- 19 Jul, 2007 40 commits
-
-
Andrew Morton authored
page-writeback accounting is presently performed in the page-flags macros. This is inconsistent and a bit ugly and makes it awkward to implement per-backing_dev under-writeback page accounting. So move this accounting down to the callsite(s). Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
clocksource_adjust() has a clock argument, which shadows the file global clock variable. Fix this up. Signed-off-by:
-
Greg Ungerer authored
Remove is_in_rom() function. It doesn't actually serve the purpose it was intended to. If you look at the use of it _access_ok() (which is the only use of it) then it is obvious that most of memory is marked as access_ok. No point having is_in_rom() then, so remove it. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Greg Ungerer authored
In die_if_kernel() start the stack dump at the exception-time SP, not at the SP with all the saved registers; the stack below exception-time sp contains only exception-saved values and is already printed in details just before. Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
Greg Ungerer authored
Change the m68knommu irq handling to use the generic irq framework. Signed-off-by:
-
Akinobu Mita authored
Use appropriate accessor function to set compound page destructor function. Cc: William Irwin <wli@holomorphy.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Adam Litke <agl@us.ibm.com> Signed-off-by:
-
Hugh Dickins authored
The fix to that race in alloc_fresh_huge_page() which could give an illegal node ID did not need nid_lock at all: the fix was to replace static int nid by static int prev_nid and do the work on local int nid. nid_lock did make sure that racers strictly roundrobin the nodes, but that's not something we need to enforce strictly. Kill nid_lock. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Alexey Dobriyan authored
There is check_reset() -- global function in drivers/isdn/sc/ There is check_reset -- variable holding module param in aacraid driver. On allyesconfig they clash with: LD drivers/built-in.o drivers/isdn/built-in.o: In function `check_reset': : multiple definition of `check_reset' drivers/scsi/built-in.o:(.data+0xe458): first defined here ld: Warning: size of symbol `check_reset' changed from 4 in drivers/scsi/built-in.o to 219 in drivers/isdn/built-in.o ld: Warning: type of symbol `check_reset' changed from 1 to 2 in drivers/isdn/built-in.o Rename the former. Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Benjamin Herrenschmidt authored
I've noticed lots of failures of vmalloc_32 on machines where it shouldn't have failed unless it was doing an atomic operation. Looking closely, I noticed that: #if defined(CONFIG_64BIT) && defined(CONFIG_ZONE_DMA32) #define GFP_VMALLOC32 GFP_DMA32 #elif defined(CONFIG_64BIT) && defined(CONFIG_ZONE_DMA) #define GFP_VMALLOC32 GFP_DMA #else #define GFP_VMALLOC32 GFP_KERNEL #endif Which seems to be incorrect, it should always -or- in the DMA flags on top of GFP_KERNEL, thus this patch. This fixes frequent errors launchin X with the nouveau DRM for example. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@suse.de> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
-
David Howells authored
Work around a possible bug in the FRV compiler. What appears to be happening is that gcc resolves the __builtin_constant_p() in kmalloc() to true, but then fails to reduce the therefore constant conditions in the if-statements it guards to constant results. When compiling with -O2 or -Os, one single spurious error crops up in cpuup_callback() in mm/slab.c. This can be avoided by making the memsize variable const. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrew Morton authored
mm/hugetlb.c: In function `dequeue_huge_page': mm/hugetlb.c:72: warning: 'nid' might be used uninitialized in this function Cc: Christoph Lameter <clameter@sgi.com> Cc: Adam Litke <agl@us.ibm.com> Cc: David Gibson <hermes@gibson.dropbear.id.au> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by:
-
Yoann Padioleau authored
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by:
Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by:
Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by:
Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by:
Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by:
Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Johannes Berg authored
The print_stack_trace macro in stacktrace.h has a wrong number of arguments, fix it. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by:
-
Johannes Berg authored
When I started adding support for lockdep to 64-bit powerpc, I got a lockdep_init_error and with this patch was able to pinpoint why and where to put lockdep_init(). Let's support this generally for others adding lockdep support to their architecture. Signed-off-by:
-
Peter Zijlstra authored
optionally add class->name_version and class->subclass to the class name Signed-off-by:
-
Peter Zijlstra authored
__acquire | lock _____ | \ | __contended | | | wait | _______/ |/ | __acquired | __release | unlock We measure acquisition and contention bouncing. This is done by recording a cpu stamp in each lock instance. Contention bouncing requires the cpu stamp to be set on acquisition. Hence we move __acquired into the generic path. __acquired is then used to measure acquisition bouncing by comparing the current cpu with the old stamp before replacing it. __contended is used to measure contention bouncing (only useful for preemptable locks) [akpm@linux-foundation.org: cleanups] Signed-off-by:Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Peter Zijlstra authored
the two init sites resulted in inconsistend names for the lock class. Signed-off-by:
-
Peter Zijlstra authored
- update the copyright notices - use the default hash function - fix a thinko in a BUILD_BUG_ON - add a WARN_ON to spot inconsitent naming - fix a termination issue in /proc/lock_stat [akpm@linux-foundation.org: cleanups] Signed-off-by:
-
Peter Zijlstra authored
Call the new lockstat tracking functions from the various lock primitives. Signed-off-by:
Jason Baron <jbaron@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
Present all this fancy new lock statistics information: *warning, _wide_ output ahead* (output edited for purpose of brevity) # cat /proc/lock_stat lock_stat version 0.1 ----------------------------------------------------------------------------------------------------------------------------------------------------------------- class name contentions waittime-min waittime-max waittime-total acquisitions holdtime-min holdtime-max holdtime-total ----------------------------------------------------------------------------------------------------------------------------------------------------------------- &inode->i_mutex: 14458 6.57 398832.75 2469412.23 6768876 0.34 11398383.65 339410830.89 --------------- &inode->i_mutex 4486 [<ffffffff802a08f9>] pipe_wait+0x86/0x8d &inode->i_mutex 0 [<ffffffff802a01e8>] pipe_write_fasync+0x29/0x5d &inode->i_mutex 0 [<ffffffff802a0e18>] pipe_read+0x74/0x3a5 &inode->i_mutex 0 [<ffffffff802a1a6a>] do_lookup+0x81/0x1ae ................................................................................................................................................................. &inode->i_data.tree_lock-W: 491 0.27 62.47 493.89 2477833 0.39 468.89 1146584.25 &inode->i_data.tree_lock-R: 65 0.44 4.27 48.78 26288792 0.36 184.62 10197458.24 -------------------------- &inode->i_data.tree_lock 46 [<ffffffff80277095>] __do_page_cache_readahead+0x69/0x24f &inode->i_data.tree_lock 31 [<ffffffff8026f9fb>] add_to_page_cache+0x31/0xba &inode->i_data.tree_lock 0 [<ffffffff802770ee>] __do_page_cache_readahead+0xc2/0x24f &inode->i_data.tree_lock 0 [<ffffffff8026f6e4>] find_get_page+0x1a/0x58 ................................................................................................................................................................. proc_inum_idr.lock: 0 0.00 0.00 0.00 36 0.00 65.60 148.26 proc_subdir_lock: 0 0.00 0.00 0.00 3049859 0.00 106.81 1563212.42 shrinker_rwsem-W: 0 0.00 0.00 0.00 5 0.00 1.73 3.68 shrinker_rwsem-R: 0 0.00 0.00 0.00 633 2.57 246.57 10909.76 'contentions' and 'acquisitions' are the number of such events measured (since the last reset). The waittime- and holdtime- (min, max, total) numbers are presented in microseconds. If there are any contention points, the lock class is presented in the block format (as i_mutex and tree_lock above), otherwise a single line of output is presented. The output is sorted on absolute number of contentions (read + write), this should get the worst offenders presented first, so that: # grep : /proc/lock_stat | head will quickly show who's bad. The stats can be reset using: # echo 0 > /proc/lock_stat [bunk@stusta.de: make 2 functions static] [akpm@linux-foundation.org: fix printk warning] Signed-off-by:Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Peter Zijlstra authored
Introduce the core lock statistics code. Lock statistics provides lock wait-time and hold-time (as well as the count of corresponding contention and acquisitions events). Also, the first few call-sites that encounter contention are tracked. Lock wait-time is the time spent waiting on the lock. This provides insight into the locking scheme, that is, a heavily contended lock is indicative of a too coarse locking scheme. Lock hold-time is the duration the lock was held, this provides a reference for the wait-time numbers, so they can be put into perspective. 1) lock 2) ... do stuff .. unlock 3) The time between 1 and 2 is the wait-time. The time between 2 and 3 is the hold-time. The lockdep held-lock tracking code is reused, because it already collects locks into meaningful groups (classes), and because it is an existing infrastructure for lock instrumentation. Currently lockdep tracks lock acquisition with two hooks: lock() lock_acquire() _lock() ... code protected by lock ... unlock() lock_release() _unlock() We need to extend this with two more hooks, in order to measure contention. lock_contended() - used to measure contention events lock_acquired() - completion of the contention These are then placed the following way: lock() lock_acquire() if (!_try_lock()) lock_contended() _lock() lock_acquired() ... do locked stuff ... unlock() lock_release() _unlock() (Note: the try_lock() 'trick' is used to avoid instrumenting all platform dependent lock primitive implementations.) It is also possible to toggle the two lockdep features at runtime using: /proc/sys/kernel/prove_locking /proc/sys/kernel/lock_stat (esp. turning off the O(n^2) prove_locking functionaliy can help) [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: nuke unneeded ifdefs] Signed-off-by: -
Peter Zijlstra authored
Move code around to get fewer but larger #ifdef sections. Break some in-function #ifdefs out into their own functions. Signed-off-by:
-
Peter Zijlstra authored
Ensure that all of the lock dependency tracking code is under CONFIG_PROVE_LOCKING. This allows us to use the held lock tracking code for other purposes. Signed-off-by:
-
Peter Zijlstra authored
Use the lockdep infrastructure to track lock contention and other lock statistics. It tracks lock contention events, and the first four unique call-sites that encountered contention. It also measures lock wait-time and hold-time in nanoseconds. The minimum and maximum times are tracked, as well as a total (which together with the number of event can give the avg). All statistics are done per lock class, per write (exclusive state) and per read (shared state). The statistics are collected per-cpu, so that the collection overhead is minimized via having no global cachemisses. This new lock statistics feature is independent of the lock dependency checking traditionally done by lockdep; it just shares the lock tracking code. It is also possible to enable both and runtime disabled either component - thereby avoiding the O(n^2) lock chain walks for instance. This patch: raw_spinlock_t should not use lockdep (and doesn't) since lockdep itself relies on it. Signed-off-by:
-
Jan Harkes authored
Signed-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by:
-
Jan Harkes authored
Similar information can easily be obtained with strace -c. Signed-off-by:
-
Jan Harkes authored
The sb_info structure only contains a single pointer to the character device, there is no need for the added indirection. Signed-off-by:
-
Jan Harkes authored
Signed-off-by:
-
Jan Harkes authored
Signed-off-by:
-
Jan Harkes authored
Venus returns an ENOENT error on open, so we shouldn't try to grab the filehandle for the returned fd. Signed-off-by:
-
Jan Harkes authored
Signed-off-by:
-
Jan Harkes authored
Signed-off-by:
-
Jan Harkes authored
We ignore signals for about 30 seconds to give userspace a chance to see the upcall. As we did not block signals we ended up in a busy loop for the remainder of the period when a signal is received. Signed-off-by:
-
Jan Harkes authored
Make the code that processes upcall responses more straightforward, uncovered at least one bad assumption. We trusted that vc_inuse would be 0 when upcalls are aborted, however the device may have been reopened. Signed-off-by:
-
Jan Harkes authored
- Make sure device index is not a negative number. - Unlink queued requests when the device is closed to avoid passing them to the next opener. Signed-off-by:
-
Jan Harkes authored
Signed-off-by:
-
Jan Harkes authored
Set MS_NOATIME flag to avoid unnecessary calls when the coda inode is accessed. Also, set statfs.f_bsize to 4k. 1k is obviously too small for the suggested IO size. Signed-off-by:
-
Jan Harkes authored
A directory without children may still be busy when it is the cwd for some process. We can safely remove such a directory because the VFS prevents further operations. Also we don't need to call d_delete as it is already called in vfs_rmdir. Signed-off-by:
-
Jan Harkes authored
The Coda client sets the directory link count to 1 when it isn't sure how many subdirectories we have. In this case we shouldn't change the link count in the kernel when a subdirectory is created or removed. Signed-off-by:
-
