The function adf_init_admin_pm() is not used outside of the intel_qat
module.
Do not export it.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the recently added of_property_read_reg() helper to get the
untranslated "reg" address value.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Expose 'pm_idle_enabled' sysfs attribute. This attribute controls how
idle conditions are handled. If it is set to 1 (idle support enabled)
when the device detects an idle condition, the driver will transition
the device to the 'MIN' power configuration.

In order to set the value of this attribute for a device, the device
must be in the 'down' state.

This only applies to qat_4xxx generation.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A QAT GEN4 device can be currently configured for crypto (sym;asym) or
compression (dc).

This patch extends the configuration to support more variations of these
services, download the correct FW images on the device and report the
correct capabilities on the device based on the configured service.

The device can now be configured with the following services:
"sym", "asym", "dc", "sym;asym", "asym;sym", "sym;dc", "dc;sym",
"asym;dc", "dc;asym".

With this change, the configuration "sym", "asym", "sym;dc", "dc;sym",
"asym;dc", "dc;asym" will be accessible only via userspace, i.e. the driver
for those configurations will not register into the crypto framework.
Support for such configurations in kernel will be enabled in a later
patch.

The pairs "sym;asym" and "asym;sym" result in identical device config.
As do "sym;dc", "dc;sym", and "asym;dc", "dc;asym".
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The data structure adf_fw_config is used to select which firmware image
is loaded on a certain set of accelerator engines.
When support for 402xx was added, the adf_fw_config arrays were
duplicated in order to select different firmware images.

Since the configurations are the same regardless of the QAT GEN4
flavour, in preparation for adding support for multiple configurations,
refactor the logic that retrieves the firmware names in the 4xxx driver.
The structure adf_fw_config has been changed to contain a firmware object
id that is then mapped to a firmware name depending of the device type.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Update fw image names to be constant throughout the driver.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Make use of the default statements by changing the pattern:
	switch(condition) {
	case COND_A:
	...
		break;
	case COND_b:
	...
		break;
	}
	return ret;

in

	switch(condition) {
	case COND_A:
	...
		break;
	case COND_b:
	...
		break;
	default:
		return ret;
	}
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The following checkpatch warning has been fixed:
- WARNING: Missing a blank line after declarations
Signed-off-by: Franziska Naepelt <franziska.naepelt@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The callback function for RSA frees the memory allocated for the source
and destination buffers before unmapping them.
This sequence is wrong.

Change the cleanup sequence to unmap the buffers before freeing them.

Fixes: 3dfaf007 ("crypto: qat - remove dma_free_coherent() for RSA")
Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com>
Co-developed-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Signed-off-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The callback function for DH frees the memory allocated for the
destination buffer before unmapping it.
This sequence is wrong.

Change the cleanup sequence to unmap the buffer before freeing it.

Fixes: 029aa462 ("crypto: qat - remove dma_free_coherent() for DH")
Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com>
Co-developed-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Signed-off-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MAX_CIPHER_BLOCKSIZE is an internal implementation detail and should
not be relied on by users of the Crypto API.

Instead of storing the IV on the stack, allocate it together with
the crypto request.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Update slice mask enum for 4xxx device with BIT(7) to mask SMX fuse.
This change is done to align the slice mask with the hardware fuse
register.
Signed-off-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The LZS and RAND features are no longer available on QAT.
Remove the definition of bit 6 (LZS) and bit 7 (RAND) in the enum that
represents the capabilities and replace them with a comment mentioning
that those bits are reserved.
Those bits shall not be used in future.
Signed-off-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function adf_dbgfs_exit() was improperly named causing the build to
fail when CONFIG_DEBUG_FS=n.

Rename adf_dbgfs_cleanup() as adf_dbgfs_exit().

This fixes the following build error:
      CC [M]  drivers/crypto/intel/qat/qat_c62x/adf_drv.o
    drivers/crypto/intel/qat/qat_c62x/adf_drv.c: In function ‘adf_cleanup_accel’:
    drivers/crypto/intel/qat/qat_c62x/adf_drv.c:69:9: error: implicit declaration of function ‘adf_dbgfs_exit’; did you mean ‘adf_dbgfs_init’? [-Werror=implicit-function-declaration]
       69 |         adf_dbgfs_exit(accel_dev);
          |         ^~~~~~~~~~~~~~
          |         adf_dbgfs_init
    cc1: all warnings being treated as errors
    make[2]: *** [scripts/Makefile.build:252: drivers/crypto/intel/qat/qat_c62x/adf_drv.o] Error 1
    make[1]: *** [scripts/Makefile.build:494: drivers/crypto/intel/qat/qat_c62x] Error 2
    make: *** [Makefile:2026: drivers/crypto/intel/qat] Error 2

Fixes: 9260db66 ("crypto: qat - move dbgfs init to separate file")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306030654.5t4qkyN1-lkp@intel.com/Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The core clock for the Crypto Engine block on Qualcomm SoCs SM6115 and
QCM2290 are provided via the RPM block.

So mark the compatibles for these SoCs to indicate that only 'core'
clock is required for such SoCs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently the compatible list available in 'qce' dt-bindings does not
support SM8150 and IPQ4019 SoCs directly which may lead to potential
'dtbs_check' error(s).

Fix the same.

Fixes: 00f3bc2d ("dt-bindings: qcom-qce: Add new SoC compatible strings for Qualcomm QCE IP")
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move initialization of debugfs entries to a separate file.
This simplifies the exclusion of the debugfs logic in the QAT driver
when the kernel is built with CONFIG_DEBUG_FS=n.
In addition, it will allow to consolidate the addition of debugfs
entries to a single location in the code.

This implementation adds infrastructure to create (and remove) debugfs
entries at two different stages. The first, done when a device is probed,
allows to keep debugfs entries persistent between a transition in device
state (up to down or vice versa). The second, done after the initialization
phase, allows to have debugfs entries that are accessible only when
the device is up.

In addition, move the creation of debugfs entries for configuration
to the newly created function adf_dbgfs_init() and replace symbolic
permissions with octal permissions when creating the debugfs files.
This is to resolve the following warning reported by checkpatch:

  WARNING: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

After commit b8a1a4cd ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f4 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

With the update of the permanent and intermittent health errors, the
actual indicator for the health test indicates a potential error only
for the one offending time stamp gathered in the current iteration
round. The next iteration round will "overwrite" the health test result.

Thus, the entropy collection loop in jent_gen_entropy checks for
the health test failure upon each loop iteration. However, the
initialization operation checked for the APT health test once for
an APT window which implies it would not catch most errors.

Thus, the check for all health errors is now invoked unconditionally
during each loop iteration for the startup test.

With the change, the error JENT_ERCT becomes unused as all health
errors are only reported with the JENT_HEALTH return code. This
allows the removal of the error indicator.

Fixes: 3fde2fe9 ("crypto: jitter - permanent and intermittent health errors"
)
Reported-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The way random data is read from hardware has changed from
Octeon CN10KA-B0 and later SoCs onwards. A new set of registers
have been added to read random data and to verify whether the
read data is valid or not. This patch extends and uses
RNM_PF_TRNG_DAT and RNM_PF_TRNG_STS CSRs to read random number
and status for the applicable silicon variants.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit df8fc4e9 ("kbuild: Enable -fstrict-flex-arrays=3") uncovered
a type mismatch in cesa 3des support that leads to a memcpy beyond the
end of a structure:

In function 'fortify_memcpy_chk',
    inlined from 'mv_cesa_des3_ede_setkey' at drivers/crypto/marvell/cesa/cipher.c:307:2:
include/linux/fortify-string.h:583:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  583 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is probably harmless as the actual data that is copied has the correct
type, but clearly worth fixing nonetheless.

Fixes: 4ada4839 ("crypto: marvell/cesa - add Triple-DES support")
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a new CCP/PSP PCI device ID and new PSP register offsets.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

PCI device 0x17E0 includes new TEE offsets, doesn't support a
platform mailbox, and does support platform doorbell
so introduce a new structure to represent it.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some platforms might support platform access doorbell but not mailbox.
Add an extra guard to ensure this doesn't cause accesses to wrong ranges
if a consumer calls psp_send_platform_access_msg().
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Make the help text for CRYPTO_STATS explicitly mention that it reduces
the performance of the crypto API.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix build warnings when DEBUG_FS is not enabled by using an empty
do-while loop instead of a value:

In file included from ../drivers/crypto/nx/nx.c:27:
../drivers/crypto/nx/nx.c: In function 'nx_register_algs':
../drivers/crypto/nx/nx.h:173:33: warning: statement with no effect [-Wunused-value]
  173 | #define NX_DEBUGFS_INIT(drv)    (0)
../drivers/crypto/nx/nx.c:573:9: note: in expansion of macro 'NX_DEBUGFS_INIT'
  573 |         NX_DEBUGFS_INIT(&nx_driver);
../drivers/crypto/nx/nx.c: In function 'nx_remove':
../drivers/crypto/nx/nx.h:174:33: warning: statement with no effect [-Wunused-value]
  174 | #define NX_DEBUGFS_FINI(drv)    (0)
../drivers/crypto/nx/nx.c:793:17: note: in expansion of macro 'NX_DEBUGFS_FINI'
  793 |                 NX_DEBUGFS_FINI(&nx_driver);

Also, there is no need to build nx_debugfs.o when DEBUG_FS is not
enabled, so change the Makefile to accommodate that.

Fixes: ae0222b7 ("powerpc/crypto: nx driver code supporting nx encryption")
Fixes: aef7b31c ("powerpc/crypto: Build files for the nx device driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Breno Leitão <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We have no device-specific data for fsl,imx25-rngb. There's no need to
set .data = NULL, this is the default.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Mark the imx_rngc_probe function as __init.

There's no need to support hotplugging in the imx-rngc driver. We use
module_platform_driver_probe, the probe function will only be called at
startup.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rewrite the defines for register bits to use BIT(x) instead of writing
out the 32-bit number. This makes it easier to compare the code with the
register descriptions in the reference manual.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the mechanism from bitfield.h to read the rng type field in the
version_id register. This makes the code a tiny bit simpler.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The "level" field in the status register contains the number of random
bytes that are available in the FIFO.  Use GENMASK to extract this field.
We only want to check if level is 0 or if we can read another byte.
There's no need for the shift or the level variable.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some shash algorithms are so simple that they don't have an init_tfm
function.  These can be cloned trivially.  Check this before failing
in crypto_clone_shash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Allow cmac to be cloned.  The underlying cipher needs to support
cloning by not having a cra_init function (all implementations of
aes that do not require a fallback can be cloned).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Allow simple ciphers to be cloned, if they don't have a cra_init
function.  This basically rules out those ciphers that require a
fallback.

In future simple ciphers will be eliminated, and replaced with a
linear skcipher interface.  When that happens this restriction will
disappear.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the modern init_tfm/exit_tfm interface instead of the obsolete
cra_init/cra_exit interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

gcc warns if prototypes are only visible to the caller but
not the callee:

crypto/aegis128-neon-inner.c:134:6: warning: no previous prototype for 'crypto_aegis128_init_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:164:6: warning: no previous prototype for 'crypto_aegis128_update_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:221:6: warning: no previous prototype for 'crypto_aegis128_encrypt_chunk_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:270:6: warning: no previous prototype for 'crypto_aegis128_decrypt_chunk_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:316:5: warning: no previous prototype for 'crypto_aegis128_final_neon' [-Wmissing-prototypes]

The prototypes cannot be in the regular aegis.h, as the inner neon code
cannot include normal kernel headers. Instead add a new header just for
the functions provided by this file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A platform option like AMBA should never be selected by a driver.
Use a dependency instead.

Also remove the depenency on DMADEVICES because the driver builds
just fine without it.  Instead add a dependency on HAS_DMA for dma
mapping support.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Kconfig updated to depend on DMADEVICES instead of selecting it.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305191929.Eq4OVZ6D-lkp@intel.com/Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Include module.h in arch/arm64/crypto/sha256-glue.c as it uses
various macros (such as MODULE_AUTHOR) that are defined there.

Also fix the ordering of types.h.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305191953.PIB1w80W-lkp@intel.com/Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adding hash/HMAC support for SHA-2 and SM3 to StarFive cryptographic
module.
Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>