- 11 Jul, 2004 1 commit
-
-
Andrew Morton authored
From: Mika Kukkonen <mika@osdl.org> CC [M] drivers/block/cciss.o In file included from drivers/scsi/scsi.h:27, from drivers/block/cciss_scsi.c:31, from drivers/block/cciss.c:188: include/scsi/scsi_device.h:191: warning: `inline' is not at beginning of declaration Another case of reordering the 'inline' and function return value. Signed-off-by:Andrew Morton <akpm@osdl.org> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
- 10 Jul, 2004 7 commits
-
-
Adrian Bunk authored
If you send an email to linux-megaraid-devel@dell.com, you get an automated response to send the mail to linux-scsi@vger.kernel.org instead. The patch below updates megaraid.c accordingly. Signed-off-by:
Adrian Bunk <bunk@fs.tum.de> Signed-off-by:
-
Guennadi Liakhovetski authored
> Short: The attached patch fixes the bug-report #2139 from kernel bugzilla. I wasn't quite convenient with the previous version of the patch, but I just wanted to get it working at first and get some comments as to whether the approach (put a workaround vs. blacklisting) is at all valid. Since no objections arrived, I guess, nobody minds this small trick. So, I am enclosing a reworked patch, which does essentially the same, but has some more careful checking, and overall looks saner, than the previous one. Signed-off-by: -
Andrew Morton authored
drivers/message/fusion/mptbase.c: In function `GetIocFacts': drivers/message/fusion/mptbase.c:2420: warning: int format, different type arg (arg 4) Signed-off-by:
-
James Bottomley authored
From: "Moore, Eric Dean" <Emoore@lsil.com> This driver incorporates the patches from Christoph Hellwig and Masao Fukuchi. Changelog of this release: * Patch provided by Masao Fukuchi [fukuchi.masao@jp.fujitsu.com] - mptctl updates for hot plug * Patch provided by Christoph Hellwig [hch@infradead.org] - mptlan updates for hot plug - remove CONFIG_LBD ifdefs from fusion { mptscsih.c} Signed-off-by: -
Brian King authored
The following patch fixes an oops I was seeing on a machine with misconfigured scsi cables, but could feasibly happen in other paths. The oops was occurring because scsi_remove_device was getting called for a device before scsi_add_device had fully completed. This resulted in sysfs_remove_link being called with a NULL dentry. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
-
Mark Haverkamp authored
This restores a fix to the aacraid reset handler. It makes sure that there are no active commands on any attached device before exiting with SUCCESS. Signed-off-by:
Mark Haverkamp <markh@osdl.org> Signed-off-by:
-
Randy Dunlap authored
Use correct config symbol name for MACH_JAZZ in JAZZ_ESP driver config. Acked by Ralf. Signed-off-by:
Randy Dunlap <rddunlap@osdl.org> Signed-off-by:
-
- 28 Jun, 2004 6 commits
-
-
Christoph Hellwig authored
Signed-off-by:
Jes Sorensen <jes@wildopensource.com> Signed-off-by:
-
Christoph Hellwig authored
no function changes, just some more gotos and less nested ifs to make the code readable. Signed-off-by:
-
Christoph Hellwig authored
qla1280_nvram_config is a huge mess. Split it up into managable subroutines and add suport for the ISP1040 to it. Add missing call to set the age limit also on 1280/1x160. Signed-off-by:
-
Christoph Hellwig authored
The ISP1040 needs to load firmware by PIO, and while we're at it clean the convoluted mess of firmware loading up by splitting it into managable subroutines. Signed-off-by:
-
Christoph Hellwig authored
The code is already messy due to the explicit pci id checks for 1280 vs 1x160, so add some nice helpers for that. Signed-off-by:
-
Christoph Hellwig authored
The old 1020/1040 has some registers where the newer controlers only have reserved space, add that to qla1280.h Signed-off-by:
-
- 27 Jun, 2004 26 commits
-
-
Andries E. Brouwer authored
CAP_DAC_OVERRIDE fails to give search permission in a directory with mode 0. Patch acked by Chris Wright <chrisw@osdl.org> Signed-off-by:
Andries Brouwer <aeb@cwi.nl> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Alexey Dobriyan authored
There's no reason to keep files that a) nobody #include's b) produce #error Signed-off-by:
-
Andy Whitcroft authored
For each node there are a defined list of MAX_NR_ZONES zones. These are selected as a result of the __GFP_DMA and __GFP_HIGHMEM zone modifier flags being passed to the memory allocator as part of the GFP mask. Each node has a set of zone lists, node_zonelists, which defines the list and order of zones to scan for each flag combination. When initialising these lists we iterate over modifier combinations 0 .. MAX_NR_ZONES. However, this is only correct when there are at most ZONES_SHIFT flags. If another flag is introduced zonelists for it would not be initialised. This patch introduces GFP_ZONETYPES (based on GFP_ZONEMASK) as a bound for the number of modifier combinations. Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Alan Cox authored
Like a few other drivers the vc driver is doing unlocked careless references to file offsets. Its got kind of 2.2 locking that hasnt been updated in the lseek function so someone at least tried. Fortunately we have a real lock for this and can just make lseek use that too. The 'assume 64bit load is atomic' bug seems to be very widely spread akpm@osdl.org: Move declarations to vt_kern.h Signed-off-by:
-
David Eger authored
Here's the accel capabilities patch for radeonfb. It updates radeonfb to advertise its acceleration capabilities via fbinfo.flags. I've tested this on my box, and it gives me a nice fast console. defect: "$ fbset -accel 0" doesn't work for radeonfb -- disabling accel will only work from the kernel command line :-/ Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
David Eger <eger@havoc.gtf.org> Signed-off-by:
-
Zwane Mwaikambo authored
This has been reported a couple of times and is consistently causing some folks grief, so Urban, would you mind terribly if i send this patch to at least clear current bug reports. If there is additional stuff you want ontop of this let me know and i can send a follow up patch. The bug is that at times we haven't completed setting up the smb_ops so we have a temporary 'null' ops in place until the connection is completely up. With this setup it's possible to hit ->readdir() whilst the null ops are still in place, so we put the process to sleep until the connection setup is complete and then call the real ->readdir(). This patch addresses the bugzilla report at http://bugzilla.kernel.org/show_bug.cgi?id=1671Signed-off-by:
Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by:
-
Andrew Morton authored
- Fix the !CONFIG_FRAME_POINTER && !CONFIG_KALLSYMS output formatting. - Make print_context_stack() static Signed-off-by:
-
Andy Whitcroft authored
If a fault in the kernel leads to an unexpected protection fault whilst in a code path which holds mmap_sem we will deadlock in do_page_fault() while trying to classify the fault. By carefully testing the source of the fault we can detect and OOPS on the vast majority of these, greatly enhancing diagnosis of such bugs. Signed-off-by:
-
Joseph Fannin authored
We need setup.h for COMMAND_LINE_SIZE. Signed-off-by:
Joseph Fannin <jhf@rivenstone.net> Signed-off-by:
-
Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
David S. Miller authored
A microsecond is 1 millionth of a second not 1 thousandth of a second. Noticed by Markus Mottl <markus@oefai.at> Signed-off-by:David S. Miller <davem@redhat.com>
-
Adrian Bunk authored
Signed-off-by:
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/net-2.6
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/sparc-2.6
-
David S. Miller authored
Also uninline pfn_to_page and page_to_pfn. Struct page is now 8 bytes smaller.
-
Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Stephen Rothwell authored
Jeremy Katz of Red Hat reported that his iSeries machine would not boot with 2.6.7 based kernels. It appears that with the inclusion of Paul Mackerras' patch "Optimize exception/syscall entry/exit" a small previous patch got reverted. Here is that patch again. The lack of this patch does not stop all iSeries machines booting, but it does stop some. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Andrew Morton authored
affs is failing to propagate the inode_setattr() return value. Signed-off-by:
-
Andrew Morton authored
ncpfs is failing to propagate the inode_setattr return value. Signed-off-by:
-
Andrew Morton authored
CIFS is failing to propagate the inode_setattr() return value. Signed-off-by:
-
Andrew Morton authored
jfs is dropping inode_setattr()'s return value. Signed-off-by:
-
Andrew Morton authored
reiserfs() is also dropping inode_setattr() retvals on the floor. Signed-off-by:
-
Andrew Morton authored
ext2_setattr() drops the inode_setattr() return value on the floor. This is very bad - I/O errors during truncate are lost. The patch changes ext2_setattr() so that we no longer call ext2_acl_chmod() if inode_setattr(), which is what ext3 does. Signed-off-by:
-
Hugh Dickins authored
We permanently hold the i_sem of swapfiles so that nobody can addidentally ftruncate them, causing subsequent filesystem destruction. Problem is, it's fairly easy for things like backup applications to get stuck onthe swapfile, sleeping until someone does a swapoff. So take all that out again and add a new S_SWAPFILE inode flag. Test that in the truncate path and refuse to truncate an in-use swapfile. Synchronisation between swapon and truncate is via i_sem. Signed-off-by:
-
Russell King authored
Rework the declaration, sizing and memcpying of saved_command_line[] so that ARM doesn't need to implement unwelcome header file nestings. Signed-off-by:
-
Andrew Morton authored
ext3_direct_io_get_blocks() is misinterpreting the return value from ext3_journal_extend(), and is consequently running out of buffer credits and going BUG on tremendously large direct-io writes. Fix that up. Also, I note that the really large direct-io writes can hold a transaction open for the entire duration, which can be minutes. This violates ext3's attempt to commit data at regular intervals. Fix that up by looking at the transaction state: if it's T_LOCKED, shut off the current handle so the pending commit can complete. Signed-off-by:
-
