- 05 Sep, 2024 2 commits
-
-
Ryan Walklin authored
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown OEM used in a number of handheld gaming devices made by Anbernic. Previously committed using the OEM serial without a vendor prefix, however following subsequent discussion the preference is to use the integrating device vendor and name where the OEM is unknown. There are 4 RG35XX series devices from Anbernic based on an Allwinner H700 SoC using this panel, with the -Plus variant introduced first. Therefore the -Plus is used as the fallback for the subsequent -H, -2024, and -SP devices. Alter the filename and compatible string to reflect the convention. Fixes: 45b888a8 ("dt-bindings: display: panel: Add WL-355608-A8 panel") Signed-off-by:
Ryan Walklin <ryan@testtoast.com> Acked-by:
Rob Herring (Arm) <robh@kernel.org> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-2-ryan@testtoast.com
-
Mary Guillemard authored
We were allowing any users to create a high priority group without any permission checks. As a result, this was allowing possible denial of service. We now only allow the DRM master or users with the CAP_SYS_NICE capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM. As the sole user of that uAPI lives in Mesa and hardcode a value of MEDIUM [1], this should be safe to do. Additionally, as those checks are performed at the ioctl level, panthor_group_create now only check for priority level validity. [1]https://gitlab.freedesktop.org/mesa/mesa/-/blob/f390835074bdf162a63deb0311d1a6de527f9f89/src/gallium/drivers/panfrost/pan_csf.c#L1038Signed-off-by:
Mary Guillemard <mary.guillemard@collabora.com> Fixes: de854881 ("drm/panthor: Add the scheduler logical block") Cc: stable@vger.kernel.org Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
- 03 Sep, 2024 3 commits
-
-
Dmitry Baryshkov authored
On HDMI connectors which use drm_bridge_connector and DRM_BRIDGE_OP_HDMI IGT chokes on the max_bpc property in several kms_properties tests due to the drm_bridge_connector failing to reset HDMI-related properties. Call __drm_atomic_helper_connector_hdmi_reset() if the drm_bridge_connector has bridge_hdmi. It is impossible to call this function from HDMI bridges, none of the bridge callbacks correspond to the drm_connector_funcs::reset(). Fixes: 6b4468b0 ("drm/bridge-connector: implement glue code for HDMI connector") Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-3-daebde6d9857@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by:
-
Dmitry Baryshkov authored
Kconfig symbols should not declare dependency on DRM_DISPLAY_HELPER. Move all parts of DRM_DISPLAY_HELPER to an if DRM_DISPLAY_HELPER block. It is not possible to make those symbols select DRM_DISPLAY_HELPER because of the link issues when a part of the helper is selected to be built-in, while other part is selected to be as module. In such a case the modular part doesn't get built at all, leading to undefined symbols. The only viable alternative is to split drm_display_helper.ko into several small modules, each of them having their own dependencies. Suggested-by:
-
- 02 Sep, 2024 1 commit
-
-
Matt Coster authored
This caused a measurable memory leak. Although the individual allocations are small, the leaks occurs in a high-usage codepath (remapping or unmapping device memory) so they add up quickly. Fixes: ff5f643d ("drm/imagination: Add GEM and VM related code") Cc: stable@vger.kernel.org Reviewed-by:
Frank Binns <frank.binns@imgtec.com> Link: https://patchwork.freedesktop.org/patch/msgid/35867394-d8ce-4698-a8fd-919a018f1583@imgtec.comSigned-off-by:
Matt Coster <matt.coster@imgtec.com>
-
- 30 Aug, 2024 2 commits
-
-
Dave Airlie authored
This aligns with what open gpu does, the 0x15 hex is just to trick you. Fixes: 176fdcbd ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Reviewed-by:
Ben Skeggs <bskeggs@nvidia.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828023720.1596602-1-airlied@gmail.com
-
hongchi.peng authored
We use komeda_crtc_normalize_zpos to normalize zpos of affected planes to their blending zorder in CU. If there's only one slave plane in affected planes and its layer_split property is enabled, order++ for its split layer, so that when calculating the normalized_zpos of master planes, the split layer of the slave plane is included, but the max_slave_zorder does not include the split layer and keep zero because there's only one slave plane in affacted planes, although we actually use two slave layers in this commit. In most cases, this bug does not result in a commit failure, but assume the following situation: slave_layer 0: zpos = 0, layer split enabled, normalized_zpos = 0;(use slave_layer 2 as its split layer) master_layer 0: zpos = 2, layer_split enabled, normalized_zpos = 2;(use master_layer 2 as its split layer) master_layer 1: zpos = 4, normalized_zpos = 4; master_layer 3: zpos = 5, normalized_zpos = 5; kcrtc_st->max_slave_zorder = 0; When we use master_layer 3 as a input of CU in function komeda_compiz_set_input and check it with function komeda_component_check_input, the parameter idx is equal to normailzed_zpos minus max_slave_zorder, the value of idx is 5 and is euqal to CU's max_active_inputs, so that komeda_component_check_input returns a -EINVAL value. To fix the bug described above, when calculating the max_slave_zorder with the layer_split enabled, count the split layer in this calculation directly. Signed-off-by:hongchi.peng <hongchi.peng@siengine.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
- 28 Aug, 2024 1 commit
-
-
Tvrtko Ursulin authored
We forgot to disable preemption around the write_seqcount_begin/end() pair while updating GPU stats: [ ] WARNING: CPU: 2 PID: 12 at include/linux/seqlock.h:221 __seqprop_assert.isra.0+0x128/0x150 [v3d] [ ] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched] <...snip...> [ ] Call trace: [ ] __seqprop_assert.isra.0+0x128/0x150 [v3d] [ ] v3d_job_start_stats.isra.0+0x90/0x218 [v3d] [ ] v3d_bin_job_run+0x23c/0x388 [v3d] [ ] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched] [ ] process_one_work+0x62c/0xb48 [ ] worker_thread+0x468/0x5b0 [ ] kthread+0x1c4/0x1e0 [ ] ret_from_fork+0x10/0x20 Fix it. Cc: Maíra Canal <mcanal@igalia.com> Cc: stable@vger.kernel.org # v6.10+ Fixes: 6abe93b6 ("drm/v3d: Fix race-condition between sysfs/fdinfo and interrupt handler") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Acked-by:
Maíra Canal <mcanal@igalia.com> Signed-off-by:
-
- 26 Aug, 2024 4 commits
-
-
Alex Deucher authored
In aperture_remove_conflicting_pci_devices(), we currently only call sysfb_disable() on vga class devices. This leads to the following problem when the pimary device is not VGA compatible: 1. A PCI device with a non-VGA class is the boot display 2. That device is probed first and it is not a VGA device so sysfb_disable() is not called, but the device resources are freed by aperture_detach_platform_device() 3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable() 4. NULL pointer dereference via sysfb_disable() since the resources have already been freed by aperture_detach_platform_device() when it was called by the other device. Fix this by passing a device pointer to sysfb_disable() and checking the device to determine if we should execute it or not. v2: Fix build when CONFIG_SCREEN_INFO is not set v3: Move device check into the mutex Drop primary variable in aperture_remove_conflicting_pci_devices() Drop __init on pci sysfb_pci_dev_is_enabled() Fixes: 5ae3716c ("video/aperture: Only remove sysfb on the default vga pci device") Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Helge Deller <deller@gmx.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Zack Rusin authored
Coherent surfaces make only sense if the host renders to them using accelerated apis. Without 3d the entire content of dumb buffers stays in the guest making all of the extra work they're doing to synchronize between guest and host useless. Configurations without 3d also tend to run with very low graphics memory limits. The pinned console fb, mob cursors and graphical login manager tend to run out of 16MB graphics memory that those guests use. Fix it by making sure the coherent dumb buffers are only used on configs with 3d enabled. Signed-off-by:
Zack Rusin <zack.rusin@broadcom.com> Fixes: d6667f0d ("drm/vmwgfx: Fix handling of dumb buffers") Reported-by:
Christian Heusel <christian@heusel.eu> Closes: https://lore.kernel.org/all/0d0330f3-2ac0-4cd5-8075-7f1cbaf72a8e@heusel.eu Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.9+ Link: https://patchwork.freedesktop.org/patch/msgid/20240816183332.31961-4-zack.rusin@broadcom.comReviewed-by:
Martin Krastev <martin.krastev@broadcom.com> Reviewed-by:
Maaz Mombasawala <maaz.mombasawala@broadcom.com> Tested-by:
Benjamin Coddington <bcodding@redhat.com>
-
Zack Rusin authored
Make sure that for external buffers mapping goes through the dma_buf interface instead of trying to access pages directly. External buffers might not provide direct access to readable/writable pages so to make sure the bo's created from external dma_bufs can be read dma_buf interface has to be used. Fixes crashes in IGT's kms_prime with vgem. Regular desktop usage won't trigger this due to the fact that virtual machines will not have multiple GPUs but it enables better test coverage in IGT. Signed-off-by:
-
Zack Rusin authored
The kms paths keep a persistent map active to read and compare the cursor buffer. These maps can race with each other in simple scenario where: a) buffer "a" mapped for update b) buffer "a" mapped for compare c) do the compare d) unmap "a" for compare e) update the cursor f) unmap "a" for update At step "e" the buffer has been unmapped and the read contents is bogus. Prevent unmapping of active read buffers by simply keeping a count of how many paths have currently active maps and unmap only when the count reaches 0. Fixes: 485d98d4 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4") Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.19+ Signed-off-by:
-
- 23 Aug, 2024 1 commit
-
-
Alex Deucher authored
This reverts commit 0ddd2ae5. This patch causes sluggishness and stuttering in graphical apps. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3564 Link: https://www.spinics.net/lists/dri-devel/msg457005.htmlSigned-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 16 Aug, 2024 1 commit
-
-
Dave Airlie authored
Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists. Cc: stable@vger.kernel.org Fixes: 2541626c ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs") Signed-off-by:
-
- 15 Aug, 2024 1 commit
-
-
Alex Bee authored
HDMI analyser shows that the AVI infoframe is no being longer send. The switch to the HDMI connector api should have used the frame content which is now given in the buffer parameter, but instead still uses the (now) empty and superfluous packed_frame variable. Fix it. Fixes: 65548c8f ("drm/rockchip: inno_hdmi: Switch to HDMI connector") Signed-off-by:
Alex Bee <knaerzche@gmail.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240805110855.274140-2-knaerzche@gmail.com
-
- 12 Aug, 2024 3 commits
-
-
Maíra Canal authored
When enabling UBSAN on Raspberry Pi 5, we get the following warning: [ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3 [ 387.903868] index 7 is out of range for type '__u32 [7]' [ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151 [ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched] [ 387.932525] Call trace: [ 387.935296] dump_backtrace+0x170/0x1b8 [ 387.939403] show_stack+0x20/0x38 [ 387.942907] dump_stack_lvl+0x90/0xd0 [ 387.946785] dump_stack+0x18/0x28 [ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0 [ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d] [ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched] [ 387.966862] process_one_work+0x62c/0xb48 [ 387.971296] worker_thread+0x468/0x5b0 [ 387.975317] kthread+0x1c4/0x1e0 [ 387.978818] ret_from_fork+0x10/0x20 [ 387.983014] ---[ end trace ]--- This happens because the UAPI provides only seven configuration registers and we are reading the eighth position of this u32 array. Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by accessing only seven positions on the '__u32 [7]' array. The eighth register exists indeed on V3D 7.1, but it isn't currently used. That being so, let's guarantee that it remains unused and add a note that it could be set in a future patch. Fixes: 0ad5bc1c ("drm/v3d: fix up register addresses for V3D 7.x") Reported-by:
Iago Toral Quiroga <itoral@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809152001.668314-1-mcanal@igalia.com
-
Bouke Sybren Haarsma authored
Add quirk orientation for Ayn Loki Max model. This has been tested by JELOS team that uses their own patched kernel for a while now and confirmed by users in the ChimeraOS discord servers. Signed-off-by:
Bouke Sybren Haarsma <boukehaarsma23@gmail.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Bouke Sybren Haarsma authored
Add quirk orientation for the Ayn Loki Zero. This also has been tested/used by the JELOS team. Signed-off-by:
-
- 08 Aug, 2024 1 commit
-
-
Douglas Anderson authored
The yaml had indentation errors: ./Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml:21:9: [warning] wrong indentation: expected 10 but found 8 (indentation) ./Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml:23:11: [warning] wrong indentation: expected 12 but found 10 (indentation) Fix them. Reported-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240808114407.1.I099e8e9e36407a0785d846b953031d40ea71e559@changeid
-
- 06 Aug, 2024 2 commits
-
-
Simon Ser authored
User-space is allowed to submit any property in an async flip as long as the value doesn't change. However we missed one case: as things stand, the kernel rejects no-op FB_ID changes on non-primary planes. Fix this by changing the conditional and skipping drm_atomic_check_prop_changes() only for FB_ID on the primary plane (instead of skipping for FB_ID on any plane). Fixes: 0e26cc72 ("drm: Refuse to async flip with atomic prop changes") Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
André Almeida <andrealmeid@igalia.com> Tested-by:
Xaver Hugl <xaver.hugl@kde.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Michel Dänzer <michel.daenzer@mailbox.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240731191014.878320-1-contact@emersion.fr
-
Rob Clark authored
The Samsung ATNA45DC02 panel is an AMOLED eDP panel, similar to the existing ATNA45AF01 and ATNA33XC20 panel but with a higher resolution. Signed-off-by:
Rob Clark <robdclark@chromium.org> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
-
- 05 Aug, 2024 2 commits
-
-
Cristian Ciocaltea authored
The recent switch to drmm allocation in drm_bridge_connector_init() may cause double free on bridge_connector in some of the error handling paths. Drop the explicit kfree() calls on bridge_connector. Fixes: c12907be ("drm/bridge-connector: switch to using drmm allocations") Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Signed-off-by:
default avatarRobert Foss <rfoss@kernel.org> Reviewed-by:
-
Arnd Bergmann authored
Compile-testing with CONFIG_MMU disabled causes a link error in omapdrm: arm-linux-gnueabi-ld: drivers/gpu/drm/omapdrm/omap_gem.o: in function `omap_gem_fault_2d': omap_gem.c:(.text+0x36e): undefined reference to `vmf_insert_mixed' arm-linux-gnueabi-ld: drivers/gpu/drm/omapdrm/omap_gem.o: in function `omap_gem_fault': omap_gem.c:(.text+0x74a): undefined reference to `vmf_insert_mixed' Avoid this by adding a Kconfig dependency. Fixes: dc6fcaab ("drm/omap: Allow build with COMPILE_TEST=y") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240719095942.3841009-1-arnd@kernel.org
-
- 02 Aug, 2024 2 commits
-
-
Dave Airlie authored
The test here creates an sg table, but never maps it, when we get to drm_gem_shmem_free, the helper tries to unmap and this causes warnings on some platforms and debug kernels. This also sets a 64-bit dma mask, as I see an swiotlb warning if I stick with the default 32-bit one. Fixes: 93032ae6 ("drm/test: add a test suite for GEM objects backed by shmem") Cc: stable@vger.kernel.org Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Marco Pagani <marpagan@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240715083551.777807-1-airlied@gmail.comSigned-off-by:
-
Ma Ke authored
In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is assigned to modeset->mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Cc: stable@vger.kernel.org Fixes: cf13909a ("drm/fb-helper: Move out modeset config code") Signed-off-by:
Ma Ke <make24@iscas.ac.cn> Reviewed-by:
-
- 31 Jul, 2024 3 commits
-
-
Dave Airlie authored
When a buffer is evicted for memory pressure or TTM evict all, the placement is set to the eviction domain, this means the buffer never gets revalidated on the next exec to the correct domain. I think this should be fine to use the initial domain from the object creation, as least with VM_BIND this won't change after init so this should be the correct answer. Fixes: b88baab8 ("drm/nouveau: implement new VM_BIND uAPI") Cc: Danilo Krummrich <dakr@redhat.com> Cc: <stable@vger.kernel.org> # v6.6 Signed-off-by:
-
André Almeida authored
Allow userspace to use damage clips with atomic async flips. Damage clips are useful for partial plane updates, which can be helpful for clients that want to do flips asynchronously. Fixes: 0e26cc72 ("drm: Refuse to async flip with atomic prop changes") Signed-off-by:
-
André Almeida authored
Allow userspace to use explicit synchronization with atomic async flips. That means that the flip will wait for some hardware fence, and then will flip as soon as possible (async) in regard of the vblank. Fixes: 0e26cc72 ("drm: Refuse to async flip with atomic prop changes") Signed-off-by:
-
- 30 Jul, 2024 3 commits
-
-
Thomas Zimmermann authored
Power up the ASTDP connector for connection status detection if the connector is not active. Keep it powered if a display is attached. This fixes a bug where the connector does not come back after disconnecting the display. The encoder's atomic_disable turns off power on the physical connector. Further HPD reads will fail, thus preventing the driver from detecting re-connected displays. For connectors that are actively used, only test the HPD flag without touching power. Fixes: f81bb0ac ("drm/ast: report connection status on Display Port.") Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-2-tzimmermann@suse.de
-
Maxime Ripard authored
There's a patch left in drm-misc-next-fixes, let's bring it into drm-misc-fixes. Signed-off-by: -
Maxime Ripard authored
Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1. Signed-off-by:
-
- 29 Jul, 2024 2 commits
-
-
Zenghui Yu authored
Even if a vgem device is configured in, we will skip the import_vgem_fd() test almost every time. TAP version 13 1..11 # Testing heap: system # ======================================= # Testing allocation and importing: ok 1 # SKIP Could not open vgem -1 The problem is that we use the DRM_IOCTL_VERSION ioctl to query the driver version information but leave the name field a non-null-terminated string. Terminate it properly to actually test against the vgem device. While at it, let's check the length of the driver name is exactly 4 bytes and return early otherwise (in case there is a name like "vgemfoo" that gets converted to "vgem\0" unexpectedly). Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Dan Carpenter authored
This function accidentally returns zero/success on the failure path. It leads to locking issues and an uninitialized *map_copy in the caller. Fixes: b4b0193e ("drm/fbdev-generic: Fix locking with drm_client_buffer_vmap_local()") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by:
-
- 28 Jul, 2024 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix RPM package build error caused by an incorrect locale setup - Mark modules.weakdep as ghost in RPM package - Fix the odd combination of -S and -c in stack protector scripts, which is an error with the latest Clang * tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Fix '-S -c' in x86 stack protector scripts kbuild: rpm-pkg: ghost modules.weakdep file kbuild: rpm-pkg: Fix C locale setup
-
Linus Torvalds authored
This simplifies the min_t() and max_t() macros by no longer making them work in the context of a C constant expression. That means that you can no longer use them for static initializers or for array sizes in type definitions, but there were only a couple of such uses, and all of them were converted (famous last words) to use MIN_T/MAX_T instead. Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit 3a7e02c0 ("minmax: avoid overly complicated constant expressions in VM code") added the simpler MIN_T/MAX_T macros in order to avoid some excessive expansion from the rather complicated regular min/max macros. The complexity of those macros stems from two issues: (a) trying to use them in situations that require a C constant expression (in static initializers and for array sizes) (b) the type sanity checking and MIN_T/MAX_T avoids both of these issues. Now, in the whole (long) discussion about all this, it was pointed out that the whole type sanity checking is entirely unnecessary for min_t/max_t which get a fixed type that the comparison is done in. But that still leaves min_t/max_t unnecessarily complicated due to worries about the C constant expression case. However, it turns out that there really aren't very many cases that use min_t/max_t for this, and we can just force-convert those. This does exactly that. Which in turn will then allow for much simpler implementations of min_t()/max_t(). All the usual "macros in all upper case will evaluate the arguments multiple times" rules apply. We should do all the same things for the regular min/max() vs MIN/MAX() cases, but that has the added complexity of various drivers defining their own local versions of MIN/MAX, so that needs another level of fixes first. Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/ Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: - Many fixes for power-cut issues by Zhihao Cheng - Another ubiblock error path fix - ubiblock section mismatch fix - Misc fixes all over the place * tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Fix ubi_init() ubiblock_exit() section mismatch ubifs: add check for crypto_shash_tfm_digest ubifs: Fix inconsistent inode size when powercut happens during appendant writing ubi: block: fix null-pointer-dereference in ubiblock_create() ubifs: fix kernel-doc warnings ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity mtd: ubi: Restore missing cleanup on ubi_init() failure path ubifs: dbg_orphan_check: Fix missed key type checking ubifs: Fix unattached inode when powercut happens in creating ubifs: Fix space leak when powercut happens in linking tmpfile ubifs: Move ui->data initialization after initializing security ubifs: Fix adding orphan entry twice for the same inode ubifs: Remove insert_dead_orphan from replaying orphan process Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path" ubifs: Don't add xattr inode into orphan area ubifs: Fix unattached xattr inode if powercut happens after deleting mtd: ubi: avoid expensive do_div() on 32-bit machines mtd: ubi: make ubi_class constant ubi: eba: properly rollback inside self_check_eba
-
Nathan Chancellor authored
After a recent change in clang to stop consuming all instances of '-S' and '-c' [1], the stack protector scripts break due to the kernel's use of -Werror=unused-command-line-argument to catch cases where flags are not being properly consumed by the compiler driver: $ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument] This results in CONFIG_STACKPROTECTOR getting disabled because CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set. '-c' and '-S' both instruct the compiler to stop at different stages of the pipeline ('-S' after compiling, '-c' after assembling), so having them present together in the same command makes little sense. In this case, the test wants to stop before assembling because it is looking at the textual assembly output of the compiler for either '%fs' or '%gs', so remove '-c' from the list of arguments to resolve the error. All versions of GCC continue to work after this change, along with versions of clang that do or do not contain the change mentioned above. Cc: stable@vger.kernel.org Fixes: 4f7fd4d7 ("[PATCH] Add the -fstack-protector option to the CFLAGS") Fixes: 60a5317f ("x86: implement x86_32 stack protector") Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1] Signed-off-by:Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
