20% [kernel] [k] __sg_page_iter_dma_next 2.15% [drm] [k] drm_dev_enter 1.70% [drm] [k] drm_prime_sg_to_dma_addr_array 1.18% [kernel] [k] __sg_alloc_table_from_pages 1.09% [drm] [k] drm_dev_exit So move drm_dev_enter/exit outside gmc code, instead let caller do it. They are gart_unbind, gart_map, vm_clear_bo, vm_update_pdes and gmc_init_pdb0. vm_bo_update_mapping already calls it. Signed-off-by:
-
Andrey Grodzovsky authored
Why: DC core is being released from DM before it's referenced from hpd_rx wq destruction code. How: Move hpd_rx destruction before DC core destruction. Signed-off-by:
-
Joshua Ashton authored
Some games, ie. Doom Eternal, present from compute following compute post-fx and would benefit from having DCC image stores available. DCN on gfx10_3 doesn't need INDEPENDENT_128B_BLOCKS = 0 so we can expose these modifiers capable of DCC image stores. Signed-off-by:
Joshua Ashton <joshua@froggi.es> Reviewed-by:
Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Acked-by:
-
Joshua Ashton authored
Adds the missing logic to set the correct value of dcc_ind_blk for this tiling version. Signed-off-by:
-
Joshua Ashton authored
We don't need to do this workaround if we start setting this value when we fill the plane attributes. Acked-by:
-
Colin Ian King authored
Don't populate the read-only array encoded_lanes on the stack but instead it static. Also makes the object code smaller by 97 bytes: Before: text data bss dec hex filename 38899 8064 0 46963 b773 ./drivers/gpu/drm/radeon/r600_dpm.o After: text data bss dec hex filename 38738 8128 0 46866 b712 ./drivers/gpu/drm/radeon/r600_dpm.o (gcc version 11.2.0) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
John Clements authored
Set correct RAS nBIF error query register offsets on aldebaran Signed-off-by:
John Clements <john.clements@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Candice Li authored
Update PSP TA unload function to use PSP TA context as input argument. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
-
Candice Li authored
Update asd_context structure and add asd_initialize function to conform ASD header/loading to generic TA systems. Signed-off-by:
-
Alex Deucher authored
Was missing. Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] The "base_addr_is_mc_addr" field was added for dcn3.1 support but pa_config was never updated to set it to false. Uninitialized memory causes it to be set to true which results in address mistranslation and white screen. [How] Use memset to ensure all fields are initialized to 0 by default. Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ") Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Aaron Liu <aaron.liu@amd.com> Reviewed-by:
-
Simon Ser authored
This patch allows panel orientation quirks from DRM core to be used. They attach a DRM connector property "panel orientation" which indicates in which direction the panel has been mounted. Some machines have the internal screen mounted with a rotation. Since the panel orientation quirks need the native mode from the EDID, check for it in amdgpu_dm_connector_ddc_get_modes. Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
-
Paul Menzel authored
As the user cannot do anything about the unsupported Trusted Memory Zone (TMZ) feature, do not warn about it, but make it informational, so demote the log level from warning to info. Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Michel Dänzer authored
This was unusual; normally, inline functions are declared static as well, and defined in a header file if used by multiple compilation units. The latter would be more involved in this case, so just drop the inline declaration for now. Fixes compile failure building for ppc64le on RHEL 8: In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h:32, from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:33: ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_recovery_init’: ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:90:17: error: inlining failed in call to ‘always_inline’ ‘amdgpu_ras_eeprom_max_record_count’: function body not available 90 | inline uint32_t amdgpu_ras_eeprom_max_record_count(void); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1985:34: note: called from here 1985 | max_eeprom_records_len = amdgpu_ras_eeprom_max_record_count(); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: c84d4670 "drm/amdgpu: validate bad page threshold in ras(v3)" Reviewed-by:Lyude Paul <lyude@redhat.com> Signed-off-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
-
Nirmoy Das authored
Pass drm dev directly as rdev->ddev gets initialized later on at radeon_device_init(). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214375Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
Evan Quan authored
Current RUNPM mechanism relies on PMFW to master the timing for BACO in/exit. And that needs cooperation from sound driver for dstate change notification for function 1(audio). Otherwise(on sound driver missing), BACO cannot be kicked in correctly and hang will be observed on RUNPM exit. By switching back to legacy message way on sound driver missing, we are able to fix the runpm hang observed for the scenario below: amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded Signed-off-by:
Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
- 14 Sep, 2021 8 commits
-
-
xinhui pan authored
Direct IB submission should be exclusive. So use write lock. Signed-off-by:
-
xinhui pan authored
alloc extra msg from direct IB pool. Signed-off-by:
-
xinhui pan authored
alloc extra msg from direct IB pool. Signed-off-by:
-
xinhui pan authored
move BO allocation in sw_init. Signed-off-by:
-
Candice Li authored
Remove all TA binary structures and add the specific binary structure in struct ta_context. Signed-off-by:
-
James Zhu authored
Separate iommu_resume from kfd_resume, and move it before other amdgpu ip init/resume. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by:
-
James Zhu authored
Add amdgpu_amdkfd_resume_iommu for amdgpu. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by:
-
James Zhu authored
Separate kfd_iommu_resume from kfd_resume for fine-tuning of amdgpu device init/resume/reset/recovery sequence. v2: squash in fix for !CONFIG_HSA_AMD Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by:
-
