- 13 Nov, 2014 5 commits
-
-
Wen-chien Jesse Sung authored
commit d90b1cf0 upstream. This device generates ABS_Z and ABS_RX events instead of ABS_X and ABS_Y. Signed-off-by:
Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Reyad Attiyat authored
commit 46df9ded upstream. Set disconnected flag in struct usbhid when a usb device is removed. Check for disconnected flag before sending urb requests. This prevents a kernel panic when a hid driver calls hid_hw_request() after removing a usb device. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 PGD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 2 PID: 39 Comm: khubd Tainted: G IO 3.16.0-rc5+ #112 Hardware name: Microsoft Corporation Surface Pro 2/Surface Pro 2, BIOS 2.03.0250 09/06/2013 task: ffff880118aba6e0 ti: ffff8800daf80000 task.ti: ffff8800daf80000 RIP: 0010:[<ffffffff8161746f>] [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 RSP: 0018:ffff8800daf83750 EFLAGS: 00010086 RAX: 0000000080000300 RBX: ffff88003f60c000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880117f78000 RBP: ffff8800daf83788 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880117f78000 R13: ffff88003f11a290 R14: 000000000000000c R15: ffff880091cb3ab8 FS: 0000000000000000(0000) GS:ffff88011b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000001c11000 CR4: 00000000001407e0 Stack: ffff880117f3dcd0 ffff880117f78000 ffff88003f60c000 ffff880117f78000 ffff880117f78000 ffff88003f11a290 0000000000000000 ffff8800daf837b0 ffffffff81617707 ffff880117f78000 ffff88003f60c000 0000000000000013 Call Trace: [<ffffffff81617707>] usbhid_restart_ctrl_queue+0x87/0x140 [<ffffffff81617a88>] usbhid_submit_report+0x2c8/0x370 [<ffffffff81617b4a>] usbhid_request+0x1a/0x30 [<ffffffffa020edfb>] sensor_hub_set_feature+0x8b/0xd0 [hid_sensor_hub] [<ffffffffa02d9084>] hid_sensor_power_state+0x84/0x110 [hid_sensor_trigger] [<ffffffffa02d9129>] hid_sensor_data_rdy_trigger_set_state+0x19/0x20 [hid_sensor_trigger] [<ffffffffa034d5b7>] iio_triggered_buffer_predisable+0xa7/0xb0 [industrialio] [<ffffffffa034cc4a>] iio_disable_all_buffers+0x3a/0xc0 [industrialio] [<ffffffffa03487d3>] iio_device_unregister+0x53/0x80 [industrialio] [<ffffffffa026c06a>] hid_accel_3d_remove+0x2a/0x50 [hid_sensor_accel_3d] [<ffffffff814f433d>] platform_drv_remove+0x1d/0x40 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81512190>] ? mfd_cell_disable+0x80/0x80 [<ffffffff814f41d1>] platform_device_del+0x21/0xc0 [<ffffffff814f4282>] platform_device_unregister+0x12/0x30 [<ffffffff815121d3>] mfd_remove_devices_fn+0x43/0x50 [<ffffffff814ed3e3>] device_for_each_child+0x43/0x70 [<ffffffff81512105>] mfd_remove_devices+0x25/0x30 [<ffffffffa020ebd7>] sensor_hub_remove+0x87/0x140 [hid_sensor_hub] [<ffffffff81607c5b>] hid_device_remove+0x6b/0xd0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81607d47>] hid_destroy_device+0x27/0x60 [<ffffffff81616972>] usbhid_disconnect+0x22/0x50 [<ffffffff81568597>] usb_unbind_interface+0x77/0x2b0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81565cd1>] usb_disable_device+0x91/0x2a0 [<ffffffff8155b046>] usb_disconnect+0x96/0x2e0 [<ffffffff8155d74a>] hub_thread+0xb5a/0x1840 Signed-off-by:
Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by:
-
Sergio Gelato authored
Fix regression introduced in pre-3.14 kernels by cherry-picking aa07c713 (NFSD: Call ->set_acl with a NULL ACL structure if no entries). This is in v3.12.22 as commit 723ac81c. The affected code was removed in 3.14 by commit 4ac7249e (nfsd: use get_acl and ->set_acl). The ->set_acl methods are already able to cope with a NULL argument. So this is not needed for >= 3.14. Signed-off-by:
Sergio Gelato <Sergio.Gelato@astro.su.se> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit de11b0e8 ] These drivers now call ipv6_proxy_select_ident(), which is defined only if CONFIG_INET is enabled. However, they have really depended on CONFIG_INET for as long as they have allowed sending GSO packets from userland. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: f43798c2 ("tun: Allow GSO using virtio_net_hdr") Fixes: b9fb9ee0 ("macvtap: add GSO/csum offload support") Fixes: 5188cd44 ("drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
[ Upstream commit 5188cd44 ] UFO is now disabled on all drivers that work with virtio net headers, but userland may try to send UFO/IPv6 packets anyway. Instead of sending with ID=0, we should select identifiers on their behalf (as we used to). Signed-off-by:
-
- 05 Nov, 2014 13 commits
-
-
Vasily Averin authored
[ Upstream commit 4062090e ] ip_setup_cork() called inside ip_append_data() steals dst entry from rt to cork and in case errors in __ip_append_data() nobody frees stolen dst entry Fixes: 2e77d89b ("net: avoid a pair of dst_hold()/dst_release() in ip_append_data()") Signed-off-by:
Vasily Averin <vvs@parallels.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 349ce993 ] percpu tcp_md5sig_pool contains memory blobs that ultimately go through sg_set_buf(). -> sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); This requires that whole area is in a physically contiguous portion of memory. And that @buf is not backed by vmalloc(). Given that alloc_percpu() can use vmalloc() areas, this does not fit the requirements. Replace alloc_percpu() by a static DEFINE_PER_CPU() as tcp_md5sig_pool is small anyway, there is no gain to dynamically allocate it. Signed-off-by:
Crestez Dan Leonard <cdleonard@gmail.com> Signed-off-by:
-
Ian Morgan authored
[ Upstream commit 95ff8868 ] The following patch fixes a bug which causes the ax88179_178a driver to be incapable of being added to a bond. When I brought up the issue with the bonding maintainers, they indicated that the real problem was with the NIC driver which must return zero for success (of setting the MAC address). I see that several other NIC drivers follow that pattern by either simply always returing zero, or by passing through a negative (error) result while rewriting any positive return code to zero. With that same philisophy applied to the ax88179_178a driver, it allows it to work correctly with the bonding driver. I believe this is suitable for queuing in -stable, as it's a small, simple, and obvious fix that corrects a defect with no other known workaround. This patch is against vanilla 3.17(.0). Signed-off-by:
Ian Morgan <imorgan@primordial.ca> drivers/net/usb/ax88179_178a.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) Signed-off-by:
-
Li RongQing authored
[ Upstream commit 1245dfc8 ] pskb_may_pull() maybe change skb->data and make eth pointer oboslete, so set eth after pskb_may_pull() Fixes:3d7b46cd("ip_tunnel: push generic protocol handling to ip_tunnel module") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 7a9f526f ] pskb_may_pull maybe change skb->data and make eth pointer oboslete, so eth needs to reload Fixes: 91269e39 ("vxlan: using pskb_may_pull as early as possible") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 91269e39 ] pskb_may_pull should be used to check if skb->data has enough space, skb->len can not ensure that. Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit ce6502a8 ] when netif_rx() is done, the netif_rx handled skb maybe be freed, and should not be used. Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit f76936d0 ] fib_nh_match does not match nexthops correctly. Example: ip route add 172.16.10/24 nexthop via 192.168.122.12 dev eth0 \ nexthop via 192.168.122.13 dev eth0 ip route del 172.16.10/24 nexthop via 192.168.122.14 dev eth0 \ nexthop via 192.168.122.15 dev eth0 Del command is successful and route is removed. After this patch applied, the route is correctly matched and result is: RTNETLINK answers: No such process Please consider this for stable trees as well. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
-
Mengdong Lin authored
commit e4d9e513 upstream. For HSW/BDW display HD-A controller, hda_set_bclk() is defined to set BCLK by programming the M/N values as per the core display clock (CDCLK) queried from i915 display driver. And the audio driver will also set BCLK in azx_first_init() since the display driver can turn off the shared power in boot phase if only eDP is connected and M/N values will be lost and must be reprogrammed. Signed-off-by:
Mengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jani Nikula authored
commit c149dcb5 upstream. For Haswell and Broadwell, if the display power well has been disabled, the display audio controller divider values EM4 M VALUE and EM5 N VALUE will have been lost. The CDCLK frequency is required for reprogramming them to generate 24MHz HD-A link BCLK. So provide a private interface for the audio driver to query CDCLK. This is a stopgap solution until a more generic interface between audio and display drivers has been implemented. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 74b0c2d7 upstream. When a machine is booted with nomodeset option, i915 driver skips the whole initialization. Meanwhile, HD-audio tries to bind wth i915 just by request_symbol() without knowing that the initialization was skipped, and eventually it hits WARN_ON() in i915_request_power_well() and i915_release_power_well() wrongly but still continues probing, even though it doesn't work at all. In this patch, both functions are changed to return an error in case of uninitialized state instead of WARN_ON(), so that HD-audio driver can give up HDMI controller initialization at the right time. Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> [3.15] Signed-off-by:
-
Lv Zheng authored
commit 79149001 upstream. It is reported that Samsung laptops that need to poll events are broken by the following commit: Commit 3afcf2ec Subject: ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set The behaviors of the 2 vendor firmwares are conflict: 1. Acer: OSPM shouldn't issue QR_EC unless SCI_EVT is set, firmware automatically sets SCI_EVT as long as there is event queued up. 2. Samsung: OSPM should issue QR_EC whatever SCI_EVT is set, firmware returns 0 when there is no event queued up. This patch is a quick fix to distinguish the behaviors to make Acer behavior only effective for Acer EC firmware so that the breakages on Samsung EC firmware can be avoided. Fixes: 3afcf2ec (ACPI / EC: Add support to disallow QR_EC to be issued ...) Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161Reported-and-tested-by:
Ortwin Glück <odi@odi.ch> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Cc: 3.17+ <stable@vger.kernel.org> # 3.17+ [ rjw : Subject ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lv Zheng authored
commit 3afcf2ec upstream. There is a platform refusing to respond QR_EC when SCI_EVT isn't set (Acer Aspire V5-573G). Currently, we rely on the behaviour that the EC firmware can respond something (for example, 0x00 to indicate "no outstanding events") to QR_EC even when SCI_EVT is not set, but the reporter has complained about AC/battery pluging/unpluging and video brightness change delay on that platform. This is because the work item that has issued QR_EC has to wait until timeout in this case, and the _Qxx method evaluation work item queued after QR_EC one is delayed. It sounds reasonable to fix this issue by: 1. Implementing SCI_EVT sanity check before issuing QR_EC in the EC driver's main state machine. 2. Moving QR_EC issuing out of the work queue used by _Qxx evaluation to a seperate IRQ handling thread. This patch fixes this issue using solution 1. By disallowing QR_EC to be issued when SCI_EVT isn't set, we are able to handle such platform in the EC driver's main state machine. This patch enhances the state machine in this way to survive with such malfunctioning EC firmware. Note that this patch can also fix CLEAR_ON_RESUME quirk which also relies on the assumption that the platforms are able to respond even when SCI_EVT isn't set. Fixes: c0d65341 ACPI / EC: Fix race condition in ec_transaction_completed() Link: https://bugzilla.kernel.org/show_bug.cgi?id=82611Reported-and-tested-by:
Alexander Mezin <mezin.alexander@gmail.com> Signed-off-by:
-
- 03 Nov, 2014 1 commit
-
-
Johannes Weiner authored
commit abe5f972 upstream. The zone allocation batches can easily underflow due to higher-order allocations or spills to remote nodes. On SMP that's fine, because underflows are expected from concurrency and dealt with by returning 0. But on UP, zone_page_state will just return a wrapped unsigned long, which will get past the <= 0 check and then consider the zone eligible until its watermarks are hit. Commit 3a025760 ("mm: page_alloc: spill to remote nodes before waking kswapd") already made the counter-resetting use atomic_long_read() to accomodate underflows from remote spills, but it didn't go all the way with it. Make it clear that these batches are expected to go negative regardless of concurrency, and use atomic_long_read() everywhere. Fixes: 81c0a2bb ("mm: page_alloc: fair zone allocator policy") Reported-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 31 Oct, 2014 21 commits
-
-
Jiri Slaby authored
-
Jan Kara authored
commit 7ba3ec57 upstream. Commit 8e3dffc6 "Ext2: mark inode dirty after the function dquot_free_block_nodirty is called" unveiled a bug in __ext2_get_block() called from ext2_get_xip_mem(). That function called ext2_get_block() mistakenly asking it to map 0 blocks while 1 was intended. Before the above mentioned commit things worked out fine by luck but after that commit we started returning that we allocated 0 blocks while we in fact allocated 1 block and thus allocation was looping until all blocks in the filesystem were exhausted. Fix the problem by properly asking for one block and also add assertion in ext2_get_blocks() to catch similar problems. Reported-and-tested-by:
Andiry Xu <andiry.xu@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Johannes Weiner authored
commit 2f7dd7a4 upstream. The cgroup iterators yield css objects that have not yet gone through css_online(), but they are not complete memcgs at this point and so the memcg iterators should not return them. Commit d8ad3055 ("mm/memcg: iteration skip memcgs not yet fully initialized") set out to implement exactly this, but it uses CSS_ONLINE, a cgroup-internal flag that does not meet the ordering requirements for memcg, and so the iterator may skip over initialized groups, or return partially initialized memcgs. The cgroup core can not reasonably provide a clear answer on whether the object around the css has been fully initialized, as that depends on controller-specific locking and lifetime rules. Thus, introduce a memcg-specific flag that is set after the memcg has been initialized in css_online(), and read before mem_cgroup_iter() callers access the memcg members. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Michael Ellerman authored
commit 78e05b14 upstream. Similar to the previous commit which described why we need to add a barrier to arch_spin_is_locked(), we have a similar problem with spin_unlock_wait(). We need a barrier on entry to ensure any spinlock we have previously taken is visibly locked prior to the load of lock->slock. It's also not clear if spin_unlock_wait() is intended to have ACQUIRE semantics. For now be conservative and add a barrier on exit to give it ACQUIRE semantics. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Michael Ellerman authored
commit 51d7d520 upstream. The kernel defines the function spin_is_locked(), which can be used to check if a spinlock is currently locked. Using spin_is_locked() on a lock you don't hold is obviously racy. That is, even though you may observe that the lock is unlocked, it may become locked at any time. There is (at least) one exception to that, which is if two locks are used as a pair, and the holder of each checks the status of the other before doing any update. Assuming *A and *B are two locks, and *COUNTER is a shared non-atomic value: The first CPU does: spin_lock(*A) if spin_is_locked(*B) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*A) And the second CPU does: spin_lock(*B) if spin_is_locked(*A) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*B) Although this is a strange locking construct, it should work. It seems to be understood, but not documented, that spin_is_locked() is not a memory barrier, so in the examples above and below the caller inserts its own memory barrier before acting on the result of spin_is_locked(). For now we assume spin_is_locked() is implemented as below, and we break it out in our examples: bool spin_is_locked(*LOCK) { LOAD l = *LOCK return l.locked } Our intuition is that there should be no problem even if the two code sequences run simultaneously such as: CPU 0 CPU 1 ================================================== spin_lock(*A) spin_lock(*B) LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) If one CPU gets the lock before the other then it will do the update and the other CPU will back off: CPU 0 CPU 1 ================================================== spin_lock(*A) LOAD b = *B spin_lock(*B) if b.locked # false LOAD a = *A else if a.locked # true smp_mb() # nothing LOAD r1 = *COUNTER spin_unlock(*B) r1++ STORE *COUNTER = r1 spin_unlock(*A) However in reality spin_lock() itself is not indivisible. On powerpc we implement it as a load-and-reserve and store-conditional. Ignoring the retry logic for the lost reservation case, it boils down to: spin_lock(*LOCK) { LOAD l = *LOCK l.locked = true STORE *LOCK = l ACQUIRE_BARRIER } The ACQUIRE_BARRIER is required to give spin_lock() ACQUIRE semantics as defined in memory-barriers.txt: This acts as a one-way permeable barrier. It guarantees that all memory operations after the ACQUIRE operation will appear to happen after the ACQUIRE operation with respect to the other components of the system. On modern powerpc systems we use lwsync for ACQUIRE_BARRIER. lwsync is also know as "lightweight sync", or "sync 1". As described in Power ISA v2.07 section B.2.1.1, in this scenario the lwsync is not the barrier itself. It instead causes the LOAD of *LOCK to act as the barrier, preventing any loads or stores in the locked region from occurring prior to the load of *LOCK. Whether this behaviour is in accordance with the definition of ACQUIRE semantics in memory-barriers.txt is open to discussion, we may switch to a different barrier in future. What this means in practice is that the following can occur: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true LOAD b = *B LOAD a = *A STORE *A = a STORE *B = b if b.locked # false if a.locked # false else else smp_mb() smp_mb() LOAD r1 = *COUNTER LOAD r2 = *COUNTER r1++ r2++ STORE *COUNTER = r1 STORE *COUNTER = r2 # Lost update spin_unlock(*A) spin_unlock(*B) That is, the load of *B can occur prior to the store that makes *A visibly locked. And similarly for CPU 1. The result is both CPUs hold their lock and believe the other lock is unlocked. The easiest fix for this is to add a full memory barrier to the start of spin_is_locked(), so adding to our previous definition would give us: bool spin_is_locked(*LOCK) { smp_mb() LOAD l = *LOCK return l.locked } The new barrier orders the store to the lock we are locking vs the load of the other lock: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true STORE *A = a STORE *B = b smp_mb() smp_mb() LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) Although the above example is theoretical, there is code similar to this example in sem_lock() in ipc/sem.c. This commit in addition to the next commit appears to be a fix for crashes we are seeing in that code where we believe this race happens in practice. Signed-off-by:
-
Ilya Dryomov authored
commit f9865f06 upstream. Commit f363e45f ("net/ceph: make ceph_msgr_wq non-reentrant") effectively removed WQ_MEM_RECLAIM flag from ceph_msgr_wq. This is wrong - libceph is very much a memory reclaim path, so restore it. Cc: stable@vger.kernel.org # needs backporting for < 3.12 Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Tested-by:
Micha Krause <micha@krausam.de> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Ezequiel Garcia authored
commit b478e336 upstream. The current error path calls tilcdc_unload() in case of an error to release the resources. However, this is wrong because not all resources have been allocated by the time an error occurs in tilcdc_load(). To fix it, this commit adds proper labels to bail out at the different stages in the load function, and release only the resources actually allocated. Tested-by:
Darren Etheridge <detheridge@ti.com> Tested-by:
Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Shen Guang authored
commit 08d1dec6 upstream. When we are doing compliance test with xHCI, we found that if we enable CONFIG_USB_SUSPEND and plug in a bad device which causes over-current condition to the root port, software will not be noticed. The reason is that current code don't set hub->change_bits in hub_activate() when over-current happens, and then hub_events() will not check the port status because it thinks nothing changed. If CONFIG_USB_SUSPEND is disabled, the interrupt pipe of the hub will report the change and set hub->event_bits, and then hub_events() will check what events happened.In this case over-current can be detected. Signed-off-by:
Shen Guang <shenguang10@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Pawel Moll authored
commit b3f20785 upstream. When running a 32-bit userspace on a 64-bit kernel (eg. i386 application on x86_64 kernel or 32-bit arm userspace on arm64 kernel) some of the perf ioctls must be treated with special care, as they have a pointer size encoded in the command. For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded as 0x80042407, but 64-bit kernel will expect 0x80082407. In result the ioctl will fail returning -ENOTTY. This patch solves the problem by adding code fixing up the size as compat_ioctl file operation. Reported-by:
Drew Richardson <drew.richardson@arm.com> Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1402671812-9078-1-git-send-email-pawel.moll@arm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Vince Weaver authored
commit 1996388e upstream. This was discussed back in February: https://lkml.org/lkml/2014/2/18/956 But I never saw a patch come out of it. On IvyBridge we share the SandyBridge cache event tables, but the dTLB-load-miss event is not compatible. Patch it up after the fact to the proper DTLB_LOAD_MISSES.DEMAND_LD_MISS_CAUSES_A_WALK Signed-off-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
-
Dave Chinner authored
commit 0d085a52 upstream. XFS has been having trouble with stray delayed allocation extents beyond EOF for a long time. Recent changes to the collapse range code has triggered erroneous EBUSY errors on page invalidtion for block size smaller than page size filesystems. These have been caused by dirty buffers beyond EOF on a partial page which do not get written to disk during a sync. The issue is that write-ahead in xfs_cluster_write() finds such a partial page and handles it by leaving the page dirty but pushing it into a writeback state. This used to work just fine, as the write_cache_pages() code would then find the dirty partial page in the next mapping tree lookup as the dirty tag is still set. Unfortunately, when we moved to a mark and sweep approach to writeback to fix other writeback sync issues, we broken this. THe act of marking the page as under writeback now clears the TOWRITE tag in the radix tree, even though the page is still dirty. This causes the TOWRITE tag to be cleared, and hence the next lookup on the mapping tree does not find the dirty partial page and so doesn't try to write it again. This same writeback bug was found recently in ext4 and fixed in commit 1c8349a1 ("ext4: fix data integrity sync in ordered mode") without communication to the wider filesystem community. We can use exactly the same fix here so the TOWRITE flag is not cleared on partial page writes. cc: stable@vger.kernel.org # dependent on 1c8349a1Root-cause-found-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Chao Yu authored
commit 35425ea2 upstream. Christopher Head 2014-06-28 05:26:20 UTC described: "I tried to reproduce this on 3.12.21. Instead, when I do "echo hello > foo" in an ecryptfs mount with ecryptfs_xattr specified, I get a kernel crash: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61 PGD d7840067 PUD b2c3c067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: nvidia(PO) CPU: 3 PID: 3566 Comm: bash Tainted: P O 3.12.21-gentoo-r1 #2 Hardware name: ASUSTek Computer Inc. G60JX/G60JX, BIOS 206 03/15/2010 task: ffff8801948944c0 ti: ffff8800bad70000 task.ti: ffff8800bad70000 RIP: 0010:[<ffffffff8110eb39>] [<ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61 RSP: 0018:ffff8800bad71c10 EFLAGS: 00010246 RAX: 00000000000181a4 RBX: ffff880198648480 RCX: 0000000000000000 RDX: 0000000000000004 RSI: ffff880172010450 RDI: 0000000000000000 RBP: ffff880198490e40 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880172010450 R11: ffffea0002c51e80 R12: 0000000000002000 R13: 000000000000001a R14: 0000000000000000 R15: ffff880198490e40 FS: 00007ff224caa700(0000) GS:ffff88019fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000bb07f000 CR4: 00000000000007e0 Stack: ffffffff811826e8 ffff8800a39d8000 0000000000000000 000000000000001a ffff8800a01d0000 ffff8800a39d8000 ffffffff81185fd5 ffffffff81082c2c 00000001a39d8000 53d0abbc98490e40 0000000000000037 ffff8800a39d8220 Call Trace: [<ffffffff811826e8>] ? ecryptfs_setxattr+0x40/0x52 [<ffffffff81185fd5>] ? ecryptfs_write_metadata+0x1b3/0x223 [<ffffffff81082c2c>] ? should_resched+0x5/0x23 [<ffffffff8118322b>] ? ecryptfs_initialize_file+0xaf/0xd4 [<ffffffff81183344>] ? ecryptfs_create+0xf4/0x142 [<ffffffff810f8c0d>] ? vfs_create+0x48/0x71 [<ffffffff810f9c86>] ? do_last.isra.68+0x559/0x952 [<ffffffff810f7ce7>] ? link_path_walk+0xbd/0x458 [<ffffffff810fa2a3>] ? path_openat+0x224/0x472 [<ffffffff810fa7bd>] ? do_filp_open+0x2b/0x6f [<ffffffff81103606>] ? __alloc_fd+0xd6/0xe7 [<ffffffff810ee6ab>] ? do_sys_open+0x65/0xe9 [<ffffffff8157d022>] ? system_call_fastpath+0x16/0x1b RIP [<ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61 RSP <ffff8800bad71c10> CR2: 0000000000000000 ---[ end trace df9dba5f1ddb8565 ]---" If we create a file when we mount with ecryptfs_xattr_metadata option, we will encounter a crash in this path: ->ecryptfs_create ->ecryptfs_initialize_file ->ecryptfs_write_metadata ->ecryptfs_write_metadata_to_xattr ->ecryptfs_setxattr ->fsstack_copy_attr_all It's because our dentry->d_inode used in fsstack_copy_attr_all is NULL, and it will be initialized when ecryptfs_initialize_file finish. So we should skip copying attr from lower inode when the value of ->d_inode is invalid. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Ludovic Desroches authored
commit cfa1950e upstream. When introducing support for sama5d3, the write to PMC_PCDR register has been accidentally removed. Reported-by:
Nathalie Cyrille <nathalie.cyrille@atmel.com> Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Andreas Henriksson authored
commit b65e0fb3 upstream. As discovered on a custom board similar to at91sam9263ek and basing its devicetree on that one apparently the pin muxing doesn't get set up properly. This was discovered since the custom boards u-boot does funky stuff with the pin muxing and leaved it set to SPI which made the MMC driver not work under Linux. The fix is simply to define the given configuration as the default. This probably worked by pure luck before, but it's better to make the muxing explicitly set. Signed-off-by:
Andreas Henriksson <andreas.henriksson@endian.se> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Anssi Hannula authored
commit 6acce400 upstream. The ELD ALSA control change event is sent by hdmi_present_sense() when eld_changed is true. Currently, it is only true when the ELD buffer contents have been modified. However, the user-visible ELD controls also change to a zero-length value and back when eld_valid is unset/set, and no event is currently sent in such cases (such as when unplugging or replugging a sink). Fix the code to always set eld_changed if eld_valid value is changed, and therefore to always send the change event when the user-visible value changes. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Vlad Catoi authored
commit f0b127fb upstream. Adding support for Steinberg UR22 USB interface via quirks table patch See Ubuntu bug report: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1317244 Also see threads: http://linux-audio.4202.n7.nabble.com/Support-for-Steinberg-UR22-Yamaha-USB-chipset-0499-1509-tc82888.html#a82917 http://www.steinberg.net/forums/viewtopic.php?t=62290 Tested by at least 4 people judging by the threads. Did not test MIDI interface, but audio output and capture both are functional. Built 3.17 kernel with this driver on Ubuntu 14.04 & tested with mpg123 Patch applied to 3.13 Ubuntu kernel works well enough for daily use. Signed-off-by:
Vlad Catoi <vladcatoi@gmail.com> Acked-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Harsha Priya authored
commit b450b17c upstream. This patch sets the headphones mode to default before suspending which helps avoid the pop noise on headphones Signed-off-by:
Harsha Priya <harshapriya.n@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 95926035 upstream. The emu10k1 voice allocator takes voice_lock spinlock. When there is no empty stream available, it tries to release a voice used by synth, and calls get_synth_voice. The callback function, snd_emu10k1_synth_get_voice(), however, also takes the voice_lock, thus it deadlocks. The fix is simply removing the voice_lock holds in snd_emu10k1_synth_get_voice(), as this is always called in the spinlock context. Reported-and-tested-by:
Arthur Marsh <arthur.marsh@internode.on.net> Signed-off-by:
-
Anatol Pomozov authored
commit a011e213 upstream. This avoids following kernel crash when try to playback on arm64 [ 107.497203] [<ffffffc00046b310>] snd_pcm_mmap_data_fault+0x90/0xd4 [ 107.503405] [<ffffffc0001541ac>] __do_fault+0xb0/0x498 [ 107.508565] [<ffffffc0001576a0>] handle_mm_fault+0x224/0x7b0 [ 107.514246] [<ffffffc000092640>] do_page_fault+0x11c/0x310 [ 107.519738] [<ffffffc000081100>] do_mem_abort+0x38/0x98 Tested: backported to 3.14 and tried to playback on arm64 machine Signed-off-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by:
-
Victor Kamensky authored
commit 971a5b6f upstream. The compat_elf_prpsinfo structure does not match the arch/arm struct elf_pspsinfo definition. As result NT_PRPSINFO note in core file created by arm64 kernel for aarch32 (compat) process has wrong size. So gdb cannot display command that caused process crash. Fix is to change size of __compat_uid_t, __compat_gid_t so it would match size of similar fields in arch/arm case. Signed-off-by:
Victor Kamensky <victor.kamensky@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Andy Shevchenko authored
commit 8e45ef68 upstream. Do full clean up at exit, means terminate all ongoing DMA transfers. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
