- 30 Jan, 2013 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl fixes from Linus Walleij: "This is a late pinctrl fix pull request, we had to revert out the pinctrl-single GPIO backend, because of, well, design issues. We're cooking a better thing for the next cycle. - Revert gpio request/free backend, new patch set in the works, will be for v3.9. Get this old cruft out before anyone hurts himself on it. - Kconfig buzz - Various compile warnings - MPP6 value for the Kirkwood" * tag 'pinctrl-fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: nomadik: nmk_prcm_gpiocr_get_mode may be unused pinctrl: exynos: don't mark probing functions as __init Revert "pinctrl: single: support gpio request and free" pinctrl: mvebu: fix MPP6 value for kirkwood driver pinctrl: mvebu: Fix compiler warnings pinctrl: pinctrl-mxs: Fix variables' definition type pinctrl: samsung: removing duplicated condition for PINCTRL_SAMSUNG
-
- 29 Jan, 2013 7 commits
-
-
Arnd Bergmann authored
nmk_prcm_gpiocr_get_mode is only needed for debugfs output at the moment, which can be compile-time disabled. Marking the function __maybe_unused still gives us compile-time coverage, but avoids a gcc warning. Without this patch, building nhk8815_defconfig results in: drivers/pinctrl/pinctrl-nomadik.c:676:12: warning: 'nmk_prcm_gpiocr_get_mode' defined but not used [-Wunused-function] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jean-Nicolas Graux <jean-nicolas.graux@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Arnd Bergmann authored
Functions called from a driver probe() method must not be marked __init, because they may get called after the init phase is done, when the device shows up late, or because of deferred probing. Without this patch, building exynos_defconfig results in multiple warnings like: WARNING: drivers/pinctrl/built-in.o(.text+0x51bc): Section mismatch in reference from the function exynos5440_pinctrl_probe() to the function .init.text:exynos5440_gpiolib_register() The function exynos5440_pinctrl_probe() references the function __init exynos5440_gpiolib_register(). This is often because exynos5440_pinctrl_probe lacks a __init annotation or the annotation of exynos5440_gpiolib_register is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Tomasz Figa <t.figa@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator fixes from Mark Brown: "Fairly small stuff - a build failure fix for ST platforms, an error checking fix and an update to the MAINTAINERS file for Liam." * tag 'regulator-3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps80031: Use IS_ERR to check return value of regulator_register() regulators: db8500: Fix compile failure for drivers/regulator/dbx500-prcmu.c regulator: MAINTAINERS: update email address
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Benjamin Herrenschmidt: "Whenever you have a chance between two dives, you might want to consider pulling my merge branch to pickup a few fixes for 3.8 that have been accumulating for the last couple of weeks (I was myself travelling then on vacation). Nothing major, just a handful of powerpc bug fixes that I consider worth getting in before 3.8 goes final." And I'll have everybody know that I'm not diving for several days yet. Snif. * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Max next_tb to prevent from replaying timer interrupt powerpc: kernel/kgdb.c: Fix memory leakage powerpc/book3e: Disable interrupt after preempt_schedule_irq powerpc/oprofile: Fix error in oprofile power7_marked_instr_event() function powerpc/pasemi: Fix crash on reboot powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning for ppc32
-
- 28 Jan, 2013 23 commits
-
-
Tiejun Chen authored
With lazy interrupt, we always call __check_irq_replaysome with decrementers_next_tb to check if we need to replay timer interrupt. So in hotplug case we also need to set decrementers_next_tb as MAX to make sure __check_irq_replay don't replay timer interrupt when return as we expect, otherwise we'll trap here infinitely. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Cong Ding authored
the variable backup_current_thread_info isn't freed before existing the function. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Tiejun Chen authored
In preempt case current arch_local_irq_restore() from preempt_schedule_irq() may enable hard interrupt but we really should disable interrupts when we return from the interrupt, and so that we don't get interrupted after loading SRR0/1. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Carl E. Love authored
The calculation for the left shift of the mask OPROFILE_PM_PMCSEL_MSK has an error. The calculation is should be to shift left by (max_cntrs - cntr) times the width of the pmsel field width. However, the #define OPROFILE_MAX_PMC_NUM was used instead of OPROFILE_PMSEL_FIELD_WIDTH. This patch fixes the calculation. Signed-off-by: Carl Love <cel@us.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Steven Rostedt authored
commit f96972f2 "kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()" added a call to disable_nonboot_cpus() on kernel_restart(), which tries to shutdown all the CPUs except the first one. The issue with the PA Semi, is that it does not support CPU hotplug. When the call is made to __cpu_down(), it calls the notifiers CPU_DOWN_PREPARE, and then tries to take the CPU down. One of the notifiers to the CPU hotplug code, is the cpufreq. The DOWN_PREPARE will call __cpufreq_remove_dev() which calls cpufreq_driver->exit. The PA Semi exit handler unmaps regions of I/O that is used by an interrupt that goes off constantly (system_reset_common, but it goes off during normal system operations too). I'm not sure exactly what this interrupt does. Running a simple function trace, you can see it goes off quite a bit: # tracer: function # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <idle>-0 [001] 1558.859363: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.860112: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.861109: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [001] 1558.861361: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.861437: .pasemi_system_reset_exception <-.system_reset_exception When the region is unmapped, the system crashes with: Disabling non-boot CPUs ... Error taking CPU1 down: -38 Unable to handle kernel paging request for data at address 0xd0000800903a0100 Faulting instruction address: 0xc000000000055fcc Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=64 NUMA PA Semi PWRficient Modules linked in: shpchp NIP: c000000000055fcc LR: c000000000055fb4 CTR: c0000000000df1fc REGS: c0000000012175d0 TRAP: 0300 Not tainted (3.8.0-rc4-test-dirty) MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 24000088 XER: 00000000 SOFTE: 0 DAR: d0000800903a0100, DSISR: 42000000 TASK = c0000000010e9008[0] 'swapper/0' THREAD: c000000001214000 CPU: 0 GPR00: d0000800903a0000 c000000001217850 c0000000012167e0 0000000000000000 GPR04: 0000000000000000 0000000000000724 0000000000000724 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000001 0000000000a70000 GPR12: 0000000024000080 c00000000fff0000 ffffffffffffffff 000000003ffffae0 GPR16: ffffffffffffffff 0000000000a21198 0000000000000060 0000000000000000 GPR20: 00000000008fdd35 0000000000a21258 000000003ffffaf0 0000000000000417 GPR24: 0000000000a226d0 c000000000000000 0000000000000000 0000000000000000 GPR28: c00000000138b358 0000000000000000 c000000001144818 d0000800903a0100 NIP [c000000000055fcc] .set_astate+0x5c/0xa4 LR [c000000000055fb4] .set_astate+0x44/0xa4 Call Trace: [c000000001217850] [c000000000055fb4] .set_astate+0x44/0xa4 (unreliable) [c0000000012178f0] [c00000000005647c] .restore_astate+0x2c/0x34 [c000000001217980] [c000000000054668] .pasemi_system_reset_exception+0x6c/0x88 [c000000001217a00] [c000000000019ef0] .system_reset_exception+0x48/0x84 [c000000001217a80] [c000000000001e40] system_reset_common+0x140/0x180 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://neil.brown.name/mdLinus Torvalds authored
Pull dmraid fix from NeilBrown: "Just one fix for md in 3.8 dmraid assess redundancy and replacements slightly inaccurately which could lead to some degraded arrays failing to assemble." * tag 'md-3.8-fixes' of git://neil.brown.name/md: DM-RAID: Fix RAID10's check for sufficient redundancy
-
Li Zhong authored
This patch fixes MAX_STACK_TRACE_ENTRIES too low warning for ppc32, which is similar to commit 12660b17. Reported-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds authored
Pull GFS2 fix from Steven Whitehouse. * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: fix skip unlock condition
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fix from Joerg Roedel: "One fix for the AMD IOMMU driver to work around broken BIOSes found in the field. Some BIOSes forget to enable a workaround for a hardware problem which might cause the IOMMU to stop working under high load conditions. The fix makes sure this workaround is enabled." * tag 'iommu-fixes-v3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: IOMMU, AMD Family15h Model10-1Fh erratum 746 Workaround
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
Pull MFD fixes from Samuel Ortiz: "This is the first pull request for MFD fixes for 3.8 We have some build failure fixes (twl4030, vexpress, abx500 and tps65910), some actual runtime oops and lockup fixes (rtsx, da9052), and some more hypothetical NULL pointers dereferences fixes for pcf50633 and max776xx. Then we also have additional rtsx fixes for a correct switch output voltage and clock divider correctness for rtl8411 (rtsx driver), and irqdomain fix for db8550-prcmu, and some more cosmetic fixes for arizona and wm5102." * tag 'mfd-for-linus-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: rtsx: Fix oops when rtsx_pci_sdmmc is not probed mfd: wm5102: Fix definition of WM5102_MAX_REGISTER mfd: twl4030: Don't warn about uninitialized return code mfd: da9052/53 lockup fix mfd: rtsx: Add clock divider hook mmc: rtsx: Call MFD hook to switch output voltage mfd: rtsx: Add output voltage switch hook mfd: Fix compile errors and warnings when !CONFIG_AB8500_BM mfd: vexpress: Export global functions to fix build error mfd: arizona: Check errors from regcache_sync() mfd: tc3589x: Use simple irqdomain mfd: pcf50633: Init pcf->dev before using it mfd: max77693: Init max77693->dev before using it mfd: max77686: Init max77686->dev before using it mfd: db8500-prcmu: Fix irqdomain usage mfd: tps65910: Select REGMAP_IRQ in Kconfig to fix build error mfd: arizona: Disable control interface reporting for WM5102 and WM5110
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking updates from David Miller: "Much more accumulated than I would have liked due to an unexpected bout with a nasty flu: 1) AH and ESP input don't set ECN field correctly because the transport head of the SKB isn't set correctly, fix from Li RongQing. 2) If netfilter conntrack zones are disabled, we can return an uninitialized variable instead of the proper error code. Fix from Borislav Petkov. 3) Fix double SKB free in ath9k driver beacon handling, from Felix Feitkau. 4) Remove bogus assumption about netns cleanup ordering in nf_conntrack, from Pablo Neira Ayuso. 5) Remove a bogus BUG_ON in the new TCP fastopen code, from Eric Dumazet. It uses spin_is_locked() in it's test and is therefore unsuitable for UP. 6) Fix SELINUX labelling regressions added by the tuntap multiqueue changes, from Paul Moore. 7) Fix CRC errors with jumbo frame receive in tg3 driver, from Nithin Nayak Sujir. 8) CXGB4 driver sets interrupt coalescing parameters only on first queue, rather than all of them. Fix from Thadeu Lima de Souza Cascardo. 9) Fix regression in the dispatch of read/write registers in dm9601 driver, from Tushar Behera. 10) ipv6_append_data miscalculates header length, from Romain KUNTZ. 11) Fix PMTU handling regressions on ipv4 routes, from Steffen Klassert, Timo Teräs, and Julian Anastasov. 12) In 3c574_cs driver, add necessary parenthesis to "x << y & z" expression. From Nickolai Zeldovich. 13) macvlan_get_size() causes underallocation netlink message space, fix from Eric Dumazet. 14) Avoid division by zero in xfrm_replay_advance_bmp(), from Nickolai Zeldovich. Amusingly the zero check was already there, we were just performing it after the modulus :-) 15) Some more splice bug fixes from Eric Dumazet, which fix things mostly eminating from how we now more aggressively use high-order pages in SKBs. 16) Fix size calculation bug when freeing hash tables in the IPSEC xfrm code, from Michal Kubecek. 17) Fix PMTU event propagation into socket cached routes, from Steffen Klassert. 18) Fix off by one in TX buffer release in netxen driver, from Eric Dumazet. 19) Fix rediculous memory allocation requirements introduced by the tuntap multiqueue changes, from Jason Wang. 20) Remove bogus AMD platform workaround in r8169 driver that causes major problems in normal operation, from Timo Teräs. 21) virtio-net set affinity and select queue don't handle discontiguous cpu numbers properly, fix from Wanlong Gao. 22) Fix a route refcounting issue in loopback driver, from Eric Dumazet. There's a similar fix coming that we might add to the macvlan driver as well. 23) Fix SKB leaks in batman-adv's distributed arp table code, from Matthias Schiffer. 24) r8169 driver gives descriptor ownership back the hardware before we're done reading the VLAN tag out of it, fix from Francois Romieu. 25) Checksums not calculated properly in GRE tunnel driver fix from Pravin B Shelar. 26) Fix SCTP memory leak on namespace exit." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits) dm9601: support dm9620 variant SCTP: Free the per-net sysctl table on net exit. v2 net: phy: icplus: fix broken INTR pin settings net: phy: icplus: Use the RGMII interface mode to configure clock delays IP_GRE: Fix kernel panic in IP_GRE with GRE csum. sctp: set association state to established in dupcook_a handler ip6mr: limit IPv6 MRT_TABLE identifiers r8169: fix vlan tag read ordering. net: cdc_ncm: use IAD provided by the USB core batman-adv: filter ARP packets with invalid MAC addresses in DAT batman-adv: check for more types of invalid IP addresses in DAT batman-adv: fix skb leak in batadv_dat_snoop_incoming_arp_reply() net: loopback: fix a dst refcounting issue virtio-net: reset virtqueue affinity when doing cpu hotplug virtio-net: split out clean affinity function virtio-net: fix the set affinity bug when CPU IDs are not consecutive can: pch_can: fix invalid error codes can: ti_hecc: fix invalid error codes can: c_can: fix invalid error codes r8169: remove the obsolete and incorrect AMD workaround ...
-
Suravee Suthikulpanit authored
The IOMMU may stop processing page translations due to a perceived lack of credits for writing upstream peripheral page service request (PPR) or event logs. If the L2B miscellaneous clock gating feature is enabled the IOMMU does not properly register credits after the log request has completed, leading to a potential system hang. BIOSes are supposed to disable L2B micellaneous clock gating by setting L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b. This patch corrects that for those which do not enable this workaround. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <joro@8bytes.org>
-
David Teigland authored
The recent commit fb6791d1 included the wrong logic. The lvbptr check was incorrectly added after the patch was tested. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Peter Korsgaard authored
dm9620 is a newer variant of dm9601 with more features (usb 2.0, checksum offload, ..), but it can also be put in a dm9601 compatible mode, allowing us to reuse the existing driver. This does mean that the extended features like checksum offload cannot be used, but that's hardly critical on a 100mbps interface. Thanks to Sławek Wernikowski <slawek@wernikowski.net> for providing me with a dm9620 based device to test. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
Per-net sysctl table needs to be explicitly freed at net exit. Otherwise we see the following with kmemleak: unreferenced object 0xffff880402d08000 (size 2048): comm "chrome_sandbox", pid 18437, jiffies 4310887172 (age 9097.630s) hex dump (first 32 bytes): b2 68 89 81 ff ff ff ff 20 04 04 f8 01 88 ff ff .h...... ....... 04 00 00 00 a4 01 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815b4aad>] kmemleak_alloc+0x21/0x3e [<ffffffff81110352>] slab_post_alloc_hook+0x28/0x2a [<ffffffff81113fad>] __kmalloc_track_caller+0xf1/0x104 [<ffffffff810f10c2>] kmemdup+0x1b/0x30 [<ffffffff81571e9f>] sctp_sysctl_net_register+0x1f/0x72 [<ffffffff8155d305>] sctp_net_init+0x100/0x39f [<ffffffff814ad53c>] ops_init+0xc6/0xf5 [<ffffffff814ad5b7>] setup_net+0x4c/0xd0 [<ffffffff814ada5e>] copy_net_ns+0x6d/0xd6 [<ffffffff810938b1>] create_new_namespaces+0xd7/0x147 [<ffffffff810939f4>] copy_namespaces+0x63/0x99 [<ffffffff81076733>] copy_process+0xa65/0x1233 [<ffffffff81077030>] do_fork+0x10b/0x271 [<ffffffff8100a0e9>] sys_clone+0x23/0x25 [<ffffffff815dda73>] stub_clone+0x13/0x20 [<ffffffffffffffff>] 0xffffffffffffffff I fixed the spelling of sysctl_header so the code actually compiles. -- EWB. Reported-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
This patch fixes the setting of the INTR pin that is valid for IP101 A/G device and not for the IP1001. Reported-by: Anunay Saxena <anunay.saxena@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stuart Menefy authored
Like several other PHY devices which support RGMII, the IC+1001 allows additional delays to by added to the RX_CLK and TX_CLK signals to compensate for skew between the clock and data signals. Previously this was always enabled, but this change makes use of the different RGMII interface modes to allow the user to specify whether this should be enabled. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Due to IP_GRE GSO support, GRE can recieve non linear skb which results in panic in case of GRE_CSUM. Following patch fixes it by using correct csum API. Bug introduced in commit 6b78f16e (gre: add GSO support) Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xufeng Zhang authored
While sctp handling a duplicate COOKIE-ECHO and the action is 'Association restart', sctp_sf_do_dupcook_a() will processing the unexpected COOKIE-ECHO for peer restart, but it does not set the association state to SCTP_STATE_ESTABLISHED, so the association could stuck in SCTP_STATE_SHUTDOWN_PENDING state forever. This violates the sctp specification: RFC 4960 5.2.4. Handle a COOKIE ECHO when a TCB Exists Action A) In this case, the peer may have restarted. ..... After this, the endpoint shall enter the ESTABLISHED state. To resolve this problem, adding a SCTP_CMD_NEW_STATE cmd to the command list before SCTP_CMD_REPLY cmd, this will set the restart association to SCTP_STATE_ESTABLISHED state properly and also avoid I-bit being set in the DATA chunk header when COOKIE_ACK is bundled with DATA chunks. Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We did this for IPv4 in b49d3c1e "net: ipmr: limit MRT_TABLE identifiers" but we need to do it for IPv6 as well. On IPv6 the name is "pim6reg" instead of "pimreg" so there is one less digit allowed. The strcpy() is in ip6mr_reg_vif(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
françois romieu authored
Control of receive descriptor must not be returned to ethernet chipset before vlan tag processing is done. VLAN tag receive word is now reset both in normal and error path. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Spotted-by: Timo Teras <timo.teras@iki.fi> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
commit 9992c2e2 (net: cdc_ncm: workaround for missing CDC Union) added code to lookup an IAD for the interface we are probing. This is redundant. The USB core has already done the lookup and saved the result in the USB interface struct. Use that instead. Cc: Greg Suarez <gsuarez@smithmicro.com> Cc: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes ares: - fix an skb memleak in DAT - fix the ARP filtering routine in DAT by preventing bogus entries to overwrite already existing ones in the local cache. - fix the ARP filtering routine in DAT by preventing it to parse and add to the cache bogus entries Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Jan, 2013 9 commits
-
-
Matthias Schiffer authored
We never want multicast MAC addresses in the Distributed ARP Table, so it's best to completely ignore ARP packets containing them where we expect unicast addresses. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
-
Matthias Schiffer authored
There are more types of IP addresses that may appear in ARP packets that we don't want to process. While some of these should never appear in sane ARP packets, a 0.0.0.0 source is used for duplicate address detection and thus seen quite often. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
-
Matthias Schiffer authored
The callers of batadv_dat_snoop_incoming_arp_reply() assume the skb has been freed when it returns true; fix this by calling kfree_skb before returning as it is done in batadv_dat_snoop_incoming_arp_request(). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== This is a batch of fixes intende for the 3.8 stream. Regarding the iwlwifi bits, Johannes says this: "Please pull to get a single fix from Emmanuel for a bug I introduced due to misunderstanding the code." Regarding the mac80211 bits, Johannes says this: "I have a few small fixes for you: * some mesh frames would cause encryption warnings -- fixes from Bob * scanning would pretty much break an association if we transmitted anything to the AP while scanning -- fix from Stanislaw * mode injection was broken by channel contexts -- fix from Felix * FT roaming was broken: hardware crypto would get disabled by it" Along with that, a handful of other fixes confined to specific drivers. Avinash Patil fixes a typo in a NULL check in mwifiex. Larry Finger fixes a build warning in rtlwifi. Seems safe... Stanislaw Gruszka fixes iwlegacy to prevent microcode errors when switching from IBSS mode to STA mode. Felix Fietkau provides a trio of ath9k fixes related to proper tuning. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Ben Greear reported crashes in ip_rcv_finish() on a stress test involving many macvlans. We tracked the bug to a dst use after free. ip_rcv_finish() was calling dst->input() and got garbage for dst->input value. It appears the bug is in loopback driver, lacking a skb_dst_force() before calling netif_rx(). As a result, a non refcounted dst, normally protected by a RCU read_lock section, was escaping this section and could be freed before the packet being processed. [<ffffffff813a3c4d>] loopback_xmit+0x64/0x83 [<ffffffff81477364>] dev_hard_start_xmit+0x26c/0x35e [<ffffffff8147771a>] dev_queue_xmit+0x2c4/0x37c [<ffffffff81477456>] ? dev_hard_start_xmit+0x35e/0x35e [<ffffffff8148cfa6>] ? eth_header+0x28/0xb6 [<ffffffff81480f09>] neigh_resolve_output+0x176/0x1a7 [<ffffffff814ad835>] ip_finish_output2+0x297/0x30d [<ffffffff814ad6d5>] ? ip_finish_output2+0x137/0x30d [<ffffffff814ad90e>] ip_finish_output+0x63/0x68 [<ffffffff814ae412>] ip_output+0x61/0x67 [<ffffffff814ab904>] dst_output+0x17/0x1b [<ffffffff814adb6d>] ip_local_out+0x1e/0x23 [<ffffffff814ae1c4>] ip_queue_xmit+0x315/0x353 [<ffffffff814adeaf>] ? ip_send_unicast_reply+0x2cc/0x2cc [<ffffffff814c018f>] tcp_transmit_skb+0x7ca/0x80b [<ffffffff814c3571>] tcp_connect+0x53c/0x587 [<ffffffff810c2f0c>] ? getnstimeofday+0x44/0x7d [<ffffffff810c2f56>] ? ktime_get_real+0x11/0x3e [<ffffffff814c6f9b>] tcp_v4_connect+0x3c2/0x431 [<ffffffff814d6913>] __inet_stream_connect+0x84/0x287 [<ffffffff814d6b38>] ? inet_stream_connect+0x22/0x49 [<ffffffff8108d695>] ? _local_bh_enable_ip+0x84/0x9f [<ffffffff8108d6c8>] ? local_bh_enable+0xd/0x11 [<ffffffff8146763c>] ? lock_sock_nested+0x6e/0x79 [<ffffffff814d6b38>] ? inet_stream_connect+0x22/0x49 [<ffffffff814d6b49>] inet_stream_connect+0x33/0x49 [<ffffffff814632c6>] sys_connect+0x75/0x98 This bug was introduced in linux-2.6.35, in commit 7fee226a (net: add a noref bit on skb dst) skb_dst_force() is enforced in dev_queue_xmit() for devices having a qdisc. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wanlong Gao authored
Add a cpu notifier to virtio-net, so that we can reset the virtqueue affinity if the cpu hotplug happens. It improve the performance through enabling or disabling the virtqueue affinity after doing cpu hotplug. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Dumazet <erdnetdev@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wanlong Gao authored
Split out the clean affinity function to virtnet_clean_affinity(). Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Dumazet <erdnetdev@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wanlong Gao authored
As Michael mentioned, set affinity and select queue will not work very well when CPU IDs are not consecutive, this can happen with hot unplug. Fix this bug by traversal the online CPUs, and create a per cpu variable to find the mapping from CPU to the preferable virtual-queue. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Dumazet <erdnetdev@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei WANG authored
If rtsx_pci_sdmmc is not probed, function pointer pcr->slots[].card_event will point to NULL, and thus rtsx_pci_card_detect will reference a NULL pointer. Check card_event pointer before referencing it can avoid kernel panic. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-