- 28 Jun, 2015 21 commits
-
-
Oliver Neukum authored
[ Upstream commit 43faadfe ] The device exists with two device IDs instead of one as previously believed. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Oliver Neukum authored
[ Upstream commit 003e817a ] During a stress test these mice kept dropping and reappearing in runlevel 1 as opposed to 5. Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit b70b8258 ] This mouse is also known under other IDs. It needs the quirk or will disconnect in runlevel 1 or 3. Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 7a8e53c4 ] This mouse needs QUIRK_ALWAYS_POLL. Signed-off-by:
-
oliver@neukum.org authored
[ Upstream commit a4154577 ] This device disconnects every 60s without X Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 2f31c525 ] Logitech devices use a vendor protocol to communicate various information with the device. This protocol is called HID++, and an exerpt can be found here: https://drive.google.com/folderview?id=0BxbRzx7vEV7eWmgwazJ3NUFfQ28&usp=shar The main difficulty which is related to this protocol is that it is a synchronous protocol using the input reports. So when we want to get some information from the device, we need to wait for a matching input report. This driver introduce this capabilities to be able to support the multitouch mode of the Logitech Wireless Touchpad T651 (the bluetooth one). The multitouch data is available directly from the mouse input reports, and we just need to query the device on connect about its caracteristics. HID++ and the touchpad features has a specific reporting mode which uses pure HID++ reports, but Logitech told us not to use it for this specific device. During QA, they detected that some bluetooth input reports where lost, and so the only supported mode is the pointer mode. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by:
Andrew de los Reyes <adlr@chromium.org> Signed-off-by:
-
Jakub Sitnicki authored
[ Upstream commit ef567cf9 ] Microsoft Natural Wireless Ergonomic Keyboard 7000 has special My Favorites 1..5 keys which are handled through a vendor-defined usage page (0xff05). Apply MS_ERGONOMY quirks handling to USB PID 0x071d (Microsoft Microsoft 2.4GHz Transceiver V1.0) so that the My Favorites 1..5 keys are reported as KEY_F14..18 events. Link: https://bugzilla.kernel.org/show_bug.cgi?id=52841Signed-off-by:
Jakub Sitnicki <jsitnicki@gmail.com> Signed-off-by:
-
Darren Salt authored
[ Upstream commit afe98939 ] Signed-off-by:
Darren Salt <devspam@moreofthesa.me.uk> Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 70b69cfb ] Based on a patch from: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> Most of the tablets handled by hid-uclogic already use MULTI_INPUT. For the ones which are not quirked in usbhid/hidquirks, they have a custom report descriptor which contains only one report per HID interface. For those tablets HID_QUIRK_MULTI_INPUT is transparent. According to https://github.com/DIGImend/tablets, the only problematic tablet currently handled by hid-uclogic is the TWHA60 v3. This tablet presents different report descriptors from the ones currently quirked. This is not a problem per se, given that this tablet is not supported currently in this version (it needs the same command as a Huion to start forwarding events). Reviewed-by:
Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by:
-
Milan Plzik authored
[ Upstream commit feb6faf1 ] Genius PenSketch M912 digitizer tablet sends incorrect report descriptor by default. This patch replaces it with a corrected one. Signed-off-by:
Milan Plzik <milan.plzik@gmail.com> Reviewed-by:
-
Baruch Siach authored
[ Upstream commit 838d030b ] The callback function signature has changed in commit a5818a8b (pinctrl: get_group_pins() const fixes) Fixes: a5818a8b ('pinctrl: get_group_pins() const fixes') Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Baruch Siach authored
[ Upstream commit b18104c0 ] This API has changed in commit 6e5e959d (pinctrl: API changes to support multiple states per device). Fixes: 6e5e959d ('pinctrl: API changes to support multiple states per device') Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Baruch Siach authored
[ Upstream commit 260463d4 ] Commit 03e9f0ca (pinctrl: clean up after enable refactoring) updated the documentation to remove mention of disable(), and rename enable() to set_mux(). One in-text mention was forgotten. Fix this. Fixes: 03e9f0ca ('pinctrl: clean up after enable refactoring') Signed-off-by:
-
Simon Horman authored
[ Upstream commit 78420b5d ] Set the SYSCIER as per the values indicated in the documentation. The value previously used appears to been copied from the r8a7779 implementation but on closer inspection is not correct for the r8a7791. Fixes: 5f6108bb ("ARM: shmobile: r8a7791 SYSC setup code") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Simon Horman authored
[ Upstream commit ee72f6ad ] Set the SYSCIER as per the values indicated in the documentation. The value previously used appears to been copied from the r8a7779 implementation but on closer inspection is not correct for the r8a7790. Fixes: a48f1655 ("ARM: shmobile: r8a7790 SYSC setup code") Reported-by:
-
Baruch Siach authored
[ Upstream commit 939417bd ] struct pinctrl_desc does not contain the maxpin member since commit 0d2006bb (pinctrl: remove unnecessary max pin number). Fixes: 0d2006bb ('pinctrl: remove unnecessary max pin number') Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit 91555ce9 ] The writeable bits in the USR2 register are all "write 1 to clear" so only write the bits that actually should be cleared. Fixes: f1f836e4 ("serial: imx: Add Rx Fifo overrun error message") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Jiada Wang authored
[ Upstream commit 6f026d6b ] Other than enable Receiver Overrun Interrupt Enable (UCR4_OREN) in start_tx interface, UCR4_OREN should be enabled before enable of Receiver. Signed-off-by:
Jiada Wang <jiada_wang@mentor.com> Signed-off-by:
-
Max Filippov authored
[ Upstream commit 4949009e ] LCD driver is always built for the XTFPGA platform, but its base address is not configurable, and is wrong for ML605/KC705. Its initialization locks up KC705 board hardware. Make the whole driver optional, and its base address and bus width configurable. Implement 4-bit bus access method. Cc: stable@vger.kernel.org Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Simon Horman authored
[ Upstream commit 2ea0d4ec ] There appears to have been some inconsistency and confusion here as on the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3. Fixes: 59e79895 ("ARM: shmobile: r8a7791: Add clocks") Reported-by:
-
Yoshihiro Shimoda authored
[ Upstream commit b9473d9f ] Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by:
-
- 22 Jun, 2015 1 commit
-
-
Mel Gorman authored
commit 8e76d4ee upstream. Jovi Zhangwei reported the following problem Below kernel vm bug can be triggered by tcpdump which mmaped a lot of pages with GFP_COMP flag. [Mon May 25 05:29:33 2015] page:ffffea0015414000 count:66 mapcount:1 mapping: (null) index:0x0 [Mon May 25 05:29:33 2015] flags: 0x20047580004000(head) [Mon May 25 05:29:33 2015] page dumped because: VM_BUG_ON_PAGE(compound_order(page) && !PageTransHuge(page)) [Mon May 25 05:29:33 2015] ------------[ cut here ]------------ [Mon May 25 05:29:33 2015] kernel BUG at mm/migrate.c:1661! [Mon May 25 05:29:33 2015] invalid opcode: 0000 [#1] SMP In this case it was triggered by running tcpdump but it's not necessary reproducible on all systems. sudo tcpdump -i bond0.100 'tcp port 4242' -c 100000000000 -w 4242.pcap Compound pages cannot be migrated and it was not expected that such pages be marked for NUMA balancing. This did not take into account that drivers such as net/packet/af_packet.c may insert compound pages into userspace with vm_insert_page. This patch tells the NUMA balancing protection scanner to skip all VM_MIXEDMAP mappings which avoids the possibility that compound pages are marked for migration. Signed-off-by:
Mel Gorman <mgorman@suse.de> Reported-by:
Jovi Zhangwei <jovi@cloudflare.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [jovi: Backported to 3.18: adjust context] Signed-off-by:
-
- 15 Jun, 2015 18 commits
-
-
Ilya Dryomov authored
[ Upstream commit 45002267 ] Crush temporary buffers are allocated as per replica size configured by the user. When there are more final osds (to be selected as per rule) than the replicas, buffer overlaps and it causes crash. Now, it ensures that at most num-rep osds are selected even if more number of osds are allowed by the rule. Reflects ceph.git commits 6b4d1aa99718e3b367496326c1e64551330fabc0, 234b066ba04976783d15ff2abc3e81b6cc06fb10. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit c4c832f8 ] br_fdb_update() can be called in process context in the following way: br_fdb_add() -> __br_fdb_add() -> br_fdb_update() (if NTF_USE flag is set) so we need to disable softirqs because there are softirq users of the hash_lock. One easy way to reproduce this is to modify the bridge utility to set NTF_USE, enable stp and then set maxageing to a low value so br_fdb_cleanup() is called frequently and then just add new entries in a loop. This happens because br_fdb_cleanup() is called from timer/softirq context. The spin locks in br_fdb_update were _bh before commit f8ae737d ("[BRIDGE]: forwarding remove unneeded preempt and bh diasables") and at the time that commit was correct because br_fdb_update() couldn't be called from process context, but that changed after commit: 292d1398 ("bridge: add NTF_USE support") Using local_bh_disable/enable around br_fdb_update() allows us to keep using the spin_lock/unlock in br_fdb_update for the fast-path. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 292d1398 ("bridge: add NTF_USE support") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sriharsha Basavapatna authored
[ Upstream commit e51000db ] There are several places in the driver (all in control paths) where coherent dma memory is being allocated using either dma_alloc_coherent() or the deprecated pci_alloc_consistent(). All these calls should be changed to use dma_zalloc_coherent() to avoid uninitialized fields in data structures backed by this memory. Reported-by:
Joerg Roedel <jroedel@suse.de> Tested-by:
Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com> Signed-off-by:
-
Shawn Bohrer authored
[ Upstream commit 6e540309 ] 421b3885 "udp: ipv4: Add udp early demux" introduced a regression that allowed sockets bound to INADDR_ANY to receive packets from multicast groups that the socket had not joined. For example a socket that had joined 224.168.2.9 could also receive packets from 225.168.2.9 despite not having joined that group if ip_early_demux is enabled. Fix this by calling ip_check_mc_rcu() in udp_v4_early_demux() to verify that the multicast packet is indeed ours. Signed-off-by:
Shawn Bohrer <sbohrer@rgmadvisors.com> Reported-by:
Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Signed-off-by:
-
Ian Campbell authored
[ Upstream commit 31a41898 ] When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 9f950415 ] Linux 3.17 and earlier are explicitly engineered so that if the app doesn't specifically request a CC module on a listener before the SYN arrives, then the child gets the system default CC when the connection is established. See tcp_init_congestion_control() in 3.17 or earlier, which says "if no choice made yet assign the current value set as default". The change ("net: tcp: assign tcp cong_ops when tcp sk is created") altered these semantics, so that children got their parent listener's congestion control even if the system default had changed after the listener was created. This commit returns to those original semantics from 3.17 and earlier, since they are the original semantics from 2007 in 4d4d3d1e ("[TCP]: Congestion control initialization."), and some Linux congestion control workflows depend on that. In summary, if a listener socket specifically sets TCP_CONGESTION to "x", or the route locks the CC module to "x", then the child gets "x". Otherwise the child gets current system default from net.ipv4.tcp_congestion_control. That's the behavior in 3.17 and earlier, and this commit restores that. Fixes: 55d8694f ("net: tcp: assign tcp cong_ops when tcp sk is created") Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit beb39db5 ] We have two problems in UDP stack related to bogus checksums : 1) We return -EAGAIN to application even if receive queue is not empty. This breaks applications using edge trigger epoll() 2) Under UDP flood, we can loop forever without yielding to other processes, potentially hanging the host, especially on non SMP. This patch is an attempt to make things better. We might in the future add extra support for rt applications wanting to better control time spent doing a recv() in a hostile environment. For example we could validate checksums before queuing packets in socket receive queue. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 71d9f614 ] br_multicast_query_expired() querier argument is a pointer to a struct bridge_mcast_querier : struct bridge_mcast_querier { struct br_ip addr; struct net_bridge_port __rcu *port; }; Intent of the code was to clear port field, not the pointer to querier. Fixes: 2cd41431 ("bridge: memorize and export selected IGMP/MLD querier port") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by:
Linus Lüssing <linus.luessing@c0d3.blue> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Steinar H. Gunderson <sesse@samfundet.no> Signed-off-by:
-
Jason Gunthorpe authored
[ Upstream commit 9302d7bb ] sctp_v4_map_v6 was subtly writing and reading from members of a union in a way the clobbered data it needed to read before it read it. Zeroing the v6 flowinfo overwrites the v4 sin_addr with 0, meaning that every place that calls sctp_v4_map_v6 gets ::ffff:0.0.0.0 as the result. Reorder things to guarantee correct behaviour no matter what the union layout is. This impacts user space clients that open an IPv6 SCTP socket and receive IPv4 connections. Prior to 299ee user space would see a sockaddr with AF_INET and a correct address, after 299ee the sockaddr is AF_INET6, but the address is wrong. Fixes: 299ee123 (sctp: Fixup v4mapped behaviour to comply with Sock API) Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 86e363dc ] For mq qdisc, we add per tx queue qdisc to root qdisc for display purpose, however, that happens too early, before the new dev->qdisc is finally set, this causes q->list points to an old root qdisc which is going to be freed right before assigning with a new one. Fix this by moving ->attach() after setting dev->qdisc. For the record, this fixes the following crash: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756 ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20 ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000 Call Trace: [<ffffffff81a44e7f>] dump_stack+0x4c/0x65 [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6 [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98 [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48 [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a [<ffffffff814e725b>] __list_del_entry+0x5a/0x98 [<ffffffff814e72a7>] list_del+0xe/0x2d [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20 [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6 [<ffffffff81822676>] qdisc_graft+0x11d/0x243 [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4 [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226 [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17 [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d [<ffffffff818544b2>] netlink_unicast+0xcb/0x150 [<ffffffff81161db9>] ? might_fault+0x59/0xa9 [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37 [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72 [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32 [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76 [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199 [<ffffffff811b14d5>] ? __fget_light+0x50/0x78 [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60 [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f ---[ end trace ef29d3fb28e97ae7 ]--- For long term, we probably need to clean up the qdisc_graft() code in case it hides other bugs like this. Fixes: 95dc1929 ("pkt_sched: give visibility to mq slave qdiscs") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Ross Lagerwall authored
[ Upstream commit ce0e5c52 ] Commit e9ce7cb6 ("xen-netback: Factor queue-specific data into queue struct") introduced a regression when moving queue-specific data into the queue struct by failing to set the credit_bytes field. This prevented bandwidth limiting from working. Initialize the field as it was done before multiqueue support was added. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
-
Mark Salyzyn authored
[ Upstream commit b48732e4 ] got a rare NULL pointer dereference in clear_bit Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by:
-
Richard Cochran authored
[ Upstream commit adbe088f ] A pair of nested spin locks was introduced in commit 63502b8d "dp83640: Fix receive timestamp race condition". Unfortunately the 'flags' parameter was reused for the inner lock, clobbering the originally saved IRQ state. This patch fixes the issue by changing the inner lock to plain spin_lock without irqsave. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Richard Cochran authored
[ Upstream commit a935865c ] Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by:
-
Richard Cochran authored
[ Upstream commit 397a253a ] Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit 47cc84ce ] When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Reported-by:
Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 44f6731d ] The tx_curr_frame_payload field is u32. When we try to calculate a small negative delta based on it, we end up with a positive integer close to 2^32 instead. So the tx_bytes pointer increases by about 2^32 for every transmitted frame. Fix by calculating the delta as a signed long. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by:
Florian Bruhin <me@the-compiler.org> Fixes: 7a1e890e ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 381c759d ] ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da413 ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
-
