- 10 Oct, 2007 40 commits
-
-
Karsten Keil authored
Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
A net_device struct provides field dev_id. It is used for unique ipv6 generation in case of shared network cards (as for the OSA network cards of IBM System z). If VLAN devices are built on top of such shared network cards, this dev_id information needs to be transferred to the VLAN device. Signed-off-by:
Ursula Braun <braunu@de.ibm.com> Signed-off-by:
-
Herbert Xu authored
The lastused update check in xfrm_output can be done just as well in the mode output function which is specific to RO. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
Now that the only callers of xfrm_replay_notify are in xfrm, we can remove the export. This patch also removes xfrm_aevent_doreplay since it's now called in just one spot. Signed-off-by:
-
Herbert Xu authored
The replay counter is one of only two remaining things in the output code that requires a lock on the xfrm state (the other being the crypto). This patch moves it into the generic xfrm_output so we can remove the lock from the transforms themselves. Signed-off-by:
-
Herbert Xu authored
The functions xfrm_state_check and xfrm_state_check_space are only used by the output code in xfrm_output.c so we can move them over. Signed-off-by:
-
Herbert Xu authored
Most of the code in xfrm4_output_one and xfrm6_output_one are identical so this patch moves them into a common xfrm_output function which will live in net/xfrm. In fact this would seem to fix a bug as on IPv4 we never reset the network header after a transform which may upset netfilter later on. Signed-off-by:
-
Herbert Xu authored
The keys are only used during initialisation so we don't need to carry them in esp_data. Since we don't have to allocate them again, there is no need to place a limit on the authentication key length anymore. Signed-off-by:
-
Herbert Xu authored
The keys are only used during initialisation so we don't need to carry them in esp_data. Since we don't have to allocate them again, there is no need to place a limit on the authentication key length anymore. This patch also kills the unused auth.icv member. Signed-off-by:
-
Ursula Braun authored
AF_IUCV socket programs may waste Linux storage, because af_iucv allocates an skb whenever posted by the receive callback routine and receives the message immediately. Message receival is now postponed if data from previous callbacks has not yet been transferred to the receiving socket program. Instead a message handle is saved in a message queue as a reminder. Once messages could be given to the receiving socket program, there is an additional checking for entries in the message queue, followed by skb allocation and message receival if applicable. Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Andy Gospodarek authored
I recently noticed that when calling: # ethtool -s eth0 autoneg on on a 5722 (though I'm sure it's not specific to that card) that subsequent checks of the cards status looked like this: # ethtool eth0 Settings for eth0: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: No <---- This seems odd?!? Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: d Current message level: 0x000000ff (255) Link detected: yes I noticed that the following commit: commit 3600d918 Author: Michael Chan <mchan@broadcom.com> Date: Thu Dec 7 00:21:48 2006 -0800 [TG3]: Allow partial speed advertisement. Honor the advertisement bitmask from ethtool. We used to always advertise the full capability when autoneg was set to on. changed things around so that ethtool speed settings were strictly followed. Unfortunately ethtool doesn't seem to set ADVERTISED_Autoneg in the advertising field (and maybe it shouldn't have to). I'd vote that it should be fixed there, but it should also be added here just in case someone using ethtool ioctls in their own application gets what they want. Adding that flag in tg3_set_settings seemed like the most logical place since the driver works fine on boot. This is just an issue when re-enabling autonegotiation, so we should probably nip it there. Signed-off-by:Andy Gospodarek <andy@greyhouse.net> Acked-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Alex Villacís Lasso authored
This fixes a kernel oops triggered by the ksdazzle SIR driver. We need more space for input frames, and 2048 should be plenty of it. Signed-off-by:
Alex Villacís Lasso <a_villacis@palosanto.com> Signed-off-by:
Samuel Ortiz <samuel@sortiz.org> Signed-off-by:
-
Jeff Garzik authored
This always bugged me: dev_ioctl() called dev_ifsioc() either inside read_lock(dev_base_lock) or rtnl_lock(), depending on the ioctl being executed. This change moves the ioctls executed inside dev_base_lock to a new function, dev_ifsioc_locked(). Now the locking context is completely clear to the reader. Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Stephen Hemminger authored
Fix a bunch of sparse warnings. Mostly about 0 used as NULL pointer, and shadowed variable declarations. One notable case was that hash size should have been unsigned. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Ilpo Järvinen authored
This should no longer be necessary because fackets_out is accurate. It indicates bugs elsewhere, thus report it. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
1) Passing wrong skb to tcp_adjust_fackets_out could corrupt fastpath_cnt_hint as tcp_skb_pcount(next_skb) is not included to it if hint points exactly to the next_skb (it's lagging behind, see sacktag). 2) When fastpath_skb_hint is put backwards to avoid dangling skb reference, the skb's pcount must also be removed from count (not included like above). Reported by Cedric Le Goater <legoater@free.fr> Signed-off-by:
-
Michael Chan authored
Signed-off-by:
-
Matt Carlson authored
This patch adds the support for 5784 and 5764 devices. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
-
Matt Carlson authored
Newer products change the way the ASIC revision is obtained. This patch implements how the driver will extract the revision number. This patch also adds preliminary CPMU support. CPMU stands for Central Power Management Unit. The CPMU's role is to put the chip into lower power states when the operating conditions allow it. Signed-off-by:
-
Matt Carlson authored
Newer tg3 devices shuffle around the registers in PCI configuration space. This patch changes the way the driver accesses the PCI capabilities registers. Hardcoded register locations are replaced with offsets from pci_find_capability() return values. Signed-off-by:
-
Auke Kok authored
A merge/cleanup code accidentally dropped 8254x code in and removed 8257x code here. Undo this mistake and use the pci-e relevant register test similar as to what is in e1000. Signed-off-by:
Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Auke Kok authored
A small bug crawled in the -DDEBUG enabled code. Fix this to properly call the backreference device name. Signed-off-by:
-
Ursula Braun authored
Debugging statements are added for inbound packets with unknown header id. Those packets are discarded and no longer processed as osn-packets. Signed-off-by:
-
Klaus D. Wacker authored
When the lcs irq routine detects channel failures it drives device recovery. After this event the device is no longer usable for shutdown requests, because the lcs_irq routine may get wrong channel status information. In such a case the lcs_irq routine marks the channel in 'error' state. The channel state comes back to 'running' after restarting the channels. Signed-off-by:
Klaus D. Wacker <kdwacker@de.ibm.com> Signed-off-by:
-
Ursula Braun authored
if qeth_set_multicast_list() is performed on 2 CPUs in parallel, card->ip_list may end corrupted. Solution: In function __qeth_delete_all_mc() remove card->ip_list entry before invoking qeth_deregister_addr_entry(). Thus a 2nd invocation of qeth_set_multicast_list() cannot try to remove the same entry twice. Signed-off-by Ursula Braun <braunu@de.ibm.com> Signed-off-by: -
Frank Blaschka authored
Fix filling the qdio buffers in EDDP mode. Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Klaus D. Wacker authored
HiperSockets infrastructure (layer-3 mode) supports only IPv4 or IPv6 packets. Sending other packet types disturbs TCP/IP on z/VM, which issues messages about invalid packets. Qeth send routine will detect packet type on sending over a HiperSockets interface (in layer-3 mode) and drop non IP packets. The error and drop count of the interface is incremented. Signed-off-by:
-
David S. Miller authored
With cleanup suggestions and bugs spotted by Stephen Hemminger, Ingo Oeser, Matheos Worku, and Oliver Hartkopp. Signed-off-by: -
Gerrit Renker authored
This fixes two bugs in processing of connection-Requests in v{4,6}_conn_request: 1. Due to using the variable `reset_code', the Reset code generated internally by dccp_parse_options() is overwritten with the initialised value ("Too Busy") of reset_code, which is not what is intended. 2. When receiving a connection-Request on a multicast or broadcast address, no Reset should be generated, to avoid storms of such packets. Instead of jumping to the `drop' label, the v{4,6}_conn_request functions now return 0. Below is why in my understanding this is correct: When the conn_request function returns < 0, then the caller, dccp_rcv_state_process(), returns 1. In all instances where dccp_rcv_state_process is called (dccp_v4_do_rcv, dccp_v6_do_rcv, and dccp_child_process), a return value of != 0 from dccp_rcv_state_process() means that a Reset is generated. If on the other hand the conn_request function returns 0, the packet is discarded and no Reset is generated. Note: There may be a related problem when sending the Response, due to the following. if (dccp_v6_send_response(sk, req, NULL)) goto drop_and_free; /* ... */ drop_and_free: return -1; In this case, if send_response fails due to transmission errors, the next thing that is generated is a Reset with a code "Too Busy". I haven't been able to conjure up such a condition, but it might be good to change the behaviour here also (not done by this patch). Signed-off-by:Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Gerrit Renker authored
This corrects erroneous documentation of the socket API. Signed-off-by:
-
Gerrit Renker authored
The elapsed time uses u32, but printk was using %d, not %u. Signed-off-by:
-
Gerrit Renker authored
This * removes a declaration of a non-existent function __dccp_minisock_init; * shifts the initialisation function dccp_minisock_init() from options.c to minisocks.c, where it is more naturally expected to be. Signed-off-by:
-
Gerrit Renker authored
This replaces several uses of standard arithmetic with the DCCP sequence number arithmetic functions. The problem here is that the sequence number wrap-around was not taken into consideration. * Condition "seqp->ccid2s_seq <= prev->ccid2s_seq" has been replaced by dccp_delta_seqno(seqp->ccid2s_seq, prev->ccid2s_seq) >= 0 since if seqp is `before' prev, then the delta_seqno() is positive. * The test whether sequence numbers `a' and `b' are consecutive has the form dccp_delta_seqno(a, b) == 1 * Increment of ccid2hctx_rpseq could be done using dccp_inc_seqno(), but since here the incremented ccid2hctx_rpseq == seqno, used assignment instead. Signed-off-by:
-
Gerrit Renker authored
skb's passed to ccid2_hc_tx_send_packet() are headerless, the packet type is decided later, in dccp_write_xmit(). Therefore the first test of the switch/case block is always true, the others are never reached. Signed-off-by:
-
Gerrit Renker authored
This removes a test for `val < 1' which would only have been triggered when val < 0, due to a preceding test for 0. Fixed by using an unsigned type for cwnd (as in TCP) instead. Signed-off-by:
-
Gerrit Renker authored
This removes an ugly BUG_ON which has been pointed out by Arnaldo. Instead of freezing up the machine, a `critical' message is now issued to the system log. There is potential of doing this more gracefully (eg. there are a few internal variables which could be updated despite the lack of memory), but that requires more complicated changes to the algorithm; thus a `FIXME' has been added. Signed-off-by:
-
Gerrit Renker authored
This patch simplifies the interface of ccid2_hc_tx_alloc_seq(): * ccid2_hc_tx_alloc_seq() is always called with an argument of CCID2_SEQBUF_LEN; * other code - ccid2_hc_tx_check_sanity() - even depends on the assumption that ccid2_hc_tx_alloc_seq() has been called with this particular size; * passing the `gfp_t' argument to ccid2_hc_tx_alloc_seq() is redundant with gfp_any(). Signed-off-by: -
Gerrit Renker authored
This adds documentation on the use of service codes on client and server. Signed-off-by:
-
