- 13 May, 2022 40 commits
-
-
Eugen Hristev authored
In s_fmt_vid_cap, we should check if vb2_is_busy and return EBUSY, not check if it's streaming to return the busy state. Suggested-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Eugen Hristev authored
During experiments with libcamera, it looks like vb2_is_streaming returns true before our start streaming is called. Order of operations is streamon -> queue -> start_streaming ISC would have started the DMA immediately when a buffer is being added to the vbqueue if the queue is streaming. It is more safe to start the DMA after the start streaming of the driver is called. Thus, even if vb2queue is streaming, add the buffer to the dma queue of the driver instead of actually starting the DMA process, if the start streaming has not been called yet. Tho achieve this, we have to use vb2_start_streaming_called instead of vb2_is_streaming. Signed-off-by:
-
Michael Rodin authored
The vertical subsampling factor is currently not considered in the offset calculation for plane cropping done in rpf_configure_partition. This causes a distortion (shift of the color plane) when formats with the vsub factor larger than 1 are used (e.g. NV12, see vsp1_video_formats in vsp1_pipe.c). This commit considers vsub factor for all planes except plane 0 (luminance). Drop generalization of the offset calculation to reduce the binary size. Fixes: e5ad37b6 ("[media] v4l: vsp1: Add cropping support") Signed-off-by:
Michael Rodin <mrodin@de.adit-jv.com> Signed-off-by:
LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Use the new vb2_queue_is_busy() helper to replace the open-coded version. Signed-off-by:
-
Laurent Pinchart authored
Use the vb2_fop_release() helper to replace the open-coded version. The video->lock is assigned to the queue lock, used by vb2_fop_release(), so the only functional difference is that v4l2_fh_release() is now called before vsp1_device_put(). This should be harmless. Signed-off-by:
-
Laurent Pinchart authored
vb2 queue ownership is managed by the ioctl handler helpers (vb2_ioctl_*). There are however use cases where drivers can benefit from checking queue ownership, for instance when open-coding an ioctl handler that needs to perform additional checks before calling the corresponding vb2 operation. Expose the vb2_queue_is_busy() function in the videobuf2-v4l2.h header, and change its first argument to a struct vb2_queue pointer as the function name implies it operates on a queue, not a video_device. Signed-off-by:
-
Laurent Pinchart authored
Replace the driver-specific definitions of MIPI CSI-2 data types with macros from mipi-csi2.h. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by:
-
Laurent Pinchart authored
Replace the hardcoded MIPI CSI-2 data types with macros from mipi-csi2.h. Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by gcc 12.1: drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c: In function 'ia_css_rmgr_acq_vbuf': drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c:275:33: error: storing the address of local variable 'h' in '*handle' [-Werror=dangling-pointer=] 275 | *handle = &h; | ~~~~~~~~^~~~ drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c:257:40: note: 'h' declared here 257 | struct ia_css_rmgr_vbuf_handle h; | ^ drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c:257:40: note: 'handle' declared here cc1: all warnings being treated as errors The logic uses a temporary struct to update the handler, but, instead of copying the value to the pointer sent by the caller, it replaces it with the content with a local variable. That's wrong, and may lead the caller to use a weird value. Signed-off-by: -
Ming Qian authored
the output buffer count should >= min_buffer_out the capture buffer count should >= min_buffer_cap Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
-
Tom Rix authored
In stk_camera_read_reg() a single byte buffer is alloc-ed and freed on every function call. Since the size is known, move the buffer to the struct stk_camera where it will be alloc-ed and freed once. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Philipp Zabel authored
Let VIDIOC_ENUM_FRAMEINTERVALS return -EINVAL if userspace queries frame intervals for frame sizes unsupported by the encoder. Fixes the following v4l2-compliance failure: fail: v4l2-test-formats.cpp(123): found frame intervals for invalid size 47x16 fail: v4l2-test-formats.cpp(282): node->codec_mask & STATEFUL_ENCODER test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL [hverkuil: drop incorrect 'For decoder devices, return -ENOTTY.' in the commit log] Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Set default colorspace to SRGB for JPEG encoder and decoder devices, to fix the following v4l2-compliance test failure: test VIDIOC_TRY_FMT: OK fail: v4l2-test-formats.cpp(818): fmt_raw.g_colorspace() != V4L2_COLORSPACE_SRGB Also explicitly set transfer function, YCbCr encoding and quantization range, as required by v4l2-compliance for the JPEG encoded side. Signed-off-by:
-
Yang Yingliang authored
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by:
-
Yang Yingliang authored
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by:
-
Christopher Obbard authored
Document the RK3328 compatible for rockchip-vdec. The driver shares the same base functionality as the RK3399 hardware so make sure that the RK3399 compatible is also included in the device tree. Signed-off-by:
Christopher Obbard <chris.obbard@collabora.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Fabio Estevam authored
The video viu driver is not a vital one for booting purposes. Remove the unneeded 'default y' option. Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Dorota Czaplejewicz authored
I tried to debug streaming in libcamera, where I stumbled upon this. I asked around on IRC where I was told that this statement in the documentation is wrong, so I'm submitting a removal. Signed-off-by:
Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Signed-off-by:
-
Lv Ruyi authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by:
-
Ming Qian authored
The typical behavior is to add all controls, then at the end check if hdl->error was set, and if so, v4l2_ctrl_handler_free is called and the error is returned. Signed-off-by:
-
Ming Qian authored
For some invalid frames, especially multiple consecutive invalid frames, they all can't be decoded, then the firmware can send picture skipped event to notify driver that some frames are invalid, driver can return them with error flag. Signed-off-by:
-
Ming Qian authored
copy the timestamp using the helper function V4L2_BUF_FLAG_TIMESTAMP_COPY To implement this, driver will keep the output buffer until it's encoded, in previous, driver will return the output buffer immediately after firmware return it Signed-off-by:
-
Ming Qian authored
copy the timestamp using the helper function V4L2_BUF_FLAG_TIMESTAMP_COPY To implement this, driver will keep the output buffer until it's decoded, in previous, driver will return the output buffer immediately after copying data to stream buffer. After that, there is no need to make a workaround for poll function. driver can use v4l2_m2m_fop_poll directly. Also, driver don't need to keep a input threshold as the buffer count is up to only 32. Signed-off-by:
-
Randy Dunlap authored
Fix build errors when RADIO_TEA575X=y, VIDEO_BT848=m, and VIDEO_DEV=m. The build errors occur due to [in drivers/media/Makefile]: obj-$(CONFIG_VIDEO_DEV) += radio/ so the (would be) builtin tea575x.o is not being built. This is also due to drivers/media/radio/Kconfig declaring a bool Kconfig symbol (RADIO_ADAPTERS) that depends on a tristate (VIDEO_DEV), so when VIDEO_DEV=m, RADIO_ADAPTERS becomes =y, and then the drivers that depend on RADIO_ADPATERS can be configured as builtin (=y) or as loadable modules (=m). Fix this by converting RADIO_ADAPTERS to a tristate symbol instead of a bool symbol. Fixes these build errors: ERROR: modpost: "snd_tea575x_hw_init" [drivers/media/pci/bt8xx/bttv.ko] undefined! ERROR: modpost: "snd_tea575x_set_freq" [drivers/media/pci/bt8xx/bttv.ko] undefined! ERROR: modpost: "snd_tea575x_s_hw_freq_seek" [drivers/media/pci/bt8xx/bttv.ko] undefined! ERROR: modpost: "snd_tea575x_enum_freq_bands" [drivers/media/pci/bt8xx/bttv.ko] undefined! ERROR: modpost: "snd_tea575x_g_tuner" [drivers/media/pci/bt8xx/bttv.ko] undefined! Link: lore.kernel.org/r/202204191711.IKJJFjgU-lkp@intel.com Fixes: 9958d30f ("media: Kconfig: cleanup VIDEO_DEV dependencies") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Pavel Skripkin authored
Syzbot reported that -1 is used as array index. The problem was in missing validation check. hdw->unit_number is initialized with -1 and then if init table walk fails this value remains unchanged. Since code blindly uses this member for array indexing adding sanity check is the easiest fix for that. hdw->workpoll initialization moved upper to prevent warning in __flush_work. Reported-and-tested-by: syzbot+1a247e36149ffd709a9b@syzkaller.appspotmail.com Fixes: d855497e ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
-
Niklas Söderlund authored
Remove a stray blank line between function definition and body. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
-
Sebastian Fricke authored
Describe the coding tree unit as replacement for the macroblock in the HEVC codec. Highlight a key difference of the HEVC codec to predecessors like AVC(H.264) to give a better overview of the differences between the coding standards. [hverkuil: replaced the 'corresponds to' symbol with the full text for clarity] Signed-off-by:
Sebastian Fricke <sebastian.fricke@collabora.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Sebastian Fricke authored
VP9 support has been added to the driver by commit f25709c4 ("media: rkvdec: Add the VP9 backend"). And the VP9 uABI was merged with commit b88dbe38 ("media: uapi: Add VP9 stateless decoder controls"). The remaining codec that keeps this driver in staging is HEVC. Update the TODO list accordingly. Signed-off-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Sebastian Fricke authored
VP8 has been added to the uABI by commit 363240ce ("media: uapi: move VP8 stateless controls out of staging") VP9 has been added to the uABI by commit b88dbe38 ("media: uapi: Add VP9 stateless decoder controls") H264 has been added to the uABI by commit 46a309d2 ("media: uapi: move H264 stateless controls out of staging") The last remaining codec to be added to the uABI is HEVC. Highlight these changes in the TODO list. Signed-off-by:
-
Sebastian Fricke authored
Fix typos in comments within the Hantro driver. Signed-off-by:
-
Hangyu Hua authored
rga->m2m_dev needs to be freed when rga_probe fails. Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Signed-off-by:
-
Ming Qian authored
To support dynamic resolution change, driver should meet the following conditions: 1. the previous pictures are all decoded before source change event. 2. prevent decoding new resolution pictures with incorrect capture buffer, until user handle source change event and setup capture. 3. report correct fmt and resolution during source change. Signed-off-by:
Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by:
-
Ming Qian authored
Refine code to support dynamic resolution change Signed-off-by:
-
Ming Qian authored
The GStreamer v4l2videodec only ever calls S_FMT on the output side and then expects G_FMT on the capture side to return a valid format. Signed-off-by:
-
Ming Qian authored
The decoder will save the precision that was detected from jpeg header and use it later, when choosing the pixel format and also calculate bytesperline according to precision. The 12bit jpeg is not supported yet, but driver shouldn't led to serious problem if user enqueue a 12 bit jpeg. And the 12bit jpeg is supported by hardware, driver may support it later. [hverkuil: document the new precision field] Signed-off-by:
-
Ming Qian authored
Refine code to support dynamic resolution change Signed-off-by:
-
Husni Faiz authored
This patch fixes "space prohibited before that ':'" checkpatch error in the switch statements. Suggested-by:
Husni Faiz <ahamedhusni73@gmail.com> Signed-off-by:
-
Husni Faiz authored
This patch fixes "switch and case should be at the same indent" checkpatch error. Signed-off-by:
-
Tom Rix authored
Clang static analysis reports this issue ispcsiphy.c:63:14: warning: The left operand of '<<' is a garbage value reg |= mode << shift; ~~~~ ^ The iface switch-statement default case falls through to ISP_INTERFACE_CCP2B_PHY1. Which is later checked to set the mode. Since the default case is left out of this check mode is never set. Instead of falling through and assuming a ISP_INTERFACE_CCP2B_PHY1 iface, return. Signed-off-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
