- 28 Jul, 2017 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes i915 fixes for -rc3 Bit more than usual since we missed -rc2. 4x cc: stable, 2 gvt patches, but all fairly minor stuff. Last minute rebase was to add a few missing cc: stable, I did prep the pull this morning already and made sure CI approves. * tag 'drm-intel-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Fix bad comparison in skl_compute_plane_wm. drm/i915: Force CPU synchronisation even if userspace requests ASYNC drm/i915: Only skip updating execobject.offset after error drm/i915: Only mark the execobject as pinned on success drm/i915: Remove assertion from raw __i915_vma_unpin() drm/i915/cnl: Fix loadgen select programming on ddi vswing sequence drm/i915: Fix scaler init during CRTC HW state readout drm/i915/selftests: Fix an error handling path in 'mock_gem_device()' drm/i915: Unbreak gpu reset vs. modeset locking drm/i915: Fix cursor updates on some platforms drm/i915: Fix user ptr check size in eb_relocate_vma() drm/i915/gvt: Extend KBL platform support in GVT-g drm/i915/gvt: Fix the vblank timer close issue after shutdown VMs in reverse
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Core Changes: - dp: A few fixes in drm_dp_downstream_debug() (Chris) - rockchip: sanitize the Kconfig dependencies (fallout from EXTCON) (Arnd) - host1x: Free the iommu domain when attach_device fails (Paul) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Kocialkowski <contact@paulk.fr> * tag 'drm-misc-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-misc: gpu: host1x: Free the IOMMU domain when there is no device to attach drm/rockchip: fix Kconfig dependencies drm/dp: Don't trust drm_dp_downstream_id() drm/dp: Fix read pointer for drm_dp_downsteam_debug()
-
- 27 Jul, 2017 13 commits
-
-
https://github.com/01org/gvt-linuxDaniel Vetter authored
gvt-fixes-2017-07-26 - Turn on KBL support for more SKUs (Jianjun) - Fix vblank timer close bug (Fred) Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170726075621.hrauvik62gi2jecj@zhen-hp.sh.intel.com
-
Maarten Lankhorst authored
ddb_allocation && ddb_allocation / blocks_per_line >= 1 is the same as ddb_allocation >= blocks_per_line, so use the latter to simplify this. This fixes the following compiler warning: drivers/gpu/drm/i915/intel_pm.c:4467]: (warning) Comparison of a boolean expression with an integer other than 0 or 1. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: d555cb58 ("drm/i915/skl+: use linetime latency if ddb size is not available") Cc: "Mahesh Kumar" <mahesh1.kumar@intel.com> Reported-by:
David Binderman <dcb314@hotmail.com> Cc: David Binderman <dcb314@hotmail.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+ Reviewed-by:
Mahesh Kumar <mahesh1.kumar@intel.com> (cherry picked from commit 54d20ed1) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170717111355.4523-1-maarten.lankhorst@linux.intel.comSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Chris Wilson authored
The goal here was to minimise doing any thing or any check inside the kernel that was not strictly required. For a userspace that assumes complete control over the cache domains, the kernel is usually using outdated information and may trigger clflushes where none were required. However, swapping is a situation where userspace has no knowledge of the domain transfer, and will leave the object in the CPU cache. The kernel must flush this out to the backing storage prior to use with the GPU. As we use an asynchronous task tracked by an implicit fence for this, we also need to cancel the ASYNC flag on the object so that the object will wait for the clflush to complete before being executed. This also absolves userspace of the responsibility imposed by commit 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing") that its needed to ensure that the object was out of the CPU cache prior to use on the GPU. Fixes: 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101571Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by:
Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-5-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
I was being overly paranoid in not updating the execobject.offset after performing the fallback copy where we set reloc.presumed_offset to -1. The thinking was to ensure that a subsequent NORELOC execbuf would be forced to process the invalid relocations. However this is overkill so long as we *only* update the execobject.offset following a successful update of the relocation value witin the batch. If we have to repeat the execbuf due to a later interruption, then we may skip the relocations on the second pass (honouring NORELOC) since the execobject.offset match the actual offsets (even though reloc.presumed_offset is garbage). Subsequent calls to execbuf with NORELOC should themselves ensure that the reloc.presumed_offset have been corrected in case of future migration. Reporting back the actual execobject.offset, even when reloc.presumed_offset is garbage, ensures that reuse of those objects use the latest information to avoid relocations. Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101635Signed-off-by:
-
Chris Wilson authored
If we fail to acquire a fence (for old school fenced GPU access) then we unwind the vma reservation, including its pin. However, we were making the execobject as holding the pin before erring out, leading to a double unpin: [ 3193.991802] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:287! [ 3193.998131] invalid opcode: 0000 [#1] PREEMPT SMP [ 3194.002816] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich mei_me e1000e mei prime_numbers ptp pps_core [last unloaded: i915] [ 3194.022841] CPU: 0 PID: 8123 Comm: kms_flip Tainted: G U 4.13.0-rc1-CI-CI_DRM_471+ #1 [ 3194.031765] Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A04 11/05/2007 [ 3194.040343] task: ffff8800785d4c40 task.stack: ffffc90001768000 [ 3194.046339] RIP: 0010:eb_release_vmas.isra.6+0x119/0x180 [i915] [ 3194.052234] RSP: 0018:ffffc9000176ba80 EFLAGS: 00010246 [ 3194.057439] RAX: 00000000000003c0 RBX: ffff8800710fc2d8 RCX: ffff8800588e4f48 [ 3194.064546] RDX: ffffffff1fffffff RSI: 00000000ffffffff RDI: ffff8800588e00d0 [ 3194.071654] RBP: ffffc9000176bab0 R08: 0000000000000000 R09: 0000000000000000 [ 3194.078761] R10: 0000000000000040 R11: 0000000000000001 R12: ffff880060822f00 [ 3194.085867] R13: 0000000000000310 R14: 00000000000003b8 R15: ffffc9000176bbb0 [ 3194.092975] FS: 00007fd2b94aba40(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000 [ 3194.101033] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3194.106754] CR2: 00007ffbec3ff000 CR3: 0000000074e67000 CR4: 00000000000006f0 [ 3194.113861] Call Trace: [ 3194.116321] eb_relocate_slow+0x67/0x4e0 [i915] [ 3194.120861] i915_gem_do_execbuffer+0x429/0x1260 [i915] [ 3194.126070] ? lock_acquire+0xb5/0x210 [ 3194.129803] ? __might_fault+0x39/0x90 [ 3194.133563] i915_gem_execbuffer2+0x9b/0x1b0 [i915] [ 3194.138447] ? i915_gem_execbuffer+0x2b0/0x2b0 [i915] [ 3194.143478] drm_ioctl_kernel+0x64/0xb0 [ 3194.147298] drm_ioctl+0x2cd/0x390 [ 3194.150710] ? i915_gem_execbuffer+0x2b0/0x2b0 [i915] [ 3194.155741] ? finish_task_switch+0xa5/0x210 [ 3194.159993] ? finish_task_switch+0x6a/0x210 [ 3194.164247] do_vfs_ioctl+0x90/0x670 [ 3194.167806] ? entry_SYSCALL_64_fastpath+0x5/0xb1 [ 3194.172492] ? __this_cpu_preempt_check+0x13/0x20 [ 3194.177176] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 3194.181946] SyS_ioctl+0x3c/0x70 [ 3194.185159] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 3194.189756] RIP: 0033:0x7fd2b76a8587 [ 3194.193314] RSP: 002b:00007fff074845b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 3194.200855] RAX: ffffffffffffffda RBX: ffffffff8146da43 RCX: 00007fd2b76a8587 [ 3194.207962] RDX: 00007fff074846e0 RSI: 0000000040406469 RDI: 0000000000000003 [ 3194.215068] RBP: ffffc9000176bf88 R08: 0000000000000000 R09: 0000000000000003 [ 3194.222175] R10: 00007fd2b796bb58 R11: 0000000000000246 R12: 00007fff07484880 [ 3194.229280] R13: 0000000000000003 R14: 0000000040406469 R15: 0000000000000000 [ 3194.236386] ? __this_cpu_preempt_check+0x13/0x20 [ 3194.241070] Code: 24 b0 00 00 00 48 85 c9 0f 84 6c ff ff ff 8b 41 20 85 c0 7e 73 83 e8 01 89 41 20 41 8b 84 24 e8 00 00 00 a8 0f 0f 85 5f ff ff ff <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d f3 c3 49 8b 84 [ 3194.259943] RIP: eb_release_vmas.isra.6+0x119/0x180 [i915] RSP: ffffc9000176ba80 [ 3194.268047] ---[ end trace 1d7348c6575d8800 ]--- [ 3673.658819] softdog: Initiating panic [ 3673.662471] Kernel panic - not syncing: Software Watchdog Timer expired [ 3673.669066] Kernel Offset: disabled [ 3673.672541] Rebooting in 1 seconds.. Reported-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by:
-
Chris Wilson authored
After we detect a i915_vma pin overflow, we call __i915_vma_unpin to cleanup. However, on an overflow the pin_count bitfield will be zero, triggering an assertion, even though we the intention is to merely warn and report the error back to the user (as historically the culprit has be a leak in the display code). Fixes: 20dfbde4 ("drm/i915: Wrap vma->pin_count accessors with small inline helpers") Signed-off-by:
-
Navare, Manasi D authored
The condition for setting the Loadgen Select bit of PORT_TX_DW4 register during DDI Vswing Sequence should be Bit rate <=6 GHz whereas the existing code checks only Bit Rate < 6GHz. This patch fixes this condition. While at it also remove the redundant paranthesis. Fixes: cf54ca8b ("drm/i915/cnl: Implement voltage swing sequence.") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Imre Deak authored
The scaler allocation code depends on a non-zero default value for the crtc scaler_id, so make sure we initialize the scaler state accordingly even if the crtc is off. This fixes at least an initial YUV420 modeset (added in a follow-up patchset by Shashank) when booting with the screen off: after the initial HW readout and modeset which enables the scaler a subsequent modeset will disable the scaler which isn't properly allocated. This results in a funky HW state where the pipe scaler HW registers can't be modified and the normally black screen is grey and shifted to the right or jitters. The problem was revealed by Shashank's YUV420 patchset and first reported by Ville. v2: - In the stable tag also include versions which need backporting (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chandra Konduru <chandra.konduru@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # 4.2.x Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: a1b2278e ("drm/i915: skylake panel fitting using shared scalers") Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Christophe JAILLET authored
Goto the right label in case of error, otherwise there is a leak. This has been introduced by c5cf9a91. In this patch a goto has not been updated. Fixes: c5cf9a91 ("drm/i915: Create a kmem_cache to allocate struct i915_priolist from") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20170719223503.30580-1-christophe.jaillet@wanadoo.frReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Daniel Vetter authored
Taking the modeset locks unconditionally isn't the greatest idea, because atm that part is still broken and times out (and then atomic keels over). And there's really no reason to do so, the old code didn't do that either. To make the patch a bit simpler let's also nuke 2 cases that are only around for the old mmioflip paths. Atomic nonblocking workers will not die (minus bugs) when a gpu reset happens. And of course this doesn't fix any of the gpu reset vs. modeset deadlock fun, but it at least stop modern CI machines from keeling over all over the place for no reason at all. And we still have the explicit testcases to run the fake gpu reset, so coverage isn't that much worse. v2: Split out additional changes on top, restrict this to purely reducing the critical section of modeset locks. v2: Review from Maarten - update comments - don't oops when state is NULL in intel_finish_reset, but try to at least still drop locks properly. The hw is going to be toast anyway. Fixes: 73974893 ("drm/i915: Fix modeset handling during gpu reset, v5.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Paul Kocialkowski authored
When there is no device to attach to the IOMMU domain, as may be the case when the device-tree does not contain the proper iommu node, it is best to keep going without IOMMU support rather than failing. This allows the driver to probe and function instead of taking down all of the tegra drm driver, leading to missing display support. Signed-off-by:
Paul Kocialkowski <contact@paulk.fr> Fixes: 404bfb78 ("gpu: host1x: Add IOMMU support") Reviewed-by:
Mikko Perttunen <mperttunen@nvidia.com> Tested-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170710193305.5987-1-contact@paulk.fr
-
Ville Syrjälä authored
Turns out that just writing CURPOS isn't sufficient to move the cursor on some platforms. My 830 works just fine, but eg. 945 and PNV don't. On those platforms we need to arm even the CURPOS update with a CURBASE write. Even worse, a write to any of the cursor register apart from CURBASE will cancel an already pending cursor update. So if we have armed a CURCNTR/CURBASE update, a subsequent CURPOS write prior to vblank would cancel that armed update. Thus we're left with a cursor that doesn't appear to move, or even change shape. Fix the problem by always performing the CURBASE write after a CURPOS write. Bspec is somewhat unclear which platforms actually require this CURBASE write and which don't. So to keep it simple and to make sure we really fix the problem across all supported devices, let's just perform the CURBASE write unconditionally. Cc: Paul Menzel <pmenzel@molgen.mpg.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101790 Fixes: 75343a44 ("drm/i915: Drop useless posting reads from cursor commit") Signed-off-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
-
Imre Deak authored
Fix the sizeof(ptr) vs. sizeof(*ptr) typo. Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
- 26 Jul, 2017 1 commit
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Three misc amd fixes. * 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: fix AVFS voltage offset for Vega10 drm/amdgpu/gfx9: simplify and fix GRBM index selection drm/amdgpu: Fix blocking in RCU critical section(v2)
-
- 25 Jul, 2017 7 commits
-
-
Eric Huang authored
Signed-off-by:
Eric Huang <JinHuiEric.Huang@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Nicolai Hähnle authored
Copy the approach taken by gfx8, which simplifies the code, and set the instance index properly. The latter is required for debugging, e.g. for reading wave status by UMR. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
-
Alex Xie authored
In RCU read-side critical sections, blocking or sleeping is prohibited. v2: Unlock RCU for the code path where result==NULL. (David Zhou) Update subject Tested-by and reported by: Dave Airlie <airlied@redhat.com> [ 141.965723] ============================= [ 141.965724] WARNING: suspicious RCU usage [ 141.965726] 4.12.0-rc7 #221 Not tainted [ 141.965727] ----------------------------- [ 141.965728] /home/airlied/devel/kernel/linux-2.6/include/linux/rcupdate.h:531 Illegal context switch in RCU read-side critical section! [ 141.965730] other info that might help us debug this: [ 141.965731] rcu_scheduler_active = 2, debug_locks = 0 [ 141.965732] 1 lock held by amdgpu_cs:0/1332: [ 141.965733] #0: (rcu_read_lock){......}, at: [<ffffffffa01a0d07>] amdgpu_bo_list_get+0x0/0x109 [amdgpu] [ 141.965774] stack backtrace: [ 141.965776] CPU: 6 PID: 1332 Comm: amdgpu_cs:0 Not tainted 4.12.0-rc7 #221 [ 141.965777] Hardware name: To be filled by O.E.M. To be filled by O.E.M./M5A97 R2.0, BIOS 2603 06/26/2015 [ 141.965778] Call Trace: [ 141.965782] dump_stack+0x68/0x92 [ 141.965785] lockdep_rcu_suspicious+0xf7/0x100 [ 141.965788] ___might_sleep+0x56/0x1fc [ 141.965790] __might_sleep+0x68/0x6f [ 141.965793] __mutex_lock+0x4e/0x7b5 [ 141.965817] ? amdgpu_bo_list_get+0xa4/0x109 [amdgpu] [ 141.965820] ? lock_acquire+0x125/0x1b9 [ 141.965844] ? amdgpu_bo_list_set+0x464/0x464 [amdgpu] [ 141.965846] mutex_lock_nested+0x16/0x18 [ 141.965848] ? mutex_lock_nested+0x16/0x18 [ 141.965872] amdgpu_bo_list_get+0xa4/0x109 [amdgpu] [ 141.965895] amdgpu_cs_ioctl+0x4a0/0x17dd [amdgpu] [ 141.965898] ? radix_tree_node_alloc.constprop.11+0x77/0xab [ 141.965916] drm_ioctl+0x264/0x393 [drm] [ 141.965939] ? amdgpu_cs_find_mapping+0x83/0x83 [amdgpu] [ 141.965942] ? trace_hardirqs_on_caller+0x16a/0x186 Signed-off-by:Alex Xie <AlexBin.Xie@amd.com> Reviewed-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
git://github.com/skeggsb/linuxDave Airlie authored
two more fixes for issues nouveau found in fedora 26. * 'linux-4.13' of git://github.com/skeggsb/linux: drm/nouveau/bar/gf100: fix access to upper half of BAR2 drm/nouveau/disp/nv50-: bump max chans to 21
-
Ben Skeggs authored
Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by:Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org # 4.3+
-
Ilia Mirkin authored
GP102's cursors go from chan 17..20. Increase the array size to hold their data properly. Fixes: e50fcff1 ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Jian Jun Chen authored
Extend KBL platform support in GVT-g. Validation tests are done on KBL server and KBL NUC. Both show the same quality. Signed-off-by:
Jian Jun Chen <jian.jun.chen@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
- 24 Jul, 2017 7 commits
-
-
git://people.freedesktop.org/~syeh/repos_linuxDave Airlie authored
misc vmwgfx fixes. * 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: constify pci_device_id. drm/vmwgfx: Fix gcc-7.1.1 warning drm/vmwgfx: Fix cursor hotspot issue with Wayland on Fedora drm/vmwgfx: Limit max desktop dimensions to 8Kx8K drm/vmwgfx: dma-buf: Constify ttm_place structures. drm/vmwgfx: fix comment mistake for vmw_cmd_dx_set_index_buffer() drm/vmwgfx: Use dma_pool_zalloc drm/vmwgfx: Fix handling of errors returned by 'vmw_cotable_alloc()' drm/vmwgfx: Fix NULL pointer comparison
-
git://github.com/skeggsb/linuxDave Airlie authored
nouveau regression fixes. * 'linux-4.13' of git://github.com/skeggsb/linux: drm/nouveau/kms: remove call to drm_crtc_vblank_off() during unload/suspend drm/nouveau/kms/nv50: update vblank state in response to modeset actions drm/nouveau/disp: add tv encoders to output resource mapping drm/nouveau/i2c/gf119-: add support for address-only transactions
-
Ben Skeggs authored
These on()/off() calls should be done as a result of modesetting actions, and as we shut down all heads already on unload/suspend, it's pointless to call off() again. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
We don't support them on G80, but we need to add them to the mapping to avoid triggering a WARN_ON() on GPUs where the ports are present. Signed-off-by: -
Ben Skeggs authored
Since switching the I2C-over-AUX helpers, there have been regressions on some display combinations due to us not having support for "address only" transactions. This commits enables support for them for GF119 and newer. Earlier GPUs have been reverted to a custom I2C-over-AUX algorithm. Signed-off-by: -
Arnd Bergmann authored
A bug that I had fixed earlier just came back, with CONFIG_EXTCON=m, the rockchip drm driver will fail to link: drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_get_port_lanes': cdn-dp-core.c:(.text.cdn_dp_get_port_lanes+0x30): undefined reference to `extcon_get_state' cdn-dp-core.c:(.text.cdn_dp_get_port_lanes+0x6c): undefined reference to `extcon_get_property' drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_check_sink_connection': cdn-dp-core.c:(.text.cdn_dp_check_sink_connection+0x80): undefined reference to `extcon_get_state' drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_enable': cdn-dp-core.c:(.text.cdn_dp_enable+0x748): undefined reference to `extcon_get_property' The problem is that that the sub-drivers are now all linked into the main rockchip drm module, which breaks all the Kconfig dependencies that are specified in the options for those sub-drivers. This clarifies the dependency to ensure that we can only turn on the DP driver when EXTCON is reachable. As the 'select' statements can now cause additional options to become built-in when they should be loadable modules, I'm moving those into the main driver config option. The dependency on DRM_ROCKCHIP can be reduced into a single 'if' statement here for brevity, but this has no functional effect. Fixes: b6705157 ("drm/rockchip: add extcon dependency for DP") Fixes: 8820b68b ("drm/rockchip: Refactor the component match logic.") Link: https://patchwork.kernel.org/patch/9648761/Acked-by:
Guenter Roeck <groeck@chromium.org> Tested-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mark Yao <mark.yao@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170721211214.3386387-1-arnd@arndb.de
-
- 23 Jul, 2017 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This adds a perl script to actually parse the MAINTAINERS file, clean up some whitespace in it, warn about errors in it, and then properly sort the end result. My perl-fu is atrocious, so the script has basically been created by randomly putting various characters in a pile, mixing them around, and then looking it the end result does anything interesting when used as a perl script. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Prepping for scripting the MAINTAINERS file cleanup (and possible split) showed a couple of cases where the headers for a couple of entries were bogus. There's a few different kinds of bogosities: - the X-GENE SOC EDAC case was confused and split over two lines - there were four entries for "GREYBUS PROTOCOLS DRIVERS" that were all different things. - the NOKIA N900 CAMERA SUPPORT" was duplicated all of which were more obvious when you started doing associative arrays in perl to track these things by the header (so that we can alphabetize this thing properly, and so that we might split it up by the data too). Cc: Joe Perches <joe@perches.com> Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Some fixes and cleanups for running under Xen" * tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: don't online new memory initially xen/x86: fix cpu hotplug xen/grant-table: log the lack of grants xen/x86: Don't BUG on CPU0 offlining
-
Juergen Gross authored
When setting up the Xenstore watch for the memory target size the new watch will fire at once. Don't try to reach the configured target size by onlining new memory in this case, as the current memory size will be smaller in almost all cases due to e.g. BIOS reserved pages. Onlining new memory will lead to more problems e.g. undesired conflicts with NVMe devices meant to be operated as block devices. Instead remember the difference between target size and current size when the watch fires for the first time and apply it to any further size changes, too. In order to avoid races between balloon.c and xen-balloon.c init calls do the xen-balloon.c initialization from balloon.c. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Juergen Gross authored
Commit dc6416f1 ("xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()") introduced an error leading to a stack overflow of the idle task when a cpu was brought offline/online many times: by calling cpu_startup_entry() instead of returning at the end of xen_play_dead() do_idle() would be entered again and again. Don't use cpu_startup_entry(), but cpuhp_online_idle() instead allowing to return from xen_play_dead(). Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by:
-
Wengang Wang authored
log a message when we enter this situation: 1) we already allocated the max number of available grants from hypervisor and 2) we still need more (but the request fails because of 1)). Sometimes the lack of grants causes IO hangs in xen_blkfront devices. Adding this log would help debuging. Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
-
Vitaly Kuznetsov authored
CONFIG_BOOTPARAM_HOTPLUG_CPU0 allows to offline CPU0 but Xen HVM guests BUG() in xen_teardown_timer(). Remove the BUG_ON(), this is probably a leftover from ancient times when CPU0 hotplug was impossible, it works just fine for HVM. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
-
- 22 Jul, 2017 2 commits
-
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Avoid buffer overruns in applesmc driver" * tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (applesmc) Avoid buffer overruns
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing huge at all, a revert of a patch that turned out to break things, a fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition correct, and a few minor serial driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix TIOCGPTPEER ioctl definition tty: hide unused pty_get_peer function tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART serial: imx: Prevent TX buffer PIO write when a DMA has been started Revert "serial: imx-serial - move DMA buffer configuration to DT" serial: sh-sci: Uninitialized variables in sysfs files serial: st-asc: Potential error pointer dereference
-
