This patch removes exynos_drm_crtc_complete_scanout function call
which makes sure for overlay data to be updated to real hardware
when drm driver is released.

With atomic modeset support, it doesn't need the funtion anymore
because atomic modeset interface makes sure that.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch also moves mixer_vsync_set_update() to newly introduced
mixer_atomic_begin/flush callbacks. This ensures that all mixer planes
will be updated on the same vsync event.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Some CRTC drivers (like Exynos DRM Mixer) can handle blocking register
updates only on per-device level, not per-plane level. This patch changes
exynos_crts atomic_begin/atomic_flush callbacks to handle the entire crtc,
instead of given planes, so driver can handle both cases on their own.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Always use macro instead of hard-coded '2' value in conditions related
to video processor window. Additional checks are not needed, because
video layer is registered only when video processor is available.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Allow the remaining alpha formats now that blending
is properly setup.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Properly configure blending properties of given hardware layer based on
the selected pixel format. Currently only per-pixel-based alpha is possible
when respective pixel format has been selected. Configuration of global,
per-plane alpha value, color key and background color will be added later.

This patch is heavily inspired by earlier work done by Tobias Jakobi
<tjakobi@math.uni-bielefeld.de>.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Previously blending setup was static and most of it was
done in mixer_win_reset().
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

'zpos' plane property is configurable, so adjust hardware layers
priority based on the zpos value. 'zpos' value shifted by one can be
used directly as hw priority value and stored to the registers, because
mixer accepts priority values from 1 to 15 (0 means that layer is
disabled).

This patch also changes the default layer priority to match already
exposed initial zpos values. The initial configuration is now:
[top] video > gfx layer1 > gfx layer0 [bottom].
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch adds all infrastructure to make zpos plane property
configurable from userspace.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch renames zpos entry to index, because in most places it is
used as index for selecting hardware layer/window instead of
configurable layer position. This will later enable to make the zpos
property configurable.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Fixes: 1e4854e9 ("drm/amdgpu/powerplay: implement thermal control for tonga.")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- gk20a instmem fixes / improvements
- more gm10x vs gm20x differences deal with
- better support for high-frequency hdmi modes
- pstate control interfaces moved to debugfs
- support for pcie link speed changes
- misc other fixes across the board

* 'linux-4.5' of git://github.com/skeggsb/linux: (50 commits)
  drm/nouveau/pmu: prevent falcon from acking interrupts routed to the host
  drm/nouveau/perf: change pcie speed on pstate change
  drm/nouveau/perf: add fields for pci speed and width and use it for the pstates
  drm/nouveau/bios/perf: parse the pci speed from the bios for tesla and newer cards
  drm/nouveau/pci: implement pcie speed change for kepler+
  drm/nouveau/pci: implement pcie speed change for Fermi
  drm/nouveau/pci: implement pcie speed change for tesla
  drm/nouveau/pci: implement generic code for pcie speed change
  drm/nouveau/pci: add gk104 variant
  drm/nouveau/pci: add gf106 variant
  drm/nouveau/kms: take mode_config mutex in connector hotplug path
  drm/nouveau/nouveau/perfmon: add interface files for current core voltage
  drm/nouveau/sysfs: remove pstate interface
  drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs
  drm/nouveau/debugfs: we need a ctrl object for debugfs
  drm/nouveau/debugfs: rename functions to indicate they are used inside drm
  drm/nouveau/debugfs: add infrastructure to add files with other fops than only read
  drm/nouveau/fifo/gf100: remove references to "daemon"
  drm/nouveau/fb/nv50: remove references to "daemon"
  drm/nouveau/clk: remove references to "daemon"
  ...

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

v2: remove error and only set link for pcie devices
v6: remove check for pcie device
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>

Signed-off-by: Karol Herbst <nouveau@karolherbst.de>

Signed-off-by: Karol Herbst <nouveau@karolherbst.de>

v2: rename functions
v3: remove pcie2 accessors
v6: fix alignement and line width, also remove useless code
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>

v5: don't set kepler func pointers
v6: fix alignment and line length

v5: don't set fermi or kepler func pointers
v6: fix alignment

v2: rename and group functions
v4: change copyright information
    move printing of pcie speeds into oneinit,
    rename all pcie functions to nvkm_pcie_*
    don't try to raise the pcie version when no higher one is supported
v5: revert Copyright changes and rename nvkm_pcie_raise_version to nvkm_pcie_set_version
v6: remove some useless pci_is_pcie checks and rework messages
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>

v2: change email used in header
v4: change Copyright information
v5: revert Copyright changes
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>

v2: change email used in header
v4: change Copyright information
v5: revert Copyright changes
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>

fdo#93634
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We will need our own debugfs_init and cleanup functions, because
nouveau_drm isn't ready while the DRM ones are called by DRM.
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

v2: use the same object for private data as with the drm debugfs functions
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

From DCB 4.1 spec.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Differences from GM10x:
- GM20x LTC count detection differs from GM10x
- GM20x init doesn't require large page size setting
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

resman and nvgpu both do this, presumably for good reason.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

GM20x doesn't require the priv ring timeout bumps that GK/GM10x have.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>