- 25 Aug, 2016 1 commit
-
-
Salil authored
In the Hip06 SoC, the RoCE Engine is part of the Hisilicon Network Subsystem and is dependent upon DSAF module. Therefore, certain functions like RESET are exposed through the common registers of HNS DSAF module which are memory-mapped by the HNS driver and currently can only be accessed through DT/syscon interface. This patch adds the support of ACPI to the existing RoCE reset function in the HNS driver(please refer NOTE 2). Hisilicon RoCE driver (please refer NOTE 1) shall call this reset function during probe time to reset the RoCE Engine. The HNS Reset function indirectly ends up in calling the _DSM() function part of the DSDT ACPI Table. Actual reset functionality for ACPI is implemented within the ACPI DSDT Table which also has been enhanced to support this change. Support of ACPI in the HNS RoCE driver shall be pushed through a different accompanying below patch: "IB/hns: Add support of ACPI to the Hisilicon RoCE Driver" NOTE 1: HNS RoCE driver has already been accepted by its maintainer Doug Ledford<dledford@redhat.com>. Please refer below link: https://www.spinics.net/lists/linux-rdma/msg38850.html NOTE 2: RoCE reset function patch has been accepted and now is part of the net-next: https://www.mail-archive.com/netdev@vger.kernel.org/msg123867.htmlSigned-off-by:
Salil Mehta <salil.mehta@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
- 22 Aug, 2016 5 commits
-
-
Wei Yongjun authored
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
-
oulijun authored
This patch added maintainers for RoCE driver. Signed-off-by:
Wei Hu <xavier.huwei@huawei.com> Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
oulijun authored
This patch added Kconfig and Makefile for building RoCE module. Signed-off-by:
Nenglong Zhao <zhaonenglong@hisilicon.com> Signed-off-by:
-
oulijun authored
These are the various new source code files for the Hisilicon RoCE driver for ARM architecture. Signed-off-by:
-
oulijun authored
This patch added DTS binding document for Hisilicon RoCE driver. Signed-off-by:
-
- 21 Aug, 2016 16 commits
-
-
David S. Miller authored
This reverts commit 5ab1fe72. This change still has problems. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Simplify the return expression. Signed-off-by:
-
Gao Feng authored
Use PPP_ALLSTATIONS, PPP_UI, and SEND_SHUTDOWN instead of 0xff, 0x03, and 2 separately. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy_dev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-08-20 This series contains updates to ixgbe and ixgbevf. Veola fixes how the backplane reports the media in ethtool, as KR, KX or KX4 based on the backplane interface present. Emil fixes ixgbevf since an incorrect size parameter for ixgbevf_write_msg_read_ack() ended up only giving the PF the first 4 bytes of the MAC address, so correct the size by calculating it on the fly for all instances where we call ixgbevf_write_msg_read_ack(). Added geneve receive offload support for x550em_a. Don fixes the LED interface for x557 since it uses a different interface. Added support for the new x557 copper device. ==================== Signed-off-by: -
Don Skidmore authored
This patch adds support for the new copper device X557. Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This shouldn't matter as nothing should be attached still to be consisted control MDIO speed for these devices as well. Signed-off-by:
-
Don Skidmore authored
The X557 devices use a different interface to the LED for the port. This patch reflect that change. Signed-off-by:
-
Emil Tantilov authored
Add geneve Rx offload support for x550em_a. The implementation follows the vxlan code with the lower 16 bits of the VXLANCTRL register holding the UDP port for VXLAN and the upper for Geneve. Disabled NFS filters in the RFCTL register which allows us to simplify the check for VXLAN and Geneve packets in ixgbe_rx_checksum(). Removed vxlan from the name of the callback functions and replaced it with udp_tunnel which is more in line with the new API. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
-
Emil Tantilov authored
The PF driver was only receiving the first 4 bytes of the MAC due to an incorrect size parameter for ixgbevf_write_msg_read_ack() in ixgbevf_set_rar_vf(). Correct the size by calculating it on a fly for all instances where we call ixgbevf_write_msg_read_ack() Signed-off-by:
-
Veola Nazareth authored
ethtool reports backplane type interfaces as 1000/10000baseT link modes. This has been corrected to report the media as KR, KX or KX4 based on the backplane interface present. Signed-off-by:
Veola Nazareth <veola.nazareth@intel.com> Tested-by:
-
David S. Miller authored
Markus Elfring says: ==================== tun: Fine-tuning for update_filter() A few update suggestions were taken into account from static source code analysis. ==================== Signed-off-by: -
Markus Elfring authored
Adjust a jump target according to the Linux coding style convention. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-08-19 This series contains updates to i40e and i40evf only. Jake provides several patches, first just moves a function to co-locate the two functions related to configuring RSS via the admin queue, which should help in spotting bugs when comparing the two functions. Fixed an issue where commit e69ff813 ("i40e: rework the functions to configure RSS with similar parameters") missed checking whether the seed is NULL before using it and did not use the passed in *lut parameter. Fixed an issue where a previous refactor missed i40e_vsi_config_rss() and the values were being ignored, so checked for the fields and used them instead of default values. Lastly replaced calls to create_singlethread_workqueue() with alloc_workqueue() to provide more control over workqueue creation and allows explicit setting of the desired mode of operation. Mitch adds link speed to log messages and reports speed through ethtool. Carolyn refactors tail bump check and fixes byte ordering problems found when enabling this feature support. Adds support for HMC resources and profile commands for x722 firmware. Heinrich Schuchardt fixes format identifiers from %u to %d since the variable is defined as an integer. Catherine fixes an issue where there was a race condition between the completion of the client open and calls to the client ops, so ensured that client ops are not called until we are sure client is open. Harshitha makes sure that i40e_client_release() does not try to use an adapter pointer which may not be initialized, so make sure it is. Joe Perches fixes the use of the local macro XSTRINGIFY() to use __stringify() instead. Avinash corrects the mutex usage in client_subtask(). Fixed the RDMA client to open again after reset since it is closed during a PF reset. Jeff (me) clean up whitespace issues, where indentation was done inconsistently and with spaces versus tabs. ==================== Signed-off-by:
-
- 20 Aug, 2016 18 commits
-
-
William Tu authored
The patch creates sample code exercising bpf_skb_{set,get}_tunnel_key, and bpf_skb_{set,get}_tunnel_opt for GRE, VXLAN, and GENEVE. A native tunnel device is created in a namespace to interact with a lwtunnel device out of the namespace, with metadata enabled. The bpf_skb_set_* program is attached to tc egress and bpf_skb_get_* is attached to egress qdisc. A ping between two tunnels is used to verify correctness and the result of bpf_skb_get_* printed by bpf_trace_printk. Signed-off-by:William Tu <u9012063@gmail.com> Signed-off-by:
-
Haiyang Zhang authored
The existing code uses busy retry when unable to send out receive completions due to full ring buffer. It also gives up retrying after limit is reached, and causes receive buffer slots not being recycled. This patch implements batching of receive completions. It also prevents dropping receive completions due to full ring buffer. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Avinash Dayanand authored
RDMA client is closed during the PF reset and needs to be opened again. Setting the flag so that RDMA client is opened in watchdog() function. Change-ID: I507b1e4cbd05528cdff68fd360ef3dcac8901263 Signed-off-by:
Avinash Dayanand <avinash.dayanand@intel.com> Tested-by:
-
Jeff Kirsher authored
Several defines and code comments were indented with spaces instead of tabs, correct the issue to make indentation consistent. Change-ID: I0dc6bbb990ec4a9e856acc9ec526d876181f092c Signed-off-by:
-
Avinash Dayanand authored
Correcting the mutex usage, in client_subtask(), mutex_unlock has to be called just before client_del_instance() since this function opens and later closes the same mutex again. Similarly in client_is_registered removing the mutex since it closes the mutex twice. This is a patch suggested by RDMA team. Change-ID: Icce519c266e4221b8a2a72a15ba5bf01750e5852 Signed-off-by:
-
Joe Perches authored
Use __stringify instead. Signed-off-by:
Joe Perches <joe@perches.com> Tested-by:
-
Harshitha Ramamurthy authored
The function i40e_client_release has a print statement that uses an adapter pointer which is not initialized if a previous if statement is not true. Hence, intialize it in the right place. Change-ID: I1afdaa2c46771ac42be56edcc41bb56b455b06c8 Signed-off-by:
Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by:
-
Catherine Sullivan authored
We were having a race between the completion of the client open and calls to the client ops so don't call a client op unless we are sure the client is open. Testing Hints: Load IWARP driver and make sure it works as expected. Change-Id: I741f4f2aa4fcbfdad3e40dabbbb1b005856c396b Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
-
Heinrich Schuchardt authored
i is defined as int but output as %u several times. Adjust the format identifiers. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by:
-
Carolyn Wyborny authored
This patch adds support for HMC resource and profile cmds for X722 firmware. Change-ID: Icc332101f38ab15d1bfa167823100eb4f6822f7e Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
-
Carolyn Wyborny authored
This patch fixes byte ordering problems found when enabling this feature support. Without this patch, the feature will not work correctly. This patch fixes the definitions to have the correct byte order. Change-ID: Ic7489fbcbe2195df7be62ff5e359201b827cefe6 Signed-off-by:
-
Carolyn Wyborny authored
This patch refactors tail bump check. Change-ID: Ide0e19171d67d90cb2b06b8dcd4fa791ae120160 Signed-off-by:
-
Mitch Williams authored
The PF driver tells us the link speed, so do something with that information. Add link speed to log messages, and report speed through ethtool. Change-Id: I279dc9540cc5203376406050a3e8d67e128d5882 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Jacob Keller authored
Replace calls to create_singlethread_workqueue instead with alloc_workqueue as is style with other Intel drivers. This provides more control over workqueue creation, and allows explicit setting of the desired mode of operation. It also makes it more obvious that driver name constant is passed to a format "%s". Change-ID: I6192b44caf5140336cd54c5b350d51c73b541fdb Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Jacob Keller authored
A previous refactor added support to store user configuration for VSIs, so that extra VSIs such as for VMDq can use this information when configuring. Unfortunately the i40e_vsi_config_rss function was missed in this refactor, and the values were being ignored. Fix this by checking for the fields and using those instead of always using the default values. Signed-off-by:
-
Jacob Keller authored
X722 hardware requires using the admin queue to configure RSS. This function was previously re-written in commit e69ff813 ("i40e: rework the functions to configure RSS with similar parameters"). However, the previous refactor did not work correctly for a few reasons (a) it does not check whether seed is NULL before using it, resulting in a NULL pointer dereference [ 402.954721] BUG: unable to handle kernel NULL pointer dereference at (null) [ 402.955568] IP: [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 402.956402] PGD ad610067 PUD accc0067 PMD 0 [ 402.957235] Oops: 0000 [#1] SMP [ 402.958064] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_filter ebtable_ broute bridge stp llc ebtable_nat ebtables ip6table_mangle ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv 6 ip6table_security ip6table_filter ip6_tables iptable_mangle iptable_raw iptable_nat nf_conntrack_ipv4_ nf_defrag_ipv4_ nf_nat_ip v4_ nf_nat nf_conntrack iptable_security intel_rapl i86_kg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_clMl crc32_ pclMl ghash_clMlni_intel iTCO_wdt iTCO_vendor_support shpchp sb_edac dcdbas pcspkr joydev ipmi_devintf wmi edac_core ipmi_ssif acpi_ad acpi_ower_meter ipmi_si ipmi_msghandler mei_me nfsd lpc_ich mei ioatdma tpm_tis auth_rpcgss tpm nfs_acl lockd grace s unrpc ifs nngag200 i2c_algo_bit drm_kms_helper ttm drm iigbe bnx2x i40e dca mdio ptp pps_core libcrc32c fjes crc32c_intel [ 402.965563] CPU: 22 PID: 2461 Conm: ethtool Not tainted 4.6.0-rc7_1.2-ABNidQ+ #20 [ 402.966719] Hardware name: Dell Inc. PowerEdge R720/0C4Y3R, BIOS 2.5.2 01/28/2015 [ 402.967862] task: ffff880219b51dc0 ti: ffff8800b3408000 task.ti: ffff8800b3408000 [ 402.969046] RIP: 0010:[<ffffffffa0090ccf>] [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 402.970339] RSP: 0018:ffff8800b340ba90 EFLAGS: 00010246 [ 402.971616] RAX: 0000000000000000 RBX: ffff88042ec14000 RCX: 0000000000000200 [ 402.972961] RDX: ffff880428eb9200 RSI: 0000000000000000 RDI: ffff88042ec14000 [ 402.974312] RBP: ffff8800b340baf8 R08: ffff880237ada8f0 R09: ffff880428eb9200 [ 402.975709] R10: ffff880428eb9200 R11: 0000000000000000 R12: ffff88042ec2e000 [ 402.977104] R13: ffff88042ec2e000 R14: ffff88042ec14000 R15: ffff88022ea00800 [ 402.978541] FS: 00007f84fd054700(0000) GS:ffff880237ac0000(0000) knlGS:0000000000000000 [ 402.980003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 402.981508] CR2: 0000000000000000 CR3: 000000003289e000 CR4: 00000000000406e0 [ 402.983028] Stack: [ 402.984578] 0000000002000200 0000000000000000 ffff88023ffeda68 ffff88023ffef000 [ 402.986187] 0000000000000268 ffff8800b340bbf8 ffff88023ffedd80 0000000088ce4f1d [ 402.987844] ffff88042ec14000 ffff88022ea00800 ffff88042ec2e000 ffff88042ec14000 [ 402.989509] Call Trace: [ 402.991200] [<ffffffffa009636f>] i40e_config_rss+0x11f/0x1c0 [i40e] [ 402.992924] [<ffffffffa00a1ae0>] i40e_set_rifh+0ic0/0x130 [i40e] [ 402.994684] [<ffffffff816d54b7>] ethtool_set_rifh+0x1f7/0x300 [ 402.996446] [<ffffffff8136d02b>] ? cred_has_capability+0io6b/0x100 [ 402.998203] [<ffffffff8136d102>] ? selinux_capable+0x12/0x20 [ 402.999968] [<ffffffff8136277b>] ? security_capable+0x4b/0x70 [ 403.001707] [<ffffffff816d6da3>] dev_ethtool+0x1423/0x2290 [ 403.003461] [<ffffffff816eab41>] dev_ioctl+0x191/0io630 [ 403.005186] [<ffffffff811cf80a>] ? lru_cache_add+0x3a/0i80 [ 403.006942] [<ffffffff817f2a8e>] ? _raw_spin_unlock+0ie/0x20 [ 403.008691] [<ffffffff816adb95>] sock_do_ioctl+0x45/0i50 [ 403.010421] [<ffffffff816ae229>] sock_ioctl+0x209/0x2d0 [ 403.012173] [<ffffffff81262194>] do_vfs_ioctl+0u4/0io6c0 [ 403.013911] [<ffffffff81262829>] SyS_ioctl+0x79/0x90 [ 403.015710] [<ffffffff817f2e72>] entry_SYSCALL_64_fastpath+0x1a/0u4 [ 403.017500] Code: 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 89 fb 48 83 ec 40 4c 8b a7 e0 05 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 <48> 8b 06 41 0f b7 bc 24 f2 0f 00 00 48 89 45 9c 48 8b 46 08 48 [ 403.021454] RIP [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 403.023395] RSP <ffff8800b340ba90> [ 403.025271] CR2: 0000000000000000 [ 403.027169] ---[ end trace 64561b528cf61cf0 ]--- (b) it does not even bother to use the passed in *lut parameter which defines the requested lookup table. Instead it uses its own round robin table. Fix these issues by re-writing it to be similar to i40e_config_rss_reg and i40e_get_rss_aq. Fixes: e69ff813 ("i40e: rework the functions to configure RSS with similar parameters", 2015-10-21) Signed-off-by:
-
Jacob Keller authored
Move this function below the two functions related to configuring RSS via the admin queue. This helps co-locate the two functions, and made it easier to spot a bug in the first i40e_config_rss_aq function as compared to the i40e_get_rss_aq function. Signed-off-by:
-
Vegard Nossum authored
We've already set sk to sock->sk and dereferenced it, so if it's NULL we would have crashed already. Moreover, if it was NULL we would have crashed anyway when jumping to 'out' and trying to unlock the sock. Furthermore, if we had assigned a different value to 'sk' we would have been calling lock_sock() and release_sock() on different sockets. My conclusion is that these two lines are complete nonsense and only serve to confuse the reader. Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
-
