1. 20 Jul, 2017 6 commits
    • Daniel Borkmann's avatar
      bpf: allow to specify log level and reduce it for test_verifier · d6554904
      Daniel Borkmann authored
      For the test_verifier case, it's quite hard to parse log level 2 to
      figure out what's causing an issue when used to log level 1. We do
      want to use bpf_verify_program() in order to simulate some of the
      tests with strict alignment. So just add an argument to pass the level
      and put it to 1 for test_verifier.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d6554904
    • Daniel Borkmann's avatar
      bpf: fix mixed signed/unsigned derived min/max value bounds · 4cabc5b1
      Daniel Borkmann authored
      Edward reported that there's an issue in min/max value bounds
      tracking when signed and unsigned compares both provide hints
      on limits when having unknown variables. E.g. a program such
      as the following should have been rejected:
      
         0: (7a) *(u64 *)(r10 -8) = 0
         1: (bf) r2 = r10
         2: (07) r2 += -8
         3: (18) r1 = 0xffff8a94cda93400
         5: (85) call bpf_map_lookup_elem#1
         6: (15) if r0 == 0x0 goto pc+7
        R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
         7: (7a) *(u64 *)(r10 -16) = -8
         8: (79) r1 = *(u64 *)(r10 -16)
         9: (b7) r2 = -1
        10: (2d) if r1 > r2 goto pc+3
        R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0
        R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
        11: (65) if r1 s> 0x1 goto pc+2
        R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1
        R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
        12: (0f) r0 += r1
        13: (72) *(u8 *)(r0 +0) = 0
        R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1
        R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
        14: (b7) r0 = 0
        15: (95) exit
      
      What happens is that in the first part ...
      
         8: (79) r1 = *(u64 *)(r10 -16)
         9: (b7) r2 = -1
        10: (2d) if r1 > r2 goto pc+3
      
      ... r1 carries an unsigned value, and is compared as unsigned
      against a register carrying an immediate. Verifier deduces in
      reg_set_min_max() that since the compare is unsigned and operation
      is greater than (>), that in the fall-through/false case, r1's
      minimum bound must be 0 and maximum bound must be r2. Latter is
      larger than the bound and thus max value is reset back to being
      'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now
      'R1=inv,min_value=0'. The subsequent test ...
      
        11: (65) if r1 s> 0x1 goto pc+2
      
      ... is a signed compare of r1 with immediate value 1. Here,
      verifier deduces in reg_set_min_max() that since the compare
      is signed this time and operation is greater than (>), that
      in the fall-through/false case, we can deduce that r1's maximum
      bound must be 1, meaning with prior test, we result in r1 having
      the following state: R1=inv,min_value=0,max_value=1. Given that
      the actual value this holds is -8, the bounds are wrongly deduced.
      When this is being added to r0 which holds the map_value(_adj)
      type, then subsequent store access in above case will go through
      check_mem_access() which invokes check_map_access_adj(), that
      will then probe whether the map memory is in bounds based
      on the min_value and max_value as well as access size since
      the actual unknown value is min_value <= x <= max_value; commit
      fce366a9 ("bpf, verifier: fix alu ops against map_value{,
      _adj} register types") provides some more explanation on the
      semantics.
      
      It's worth to note in this context that in the current code,
      min_value and max_value tracking are used for two things, i)
      dynamic map value access via check_map_access_adj() and since
      commit 06c1c049 ("bpf: allow helpers access to variable memory")
      ii) also enforced at check_helper_mem_access() when passing a
      memory address (pointer to packet, map value, stack) and length
      pair to a helper and the length in this case is an unknown value
      defining an access range through min_value/max_value in that
      case. The min_value/max_value tracking is /not/ used in the
      direct packet access case to track ranges. However, the issue
      also affects case ii), for example, the following crafted program
      based on the same principle must be rejected as well:
      
         0: (b7) r2 = 0
         1: (bf) r3 = r10
         2: (07) r3 += -512
         3: (7a) *(u64 *)(r10 -16) = -8
         4: (79) r4 = *(u64 *)(r10 -16)
         5: (b7) r6 = -1
         6: (2d) if r4 > r6 goto pc+5
        R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512
        R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
         7: (65) if r4 s> 0x1 goto pc+4
        R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512
        R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1
        R10=fp
         8: (07) r4 += 1
         9: (b7) r5 = 0
        10: (6a) *(u16 *)(r10 -512) = 0
        11: (85) call bpf_skb_load_bytes#26
        12: (b7) r0 = 0
        13: (95) exit
      
      Meaning, while we initialize the max_value stack slot that the
      verifier thinks we access in the [1,2] range, in reality we
      pass -7 as length which is interpreted as u32 in the helper.
      Thus, this issue is relevant also for the case of helper ranges.
      Resetting both bounds in check_reg_overflow() in case only one
      of them exceeds limits is also not enough as similar test can be
      created that uses values which are within range, thus also here
      learned min value in r1 is incorrect when mixed with later signed
      test to create a range:
      
         0: (7a) *(u64 *)(r10 -8) = 0
         1: (bf) r2 = r10
         2: (07) r2 += -8
         3: (18) r1 = 0xffff880ad081fa00
         5: (85) call bpf_map_lookup_elem#1
         6: (15) if r0 == 0x0 goto pc+7
        R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
         7: (7a) *(u64 *)(r10 -16) = -8
         8: (79) r1 = *(u64 *)(r10 -16)
         9: (b7) r2 = 2
        10: (3d) if r2 >= r1 goto pc+3
        R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
        R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
        11: (65) if r1 s> 0x4 goto pc+2
        R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0
        R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
        12: (0f) r0 += r1
        13: (72) *(u8 *)(r0 +0) = 0
        R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4
        R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
        14: (b7) r0 = 0
        15: (95) exit
      
      This leaves us with two options for fixing this: i) to invalidate
      all prior learned information once we switch signed context, ii)
      to track min/max signed and unsigned boundaries separately as
      done in [0]. (Given latter introduces major changes throughout
      the whole verifier, it's rather net-next material, thus this
      patch follows option i), meaning we can derive bounds either
      from only signed tests or only unsigned tests.) There is still the
      case of adjust_reg_min_max_vals(), where we adjust bounds on ALU
      operations, meaning programs like the following where boundaries
      on the reg get mixed in context later on when bounds are merged
      on the dst reg must get rejected, too:
      
         0: (7a) *(u64 *)(r10 -8) = 0
         1: (bf) r2 = r10
         2: (07) r2 += -8
         3: (18) r1 = 0xffff89b2bf87ce00
         5: (85) call bpf_map_lookup_elem#1
         6: (15) if r0 == 0x0 goto pc+6
        R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
         7: (7a) *(u64 *)(r10 -16) = -8
         8: (79) r1 = *(u64 *)(r10 -16)
         9: (b7) r2 = 2
        10: (3d) if r2 >= r1 goto pc+2
        R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
        R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
        11: (b7) r7 = 1
        12: (65) if r7 s> 0x0 goto pc+2
        R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
        R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp
        13: (b7) r0 = 0
        14: (95) exit
      
        from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0
        R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp
        15: (0f) r7 += r1
        16: (65) if r7 s> 0x4 goto pc+2
        R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
        R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp
        17: (0f) r0 += r7
        18: (72) *(u8 *)(r0 +0) = 0
        R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3
        R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp
        19: (b7) r0 = 0
        20: (95) exit
      
      Meaning, in adjust_reg_min_max_vals() we must also reset range
      values on the dst when src/dst registers have mixed signed/
      unsigned derived min/max value bounds with one unbounded value
      as otherwise they can be added together deducing false boundaries.
      Once both boundaries are established from either ALU ops or
      compare operations w/o mixing signed/unsigned insns, then they
      can safely be added to other regs also having both boundaries
      established. Adding regs with one unbounded side to a map value
      where the bounded side has been learned w/o mixing ops is
      possible, but the resulting map value won't recover from that,
      meaning such op is considered invalid on the time of actual
      access. Invalid bounds are set on the dst reg in case i) src reg,
      or ii) in case dst reg already had them. The only way to recover
      would be to perform i) ALU ops but only 'add' is allowed on map
      value types or ii) comparisons, but these are disallowed on
      pointers in case they span a range. This is fine as only BPF_JEQ
      and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers
      which potentially turn them into PTR_TO_MAP_VALUE type depending
      on the branch, so only here min/max value cannot be invalidated
      for them.
      
      In terms of state pruning, value_from_signed is considered
      as well in states_equal() when dealing with adjusted map values.
      With regards to breaking existing programs, there is a small
      risk, but use-cases are rather quite narrow where this could
      occur and mixing compares probably unlikely.
      
      Joint work with Josef and Edward.
      
        [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html
      
      Fixes: 48461135 ("bpf: allow access into map value arrays")
      Reported-by: default avatarEdward Cree <ecree@solarflare.com>
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarEdward Cree <ecree@solarflare.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4cabc5b1
    • Sabrina Dubroca's avatar
      ipv6: avoid overflow of offset in ip6_find_1stfragopt · 6399f1fa
      Sabrina Dubroca authored
      In some cases, offset can overflow and can cause an infinite loop in
      ip6_find_1stfragopt(). Make it unsigned int to prevent the overflow, and
      cap it at IPV6_MAXPLEN, since packets larger than that should be invalid.
      
      This problem has been here since before the beginning of git history.
      Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6399f1fa
    • Colin Ian King's avatar
      net: tehuti: don't process data if it has not been copied from userspace · 1e6c22ae
      Colin Ian King authored
      The array data is only populated with valid information from userspace
      if cmd != SIOCDEVPRIVATE, other cases the array contains garbage on
      the stack. The subsequent switch statement acts on a subcommand in
      data[0] which could be any garbage value if cmd is SIOCDEVPRIVATE which
      seems incorrect to me.  Instead, just return EOPNOTSUPP for the case
      where cmd == SIOCDEVPRIVATE to avoid this issue.
      
      As a side note, I suspect that the original intention of the code
      was for this ioctl to work just for cmd == SIOCDEVPRIVATE (and the
      current logic is reversed). However, I don't wont to change the current
      semantics in case any userspace code relies on this existing behaviour.
      
      Detected by CoverityScan, CID#139647 ("Uninitialized scalar variable")
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e6c22ae
    • David Ahern's avatar
      Revert "rtnetlink: Do not generate notifications for CHANGEADDR event" · 3753654e
      David Ahern authored
      This reverts commit cd8966e7.
      
      The duplicate CHANGEADDR event message is sent regardless of link
      status whereas the setlink changes only generate a notification when
      the link is up. Not sending a notification when the link is down breaks
      dhcpcd which only processes hwaddr changes when the link is down.
      
      Fixes reported regression:
          https://bugzilla.kernel.org/show_bug.cgi?id=196355Reported-by: default avatarYaroslav Isakov <yaroslav.isakov@gmail.com>
      Signed-off-by: default avatarDavid Ahern <dsahern@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3753654e
    • Martin Hundebøll's avatar
      net: dsa: mv88e6xxx: Enable CMODE config support for 6390X · bb0a2675
      Martin Hundebøll authored
      Commit f39908d3 ('net: dsa: mv88e6xxx: Set the CMODE for mv88e6390
      ports 9 & 10') added support for setting the CMODE for the 6390X family,
      but only enabled it for 9290 and 6390 - and left out 6390X.
      
      Fix support for setting the CMODE on 6390X also by assigning
      mv88e6390x_port_set_cmode() to the .port_set_cmode function pointer in
      mv88e6390x_ops too.
      
      Fixes: f39908d3 ("net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10")
      Signed-off-by: default avatarMartin Hundebøll <mnhu@prevas.dk>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Reviewed-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb0a2675
  2. 19 Jul, 2017 4 commits
  3. 18 Jul, 2017 6 commits
    • Dan Carpenter's avatar
      netfilter: fix netfilter_net_init() return · 073dd5ad
      Dan Carpenter authored
      We accidentally return an uninitialized variable.
      
      Fixes: cf56c2f8 ("netfilter: remove old pre-netns era hook api")
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Acked-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      073dd5ad
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · 3e16afd3
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      Netfilter fixes for net
      
      The following patchset contains Netfilter fixes for your net tree,
      they are:
      
      1) Missing netlink message sanity check in nfnetlink, patch from
         Mateusz Jurczyk.
      
      2) We now have netfilter per-netns hooks, so let's kill global hook
         infrastructure, this infrastructure is known to be racy with netns.
         We don't care about out of tree modules. Patch from Florian Westphal.
      
      3) find_appropriate_src() is buggy when colissions happens after the
         conversion of the nat bysource to rhashtable. Also from Florian.
      
      4) Remove forward chain in nf_tables arp family, it's useless and it is
         causing quite a bit of confusion, from Florian Westphal.
      
      5) nf_ct_remove_expect() is called with the wrong parameter, causing
         kernel oops, patch from Florian Westphal.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3e16afd3
    • Paolo Abeni's avatar
      udp: preserve skb->dst if required for IP options processing · 0ddf3fb2
      Paolo Abeni authored
      Eric noticed that in udp_recvmsg() we still need to access
      skb->dst while processing the IP options.
      Since commit 0a463c78 ("udp: avoid a cache miss on dequeue")
      skb->dst is no more available at recvmsg() time and bad things
      will happen if we enter the relevant code path.
      
      This commit address the issue, avoid clearing skb->dst if
      any IP options are present into the relevant skb.
      Since the IP CB is contained in the first skb cacheline, we can
      test it to decide to leverage the consume_stateless_skb()
      optimization, without measurable additional cost in the faster
      path.
      
      v1 -> v2: updated commit message tags
      
      Fixes: 0a463c78 ("udp: avoid a cache miss on dequeue")
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Reported-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0ddf3fb2
    • Christophe Jaillet's avatar
      atm: zatm: Fix an error handling path in 'zatm_init_one()' · 799f9172
      Christophe Jaillet authored
      If 'dma_set_mask_and_coherent()' fails, we must undo the previous
      'pci_request_regions()' call.
      Adjust corresponding 'goto' to jump at the right place of the error
      handling path.
      Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      799f9172
    • Alexander Potapenko's avatar
      ipv4: ipv6: initialize treq->txhash in cookie_v[46]_check() · 18bcf290
      Alexander Potapenko authored
      KMSAN reported use of uninitialized memory in skb_set_hash_from_sk(),
      which originated from the TCP request socket created in
      cookie_v6_check():
      
       ==================================================================
       BUG: KMSAN: use of uninitialized memory in tcp_transmit_skb+0xf77/0x3ec0
       CPU: 1 PID: 2949 Comm: syz-execprog Not tainted 4.11.0-rc5+ #2931
       Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
       TCP: request_sock_TCPv6: Possible SYN flooding on port 20028. Sending cookies.  Check SNMP counters.
       Call Trace:
        <IRQ>
        __dump_stack lib/dump_stack.c:16
        dump_stack+0x172/0x1c0 lib/dump_stack.c:52
        kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927
        __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469
        skb_set_hash_from_sk ./include/net/sock.h:2011
        tcp_transmit_skb+0xf77/0x3ec0 net/ipv4/tcp_output.c:983
        tcp_send_ack+0x75b/0x830 net/ipv4/tcp_output.c:3493
        tcp_delack_timer_handler+0x9a6/0xb90 net/ipv4/tcp_timer.c:284
        tcp_delack_timer+0x1b0/0x310 net/ipv4/tcp_timer.c:309
        call_timer_fn+0x240/0x520 kernel/time/timer.c:1268
        expire_timers kernel/time/timer.c:1307
        __run_timers+0xc13/0xf10 kernel/time/timer.c:1601
        run_timer_softirq+0x36/0xa0 kernel/time/timer.c:1614
        __do_softirq+0x485/0x942 kernel/softirq.c:284
        invoke_softirq kernel/softirq.c:364
        irq_exit+0x1fa/0x230 kernel/softirq.c:405
        exiting_irq+0xe/0x10 ./arch/x86/include/asm/apic.h:657
        smp_apic_timer_interrupt+0x5a/0x80 arch/x86/kernel/apic/apic.c:966
        apic_timer_interrupt+0x86/0x90 arch/x86/entry/entry_64.S:489
       RIP: 0010:native_restore_fl ./arch/x86/include/asm/irqflags.h:36
       RIP: 0010:arch_local_irq_restore ./arch/x86/include/asm/irqflags.h:77
       RIP: 0010:__msan_poison_alloca+0xed/0x120 mm/kmsan/kmsan_instr.c:440
       RSP: 0018:ffff880024917cd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
       RAX: 0000000000000246 RBX: ffff8800224c0000 RCX: 0000000000000005
       RDX: 0000000000000004 RSI: ffff880000000000 RDI: ffffea0000b6d770
       RBP: ffff880024917d58 R08: 0000000000000dd8 R09: 0000000000000004
       R10: 0000160000000000 R11: 0000000000000000 R12: ffffffff85abf810
       R13: ffff880024917dd8 R14: 0000000000000010 R15: ffffffff81cabde4
        </IRQ>
        poll_select_copy_remaining+0xac/0x6b0 fs/select.c:293
        SYSC_select+0x4b4/0x4e0 fs/select.c:653
        SyS_select+0x76/0xa0 fs/select.c:634
        entry_SYSCALL_64_fastpath+0x13/0x94 arch/x86/entry/entry_64.S:204
       RIP: 0033:0x4597e7
       RSP: 002b:000000c420037ee0 EFLAGS: 00000246 ORIG_RAX: 0000000000000017
       RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004597e7
       RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
       RBP: 000000c420037ef0 R08: 000000c420037ee0 R09: 0000000000000059
       R10: 0000000000000000 R11: 0000000000000246 R12: 000000000042dc20
       R13: 00000000000000f3 R14: 0000000000000030 R15: 0000000000000003
       chained origin:
        save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59
        kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302
        kmsan_save_stack mm/kmsan/kmsan.c:317
        kmsan_internal_chain_origin+0x12a/0x1f0 mm/kmsan/kmsan.c:547
        __msan_store_shadow_origin_4+0xac/0x110 mm/kmsan/kmsan_instr.c:259
        tcp_create_openreq_child+0x709/0x1ae0 net/ipv4/tcp_minisocks.c:472
        tcp_v6_syn_recv_sock+0x7eb/0x2a30 net/ipv6/tcp_ipv6.c:1103
        tcp_get_cookie_sock+0x136/0x5f0 net/ipv4/syncookies.c:212
        cookie_v6_check+0x17a9/0x1b50 net/ipv6/syncookies.c:245
        tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:989
        tcp_v6_do_rcv+0xdd8/0x1c60 net/ipv6/tcp_ipv6.c:1298
        tcp_v6_rcv+0x41a3/0x4f00 net/ipv6/tcp_ipv6.c:1487
        ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279
        NF_HOOK ./include/linux/netfilter.h:257
        ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322
        dst_input ./include/net/dst.h:492
        ip6_rcv_finish net/ipv6/ip6_input.c:69
        NF_HOOK ./include/linux/netfilter.h:257
        ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203
        __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208
        __netif_receive_skb net/core/dev.c:4246
        process_backlog+0x667/0xba0 net/core/dev.c:4866
        napi_poll net/core/dev.c:5268
        net_rx_action+0xc95/0x1590 net/core/dev.c:5333
        __do_softirq+0x485/0x942 kernel/softirq.c:284
       origin:
        save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59
        kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302
        kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198
        kmsan_kmalloc+0x7f/0xe0 mm/kmsan/kmsan.c:337
        kmem_cache_alloc+0x1c2/0x1e0 mm/slub.c:2766
        reqsk_alloc ./include/net/request_sock.h:87
        inet_reqsk_alloc+0xa4/0x5b0 net/ipv4/tcp_input.c:6200
        cookie_v6_check+0x4f4/0x1b50 net/ipv6/syncookies.c:169
        tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:989
        tcp_v6_do_rcv+0xdd8/0x1c60 net/ipv6/tcp_ipv6.c:1298
        tcp_v6_rcv+0x41a3/0x4f00 net/ipv6/tcp_ipv6.c:1487
        ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279
        NF_HOOK ./include/linux/netfilter.h:257
        ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322
        dst_input ./include/net/dst.h:492
        ip6_rcv_finish net/ipv6/ip6_input.c:69
        NF_HOOK ./include/linux/netfilter.h:257
        ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203
        __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208
        __netif_receive_skb net/core/dev.c:4246
        process_backlog+0x667/0xba0 net/core/dev.c:4866
        napi_poll net/core/dev.c:5268
        net_rx_action+0xc95/0x1590 net/core/dev.c:5333
        __do_softirq+0x485/0x942 kernel/softirq.c:284
       ==================================================================
      
      Similar error is reported for cookie_v4_check().
      
      Fixes: 58d607d3 ("tcp: provide skb->hash to synack packets")
      Signed-off-by: default avatarAlexander Potapenko <glider@google.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      18bcf290
    • Gao Feng's avatar
      ppp: Fix false xmit recursion detect with two ppp devices · e5dadc65
      Gao Feng authored
      The global percpu variable ppp_xmit_recursion is used to detect the ppp
      xmit recursion to avoid the deadlock, which is caused by one CPU tries to
      lock the xmit lock twice. But it would report false recursion when one CPU
      wants to send the skb from two different PPP devices, like one L2TP on the
      PPPoE. It is a normal case actually.
      
      Now use one percpu member of struct ppp instead of the gloable variable to
      detect the xmit recursion of one ppp device.
      
      Fixes: 55454a56 ("ppp: avoid dealock on recursive xmit")
      Signed-off-by: default avatarGao Feng <gfree.wind@vip.163.com>
      Signed-off-by: default avatarLiu Jianying <jianying.liu@ikuai8.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e5dadc65
  4. 17 Jul, 2017 7 commits
  5. 16 Jul, 2017 15 commits
    • David S. Miller's avatar
      Merge branch 'bcmgenet-Fragmented-SKB-corrections' · 533da29b
      David S. Miller authored
      Doug Berger says:
      
      ====================
      bcmgenet: Fragmented SKB corrections
      
      Two issues were observed in a review of the bcmgenet driver support for
      fragmented SKBs which are addressed by this patch set.
      
      The first addresses a problem that could occur if the driver is not able
      to DMA map a fragment of the SKB.  This would be a highly unusual event
      but it would leave the hardware descriptors in an invalid state which
      should be prevented.
      
      The second is a hazard that could occur if the driver is able to reclaim
      the first control block of a fragmented SKB before all of its fragments
      have completed processing by the hardware.  In this case the SKB could
      be freed leading to reuse of memory that is still in use by hardware.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      533da29b
    • Doug Berger's avatar
      net: bcmgenet: Free skb after last Tx frag · f48bed16
      Doug Berger authored
      Since the skb is attached to the first control block of a fragmented
      skb it is possible that the skb could be freed when reclaiming that
      control block before all fragments of the skb have been consumed by
      the hardware and unmapped.
      
      This commit introduces first_cb and last_cb pointers to the skb
      control block used by the driver to keep track of which transmit
      control blocks within a transmit ring are the first and last ones
      associated with the skb.
      
      It then splits the bcmgenet_free_cb() function into transmit
      (bcmgenet_free_tx_cb) and receive (bcmgenet_free_rx_cb) versions
      that can handle the unmapping of dma mapped memory and cleaning up
      the corresponding control block structure so that the skb is only
      freed after the last associated transmit control block is reclaimed.
      
      Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
      Signed-off-by: default avatarDoug Berger <opendmb@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f48bed16
    • Doug Berger's avatar
      net: bcmgenet: Fix unmapping of fragments in bcmgenet_xmit() · 876dbadd
      Doug Berger authored
      In case we fail to map a single fragment, we would be leaving the
      transmit ring populated with stale entries.
      
      This commit introduces the helper function bcmgenet_put_txcb()
      which takes care of rewinding the per-ring write pointer back to
      where we left.
      
      It also consolidates the functionality of bcmgenet_xmit_single()
      and bcmgenet_xmit_frag() into the bcmgenet_xmit() function to
      make the unmapping of control blocks cleaner.
      
      Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
      Suggested-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDoug Berger <opendmb@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      876dbadd
    • Florian Fainelli's avatar
      dt-bindings: net: Remove duplicate NSP Ethernet MAC binding document · ea6c3077
      Florian Fainelli authored
      Commit 07d4510f ("dt-bindings: net: bgmac: add bindings documentation for
      bgmac") added both brcm,amac-nsp.txt and brcm,bgmac-nsp.txt. The former is
      actually the one that got updated and is in use by the bgmac driver while the
      latter is duplicating the former and is not used nor updated.
      
      Fixes: 07d4510f ("dt-bindings: net: bgmac: add bindings documentation for bgmac")
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ea6c3077
    • David S. Miller's avatar
      Merge branch 'isdn-const-pci_device_ids' · 2da73d20
      David S. Miller authored
      Arvind Yadav says:
      
      ====================
      Constify isdn pci_device_id's.
      
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2da73d20
    • Arvind Yadav's avatar
      isdn: avm: c4: constify pci_device_id. · 65f96417
      Arvind Yadav authored
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
        11803	    544	      1	  12348	   303c	isdn/hardware/avm/c4.o
      
      File size After adding 'const':
         text	   data	    bss	    dec	    hex	filename
        11931	    416	      1	  12348	   303c	isdn/hardware/avm/c4.o
      Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      65f96417
    • Arvind Yadav's avatar
      isdn: mISDN: hfcpci: constify pci_device_id. · ed038e7e
      Arvind Yadav authored
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
        21656	   1024	     96	  22776	   58f8	isdn/hardware/mISDN/hfcpci.o
      
      File size After adding 'const':
         text	   data	    bss	    dec	    hex	filename
        22424	    256	     96	  22776	   58f8	isdn/hardware/mISDN/hfcpci.o
      Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ed038e7e
    • Arvind Yadav's avatar
      isdn: mISDN: avmfritz: constify pci_device_id. · 1d9c8fa0
      Arvind Yadav authored
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
         9963	   1936	     16	  11915	   2e8b	isdn/hardware/mISDN/avmfritz.o
      
      File size After adding 'const':
         text	   data	    bss	    dec	    hex	filename
        10091	   1808	     16	  11915	   2e8b	isdn/hardware/mISDN/avmfritz.o
      Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1d9c8fa0
    • Arvind Yadav's avatar
      isdn: mISDN: w6692: constify pci_device_id. · e8336ed0
      Arvind Yadav authored
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
        13959	   4080	     24	  18063	   468f isdn/hardware/mISDN/w6692.o
      
      File size After adding 'const':
         text	   data	    bss	    dec	    hex	filename
        14087	   3952	     24	  18063	   468f isdn/hardware/mISDN/w6692.o
      Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e8336ed0
    • Arvind Yadav's avatar
      isdn: mISDN: hfcmulti: constify pci_device_id. · e3b79fcf
      Arvind Yadav authored
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
        63450	   1536	   1492	  66478	  103ae	isdn/hardware/mISDN/hfcmulti.o
      
      File size After adding 'const':
         text	   data	    bss	    dec	    hex	filename
        64698	    288	   1492	  66478	  103ae	isdn/hardware/mISDN/hfcmulti.o
      Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e3b79fcf
    • Arvind Yadav's avatar
      isdn: mISDN: netjet: constify pci_device_id. · 0d416689
      Arvind Yadav authored
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
        10941	   1776	     16	  12733	   31bd isdn/hardware/mISDN/netjet.o
      
      File size After adding 'const':
         text	   data	    bss	    dec	    hex	filename
        11005	   1712	     16	  12733	   31bd isdn/hardware/mISDN/netjet.o
      Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0d416689
    • Arvind Yadav's avatar
      isdn: eicon: constify pci_device_id. · cf46d351
      Arvind Yadav authored
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
         6224	    655	      8	   6887	   1ae7	isdn/hardware/eicon/divasmain.o
      
      File size After adding 'const':
         text	   data	    bss	    dec	    hex	filename
         6608	    271	      8	   6887	   1ae7	isdn/hardware/eicon/divasmain.o
      Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf46d351
    • Arvind Yadav's avatar
      isdn: hisax: hisax_fcpcipnp: constify pci_device_id. · 6cfc3d86
      Arvind Yadav authored
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
         5989	    576	      0	   6565	   19a5 isdn/hisax/hisax_fcpcipnp.o
      
      File size After adding 'const':
         text	   data	    bss	    dec	    hex	filename
         6085	    480	      0	   6565	   19a5 isdn/hisax/hisax_fcpcipnp.o
      Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6cfc3d86
    • Arvind Yadav's avatar
      isdn: hisax: hfc4s8s_l1: constify pci_device_id. · 3651003d
      Arvind Yadav authored
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
        10512	    536	      4	  11052	   2b2c	drivers/isdn/hisax/hfc4s8s_l1.o
      
      File size After adding 'const':
         text	   data	    bss	    dec	    hex	filename
        10672	    376	      4	  11052	   2b2c	drivers/isdn/hisax/hfc4s8s_l1.o
      Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3651003d
    • Arvind Yadav's avatar
      isdn: hisax: constify pci_device_id. · cd7b03e9
      Arvind Yadav authored
      pci_device_id are not supposed to change at runtime. All functions
      working with pci_device_id provided by <linux/pci.h> work with
      const pci_device_id. So mark the non-const structs as const.
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
        13686	   2064	   4416	  20166	   4ec6	drivers/isdn/hisax/config.o
      
      File size After adding 'const':
         text	   data	    bss	    dec	    hex	filename
        15030	    720	   4416	  20166	   4ec6	drivers/isdn/hisax/config.o
      Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cd7b03e9
  6. 15 Jul, 2017 2 commits