- 18 Oct, 2018 22 commits
-
-
Xin Long authored
[ Upstream commit d7ab5cdc ] When processing pmtu update from an icmp packet, it calls .update_pmtu with sk instead of skb in sctp_transport_update_pmtu. However for sctp, the daddr in the transport might be different from inet_sock->inet_daddr or sk->sk_v6_daddr, which is used to update or create the route cache. The incorrect daddr will cause a different route cache created for the path. So before calling .update_pmtu, inet_sock->inet_daddr/sk->sk_v6_daddr should be updated with the daddr in the transport, and update it back after it's done. The issue has existed since route exceptions introduction. Fixes: 4895c771 ("ipv4: Add FIB nexthop exceptions.") Reported-by: ian.periam@dialogic.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 0e1d6eca ] We have an impressive number of syzkaller bugs that are linked to the fact that syzbot was able to create a networking device with millions of TX (or RX) queues. Let's limit the number of RX/TX queues to 4096, this really should cover all known cases. A separate patch will add various cond_resched() in the loops handling sysfs entries at device creation and dismantle. Tested: lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap RTNETLINK answers: Invalid argument lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap real 0m0.180s user 0m0.000s sys 0m0.107s Fixes: 76ff5cc9 ("rtnl: allow to specify number of rx and tx queues on device creation") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
[ Upstream commit bd961c9b ] Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg', which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh'). The problem is, the function bails out early if nlmsg_parse() fails, which does occur for iproute2 usage of 'struct ndmsg' because the payload length is shorter than the family header alone (as 'struct ifinfomsg' is assumed). This breaks backward compatibility with userspace -- nothing is sent back. Some examples with iproute2 and netlink library for go [1]: 1) $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent This one works, as it uses 'struct ifinfomsg'. fdb_show() @ iproute2/bridge/fdb.c """ .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)), ... if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...] """ 2) $ ip --family bridge neigh RTNETLINK answers: Invalid argument Dump terminated This one fails, as it uses 'struct ndmsg'. do_show_or_flush() @ iproute2/ip/ipneigh.c """ .n.nlmsg_type = RTM_GETNEIGH, .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)), """ 3) $ ./neighlist < no output > This one fails, as it uses 'struct ndmsg'-based. neighList() @ netlink/neigh_linux.go """ req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...] msg := Ndmsg{ """ The actual breakage was introduced by commit 0ff50e83 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails if the payload length (with the _actual_ family header) is less than the family header length alone (which is assumed, in parameter 'hdrlen'). This is true in the examples above with struct ndmsg, with size and payload length shorter than struct ifinfomsg. However, that commit just intends to fix something under the assumption the family header is indeed an 'struct ifinfomsg' - by preventing access to the payload as such (via 'ifm' pointer) if the payload length is not sufficient to actually contain it. The assumption was introduced by commit 5e6d2435 ("bridge: netlink dump interface at par with brctl"), to support iproute2's 'bridge fdb' command (not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken. So, in order to unbreak the 'struct ndmsg' family headers and still allow 'struct ifinfomsg' to continue to work, check for the known message sizes used with 'struct ndmsg' in iproute2 (with zero or one attribute which is not used in this function anyway) then do not parse the data as ifinfomsg. Same examples with this patch applied (or revert/before the original fix): $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent $ ip --family bridge neigh dev ens3 lladdr 33:33:00:00:00:01 PERMANENT dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT $ ./neighlist netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} Tested on mainline (v4.19-rc6) and net-next (3bd09b05). References: [1] netlink library for go (test-case) https://github.com/vishvananda/netlink $ cat ~/go/src/neighlist/main.go package main import ("fmt"; "syscall"; "github.com/vishvananda/netlink") func main() { neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE) for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) } } $ export GOPATH=~/go $ go get github.com/vishvananda/netlink $ go build neighlist $ ~/go/src/neighlist/neighlist Thanks to David Ahern for suggestions to improve this patch. Fixes: 0ff50e83 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error") Fixes: 5e6d2435 ("bridge: netlink dump interface at par with brctl") Reported-by:
Aidan Obley <aobley@pivotal.io> Signed-off-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Giacinto Cifelli authored
[ Upstream commit 4f761770 ] Added support for Gemalto's Cinterion ALASxx WWAN interfaces by adding QMI_FIXED_INTF with Cinterion's VID and PID. Signed-off-by:
Giacinto Cifelli <gciofono@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Shahed Shaikh authored
[ Upstream commit c333fa0c ] In regular NIC transmission flow, driver always configures MAC using Tx queue zero descriptor as a part of MAC learning flow. But with multi Tx queue supported NIC, regular transmission can occur on any non-zero Tx queue and from that context it uses Tx queue zero descriptor to configure MAC, at the same time TX queue zero could be used by another CPU for regular transmission which could lead to Tx queue zero descriptor corruption and cause FW abort. This patch fixes this in such a way that driver always configures learned MAC address from the same Tx queue which is used for regular transmission. Fixes: 7e2cf4fe ("qlcnic: change driver hardware interface mechanism") Signed-off-by:
Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by:
-
Yu Zhao authored
[ Upstream commit f7b2a56e ] Cancel pending work before freeing smsc75xx private data structure during binding. This fixes the following crash in the driver: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: mutex_lock+0x2b/0x3f <snipped> Workqueue: events smsc75xx_deferred_multicast_write [smsc75xx] task: ffff8caa83e85700 task.stack: ffff948b80518000 RIP: 0010:mutex_lock+0x2b/0x3f <snipped> Call Trace: smsc75xx_deferred_multicast_write+0x40/0x1af [smsc75xx] process_one_work+0x18d/0x2fc worker_thread+0x1a2/0x269 ? pr_cont_work+0x58/0x58 kthread+0xfa/0x10a ? pr_cont_work+0x58/0x58 ? rcu_read_unlock_sched_notrace+0x48/0x48 ret_from_fork+0x22/0x40 Signed-off-by:
Yu Zhao <yuzhao@google.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 45ec3185 ] The AON_PM_L2 is normally used to trigger and identify the source of a wake-up event. Since the RX_SYS clock is no longer turned off, we also have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and that interrupt remains active up until the magic packet detector is disabled which happens much later during the driver resumption. The race happens if we have a CPU that is entering the SYSTEMPORT INTRL2_0 handler during resume, and another CPU has managed to clear the wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we have the first CPU stuck in the interrupt handler with an interrupt cause that has been cleared under its feet, and so we keep returning IRQ_NONE and we never make any progress. This was not a problem before because we would always turn off the RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned off as well, thus not latching the interrupt. The fix is to make sure we do not enable either the MPD or BRCM_TAG_MATCH interrupts since those are redundant with what the AON_PM_L2 interrupt controller already processes and they would cause such a race to occur. Fixes: bb9051a2 ("net: systemport: Add support for WAKE_FILTER") Fixes: 83e82f4c ("net: systemport: add Wake-on-LAN support") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 8b4c3cdd ] A number of TC attributes are processed without proper validation (e.g., length checks). Add a tca policy for all input attributes and use when invoking nlmsg_parse. The 2 Fixes tags below cover the latest additions. The other attributes are a string (KIND), nested attribute (OPTIONS which does seem to have validation in most cases), for dumps only or a flag. Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Fixes: d47a6b0e ("net: sched: introduce ingress/egress block index attributes for qdisc") Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit 774268f3 ] When no Tx IRQ is available, the txq_done() routine (called from tx_done()) shouldn't be called from the polling function, as in such case it is already called in the Tx path thanks to an hrtimer. This mostly occurred when using PPv2.1, as the engine then do not have Tx IRQs. Fixes: edc660fa ("net: mvpp2: replace TX coalescing interrupts with hrtimer") Reported-by:
Stefan Chulski <stefanc@marvell.com> Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit 35f3625c ] When offloading the L3 and L4 csum computation on TX, we need to extract the l3_proto from the ethtype, independently of the presence of a vlan tag. The actual driver uses skb->protocol as-is, resulting in packets with the wrong L4 checksum being sent when there's a vlan tag in the packet header and checksum offloading is enabled. This commit makes use of vlan_protocol_get() to get the correct ethtype regardless the presence of a vlan tag. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Sean Tranchetti authored
[ Upstream commit f88b4c01 ] netlbl_unlabel_addrinfo_get() assumes that if it finds the NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is not necessarily the case as the current checks in netlbl_unlabel_staticadd() and friends are not sufficent to enforce this. If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR, NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes, these functions will all call netlbl_unlabel_addrinfo_get() which will then attempt dereference NULL when fetching the non-existent NLBL_UNLABEL_A_IPV4MASK attribute: Unable to handle kernel NULL pointer dereference at virtual address 0 Process unlab (pid: 31762, stack limit = 0xffffff80502d8000) Call trace: netlbl_unlabel_addrinfo_get+0x44/0xd8 netlbl_unlabel_staticremovedef+0x98/0xe0 genl_rcv_msg+0x354/0x388 netlink_rcv_skb+0xac/0x118 genl_rcv+0x34/0x48 netlink_unicast+0x158/0x1f0 netlink_sendmsg+0x32c/0x338 sock_sendmsg+0x44/0x60 ___sys_sendmsg+0x1d0/0x2a8 __sys_sendmsg+0x64/0xb4 SyS_sendmsg+0x34/0x4c el0_svc_naked+0x34/0x38 Code: 51001149 7100113f 540000a0 f9401508 (79400108) ---[ end trace f6438a488e737143 ]--- Kernel panic - not syncing: Fatal exception Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
Jeff Barnhill authored
[ Upstream commit 86f9bd1f ] The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly handle starting/stopping the iteration. The problem is that at some point during the iteration, an overflow is detected and the process is subsequently stopped. The item being shown via seq_printf() when the overflow occurs is not actually shown, though. When start() is subsequently called to resume iterating, it returns the next item, and thus the item that was being processed when the overflow occurred never gets printed. Alter the meaning of the private data member "offset". Currently, when it is not 0 (which only happens at the very beginning), "offset" represents the next hlist item to be printed. After this change, "offset" always represents the current item. This is also consistent with the private data member "bucket", which represents the current bucket, and also the use of "pos" as defined in seq_file.txt: The pos passed to start() will always be either zero, or the most recent pos used in the previous session. Signed-off-by:
Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit af7d6cce ] Since commit 5aad1de5 ("ipv4: use separate genid for next hop exceptions"), exceptions get deprecated separately from cached routes. In particular, administrative changes don't clear PMTU anymore. As Stefano described in commit e9fa1495 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes"), the PMTU discovered before the local MTU change can become stale: - if the local MTU is now lower than the PMTU, that PMTU is now incorrect - if the local MTU was the lowest value in the path, and is increased, we might discover a higher PMTU Similarly to what commit e9fa1495 did for IPv6, update PMTU in those cases. If the exception was locked, the discovered PMTU was smaller than the minimal accepted PMTU. In that case, if the new local MTU is smaller than the current PMTU, let PMTU discovery figure out if locking of the exception is still needed. To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU notifier. By the time the notifier is called, dev->mtu has been changed. This patch adds the old MTU as additional information in the notifier structure, and a new call_netdevice_notifiers_u32() function. Fixes: 5aad1de5 ("ipv4: use separate genid for next hop exceptions") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
-
Yunsheng Lin authored
[ Upstream commit 2e9361ef ] If SMMU is on, there is more likely that skb_shinfo(skb)->frags[i] can not send by a single BD. when this happen, the hns_nic_net_xmit_hw function map the whole data in a frags using skb_frag_dma_map, but unmap each BD' data individually when tx is done, which causes problem when SMMU is on. This patch fixes this problem by ummapping the whole data in a frags when tx is done. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 54baca09 ] There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa9498 ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by:
-
Wei Wang authored
[ Upstream commit a688caa3 ] In rawv6_send_hdrinc(), in order to avoid an extra dst_hold(), we directly assign the dst to skb and set passed in dst to NULL to avoid double free. However, in error case, we free skb and then do stats update with the dst pointer passed in. This causes use-after-free on the dst. Fix it by taking rcu read lock right before dst could get released to make sure dst does not get freed until the stats update is done. Note: we don't have this issue in ipv4 cause dst is not used for stats update in v4. Syzkaller reported following crash: BUG: KASAN: use-after-free in rawv6_send_hdrinc net/ipv6/raw.c:692 [inline] BUG: KASAN: use-after-free in rawv6_sendmsg+0x4421/0x4630 net/ipv6/raw.c:921 Read of size 8 at addr ffff8801d95ba730 by task syz-executor0/32088 CPU: 1 PID: 32088 Comm: syz-executor0 Not tainted 4.19.0-rc2+ #93 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 rawv6_send_hdrinc net/ipv6/raw.c:692 [inline] rawv6_sendmsg+0x4421/0x4630 net/ipv6/raw.c:921 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:631 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2114 __sys_sendmsg+0x11d/0x280 net/socket.c:2152 __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg net/socket.c:2159 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2159 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457099 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f83756edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f83756ee6d4 RCX: 0000000000457099 RDX: 0000000000000000 RSI: 0000000020003840 RDI: 0000000000000004 RBP: 00000000009300a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d4b30 R14: 00000000004c90b1 R15: 0000000000000000 Allocated by task 32088: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x730 mm/slab.c:3554 dst_alloc+0xbb/0x1d0 net/core/dst.c:105 ip6_dst_alloc+0x35/0xa0 net/ipv6/route.c:353 ip6_rt_cache_alloc+0x247/0x7b0 net/ipv6/route.c:1186 ip6_pol_route+0x8f8/0xd90 net/ipv6/route.c:1895 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2093 fib6_rule_lookup+0x277/0x860 net/ipv6/fib6_rules.c:122 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2121 ip6_route_output include/net/ip6_route.h:88 [inline] ip6_dst_lookup_tail+0xe27/0x1d60 net/ipv6/ip6_output.c:951 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079 rawv6_sendmsg+0x12d9/0x4630 net/ipv6/raw.c:905 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:631 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2114 __sys_sendmsg+0x11d/0x280 net/socket.c:2152 __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg net/socket.c:2159 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2159 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 5356: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x83/0x290 mm/slab.c:3756 dst_destroy+0x267/0x3c0 net/core/dst.c:141 dst_destroy_rcu+0x16/0x19 net/core/dst.c:154 __rcu_reclaim kernel/rcu/rcu.h:236 [inline] rcu_do_batch kernel/rcu/tree.c:2576 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2880 [inline] __rcu_process_callbacks kernel/rcu/tree.c:2847 [inline] rcu_process_callbacks+0xf23/0x2670 kernel/rcu/tree.c:2864 __do_softirq+0x30b/0xad8 kernel/softirq.c:292 Fixes: 1789a640 ("raw: avoid two atomics in xmit") Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 64199fc0 ] Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy, do not do it. Fixes: 2efd4fca ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit ccfec9e5] Cong noted that we need the same checks introduced by commit 76c0ddd8 ("ip6_tunnel: be careful when accessing the inner header") even for ipv4 tunnels. Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 76c0ddd8 ] the ip6 tunnel xmit ndo assumes that the processed skb always contains an ip[v6] header, but syzbot has found a way to send frames that fall short of this assumption, leading to the following splat: BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 __netdev_start_xmit include/linux/netdevice.h:4066 [inline] netdev_start_xmit include/linux/netdevice.h:4075 [inline] xmit_one net/core/dev.c:3026 [inline] dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042 __dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x441819 RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819 RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510 R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 This change addresses the issue adding the needed check before accessing the inner header. The ipv4 side of the issue is apparently there since the ipv4 over ipv6 initial support, and the ipv6 side predates git history. Fixes: c4d3efaf ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+3fde91d4d394747d6db4@syzkaller.appspotmail.com Tested-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Mahesh Bandewar authored
[ Upstream commit d4859d74 ] Syzkaller reported this on a slightly older kernel but it's still applicable to the current kernel - ====================================================== WARNING: possible circular locking dependency detected 4.18.0-next-20180823+ #46 Not tainted ------------------------------------------------------ syz-executor4/26841 is trying to acquire lock: 00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652 but task is already holding lock: 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline] bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320 process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}: process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #0 ((wq_completion)bond_dev->name){+.+.}: lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock((work_completion)(&(&nnw->work)->work)); lock(rtnl_mutex); lock((wq_completion)bond_dev->name); *** DEADLOCK *** 1 lock held by syz-executor4/26841: stack backtrace: CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222 check_prev_add kernel/locking/lockdep.c:1862 [inline] check_prevs_add kernel/locking/lockdep.c:1975 [inline] validate_chain kernel/locking/lockdep.c:2416 [inline] __lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412 lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457089 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001 Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Venkat Duvvuru authored
[ Upstream commit a2bf74f4 ] When the driver probe fails, all the resources that were allocated prior to the failure must be freed. However, hwrm dma response memory is not getting freed. This patch fixes the problem described above. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 73f21c65 ] The current netpoll implementation in the bnxt_en driver has problems that may miss TX completion events. bnxt_poll_work() in effect is only handling at most 1 TX packet before exiting. In addition, there may be in flight TX completions that ->poll() may miss even after we fix bnxt_poll_work() to handle all visible TX completions. netpoll may not call ->poll() again and HW may not generate IRQ because the driver does not ARM the IRQ when the budget (0 for netpoll) is reached. We fix it by handling all TX completions and to always ARM the IRQ when we exit ->poll() with 0 budget. Also, the logic to ACK the completion ring in case it is almost filled with TX completions need to be adjusted to take care of the 0 budget case, as discussed with Eric Dumazet <edumazet@google.com> Reported-by:
Song Liu <songliubraving@fb.com> Reviewed-by:
-
- 13 Oct, 2018 18 commits
-
-
Greg Kroah-Hartman authored
-
Zhi Chen authored
commit c8291988 upstream. Length of WMI scan message was not calculated correctly. The allocated buffer was smaller than what we expected. So WMI message corrupted skb_info, which is at the end of skb->data. This fix takes TLV header into account even if the element is zero-length. Crash log: [49.629986] Unhandled kernel unaligned access[#1]: [49.634932] CPU: 0 PID: 1176 Comm: logd Not tainted 4.4.60 #180 [49.641040] task: 83051460 ti: 8329c000 task.ti: 8329c000 [49.646608] $ 0 : 00000000 00000001 80984a80 00000000 [49.652038] $ 4 : 45259e89 8046d484 8046df30 8024ba70 [49.657468] $ 8 : 00000000 804cc4c0 00000001 20306320 [49.662898] $12 : 33322037 000110f2 00000000 31203930 [49.668327] $16 : 82792b40 80984a80 00000001 804207fc [49.673757] $20 : 00000000 0000012c 00000040 80470000 [49.679186] $24 : 00000000 8024af7c [49.684617] $28 : 8329c000 8329db88 00000001 802c58d0 [49.690046] Hi : 00000000 [49.693022] Lo : 453c0000 [49.696013] epc : 800efae4 put_page+0x0/0x58 [49.700615] ra : 802c58d0 skb_release_data+0x148/0x1d4 [49.706184] Status: 1000fc03 KERNEL EXL IE [49.710531] Cause : 00800010 (ExcCode 04) [49.714669] BadVA : 45259e89 [49.717644] PrId : 00019374 (MIPS 24Kc) Signed-off-by:
Zhi Chen <zhichen@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Jan Stancek authored
commit d9e427f6 upstream. commit c7cdff0e ("virtio_balloon: fix deadlock on OOM") changed code to increment vb->num_pfns before call to set_page_pfns(), which used to happen only after. This patch fixes boot hang for me on ppc64le KVM guests. Fixes: c7cdff0e ("virtio_balloon: fix deadlock on OOM") Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit c7cdff0e upstream. fill_balloon doing memory allocations under balloon_lock can cause a deadlock when leak_balloon is called from virtballoon_oom_notify and tries to take same lock. To fix, split page allocation and enqueue and do allocations outside the lock. Here's a detailed analysis of the deadlock by Tetsuo Handa: In leak_balloon(), mutex_lock(&vb->balloon_lock) is called in order to serialize against fill_balloon(). But in fill_balloon(), alloc_page(GFP_HIGHUSER[_MOVABLE] | __GFP_NOMEMALLOC | __GFP_NORETRY) is called with vb->balloon_lock mutex held. Since GFP_HIGHUSER[_MOVABLE] implies __GFP_DIRECT_RECLAIM | __GFP_IO | __GFP_FS, despite __GFP_NORETRY is specified, this allocation attempt might indirectly depend on somebody else's __GFP_DIRECT_RECLAIM memory allocation. And such indirect __GFP_DIRECT_RECLAIM memory allocation might call leak_balloon() via virtballoon_oom_notify() via blocking_notifier_call_chain() callback via out_of_memory() when it reached __alloc_pages_may_oom() and held oom_lock mutex. Since vb->balloon_lock mutex is already held by fill_balloon(), it will cause OOM lockup. Thread1 Thread2 fill_balloon() takes a balloon_lock balloon_page_enqueue() alloc_page(GFP_HIGHUSER_MOVABLE) direct reclaim (__GFP_FS context) takes a fs lock waits for that fs lock alloc_page(GFP_NOFS) __alloc_pages_may_oom() takes the oom_lock out_of_memory() blocking_notifier_call_chain() leak_balloon() tries to take that balloon_lock and deadlocks Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Wang <wei.w.wang@intel.com> Signed-off-by:
-
Ka-Cheong Poon authored
commit f394ad28 upstream. Currently, rds_ib_conn_alloc() calls rds_ib_recv_alloc_caches() without passing along the gfp_t flag. But rds_ib_recv_alloc_caches() and rds_ib_recv_alloc_cache() should take a gfp_t parameter so that rds_ib_recv_alloc_cache() can call alloc_percpu_gfp() using the correct flag instead of calling alloc_percpu(). Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Richard Weinberger authored
commit 37f31b6c upstream. The requested device name can be NULL or an empty string. Check for that and refuse to continue. UBIFS has to do this manually since we cannot use mount_bdev(), which checks for this condition. Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Cong Wang authored
commit 5fe23f26 upstream. There is a race condition between ucma_close() and ucma_resolve_ip(): CPU0 CPU1 ucma_resolve_ip(): ucma_close(): ctx = ucma_get_ctx(file, cmd.id); list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) { mutex_lock(&mut); idr_remove(&ctx_idr, ctx->id); mutex_unlock(&mut); ... mutex_lock(&mut); if (!ctx->closing) { mutex_unlock(&mut); rdma_destroy_id(ctx->cm_id); ... ucma_free_ctx(ctx); ret = rdma_resolve_addr(); ucma_put_ctx(ctx); Before idr_remove(), ucma_get_ctx() could still find the ctx and after rdma_destroy_id(), rdma_resolve_addr() may still access id_priv pointer. Also, ucma_put_ctx() may use ctx after ucma_free_ctx() too. ucma_close() should call ucma_put_ctx() too which tests the refcnt and waits for the last one releasing it. The similar pattern is already used by ucma_destroy_id(). Reported-and-tested-by: syzbot+da2591e115d57a9cbb8b@syzkaller.appspotmail.com Reported-by: syzbot+cfe3c1e8ef634ba8964b@syzkaller.appspotmail.com Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Chao Yu authored
commit d3f07c04 upstream. syzbot found the following crash on: HEAD commit: d9bd94c0bcaa Add linux-next specific files for 20180801 git tree: linux-next console output: https://syzkaller.appspot.com/x/log.txt?x=1001189c400000 kernel config: https://syzkaller.appspot.com/x/.config?x=cc8964ea4d04518c dashboard link: https://syzkaller.appspot.com/bug?extid=c966a82db0b14aa37e81 compiler: gcc (GCC) 8.0.1 20180413 (experimental) Unfortunately, I don't have any reproducer for this crash yet. IMPORTANT: if you fix the bug, please add the following tag to the commit: Reported-by: syzbot+c966a82db0b14aa37e81@syzkaller.appspotmail.com loop7: rw=12288, want=8200, limit=20 netlink: 65342 bytes leftover after parsing attributes in process `syz-executor4'. openvswitch: netlink: Message has 8 unknown bytes. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 1 PID: 7615 Comm: syz-executor7 Not tainted 4.18.0-rc7-next-20180801+ #29 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:188 [inline] RIP: 0010:compound_head include/linux/page-flags.h:142 [inline] RIP: 0010:PageLocked include/linux/page-flags.h:272 [inline] RIP: 0010:f2fs_put_page fs/f2fs/f2fs.h:2011 [inline] RIP: 0010:validate_checkpoint+0x66d/0xec0 fs/f2fs/checkpoint.c:835 Code: e8 58 05 7f fe 4c 8d 6b 80 4d 8d 74 24 08 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 c6 04 02 00 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 f4 06 00 00 4c 89 ea 4d 8b 7c 24 08 48 b8 00 00 RSP: 0018:ffff8801937cebe8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8801937cef30 RCX: ffffc90006035000 RDX: 0000000000000000 RSI: ffffffff82fd9658 RDI: 0000000000000005 RBP: ffff8801937cef58 R08: ffff8801ab254700 R09: fffff94000d9e026 R10: fffff94000d9e026 R11: ffffea0006cf0137 R12: fffffffffffffffb R13: ffff8801937ceeb0 R14: 0000000000000003 R15: ffff880193419b40 FS: 00007f36a61d5700(0000) GS:ffff8801db100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc04ff93000 CR3: 00000001d0562000 CR4: 00000000001426e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: f2fs_get_valid_checkpoint+0x436/0x1ec0 fs/f2fs/checkpoint.c:860 f2fs_fill_super+0x2d42/0x8110 fs/f2fs/super.c:2883 mount_bdev+0x314/0x3e0 fs/super.c:1344 f2fs_mount+0x3c/0x50 fs/f2fs/super.c:3133 legacy_get_tree+0x131/0x460 fs/fs_context.c:729 vfs_get_tree+0x1cb/0x5c0 fs/super.c:1743 do_new_mount fs/namespace.c:2603 [inline] do_mount+0x6f2/0x1e20 fs/namespace.c:2927 ksys_mount+0x12d/0x140 fs/namespace.c:3143 __do_sys_mount fs/namespace.c:3157 [inline] __se_sys_mount fs/namespace.c:3154 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3154 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45943a Code: b8 a6 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 bd 8a fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 9a 8a fb ff c3 66 0f 1f 84 00 00 00 00 00 RSP: 002b:00007f36a61d4a88 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f36a61d4b30 RCX: 000000000045943a RDX: 00007f36a61d4ad0 RSI: 0000000020000100 RDI: 00007f36a61d4af0 RBP: 0000000020000100 R08: 00007f36a61d4b30 R09: 00007f36a61d4ad0 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000013 R13: 0000000000000000 R14: 00000000004c8ea0 R15: 0000000000000000 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace bd8550c129352286 ]--- RIP: 0010:__read_once_size include/linux/compiler.h:188 [inline] RIP: 0010:compound_head include/linux/page-flags.h:142 [inline] RIP: 0010:PageLocked include/linux/page-flags.h:272 [inline] RIP: 0010:f2fs_put_page fs/f2fs/f2fs.h:2011 [inline] RIP: 0010:validate_checkpoint+0x66d/0xec0 fs/f2fs/checkpoint.c:835 Code: e8 58 05 7f fe 4c 8d 6b 80 4d 8d 74 24 08 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 c6 04 02 00 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 f4 06 00 00 4c 89 ea 4d 8b 7c 24 08 48 b8 00 00 RSP: 0018:ffff8801937cebe8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8801937cef30 RCX: ffffc90006035000 RDX: 0000000000000000 RSI: ffffffff82fd9658 RDI: 0000000000000005 netlink: 65342 bytes leftover after parsing attributes in process `syz-executor4'. RBP: ffff8801937cef58 R08: ffff8801ab254700 R09: fffff94000d9e026 openvswitch: netlink: Message has 8 unknown bytes. R10: fffff94000d9e026 R11: ffffea0006cf0137 R12: fffffffffffffffb R13: ffff8801937ceeb0 R14: 0000000000000003 R15: ffff880193419b40 FS: 00007f36a61d5700(0000) GS:ffff8801db100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc04ff93000 CR3: 00000001d0562000 CR4: 00000000001426e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 In validate_checkpoint(), if we failed to call get_checkpoint_version(), we will pass returned invalid page pointer into f2fs_put_page, cause accessing invalid memory, this patch tries to handle error path correctly to fix this issue. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Jiri Olsa authored
commit 06c3f2aa upstream. So that it can be used more widely, like in the next patch, when it will be used to fix a bug in 'perf test' handling of dirent.d_type == DT_UNKNOWN. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171206174535.25380-1-jolsa@kernel.org [ Split from a larger patch, removed needless includes in path.h ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by:
-
Harsh Jain authored
commit add92a81 upstream. Update PCI Id in "cpl_rx_phys_dsgl" header. In case pci_chan_id and tx_chan_id are not derived from same queue, H/W can send request completion indication before completing DMA Transfer. Herbert, It would be good if fix can be merge to stable tree. For 4.14 kernel, It requires some update to avoid mege conficts. Cc: <stable@vger.kernel.org> Signed-off-by:
Harsh Jain <harsh@chelsio.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Vineet Gupta authored
commit c58a584f upstream. Per ARC TLS ABI, r25 is designated TP (thread pointer register). However so far kernel didn't do any special treatment, like setting up usermode r25, even for CLONE_SETTLS. We instead relied on libc runtime to do this, in say clone libc wrapper [1]. This was deliberate to keep kernel ABI agnostic (userspace could potentially change TP, specially for different ARC ISA say ARCompact vs. ARCv2 with different spare registers etc) However userspace setting up r25, after clone syscall opens a race, if child is not scheduled and gets a signal instead. It starts off in userspace not in clone but in a signal handler and anything TP sepcific there such as pthread_self() fails which showed up with uClibc testsuite nptl/tst-kill6 [2] Fix this by having kernel populate r25 to TP value. So this locks in ABI, but it was not going to change anyways, and fwiw is same for both ARCompact (arc700 core) and ARCvs (HS3x cores) [1] https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/tree/libc/sysdeps/linux/arc/clone.S [2] https://github.com/wbx-github/uclibc-ng-test/blob/master/test/nptl/tst-kill6.c Fixes: ARC STAR 9001378481 Cc: stable@vger.kernel.org Reported-by:
Nikita Sobolev <sobolev@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Christophe Leroy authored
commit b45ba4a5 upstream. Commit 51c3c62b ("powerpc: Avoid code patching freed init sections") accesses 'init_mem_is_free' flag too early, before the kernel is relocated. This provokes early boot failure (before the console is active). As it is not necessary to do this verification that early, this patch moves the test into patch_instruction() instead of __patch_instruction(). This modification also has the advantage of avoiding unnecessary remappings. Fixes: 51c3c62b ("powerpc: Avoid code patching freed init sections") Cc: stable@vger.kernel.org # 4.13+ Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Neuling authored
commit 51c3c62b upstream. This stops us from doing code patching in init sections after they've been freed. In this chain: kvm_guest_init() -> kvm_use_magic_page() -> fault_in_pages_readable() -> __get_user() -> __get_user_nocheck() -> barrier_nospec(); We have a code patching location at barrier_nospec() and kvm_guest_init() is an init function. This whole chain gets inlined, so when we free the init section (hence kvm_guest_init()), this code goes away and hence should no longer be patched. We seen this as userspace memory corruption when using a memory checker while doing partition migration testing on powervm (this starts the code patching post migration via /sys/kernel/mobility/migration). In theory, it could also happen when using /sys/kernel/debug/powerpc/barrier_nospec. Cc: stable@vger.kernel.org # 4.13+ Signed-off-by:
Michael Neuling <mikey@neuling.org> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
-
Christophe Leroy authored
commit 8cf4c057 upstream. patch_instruction() uses almost the same sequence as __patch_instruction() This patch refactor it so that patch_instruction() uses __patch_instruction() instead of duplicating code. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
James Smart authored
commit cf25809b upstream. If there are errors during initial controller create, the transport will teardown the partially initialized controller struct and free the ctlr memory. Trouble is - most of those errors can occur due to asynchronous events happening such io timeouts and subsystem connectivity failures. Those failures invoke async workq items to reset the controller and attempt reconnect. Those may be in progress as the main thread frees the ctrl memory, resulting in NULL ptr oops. Prevent this from happening by having the main ctrl failure thread changing state to DELETING followed by synchronously cancelling any pending queued work item. The change of state will prevent the scheduling of resets or reconnect events. Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Yu Wang authored
commit 50e79e25 upstream. If device gone during chip reset, ar->normal_mode_fw.board is not initialized, but ath10k_debug_print_hwfw_info() will try to access its member, which will cause 'kernel NULL pointer' issue. This was found using a faulty device (pci link went down sometimes) in a random insmod/rmmod/other-op test. To fix it, check ar->normal_mode_fw.board before accessing the member. pci 0000:02:00.0: BAR 0: assigned [mem 0xf7400000-0xf75fffff 64bit] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: failed to read device register, device is gone ath10k_pci 0000:02:00.0: failed to wait for target init: -5 ath10k_pci 0000:02:00.0: failed to warm reset: -5 ath10k_pci 0000:02:00.0: firmware crashed during chip reset ath10k_pci 0000:02:00.0: firmware crashed! (uuid 5d018951-b8e1-404a-8fde-923078b4423a) ath10k_pci 0000:02:00.0: (null) target 0x00000000 chip_id 0x00340aff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver api 0 features crc32 00000000 ... BUG: unable to handle kernel NULL pointer dereference at 00000004 ... Call Trace: [<fb4e7882>] ath10k_print_driver_info+0x12/0x20 [ath10k_core] [<fb62b7dd>] ath10k_pci_fw_crashed_dump+0x6d/0x4d0 [ath10k_pci] [<fb629f07>] ? ath10k_pci_sleep.part.19+0x57/0xc0 [ath10k_pci] [<fb62c8ee>] ath10k_pci_hif_power_up+0x14e/0x1b0 [ath10k_pci] [<c10477fb>] ? do_page_fault+0xb/0x10 [<fb4eb934>] ath10k_core_register_work+0x24/0x840 [ath10k_core] [<c18a00d8>] ? netlbl_unlhsh_remove+0x178/0x410 [<c10477f0>] ? __do_page_fault+0x480/0x480 [<c1068e44>] process_one_work+0x114/0x3e0 [<c1069d07>] worker_thread+0x37/0x4a0 [<c106e294>] kthread+0xa4/0xc0 [<c1069cd0>] ? create_worker+0x180/0x180 [<c106e1f0>] ? kthread_park+0x50/0x50 [<c18ab4f7>] ret_from_fork+0x1b/0x28 Code: 78 80 b8 50 09 00 00 00 75 5d 8d 75 94 c7 44 24 08 aa d7 52 fb c7 44 24 04 64 00 00 00 89 34 24 e8 82 52 e2 c5 8b 83 dc 08 00 00 <8b> 50 04 8b 08 31 c0 e8 20 57 e3 c5 89 44 24 10 8b 83 58 09 00 EIP: [<fb4e7754>]- ath10k_debug_print_board_info+0x34/0xb0 [ath10k_core] SS:ESP 0068:f4921d90 CR2: 0000000000000004 Signed-off-by:
Yu Wang <yyuwang@codeaurora.org> Signed-off-by:
-
Carl Huang authored
commit 9ef0f58e upstream. The skb may be freed in tx completion context before trace_ath10k_wmi_cmd is called. This can be easily captured when KASAN(Kernel Address Sanitizer) is enabled. The fix is to move trace_ath10k_wmi_cmd before the send operation. As the ret has no meaning in trace_ath10k_wmi_cmd then, so remove this parameter too. Signed-off-by:
Carl Huang <cjhuang@codeaurora.org> Tested-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
-
Jiri Olsa authored
commit b7a313d8 upstream. The gcc 8 compiler won't compile the python extension code with the following errors (one example): python.c:830:15: error: cast between incompatible function types from \ ‘PyObject * (*)(struct pyrf_evsel *, PyObject *, PyObject *)’ \ uct _object * (*)(struct pyrf_evsel *, struct _object *, struct _object *)’} to \ ‘PyObject * (*)(PyObject *, PyObject *)’ {aka ‘struct _object * (*)(struct _objeuct \ _object *)’} [-Werror=cast-function-type] .ml_meth = (PyCFunction)pyrf_evsel__open, The problem with the PyMethodDef::ml_meth callback is that its type is determined based on the PyMethodDef::ml_flags value, which we set as METH_VARARGS | METH_KEYWORDS. That indicates that the callback is expecting an extra PyObject* arg, and is actually PyCFunctionWithKeywords type, but the base PyMethodDef::ml_meth type stays PyCFunction. Previous gccs did not find this, gcc8 now does. Fixing this by silencing this warning for python.c build. Commiter notes: Do not do that for CC=clang, as it breaks the build in some clang versions, like the ones in fedora up to fedora27: fedora:25:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option] fedora:26:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option] fedora:27:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option] # those have: clang version 3.9.1 (tags/RELEASE_391/final) The one in rawhide accepts that: clang version 6.0.0 (tags/RELEASE_600/final) Signed-off-by:
-
