In error handling 'free_cluster', before num_alloc clusters allocated,
p_chain->size will not updated and always 0, thus the newly allocated
clusters are not freed.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

When allocating a new cluster, exFAT first allocates from the
next cluster of the last cluster of the file. If the last cluster
of the file is the last cluster of the volume, allocate from the
first cluster. This is a normal case, but the following error log
will be printed. It makes users confused, so this commit removes
the error log.

[1960905.181545] exFAT-fs (sdb1): hint_cluster is invalid (262130)
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

In the removed code, num_clusters is 0, nothing is done in
exfat_chain_cont_cluster(), so it is unneeded, remove it.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

Sony PXW-Z280 camera add vendor allocation entries to directory of
pictures. Currently, linux exfat does not support it and the file is
not visible. This patch handle vendor extension and allocation entries
as unreconized benign secondary entries. As described in the specification,
it is recognized but ignored, and when deleting directory entry set,
the associated clusters allocation are removed as well as benign secondary
directory entries.
Reported-by: Barócsi Dénes <admin@tveger.hu>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

inode->i_blocks is not real number of blocks, but 512 byte ones.

Fixes: 98d91704 ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

When a file or a directory is deleted, the hint for the cluster of
its parent directory in its in-memory inode is set as DIR_DELETED.
Therefore, DIR_DELETED must be one of invalid cluster numbers. According
to the exFAT specification, a volume can have at most 2^32-11 clusters.
However, DIR_DELETED is wrongly defined as 0xFFFF0321, which could be
a valid cluster number. To fix it, let's redefine DIR_DELETED as
0xFFFFFFF7, the bad cluster number.

Fixes: 1acf1a56 ("exfat: add in-memory and on-disk structures and headers")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

Since seekdir() does not check whether the position is valid, the
position may exceed the size of the directory. We found that for
a directory with discontinuous clusters, if the position exceeds
the size of the directory and the excess size is greater than or
equal to the cluster size, exfat_readdir() will return -EIO,
causing a file system error and making the file system unavailable.

Reproduce this bug by:

seekdir(dir, dir_size + cluster_size);
dirent = readdir(dir);

The following log will be printed if mount with 'errors=remount-ro'.

[11166.712896] exFAT-fs (sdb1): error, invalid access to FAT (entry 0xffffffff)
[11166.712905] exFAT-fs (sdb1): Filesystem has been set read-only

Fixes: 1e5654de ("exfat: handle wrong stream entry size in exfat_readdir()")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

If the position is not aligned with the dentry size, the return
value of readdir() will be NULL and errno is 0, which means the
end of the directory stream is reached.

If the position is aligned with dentry size, but there is no file
or directory at the position, exfat_readdir() will continue to
get dentry from the next dentry. So the dentry gotten by readdir()
may not be at the position.

After this commit, if the position is not aligned with the dentry
size, round the position up to the dentry size and continue to get
the dentry.

Fixes: ca061973 ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

Pull x86 fix from Thomas Gleixner:
 "A single fix for x86.

  Revert the recent change to the MTRR code which aimed to support
  SEV-SNP guests on Hyper-V. It caused a regression on XEN Dom0 kernels.

  The underlying issue of MTTR (mis)handling in the x86 code needs some
  deeper investigation and is definitely not 6.2 material"

* tag 'x86-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mtrr: Revert 90b926e6 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")

Pull timer fix from Thomas Gleixner:
 "A fix for a long standing issue in the alarmtimer code.

  Posix-timers armed with a short interval with an ignored signal result
  in an unpriviledged DoS. Due to the ignored signal the timer switches
  into self rearm mode. This issue had been "fixed" before but a rework
  of the alarmtimer code 5 years ago lost that workaround.

  There is no real good solution for this issue, which is also worked
  around in the core posix-timer code in the same way, but it certainly
  moved way up on the ever growing todo list"

* tag 'timers-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Prevent starvation by small intervals and SIG_IGN

Pull irq fix from Thomas Gleixner:
 "A single build fix for the PCI/MSI infrastructure.

  The addition of the new alloc/free interfaces in this cycle forgot to
  add stub functions for pci_msix_alloc_irq_at() and pci_msix_free_irq()
  for the CONFIG_PCI_MSI=n case"

* tag 'irq-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI/MSI: Provide missing stubs for CONFIG_PCI_MSI=n

Pull kvm/x86 fixes from Paolo Bonzini:

 - zero all padding for KVM_GET_DEBUGREGS

 - fix rST warning

 - disable vPMU support on hybrid CPUs

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: initialize all of the kvm_debugregs structure before sending it to userspace
  perf/x86: Refuse to export capabilities for hybrid PMUs
  KVM: x86/pmu: Disable vPMU support on hybrid CPUs (host PMUs)
  Documentation/hw-vuln: Fix rST warning

Pull arm64 regression fix from Will Deacon:
 "Apologies for the _extremely_ late pull request here, but we had a
  'perf' (i.e. CPU PMU) regression on the Apple M1 reported on Wednesday
  [1] which was introduced by bd275681 ("perf: Rewrite core context
  handling") during the merge window.

  Mark and I looked into this and noticed an additional problem caused
  by the same patch, where the 'CHAIN' event (used to combine two
  adjacent 32-bit counters into a single 64-bit counter) was not being
  filtered correctly. Mark posted a series on Thursday [2] which
  addresses both of these regressions and I queued it the same day.

  The changes are small, self-contained and have been confirmed to fix
  the original regression.

  Summary:

   - Fix 'perf' regression for non-standard CPU PMU hardware (i.e. Apple
     M1)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: perf: reject CHAIN events at creation time
  arm_pmu: fix event CPU filtering

Pull block fix from Jens Axboe:
 "I guess this is what can happen when you prep things early for going
  away, something else comes in last minute. This one fixes another
  regression in 6.2 for NVMe, from this release, and hence we should
  probably get it submitted for 6.2.

  Still waiting for the original reporter (see bugzilla linked in the
  commit) to test this, but Keith managed to setup and recreate the
  issue and tested the patch that way"

* tag 'block-6.2-2023-02-17' of git://git.kernel.dk/linux:
  nvme-pci: refresh visible attrs for cmb attributes

Merge tag 'mm-hotfixes-stable-2023-02-17-15-16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Six hotfixes. Five are cc:stable: four for MM, one for nilfs2.

  Also a MAINTAINERS update"

* tag 'mm-hotfixes-stable-2023-02-17-15-16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix underflow in second superblock position calculations
  hugetlb: check for undefined shift on 32 bit architectures
  mm/migrate: fix wrongly apply write bit after mkdirty on sparc64
  MAINTAINERS: update FPU EMULATOR web page
  mm/MADV_COLLAPSE: set EAGAIN on unexpected page refcount
  mm/filemap: fix page end in filemap_get_read_batch

Macro NILFS_SB2_OFFSET_BYTES, which computes the position of the second
superblock, underflows when the argument device size is less than 4096
bytes.  Therefore, when using this macro, it is necessary to check in
advance that the device size is not less than a lower limit, or at least
that underflow does not occur.

The current nilfs2 implementation lacks this check, causing out-of-bound
block access when mounting devices smaller than 4096 bytes:

 I/O error, dev loop0, sector 36028797018963960 op 0x0:(READ) flags 0x0
 phys_seg 1 prio class 2
 NILFS (loop0): unable to read secondary superblock (blocksize = 1024)

In addition, when trying to resize the filesystem to a size below 4096
bytes, this underflow occurs in nilfs_resize_fs(), passing a huge number
of segments to nilfs_sufile_resize(), corrupting parameters such as the
number of segments in superblocks.  This causes excessive loop iterations
in nilfs_sufile_resize() during a subsequent resize ioctl, causing
semaphore ns_segctor_sem to block for a long time and hang the writer
thread:

 INFO: task segctord:5067 blocked for more than 143 seconds.
      Not tainted 6.2.0-rc8-syzkaller-00015-gf6feea56 #0
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 task:segctord        state:D stack:23456 pid:5067  ppid:2
 flags:0x00004000
 Call Trace:
  <TASK>
  context_switch kernel/sched/core.c:5293 [inline]
  __schedule+0x1409/0x43f0 kernel/sched/core.c:6606
  schedule+0xc3/0x190 kernel/sched/core.c:6682
  rwsem_down_write_slowpath+0xfcf/0x14a0 kernel/locking/rwsem.c:1190
  nilfs_transaction_lock+0x25c/0x4f0 fs/nilfs2/segment.c:357
  nilfs_segctor_thread_construct fs/nilfs2/segment.c:2486 [inline]
  nilfs_segctor_thread+0x52f/0x1140 fs/nilfs2/segment.c:2570
  kthread+0x270/0x300 kernel/kthread.c:376
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
  </TASK>
 ...
 Call Trace:
  <TASK>
  folio_mark_accessed+0x51c/0xf00 mm/swap.c:515
  __nilfs_get_page_block fs/nilfs2/page.c:42 [inline]
  nilfs_grab_buffer+0x3d3/0x540 fs/nilfs2/page.c:61
  nilfs_mdt_submit_block+0xd7/0x8f0 fs/nilfs2/mdt.c:121
  nilfs_mdt_read_block+0xeb/0x430 fs/nilfs2/mdt.c:176
  nilfs_mdt_get_block+0x12d/0xbb0 fs/nilfs2/mdt.c:251
  nilfs_sufile_get_segment_usage_block fs/nilfs2/sufile.c:92 [inline]
  nilfs_sufile_truncate_range fs/nilfs2/sufile.c:679 [inline]
  nilfs_sufile_resize+0x7a3/0x12b0 fs/nilfs2/sufile.c:777
  nilfs_resize_fs+0x20c/0xed0 fs/nilfs2/super.c:422
  nilfs_ioctl_resize fs/nilfs2/ioctl.c:1033 [inline]
  nilfs_ioctl+0x137c/0x2440 fs/nilfs2/ioctl.c:1301
  ...

This fixes these issues by inserting appropriate minimum device size
checks or anti-underflow checks, depending on where the macro is used.

Link: https://lkml.kernel.org/r/0000000000004e1dfa05f4a48e6b@google.com
Link: https://lkml.kernel.org/r/20230214224043.24141-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: <syzbot+f0c4082ce5ebebdac63b@syzkaller.appspotmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Users can specify the hugetlb page size in the mmap, shmget and
memfd_create system calls.  This is done by using 6 bits within the flags
argument to encode the base-2 logarithm of the desired page size.  The
routine hstate_sizelog() uses the log2 value to find the corresponding
hugetlb hstate structure.  Converting the log2 value (page_size_log) to
potential hugetlb page size is the simple statement:

	1UL << page_size_log

Because only 6 bits are used for page_size_log, the left shift can not be
greater than 63.  This is fine on 64 bit architectures where a long is 64
bits.  However, if a value greater than 31 is passed on a 32 bit
architecture (where long is 32 bits) the shift will result in undefined
behavior.  This was generally not an issue as the result of the undefined
shift had to exactly match hugetlb page size to proceed.

Recent improvements in runtime checking have resulted in this undefined
behavior throwing errors such as reported below.

Fix by comparing page_size_log to BITS_PER_LONG before doing shift.

Link: https://lkml.kernel.org/r/20230216013542.138708-1-mike.kravetz@oracle.com
Link: https://lore.kernel.org/lkml/CA+G9fYuei_Tr-vN9GS7SfFyU1y9hNysnf=PB7kT0=yv4MiPgVg@mail.gmail.com/
Fixes: 42d7395f ("mm: support more pagesizes for MAP_HUGETLB/SHM_HUGETLB")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Jesper Juhl <jesperjuhl76@gmail.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Nick Bowler reported another sparc64 breakage after the young/dirty
persistent work for page migration (per "Link:" below).  That's after a
similar report [2].

It turns out page migration was overlooked, and it wasn't failing before
because page migration was not enabled in the initial report test
environment.

David proposed another way [2] to fix this from sparc64 side, but that
patch didn't land somehow.  Neither did I check whether there's any other
arch that has similar issues.

Let's fix it for now as simple as moving the write bit handling to be
after dirty, like what we did before.

Note: this is based on mm-unstable, because the breakage was since 6.1 and
we're at a very late stage of 6.2 (-rc8), so I assume for this specific
case we should target this at 6.3.

[1] https://lore.kernel.org/all/20221021160603.GA23307@u164.east.ru/
[2] https://lore.kernel.org/all/20221212130213.136267-1-david@redhat.com/

Link: https://lkml.kernel.org/r/20230216153059.256739-1-peterx@redhat.com
Fixes: 2e346877 ("mm: remember young/dirty bit for page migrations")
Link: https://lore.kernel.org/all/CADyTPExpEqaJiMGoV+Z6xVgL50ZoMJg49B10LcZ=8eg19u34BA@mail.gmail.com/Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Nick Bowler <nbowler@draconx.ca>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Nick Bowler <nbowler@draconx.ca>
Cc: <regressions@lists.linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull powerpc fix from Michael Ellerman:

 - Prevent fallthrough to hash TLB flush when using radix

Thanks to Benjamin Gray and Erhard Furtner.

* tag 'powerpc-6.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Prevent fallthrough to hash TLB flush when using radix

Pull NFS client fix from Trond Myklebust:
 "Unfortunately, we found another bug in the NFSv4.2 READ_PLUS code.

  Since it has not been possible to fix the bug in time for the 6.2
  release, let's just revert the Kconfig change that enables it:

   - Revert 'NFSv4.2: Change the default KConfig value for READ_PLUS'"

* tag 'nfs-for-6.2-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  Revert "NFSv4.2: Change the default KConfig value for READ_PLUS"

Pull sound fixes from Takashi Iwai:
 "A few last-minute fixes. The significant ones are two ASoC SOF
  regression fixes while the rest are trivial HD-audio quirks.

  All are small / one-liners and should be pretty safe to take"

* tag 'sound-fix-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: SOF: Intel: hda-dai: fix possible stream_tag leak
  ALSA: hda/realtek: Enable mute/micmute LEDs and speaker support for HP Laptops
  ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.
  ALSA: hda/realtek - fixed wrong gpio assigned
  ALSA: hda: Fix codec device field initializan
  ALSA: hda/conexant: add a new hda codec SN6180
  ASoC: SOF: ops: refine parameters order in function snd_sof_dsp_update8

Pull gpio fix from Bartosz Golaszewski:

 - fix a memory leak in gpio-sim that was triggered every time libgpiod
   tests are run in user-space

* tag 'gpio-fixes-for-v6.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: fix a memory leak

Pull ata fixes from Damien Le Moal:
 "Three small fixes for 6.2 final:

   - Disable READ LOG DMA EXT for Samsung MZ7LH drives as these drives
     choke on that command, from Patrick.

   - Add Intel Tiger Lake UP{3,4} to the list of supported AHCI
     controllers (this is not technically a bug fix, but it is trivial
     enough that I add it here), from Simon.

   - Fix code comments in the pata_octeon_cf driver as incorrect
     formatting was causing warnings from kernel-doc, from Randy"

* tag 'ata-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_octeon_cf: drop kernel-doc notation
  ata: ahci: Add Tiger Lake UP{3,4} AHCI controller
  ata: libata-core: Disable READ LOG DMA EXT for Samsung MZ7LH

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix potential resource leaks in SDIO card detection error path

  MMC host:
   - jz4740: Decrease maximum clock rate to workaround bug on JZ4760(B)
   - meson-gx: Fix SDIO support to get some WiFi modules to work again
   - mmc_spi: Fix error handling in ->probe()"

* tag 'mmc-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: jz4740: Work around bug on JZ4760(B)
  mmc: mmc_spi: fix error handling in mmc_spi_probe()
  mmc: sdio: fix possible resource leaks in some error paths
  mmc: meson-gx: fix SDIO mode if cap_sdio_irq isn't set

Pull scheduler fixes from Ingo Molnar:

 - Fix user-after-free bug in call_usermodehelper_exec()

 - Fix missing user_cpus_ptr update in __set_cpus_allowed_ptr_locked()

 - Fix PSI use-after-free bug in ep_remove_wait_queue()

* tag 'sched-urgent-2023-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/psi: Fix use-after-free in ep_remove_wait_queue()
  sched/core: Fix a missed update of user_cpus_ptr
  freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL

Pull NVMe fix from Christoph:

"nvme fix for Linux 6.2

 - fix visibility of the CMB sysfs attributes (Keith Busch)"

* tag 'nvme-6.2-2022-02-17' of git://git.infradead.org/nvme:
  nvme-pci: refresh visible attrs for cmb attributes

This reverts commit 7fd461c4.

Unfortunately, it has come to our attention that there is still a bug
somewhere in the READ_PLUS code that can result in nfsroot systems on
ARM to crash during boot.

Let's do the right thing and revert this change so we don't break
people's nfsroot setups.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Fix an inverted logic bug in gpio_sim_remove_hogs() that leads to GPIO
hog structures never being freed.

Fixes: cb8c474e ("gpio: sim: new testing module")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Merge tag 'asoc-fix-v6.2-rc8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: One more fix for v6.2

One more fix from Peter which he'd very much like to get into
v6.2.

The sysfs group containing the cmb attributes is registered before the
driver knows if they need to be visible or not. Update the group when
cmb attributes are known to exist so the visibility setting is correct.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217037
Fixes: 86adbf0c ("nvme: simplify transport specific device attribute handling")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull drm fixes from Dave Airlie:
 "Just a final collection of misc fixes, the biggest disables the
  recently added dynamic debugging support, it has a regression that
  needs some bigger fixes.

  Otherwise a bunch of fixes across the board, vc4, amdgpu and vmwgfx
  mostly, with some smaller i915 and ast fixes.

  drm:
   - dynamic debug disable for now

  fbdev:
   - deferred i/o device close fix

  amdgpu:
   - Fix GC11.x suspend warning
   - Fix display warning

  vc4:
   - YUV planes fix
   - hdmi display fix
   - crtc reduced blanking fix

  ast:
   - fix start address computation

  vmwgfx:
   - fix bo/handle races

  i915:
   - gen11 WA fix"

* tag 'drm-fixes-2023-02-17' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fail atomic_check early on normalize_zpos error
  drm/amd/amdgpu: fix warning during suspend
  drm/vmwgfx: Do not drop the reference to the handle too soon
  drm/vmwgfx: Stop accessing buffer objects which failed init
  drm/i915/gen11: Wa_1408615072/Wa_1407596294 should be on GT list
  drm: Disable dynamic debug as broken
  drm/ast: Fix start address computation
  fbdev: Fix invalid page access after closing deferred I/O devices
  drm/vc4: crtc: Increase setup cost in core clock calculation to handle extreme reduced blanking
  drm/vc4: hdmi: Always enable GCP with AVMUTE cleared
  drm/vc4: Fix YUV plane handling when planes are in different buffers

The web page entry for the FPU EMULATOR no longer works.  I notified Bill
of this and he asked me to update it to this new entry.

Link: https://lkml.kernel.org/r/20230214170208.17287-1-rdunlap@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Bill Metzenthen <billm@melbpc.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

During collapse, in a few places we check to see if a given small page has
any unaccounted references.  If the refcount on the page doesn't match our
expectations, it must be there is an unknown user concurrently interested
in the page, and so it's not safe to move the contents elsewhere. 
However, the unaccounted pins are likely an ephemeral state.

In this situation, MADV_COLLAPSE returns -EINVAL when it should return
-EAGAIN.  This could cause userspace to conclude that the syscall
failed, when it in fact could succeed by retrying.

Link: https://lkml.kernel.org/r/20230125015738.912924-1-zokeefe@google.com
Fixes: 7d8faaf1 ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse")
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Reported-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

I was running traces of the read code against an RAID storage system to
understand why read requests were being misaligned against the underlying
RAID strips.  I found that the page end offset calculation in
filemap_get_read_batch() was off by one.

When a read is submitted with end offset 1048575, then it calculates the
end page for read of 256 when it should be 255.  "last_index" is the index
of the page beyond the end of the read and it should be skipped when get a
batch of pages for read in @filemap_get_read_batch().

The below simple patch fixes the problem.  This code was introduced in
kernel 5.12.

Link: https://lkml.kernel.org/r/20230208022400.28962-1-coolqyj@163.com
Fixes: cbd59c48 ("mm/filemap: use head pages in generic_file_buffered_read")
Signed-off-by: Qian Yingjin <qian@ddn.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In the fix reconnecting hash__tlb_flush() to tlb_flush() the
void return on radix__tlb_flush() was not restored and subsequently
falls through to the restored hash__tlb_flush().

Guard hash__tlb_flush() under an else to prevent this.

Fixes: 1665c027 ("powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush()")
Reported-by: "Erhard F." <erhard_f@mailbox.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230217011434.115554-1-bgray@linux.ibm.com

Merge tag 'drm-intel-fixes-2023-02-16' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Moving gen11 hw wa to the right place. (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y+47eUvwbafER35/@intel.com

Multiple fixes in vc4 to address issues with YUV planes, HDMI and CRTC;
an invalid page access fix for fbdev, mark dynamic debug as broken, a
double free and refcounting fix for vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216091905.i5wswy4dd74x4br5@houat

Merge tag 'amd-drm-fixes-6.2-2023-02-15' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.2-2023-02-15:

amdgpu:
- Fix GC11.x suspend warning
- Fix display warning
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216041122.7714-1-alexander.deucher@amd.com

Currently it's possible for a user to open CHAIN events arbitrarily,
which we previously tried to rule out in commit:

  ca2b4972 ("arm64: perf: Reject stand-alone CHAIN events for PMUv3")

Which allowed the events to be opened, but prevented them from being
scheduled by by using an arm_pmu::filter_match hook to reject the
relevant events.

The CHAIN event filtering in the arm_pmu::filter_match hook was silently
removed in commit:

  bd275681 ("perf: Rewrite core context handling")

As a result, it's now possible for users to open CHAIN events, and for
these to be installed arbitrarily.

Fix this by rejecting CHAIN events at creation time. This avoids the
creation of events which will never count, and doesn't require using the
dynamic filtering.

Attempting to open a CHAIN event (0x1e) will now be rejected:

| # ./perf stat -e armv8_pmuv3/config=0x1e/ ls
| perf
|
|  Performance counter stats for 'ls':
|
|    <not supported>      armv8_pmuv3/config=0x1e/
|
|        0.002197470 seconds time elapsed
|
|        0.000000000 seconds user
|        0.002294000 seconds sys

Other events (e.g. CPU_CYCLES / 0x11) will open as usual:

| # ./perf stat -e armv8_pmuv3/config=0x11/ ls
| perf
|
|  Performance counter stats for 'ls':
|
|            2538761      armv8_pmuv3/config=0x11/
|
|        0.002227330 seconds time elapsed
|
|        0.002369000 seconds user
|        0.000000000 seconds sys

Fixes: bd275681 ("perf: Rewrite core context handling")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230216141240.3833272-3-mark.rutland@arm.comSigned-off-by: Will Deacon <will@kernel.org>