- 09 May, 2016 9 commits
-
-
Javier Martinez Canillas authored
The clk32k clock is prepared and enabled in twl6040_power() but the clock is left enabled in case of an error while it should be disable/unprepared. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Javier Martinez Canillas authored
The clk_prepare_enable() function can fail so check the return value and propagate the error in case of a failure. Signed-off-by:
-
Mark Brown authored
This driver makes no use of linux/regulator/driver.h which should only be used by drivers implementing a regulator. Since it's unlikely to ever need anything from there remove the include. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Stephen Boyd authored
This flag is a no-op now (see commit 47b0eeb3 "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Stephen Boyd authored
This flag is a no-op now (see commit 47b0eeb3 "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Heikki Krogerus authored
All configurations are lost and the registers will have default values when the hardware is suspended and resumed, so saving the private register space context on suspend, and restoring it on resume. Fixes: 4b45efe8 (mfd: Add support for Intel Sunrisepoint LPSS devices) Cc: stable@vger.kernel.org # v4.3+ Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
There was a static checker warning in wm8400_reg_read() because we were returning u16 and that can't hold the negative error codes. The function isn't used, so let's just delete it. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Charles Keepax authored
Since this commit: commit b9a8a271 ("mfd: make mfd_remove_devices() iterate in reverse order") The order in which the MFD children remove has been reversed, as our driver contains some dependencies between the devices we need to make some changes to ensure the driver unloads cleanly. Signed-off-by:
-
Henry Chen authored
Some sub driver like RTC module need irq domain from parent to create irq mapping when driver initialize. so move mt6397_irq_init() before mfd_add_devices(). Acked-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
Henry Chen <henryc.chen@mediatek.com> Signed-off-by:
-
- 19 Apr, 2016 31 commits
-
-
Brian Norris authored
There are platforms using the ChromeOS embeded controller on ARM64 now, so let's allow using this driver (without having to use COMPILE_TEST). Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
-
Javier Martinez Canillas authored
The driver's init and exit function don't do anything besides adding and deleting the I2C driver so the module_i2c_driver() macro could be used. Currently is not being used because the driver is initialized at subsys initcall level, claiming that this is done to allow consumers devices to use the resources provided by this driver. But dependencies are in DT so manual ordering of init calls is not necessary any more. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
Andi Shyti <andi.shyti@samsung.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Correct smasung.com into samsung.com. Signed-off-by:
-
Linus Walleij authored
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by:
-
Linus Walleij authored
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by:
-
Linus Walleij authored
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by:
-
Linus Walleij authored
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Ben Dooks <ben@fluff.org.uk> Signed-off-by:
-
Linus Walleij authored
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by:
-
Linus Walleij authored
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Linus Walleij authored
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Signed-off-by:
-
Linus Walleij authored
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Paul Parsons <lost.distance@yahoo.com> Signed-off-by:
-
Chen Feng authored
DT bindings for hisilicon HI655x PMIC chip. Signed-off-by:
Chen Feng <puck.chen@hisilicon.com> Signed-off-by:
Fei Wang <w.f@huawei.com> Signed-off-by:
Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by:
Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Mark Brown <broonie@kernel.org> Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Acked-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and remove the call of mfd_remove_devices() from .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Todd Fischer <todd.fischer@ridgerun.com> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Gyungoh Yoo <jack.yoo@skyworksinc.com> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Ingi Kim <ingi2.kim@samsung.com> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and remove the call of mfd_remove_devices() from .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and remove the call of mfd_remove_devices() from .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Chris Zhong <zyw@rock-chips.com> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: John Crispin <blogic@openwrt.org> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. Signed-off-by:
Andreas Werner <andreas.werner@men.de> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Milo Kim <milo.kim@ti.com> Signed-off-by:
Milo Kim <milo.kim@ti.com> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Guodong Xu <guodong.xu@linaro.org> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Matt Porter <mporter@linaro.org> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Laxman Dewangan authored
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Wenyou Yang <wenyou.yang@atmel.com> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
