Added two test_verifier subtests for 32bit pointer/scalar arithmetic
with BPF_SUB operator. They are passing verifier now.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200618234632.3321367-1-yhs@fb.com

When do experiments with llvm (disabling instcombine and
simplifyCFG), I hit the following error with test_seg6_loop.o.

  ; R1=pkt(id=0,off=0,r=48,imm=0), R7=pkt(id=0,off=40,r=48,imm=0)
  w2 = w7
  ; R2_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
  w2 -= w1
  R2 32-bit pointer arithmetic prohibited

The corresponding source code is:
  uint32_t srh_off
  // srh and skb->data are all packet pointers
  srh_off = (char *)srh - (char *)(long)skb->data;

The verifier does not support 32-bit pointer/scalar arithmetic.

Without my llvm change, the code looks like

  ; R3=pkt(id=0,off=40,r=48,imm=0), R8=pkt(id=0,off=0,r=48,imm=0)
  w3 -= w8
  ; R3_w=inv(id=0)

This is explicitly allowed in verifier if both registers are
pointers and the opcode is BPF_SUB.

To fix this problem, I changed the verifier to allow
32-bit pointer/scaler BPF_SUB operations.

At the source level, the issue could be workarounded with
inline asm or changing "uint32_t srh_off" to "uint64_t srh_off".
But I feel that verifier change might be the right thing to do.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200618234631.3321118-1-yhs@fb.com

The cache_idx is currently picked by RR.  There is chance that
the same cache_idx will be picked by multiple sk_storage_maps while
other cache_idx is still unused.  e.g. It could happen when the
sk_storage_map is recreated during the restart of the user
space process.

This patch tracks the usage count for each cache_idx.  There is
16 of them now (defined in BPF_SK_STORAGE_CACHE_SIZE).
It will try to pick the free cache_idx.  If none was found,
it would pick one with the minimal usage count.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200617174226.2301909-1-kafai@fb.com

Bump libbpf version to 0.1.0, as new development cycle starts.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200617183132.1970836-1-andriin@fb.com

Pull networking fixes from David Miller:

 1) Don't get per-cpu pointer with preemption enabled in nft_set_pipapo,
    fix from Stefano Brivio.

 2) Fix memory leak in ctnetlink, from Pablo Neira Ayuso.

 3) Multiple definitions of MPTCP_PM_MAX_ADDR, from Geliang Tang.

 4) Accidently disabling NAPI in non-error paths of macb_open(), from
    Charles Keepax.

 5) Fix races between alx_stop and alx_remove, from Zekun Shen.

 6) We forget to re-enable SRIOV during resume in bnxt_en driver, from
    Michael Chan.

 7) Fix memory leak in ipv6_mc_destroy_dev(), from Wang Hai.

 8) rxtx stats use wrong index in mvpp2 driver, from Sven Auhagen.

 9) Fix memory leak in mptcp_subflow_create_socket error path, from Wei
    Yongjun.

10) We should not adjust the TCP window advertised when sending dup acks
    in non-SACK mode, because it won't be counted as a dup by the sender
    if the window size changes. From Eric Dumazet.

11) Destroy the right number of queues during remove in mvpp2 driver,
    from Sven Auhagen.

12) Various WOL and PM fixes to e1000 driver, from Chen Yu, Vaibhav
    Gupta, and Arnd Bergmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
  e1000e: fix unused-function warning
  e1000: use generic power management
  e1000e: Do not wake up the system via WOL if device wakeup is disabled
  lan743x: add MODULE_DEVICE_TABLE for module loading alias
  mlxsw: spectrum: Adjust headroom buffers for 8x ports
  bareudp: Fixed configuration to avoid having garbage values
  mvpp2: remove module bugfix
  tcp: grow window for OOO packets only for SACK flows
  mptcp: fix memory leak in mptcp_subflow_create_socket()
  netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline
  net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline
  net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles
  mvpp2: ethtool rxtx stats fix
  MAINTAINERS: switch to my private email for Renesas Ethernet drivers
  rocker: fix incorrect error handling in dma_rings_init
  test_objagg: Fix potential memory leak in error handling
  net: ethernet: mtk-star-emac: simplify interrupt handling
  mld: fix memory leak in ipv6_mc_destroy_dev()
  bnxt_en: Return from timer if interface is not in open state.
  bnxt_en: Fix AER reset logic on 57500 chips.
  ...

Pull AFS fixes from David Howells:
 "I've managed to get xfstests kind of working with afs. Here are a set
  of patches that fix most of the bugs found.

  There are a number of primary issues:

   - Incorrect handling of mtime and non-handling of ctime. It might be
     argued, that the latter isn't a bug since the AFS protocol doesn't
     support ctime, but I should probably still update it locally.

   - Shared-write mmap, truncate and writeback bugs. This includes not
     changing i_size under the callback lock, overwriting local i_size
     with the reply from the server after a partial writeback, not
     limiting the writeback from an mmapped page to EOF.

   - Checks for an abort code indicating that the primary vnode in an
     operation was deleted by a third-party are done in the wrong place.

   - Silly rename bugs. This includes an incomplete conversion to the
     new operation handling, duplicate nlink handling, nlink changing
     not being done inside the callback lock and insufficient handling
     of third-party conflicting directory changes.

  And some secondary ones:

   - The UAEOVERFLOW abort code should map to EOVERFLOW not EREMOTEIO.

   - Remove a couple of unused or incompletely used bits.

   - Remove a couple of redundant success checks.

  These seem to fix all the data-corruption bugs found by

	./check -afs -g quick

  along with the obvious silly rename bugs and time bugs.

  There are still some test failures, but they seem to fall into two
  classes: firstly, the authentication/security model is different to
  the standard UNIX model and permission is arbitrated by the server and
  cached locally; and secondly, there are a number of features that AFS
  does not support (such as mknod). But in these cases, the tests
  themselves need to be adapted or skipped.

  Using the in-kernel afs client with xfstests also found a bug in the
  AuriStor AFS server that has been fixed for a future release"

* tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix silly rename
  afs: afs_vnode_commit_status() doesn't need to check the RPC error
  afs: Fix use of afs_check_for_remote_deletion()
  afs: Remove afs_operation::abort_code
  afs: Fix yfs_fs_fetch_status() to honour vnode selector
  afs: Remove yfs_fs_fetch_file_status() as it's not used
  afs: Fix the mapping of the UAEOVERFLOW abort code
  afs: Fix truncation issues and mmap writeback size
  afs: Concoct ctimes
  afs: Fix EOF corruption
  afs: afs_write_end() should change i_size under the right lock
  afs: Fix non-setting of mtime when writing into mmap

Remove SH-5 documentation index entries following the removal
of SH-5 source code.

Error: Cannot open file ../arch/sh/mm/tlb-sh5.c
Error: Cannot open file ../arch/sh/mm/tlb-sh5.c
Error: Cannot open file ../arch/sh/include/asm/tlb_64.h
Error: Cannot open file ../arch/sh/include/asm/tlb_64.h

Fixes: 3b69e8b4 ("Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Rich Felker <dalias@libc.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: ysato@users.sourceforge.jp
Cc: linux-sh@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull flexible-array member conversions from Gustavo A. R. Silva:
 "Replace zero-length arrays with flexible-array members.

  Notice that all of these patches have been baking in linux-next for
  two development cycles now.

  There is a regular need in the kernel to provide a way to declare
  having a dynamically sized set of trailing elements in a structure.
  Kernel code should always use “flexible array members”[1] for these
  cases. The older style of one-element or zero-length arrays should no
  longer be used[2].

  C99 introduced “flexible array members”, which lacks a numeric size
  for the array declaration entirely:

        struct something {
                size_t count;
                struct foo items[];
        };

  This is the way the kernel expects dynamically sized trailing elements
  to be declared. It allows the compiler to generate errors when the
  flexible array does not occur last in the structure, which helps to
  prevent some kind of undefined behavior[3] bugs from being
  inadvertently introduced to the codebase.

  It also allows the compiler to correctly analyze array sizes (via
  sizeof(), CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For
  instance, there is no mechanism that warns us that the following
  application of the sizeof() operator to a zero-length array always
  results in zero:

        struct something {
                size_t count;
                struct foo items[0];
        };

        struct something *instance;

        instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
        instance->count = count;

        size = sizeof(instance->items) * instance->count;
        memcpy(instance->items, source, size);

  At the last line of code above, size turns out to be zero, when one
  might have thought it represents the total size in bytes of the
  dynamic memory recently allocated for the trailing array items. Here
  are a couple examples of this issue[4][5].

  Instead, flexible array members have incomplete type, and so the
  sizeof() operator may not be applied[6], so any misuse of such
  operators will be immediately noticed at build time.

  The cleanest and least error-prone way to implement this is through
  the use of a flexible array member:

        struct something {
                size_t count;
                struct foo items[];
        };

        struct something *instance;

        instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
        instance->count = count;

        size = sizeof(instance->items[0]) * instance->count;
        memcpy(instance->items, source, size);

  instead"

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
[4] commit f2cd32a4 ("rndis_wlan: Remove logically dead code")
[5] commit ab91c2a8 ("tpm: eventlog: Replace zero-length array with flexible-array member")
[6] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html

* tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (41 commits)
  w1: Replace zero-length array with flexible-array
  tracing/probe: Replace zero-length array with flexible-array
  soc: ti: Replace zero-length array with flexible-array
  tifm: Replace zero-length array with flexible-array
  dmaengine: tegra-apb: Replace zero-length array with flexible-array
  stm class: Replace zero-length array with flexible-array
  Squashfs: Replace zero-length array with flexible-array
  ASoC: SOF: Replace zero-length array with flexible-array
  ima: Replace zero-length array with flexible-array
  sctp: Replace zero-length array with flexible-array
  phy: samsung: Replace zero-length array with flexible-array
  RxRPC: Replace zero-length array with flexible-array
  rapidio: Replace zero-length array with flexible-array
  media: pwc: Replace zero-length array with flexible-array
  firmware: pcdp: Replace zero-length array with flexible-array
  oprofile: Replace zero-length array with flexible-array
  block: Replace zero-length array with flexible-array
  tools/testing/nvdimm: Replace zero-length array with flexible-array
  libata: Replace zero-length array with flexible-array
  kprobes: Replace zero-length array with flexible-array
  ...

The purgatory Makefile removes -fstack-protector options if they were
configured in, but does not currently add -fno-stack-protector.

If gcc was configured with the --enable-default-ssp configure option,
this results in the stack protector still being enabled for the
purgatory (absent distro-specific specs files that might disable it
again for freestanding compilations), if the main kernel is being
compiled with stack protection enabled (if it's disabled for the main
kernel, the top-level Makefile will add -fno-stack-protector).

This will break the build since commit
  e4160b2e ("x86/purgatory: Fail the build if purgatory.ro has missing symbols")
and prior to that would have caused runtime failure when trying to use
kexec.

Explicitly add -fno-stack-protector to avoid this, as done in other
Makefiles that need to disable the stack protector.
Reported-by: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2020-06-16

This series contains fixes to e1000 and e1000e.

Chen fixes an e1000e issue where systems could be waken via WoL, even
though the user has disabled the wakeup bit via sysfs.

Vaibhav Gupta updates the e1000 driver to clean up the legacy Power
Management hooks.

Arnd Bergmann cleans up the inconsistent use CONFIG_PM_SLEEP
preprocessor tags, which also resolves the compiler warnings about the
possibility of unused structure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The CONFIG_PM_SLEEP #ifdef checks in this file are inconsistent,
leading to a warning about sometimes unused function:

drivers/net/ethernet/intel/e1000e/netdev.c:137:13: error: unused function 'e1000e_check_me' [-Werror,-Wunused-function]

Rather than adding more #ifdefs, just remove them completely
and mark the PM functions as __maybe_unused to let the compiler
work it out on it own.

Fixes: e086ba2f ("e1000e: disable s0ix entry and exit flows for ME systems")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

With legacy PM hooks, it was the responsibility of a driver to manage PCI
states and also the device's power state. The generic approach is to let PCI
core handle the work.

e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks.
__e1000_shutdown() modifies the value of "wake" (device should be wakeup
enabled or not), responsible for controlling the flow of legacy PM.

Since, PCI core has no idea about the value of "wake", new code for generic
PM may produce unexpected results. Thus, use "device_set_wakeup_enable()"
to wakeup-enable the device accordingly.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently the system will be woken up via WOL(Wake On LAN) even if the
device wakeup ability has been disabled via sysfs:
 cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup
 disabled

The system should not be woken up if the user has explicitly
disabled the wake up ability for this device.

This patch clears the WOL ability of this network device if the
user has disabled the wake up ability in sysfs.

Fixes: bc7f75fa ("[E1000E]: New pci-express e1000 driver")
Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Without a MODULE_DEVICE_TABLE the attributes are missing that create
an alias for auto-loading the module in userspace via hotplug.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix AFS's silly rename by the following means:

 (1) Set the destination directory in afs_do_silly_rename() so as to avoid
     misbehaviour and indicate that the directory data version will
     increment by 1 so as to avoid warnings about unexpected changes in the
     DV.  Also indicate that the ctime should be updated to avoid xfstest
     grumbling.

 (2) Note when the server indicates that a directory changed more than we
     expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a
     third party change, checking on successful completion of unlink and
     rename.

     The problem is that the FS.RemoveFile RPC op doesn't report the status
     of the unlinked file, though YFS.RemoveFile2 does.  This can be
     mitigated by the assumption that if the directory DV cranked by
     exactly 1, we can be sure we removed one link from the file; further,
     ordinarily in AFS, files cannot be hardlinked across directories, so
     if we reduce nlink to 0, the file is deleted.

     However, if the directory DV jumps by more than 1, we cannot know if a
     third party intervened by adding or removing a link on the file we
     just removed a link from.

     The same also goes for any vnode that is at the destination of the
     FS.Rename RPC op.

 (3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock
     section along with the other attribute updates if ->op_unlinked is set
     on the descriptor for the appropriate vnode.

 (4) Issue a follow up status fetch to the unlinked file in the event of a
     third party conflict that makes it impossible for us to know if we
     actually deleted the file or not.

 (5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to
     the user about the nlink of a silly deleted file so that it appears as
     0, not 1.

Found with the generic/035 and generic/084 xfstests.

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>

The port's headroom buffers are used to store packets while they
traverse the device's pipeline and also to store packets that are egress
mirrored.

On Spectrum-3, ports with eight lanes use two headroom buffers between
which the configured headroom size is split.

In order to prevent packet loss, multiply the calculated headroom size
by two for 8x ports.

Fixes: da382875 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Code to initialize the conf structure while gathering the configuration
of the device was missing.

Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Martin <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The remove function does not destroy all
BM Pools when per cpu pool is active.

When reloading the mvpp2 as a module the BM Pools
are still active in hardware and due to the bug
have twice the size now old + new.

This eventually leads to a kernel crash.

v2:
* add Fixes tag

Fixes: 7d04b0b1 ("mvpp2: percpu buffers")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Back in 2013, we made a change that broke fast retransmit
for non SACK flows.

Indeed, for these flows, a sender needs to receive three duplicate
ACK before starting fast retransmit. Sending ACK with different
receive window do not count.

Even if enabling SACK is strongly recommended these days,
there still are some cases where it has to be disabled.

Not increasing the window seems better than having to
rely on RTO.

After the fix, following packetdrill test gives :

// Initialize connection
    0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
   +0 bind(3, ..., ...) = 0
   +0 listen(3, 1) = 0

   +0 < S 0:0(0) win 32792 <mss 1000,nop,wscale 7>
   +0 > S. 0:0(0) ack 1 <mss 1460,nop,wscale 8>
   +0 < . 1:1(0) ack 1 win 514

   +0 accept(3, ..., ...) = 4

   +0 < . 1:1001(1000) ack 1 win 514
// Quick ack
   +0 > . 1:1(0) ack 1001 win 264

   +0 < . 2001:3001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
   +0 > . 1:1(0) ack 1001 win 264

   +0 < . 3001:4001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
   +0 > . 1:1(0) ack 1001 win 264

   +0 < . 4001:5001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
    +0 > . 1:1(0) ack 1001 win 264

   +0 < . 1001:2001(1000) ack 1 win 514
// Hole is repaired.
   +0 > . 1:1(0) ack 5001 win 272

Fixes: 4e4f1fc2 ("tcp: properly increase rcv_ssthresh for ofo packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MFD fix from Lee Jones:
 "Fix NULL pointer dereference in mt6360 driver"

* tag 'mfd-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: mt6360: Fix register driver NULL pointer by adding driver name

afs_vnode_commit_status() is only ever called if op->error is 0, so remove
the op->error checks from the function.

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>

afs_check_for_remote_deletion() checks to see if error ENOENT is returned
by the server in response to an operation and, if so, marks the primary
vnode as having been deleted as the FID is no longer valid.

However, it's being called from the operation success functions, where no
abort has happened - and if an inline abort is recorded, it's handled by
afs_vnode_commit_status().

Fix this by actually calling the operation aborted method if provided and
having that point to afs_check_for_remote_deletion().

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>

Remove afs_operation::abort_code as it's read but never set.  Use
ac.abort_code instead.
Signed-off-by: David Howells <dhowells@redhat.com>

Fix yfs_fs_fetch_status() to honour the vnode selector in
op->fetch_status.which as does afs_fs_fetch_status() that allows
afs_do_lookup() to use this as an alternative to the InlineBulkStatus RPC
call if not implemented by the server.

This doesn't matter in the current code as YFS servers always implement
InlineBulkStatus, but a subsequent will call it on YFS servers too in some
circumstances.

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>

Remove yfs_fs_fetch_file_status() as it's no longer used.
Signed-off-by: David Howells <dhowells@redhat.com>

The driver name was accidentally removed when .probe() by was replaced
by .probe_new() during an early patch review.

[  121.243012] EAX: c2a8bc64 EBX: 00000000 ECX: 00000000 EDX: 00000000
[  121.243012] ESI: c2a8bc79 EDI: 00000000 EBP: e54bdea8 ESP: e54bdea0
[  121.243012] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010286
[  121.243012] CR0: 80050033 CR2: 00000000 CR3: 02ec3000 CR4: 000006b0
[  121.243012] Call Trace:
[  121.243012]  kset_find_obj+0x3d/0xc0
[  121.243012]  driver_find+0x16/0x40
[  121.243012]  driver_register+0x49/0x100
[  121.243012]  ? i2c_for_each_dev+0x39/0x50
[  121.243012]  ? __process_new_adapter+0x20/0x20
[  121.243012]  ? cht_wc_driver_init+0x11/0x11
[  121.243012]  i2c_register_driver+0x30/0x80
[  121.243012]  ? intel_lpss_pci_driver_init+0x16/0x16
[  121.243012]  mt6360_pmu_driver_init+0xf/0x11
[  121.243012]  do_one_initcall+0x33/0x1a0
[  121.243012]  ? parse_args+0x1eb/0x3d0
[  121.243012]  ? __might_sleep+0x31/0x90
[  121.243012]  ? kernel_init_freeable+0x10a/0x17f
[  121.243012]  kernel_init_freeable+0x12c/0x17f
[  121.243012]  ? rest_init+0x110/0x110
[  121.243012]  kernel_init+0xb/0x100
[  121.243012]  ? schedule_tail_wrapper+0x9/0xc
[  121.243012]  ret_from_fork+0x19/0x24
[  121.243012] Modules linked in:
[  121.243012] CR2: 0000000000000000
[  121.243012] random: get_random_bytes called from init_oops_id+0x3a/0x40 with crng_init=0
[  121.243012] ---[ end trace 38a803400f1a2bee ]---
[  121.243012] EIP: strcmp+0x11/0x30

Fixes: 7edd3634 ("mfd: Add support for PMIC MT6360")
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org>
[Lee: Taking the opportunity to fix the compatible string too 's/_/-/']
Signed-off-by: Lee Jones <lee.jones@linaro.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>