as-instr uses KBUILD_AFLAGS, but as-option uses KBUILD_CFLAGS. This can
cause as-option to fail unexpectedly when CONFIG_WERROR is set, because
clang will emit -Werror,-Wunused-command-line-argument for various -m
and -f flags in KBUILD_CFLAGS for assembler sources.

Callers of as-option and as-instr should be adding flags to
KBUILD_AFLAGS / aflags-y, not KBUILD_CFLAGS / cflags-y. Use
KBUILD_AFLAGS in all macros to clear up the initial problem.

Unfortunately, -Wunused-command-line-argument can still be triggered
with clang by the presence of warning flags or macro definitions because
'-x assembler' is used, instead of '-x assembler-with-cpp', which will
consume these flags. Switch to '-x assembler-with-cpp' in places where
'-x assembler' is used, as the compiler is always used as the driver for
out of line assembler sources in the kernel.

Finally, add -Werror to these macros so that they behave consistently
whether or not CONFIG_WERROR is set.

[nathan: Reworded and expanded on problems in commit message
         Use '-x assembler-with-cpp' in a couple more places]

Link: https://github.com/ClangBuiltLinux/linux/issues/1699Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

A future change will switch as-option to use KBUILD_AFLAGS instead of
KBUILD_CFLAGS to allow clang to drop -Qunused-arguments, which may cause
issues if the flag being tested requires a flag previously added to
KBUILD_CFLAGS but not KBUILD_AFLAGS. Use cc-option for cflags additions
so that the flags are tested properly.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

-Wa,-msoft-float is tested with as-option, which will be a problem for
clang with an upcoming change to move as-option to use KBUILD_AFLAGS
instead of KBUILD_CFLAGS due to a lack of '-mno-abicalls' in
KBUILD_AFLAGS at the point that this check occurs; $(cflags-y) is added
to KBUILD_AFLAGS towards the end of this file.

  clang: error: ignoring '-fno-PIE' option as it cannot be used with implicit usage of -mabicalls and the N64 ABI [-Werror,-Woption-ignored]

This could be resolved by switching to a cc-option check but
'$(cflags-y)' would need to be added so that '-mno-abicalls' is present
for the test. However, this check is no longer necessary, as
-msoft-float is supported by all supported assembler versions (GNU as
2.25+ and LLVM 11+). Eliminate GAS_HAS_SET_HARDFLOAT and all of its
uses, inlining SET_HARDFLOAT where necessary.

Link: https://lore.kernel.org/202209101939.bvk64Fok-lkp@intel.com/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

as-option tests new options using KBUILD_CFLAGS, which causes problems
when using as-option to update KBUILD_AFLAGS because many compiler
options are not valid assembler options.

This will be fixed in a follow up patch. Before doing so, move the
assembler test for -Wa,-mrelax-relocations=no from using as-option to
cc-option.

Link: https://lore.kernel.org/llvm/CAK7LNATcHt7GcXZ=jMszyH=+M_LC9Qr6yeAGRCBbE6xriLxtUQ@mail.gmail.com/Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If the kheaders archive generation is interrupted then this directory
may be left on disk and not ignored by git.
By using the standard naming schema for temporary files and directories
the default .gitignore and "make clean" rules will apply.
Suggested-by: Nicolas Schier <nicolas@fjasle.eu>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Reuse the standard naming schema for temporary files also for temporary
directories.

Such a directory will be used by the kheaders generation.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Adding any rst quoting seems to be controversial, but at least try to
unify the existing quoting a bit, without adding new ones.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Remove the leading whitespaces, and clean up indentation and whitespace
in general.

Although the diff looks massive, it's trivial with 'diff -w' or 'git
show -w'.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Drop the manually updated section numbering. It's hard to maintain, and
indeed hasn't been updated when sections 3.4 and 7.8 were dropped.

Update all the section references to rst references.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This is not something that should be manually updated.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The "Kbuild syntax for exported headers" section should not be under
"Architecture Makefiles" in hierarchy. Bump the header underline from
"-" to "=".
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The MAINTAINERS repository entry specifies "kconfig" as the branch, but
the repository itself has "kbuild".
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

$(tmp-target) is a better fit for local use like this.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

scripts/ is a better place to generate files used treewide.

With target.json moved to scripts/, you do not need to add target.json
to no-clean-files or MRPROPER_FILES.

'make clean' does not visit scripts/, but 'make mrproper' does.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>

fixdep is designed only for parsing text files. read_file() appends
a terminating null byte ('\0') and parse_config_file() calls strstr()
to search for CONFIG options.

rustc outputs *.rlib, *.rmeta, *.so to dep-info. fixdep needs them in
the dependency, but there is no point in parsing such binary files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>

The dep files (*.d files) emitted by C compilers usually contain the
deduplicated list of included files.

One exceptional case is when a header is included by the -include
command line option, and also by #include directive.

For example, the top Makefile adds the command line option,
"-include $(srctree)/include/linux/kconfig.h". You do not need to
include <linux/kconfig.h> in every source file.

In fact, include/linux/kconfig.h is listed twice in many .*.cmd files
due to include/linux/xarray.h having "#include <linux/kconfig.h>".
I did not fix that since it is a small redundancy.

However, this is more annoying for rustc. rustc emits the dependency
for each emission type.

For example, cmd_rustc_library emits dep-info, obj, and metadata.
So, the emitted *.d file contains the dependency for those 3 targets,
which makes fixdep parse the same file 3 times.

  $ grep rust/alloc/raw_vec.rs rust/.alloc.o.cmd
    rust/alloc/raw_vec.rs \
    rust/alloc/raw_vec.rs \
    rust/alloc/raw_vec.rs \

To skip the second parsing, this commit adds a hash table for parsed
files, just like we did for CONFIG options.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>

Change the hash table code so it will be easier to add the second table.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>

rustc may put comments in dep-info, so sed is used to drop them before
passing it to fixdep.

Now that fixdep can remove comments, Makefiles do not need to run sed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>

fixdep parses dependency files (*.d) emitted by the compiler.

*.d files are Makefiles describing the dependencies of the main source
file.

fixdep understands minimal Makefile syntax. It works well enough for
GCC and Clang, but not for rustc.

This commit improves the parser a little more for better processing
comments, escape sequences, etc.

My main motivation is to drop comments. rustc may output comments
(e.g. env-dep). Currentyly, rustc build rules invoke sed to remove
comments, but it is more efficient to do it in fixdep.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>

In Kbuild, two different rules must not write to the same file, but
it happens when compiling rust source files.

For example, set CONFIG_SAMPLE_RUST_MINIMAL=m and run the following:

  $ make -j$(nproc) samples/rust/rust_minimal.o samples/rust/rust_minimal.rsi \
                    samples/rust/rust_minimal.s samples/rust/rust_minimal.ll
    [snip]
    RUSTC [M] samples/rust/rust_minimal.o
    RUSTC [M] samples/rust/rust_minimal.rsi
    RUSTC [M] samples/rust/rust_minimal.s
    RUSTC [M] samples/rust/rust_minimal.ll
  mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
  make[3]: *** [scripts/Makefile.build:334: samples/rust/rust_minimal.ll] Error 1
  make[3]: *** Waiting for unfinished jobs....
  mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
  make[3]: *** [scripts/Makefile.build:309: samples/rust/rust_minimal.o] Error 1
  mv: cannot stat 'samples/rust/rust_minimal.d': No such file or directory
  make[3]: *** [scripts/Makefile.build:326: samples/rust/rust_minimal.s] Error 1
  make[2]: *** [scripts/Makefile.build:504: samples/rust] Error 2
  make[1]: *** [scripts/Makefile.build:504: samples] Error 2
  make: *** [Makefile:2008: .] Error 2

The reason for the error is that 4 threads running in parallel renames
the same file, samples/rust/rust_minimal.d.

This does not happen when compiling C or assembly files because
-Wp,-MMD,$(depfile) explicitly specifies the dependency filepath.
$(depfile) is a unique path for each target.

Currently, rustc is only given --out-dir and --emit=<list-of-types>
So, all the rust build rules output the dep-info into the default
<CRATE_NAME>.d, which causes the path conflict.

Fortunately, the --emit option is able to specify the output path
individually, with the form --emit=<type>=<path>.

Add --emit=dep-info=$(depfile) to the common part. Also, remove the
redundant --out-dir because the output path is specified for each type.

The code gets much cleaner because we do not need to rename *.d files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>

Remove _host*_flags. No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>

cmd_dt_S_dtb and cmd_dt_S_dtbo are almost the same; the only difference
is the prefix of the begin/end symbols. (__dtb vs __dtbo)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

The cmd-check for KBUILD_NOCMDDEP=1 may not be clear until you see
commit c4d5ee13 ("kbuild: make KBUILD_NOCMDDEP=1 handle empty
built-in.o").

When a phony target (i.e. FORCE) is the only prerequisite, Kbuild
uses a tricky way to detect that the target does not exist.

Add more comments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

The cmd-check macro compares $(cmd_$@) and $(cmd_$1), but a pitfall is
that you cannot use cmd_<target> as the variable name for the command.

For example, the following code will not work in the top Makefile
or ./Kbuild.

    quiet_cmd_foo = GEN     $@
          cmd_foo = touch $@

    targets += foo
    foo: FORCE
            $(call if_changed,foo)

In this case, both $@ and $1 are expanded to 'foo', so $(cmd_check)
is always empty.

We do not need to use the same prefix for cmd_$@ and cmd_$1.
Rename the former to savedcmd_$@.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

The top .gitignore comments about how to detect files breaking
.gitignore rules, but people rarely care about it.

Add a new W=1 warning to detect files that are tracked but ignored by
git. If git is not installed or the source tree is not tracked by git
at all, this script does not print anything.

Running it on v6.2-rc1 detected the following:

  $ make W=1 misc-check
  Documentation/devicetree/bindings/.yamllint: warning: ignored by one of the .gitignore files
  drivers/clk/.kunitconfig: warning: ignored by one of the .gitignore files
  drivers/gpu/drm/tests/.kunitconfig: warning: ignored by one of the .gitignore files
  drivers/hid/.kunitconfig: warning: ignored by one of the .gitignore files
  fs/ext4/.kunitconfig: warning: ignored by one of the .gitignore files
  fs/fat/.kunitconfig: warning: ignored by one of the .gitignore files
  kernel/kcsan/.kunitconfig: warning: ignored by one of the .gitignore files
  lib/kunit/.kunitconfig: warning: ignored by one of the .gitignore files
  mm/kfence/.kunitconfig: warning: ignored by one of the .gitignore files
  tools/testing/selftests/arm64/tags/.gitignore: warning: ignored by one of the .gitignore files
  tools/testing/selftests/arm64/tags/Makefile: warning: ignored by one of the .gitignore files
  tools/testing/selftests/arm64/tags/run_tags_test.sh: warning: ignored by one of the .gitignore files
  tools/testing/selftests/arm64/tags/tags_test.c: warning: ignored by one of the .gitignore files

These are ignored by the '.*' or 'tags' in the top .gitignore, but
there is no rule to negate it.

You might be tempted to do 'git add -f' but I want to have the real
issue fixed (by fixing a .gitignore, or by renaming files, etc.).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Recent git versions do not accept the noted command.

  $ git ls-files -i --exclude-standard
  fatal: ls-files -i must be used with either -o or -c

The -c was implied before, but we need to make it explicit since
git commit b338e9f66873 ("ls-files: error out on -i unless -o or -c
are specified").

Also, replace --exclude-standard with --exclude-per-directory=.gitignore
so that everyone will get consistent results.

git-ls-files(1) says:

  --exclude-standard
      Add the standard Git exclusions: .git/info/exclude, .gitignore in
      each directory, and the user's global exclusion file.

We cannot predict what is locally added to .git/info/exclude or the
user's global exclusion file.

We can only manage .gitignore files committed to the repository.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>

More than one year has passed since the copied *.[cS] files were
removed from arch/*/boot/compressed/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The top Makefile sets KBUILD_VERBOSE to 0 by default, it looks weird
now because V=1 and V=2 can be OR'ed as V=12. The default should be
empty.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Commit a6de553d ("kbuild: Allow to combine multiple W= levels")
supported W=123 to enable all the extra warning groups.

I think a similar idea is applicable to the V= option.

  V=1 echos the whole command
  V=2 prints the reason for rebuilding

These are orthogonal, and can be enabled at the same time.

This commit supports V=12 to enable both of them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Some scripts increase the verbose level when V=1, but others when
not V=0.

I think the former is correct because V=2 is not a log level but
a switch to print the reason for rebuilding.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

"make V=1" prints the whole command instead of the short log, but I
think it is nicer to print both so that you can easily spot the build
rule of your interest.

This commit changes V=1 to print the short log (the line starts with
'#'), followed by the full log.

In parallel builds, the short/full logs from the same build rule may
be interspersed. If you want to avoid it, please add -Otarget option.
Kbuild will never set it by default because Make would buffer the logs
and lose the escape sequences. (Modern compilers print warnings and
errors in color, but only when they write to a terminal.)

This is also a preparation for supporting V=12 because V=2 appends the
reason for rebuilding to the short log.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Factor out $(findstring s,...).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Pull another io_uring fix from Jens Axboe:
 "Just a single fix for a regression that happened in this release due
  to a poll change. Normally I would've just deferred it to next week,
  but since the original fix got picked up by stable, I think it's
  better to just send this one off separately.

  The issue is around the poll race fix, and how it mistakenly also got
  applied to multishot polling. Those don't need the race fix, and we
  should not be doing any reissues for that case. Exhaustive test cases
  were written and committed to the liburing regression suite for the
  reported issue, and additions for similar issues"

* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
  io_uring/poll: don't reissue in case of poll race on multishot request

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc and other subsystem driver fixes for
  6.2-rc5 to resolve a few reported issues. They include:

   - long time pending fastrpc fixes (should have gone into 6.1, my
     fault)

   - mei driver/bus fixes and new device ids

   - interconnect driver fixes for reported problems

   - vmci bugfix

   - w1 driver bugfixes for reported problems

  Almost all of these have been in linux-next with no reported problems,
  the rest have all passed 0-day bot testing in my tree and on the
  mailing lists where they have sat too long due to me taking a long
  time to catch up on my pending patch queue"

* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  VMCI: Use threaded irqs instead of tasklets
  misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
  gsmi: fix null-deref in gsmi_get_variable
  misc: fastrpc: Fix use-after-free race condition for maps
  misc: fastrpc: Don't remove map on creater_process and device_release
  misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
  misc: fastrpc: fix error code in fastrpc_req_mmap()
  mei: me: add meteor lake point M DID
  mei: bus: fix unlink on bus in error path
  w1: fix WARNING after calling w1_process()
  w1: fix deadloop in __w1_remove_master_device()
  comedi: adv_pci1760: Fix PWM instruction handling
  interconnect: qcom: rpm: Use _optional func for provider clocks
  interconnect: qcom: msm8996: Fix regmap max_register values
  interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
  dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC

Pull driver core fixes from Greg KH:
 "Here are three small driver and kernel core fixes for 6.2-rc5. They
  include:

   - potential gadget fixup in do_prlimit

   - device property refcount leak fix

   - test_async_probe bugfix for reported problem"

* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  prlimit: do_prlimit needs to have a speculation check
  driver core: Fix test_async_probe_init saves device in wrong array
  device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 6.2-rc5. It resolves a build
  issue reported and Fixed by Arnd in the vc04_services driver. It's
  been in linux-next this week with no reported problems"

* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vchiq_arm: fix enum vchiq_status return types

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.2-rc5 that
  resolve a number of tiny reported issues and some new device ids. They
  include:

   - new device id for the exar serial driver

   - speakup tty driver bugfix

   - atmel serial driver baudrate fixup

   - stm32 serial driver bugfix and then revert as the bugfix broke the
     build. That will come back in a later pull request once it is all
     worked out properly.

   - amba-pl011 serial driver rs486 mode bugfix

   - qcom_geni serial driver bugfix

  Most of these have been in linux-next with no reported problems (well,
  other than the build breakage which generated the revert), the new
  device id passed 0-day testing"

* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: exar: Add support for Sealevel 7xxxC serial cards
  Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
  tty: serial: qcom_geni: avoid duplicate struct member init
  serial: atmel: fix incorrect baudrate setup
  tty: fix possible null-ptr-defer in spk_ttyio_release
  serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  serial: amba-pl011: fix high priority character transmission in rs486 mode
  serial: pch_uart: Pass correct sg to dma_unmap_sg()
  tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are a number of small USB and Thunderbolt driver fixes and new
  device id changes for 6.2-rc5. Included in here are:

   - thunderbolt bugfixes for reported problems

   - new usb-serial driver ids added

   - onboard_hub usb driver fixes for much-reported problems

   - xhci bugfixes

   - typec bugfixes

   - ehci-fsl driver module alias fix

   - iowarrior header size fix

   - usb gadget driver fixes

  All of these, except for the iowarrior fix, have been in linux-next
  with no reported issues. The iowarrior fix passed the 0-day testing
  and is a one digit change based on a reported problem in the driver
  (which was written to a spec, not the real device that is now
  available)"

* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
  usb: host: ehci-fsl: Fix module alias
  usb: dwc3: fix extcon dependency
  usb: core: hub: disable autosuspend for TI TUSB8041
  USB: fix misleading usb_set_intfdata() kernel doc
  usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
  USB: gadget: Add ID numbers to configfs-gadget driver names
  usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
  usb: gadget: g_webcam: Send color matching descriptor per frame
  usb: typec: altmodes/displayport: Use proper macro for pin assignment check
  usb: typec: altmodes/displayport: Fix pin assignment calculation
  usb: typec: altmodes/displayport: Add pin assignment helper
  usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
  usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
  usb: misc: onboard_hub: Move 'attach' work to the driver
  usb: misc: onboard_hub: Invert driver registration order
  usb: ucsi: Ensure connector delayed work items are flushed
  usb: musb: fix error return code in omap2430_probe()
  usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
  xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
  ...

Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
   messages when GNU Make 4.4 is used.

 - Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.

 - Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.

 - Support GNU Make 4.4 for scripts/jobserver-exec.

 - Show clearer error message when kernel/gen_kheaders.sh fails due to
   missing cpio.

* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: explicitly validate existence of cpio command
  scripts: support GNU make 4.4 in jobserver-exec
  kconfig: Update all declared targets
  scripts: rpm: make clear that mkspec script contains 4.13 feature
  init/Kconfig: fix LOCALVERSION_AUTO help text
  kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
  kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
  init/version-timestamp.c: remove unneeded #include <linux/version.h>
  docs: kbuild: remove mention to dropped $(objtree) feature