- 17 Mar, 2021 9 commits
-
-
Suganath Prabu S authored
According to the MPI specification, PCIe SGL buffers can not cross a 4 GB boundary. While allocating, if any buffer crosses the 4 GB boundary, then: - Release the already allocated memory pools; and - Reallocate them by changing the DMA coherent mask to 32-bit Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@broadcom.comSigned-off-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Gustavo A. R. Silva authored
Dynamic memory allocation isn't actually needed and it can be replaced by statically allocating memory for struct object io_unit_pg3 with 36 hardcoded entries for its GPIOVal array. Also, this helps the with ongoing efforts to enable -Warray-bounds by fixing the following warning: drivers/scsi/mpt3sas/mpt3sas_ctl.c: In function ‘BRM_status_show’: drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:63: warning: array subscript 24 is above array bounds of ‘U16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds] 3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]); ./include/uapi/linux/byteorder/little_endian.h:36:51: note: in definition of macro ‘__le16_to_cpu’ 36 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) | ^ drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:31: note: in expansion of macro ‘le16_to_cpu’ 3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]); Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/202103101058.16ED27BE3@keescook/ Link: https://lore.kernel.org/r/20210310235951.GA108661@embeddedorReviewed-by:Kees Cook <keescook@chromium.org> Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Adrian Hunter authored
Add PCI ID and callbacks to support Intel LKF. This includes the ability to use an ACPI device-specific method (DSM) to perform a UFS device reset. Link: https://lore.kernel.org/r/20210312080620.13311-1-adrian.hunter@intel.comSigned-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Caleb Connolly authored
This check is redundant as all UFS versions are currently supported. Link: https://lore.kernel.org/r/20210310153215.371227-4-caleb@connolly.techReviewed-by:
Bean Huo <beanhuo@micron.com> Co-developed-by:
Nitin Rawat <nitirawa@codeaurora.org> Signed-off-by:
Caleb Connolly <caleb@connolly.tech> Signed-off-by:
-
Caleb Connolly authored
Replace the UFSHCI_VERSION_xy macros. Link: https://lore.kernel.org/r/20210310153215.371227-3-caleb@connolly.techReviewed-by:
-
Caleb Connolly authored
Update the driver to use a function for referencing the UFS version. This replaces the UFSHCI_VERSION_xy macros, and supports comparisons where they did not. Link: https://lore.kernel.org/r/20210310153215.371227-2-caleb@connolly.techSuggested-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Yue Hu authored
The local variable 'ret' is always zero. Remove it and return 0 at the end of the function. Link: https://lore.kernel.org/r/20210310082741.647-1-zbestahu@gmail.comSigned-off-by:
Yue Hu <huyue2@yulong.com> Signed-off-by:
-
Vinod Koul authored
Document "qcom,sm8250-ufshc" and "qcom,sm8350-ufshc" compatible string. Use of "qcom,sm8250-ufshc" is already present upstream, so add misiing documentation. "qcom,sm8350-ufshc" is for UFS HC found in SM8350 SoC. Link: https://lore.kernel.org/r/20210204165234.61939-1-vkoul@kernel.orgReviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Michael Kelley authored
storvsc currently sets .dma_boundary to limit scatterlist entries to 4 Kbytes, which is less efficient with huge pages that offer large chunks of contiguous physical memory. Improve the algorithm for creating the Hyper-V guest physical address PFN array so that scatterlist entries with lengths > 4Kbytes are handled. As a result, remove the .dma_boundary setting. The improved algorithm also adds support for scatterlist entries with offsets >= 4Kbytes, which is supported by many other SCSI low-level drivers. And it retains support for architectures where possibly PAGE_SIZE != HV_HYP_PAGE_SIZE (such as ARM64). Link: https://lore.kernel.org/r/1614120294-1930-1-git-send-email-mikelley@microsoft.comReviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
-
- 16 Mar, 2021 31 commits
-
-
Bodo Stroesser authored
In commit f7c89771 ("scsi: target: tcmu: Replace radix_tree with XArray") the meaning of last parameter of tcmu_blocks_release() was changed. So in the callers we should subtract 1 from the previous parameter. Unfortunately that change got lost at one of the two places where tcmu_blocks_release() is called. That does not lead to any problems, but we should adjust it anyway. Link: https://lore.kernel.org/r/20210310184458.10741-1-bostroesser@gmail.comSigned-off-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
-
Wang Qing authored
Use dma_pool_zalloc() instead of dma_pool_alloc() and memset(). Link: https://lore.kernel.org/r/1615603275-14303-1-git-send-email-wangqing@vivo.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/3w-sas.c: In function ‘twl_scsiop_execute_scsi’: drivers/scsi/3w-sas.c:298:22: warning: variable ‘sglist’ set but not used [-Wunused-but-set-variable] drivers/scsi/3w-sas.c: In function ‘twl_scsi_biosparam’: drivers/scsi/3w-sas.c:1411:23: warning: variable ‘tw_dev’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20210312094738.2207817-31-lee.jones@linaro.org Cc: Adam Radford <aradford@gmail.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/3w-9xxx.c: In function ‘twa_empty_response_queue’: drivers/scsi/3w-9xxx.c:942:24: warning: variable ‘response_que_value’ set but not used [-Wunused-but-set-variable] drivers/scsi/3w-9xxx.c: In function ‘twa_scsi_biosparam’: drivers/scsi/3w-9xxx.c:1701:23: warning: variable ‘tw_dev’ set but not used [-Wunused-but-set-variable] drivers/scsi/3w-9xxx.c: In function ‘twa_scsiop_execute_scsi’: drivers/scsi/3w-9xxx.c:1812:22: warning: variable ‘sglist’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20210312094738.2207817-30-lee.jones@linaro.org Cc: Adam Radford <aradford@gmail.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/3w-xxxx.c: In function ‘tw_empty_response_que’: drivers/scsi/3w-xxxx.c:463:24: warning: variable ‘response_que_value’ set but not used [-Wunused-but-set-variable] drivers/scsi/3w-xxxx.c: In function ‘tw_scsi_biosparam’: drivers/scsi/3w-xxxx.c:1345:23: warning: variable ‘tw_dev’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20210312094738.2207817-29-lee.jones@linaro.org Cc: Adam Radford <aradford@gmail.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Joel Jacobson <linux@3ware.com> Cc: de Melo <acme@conectiva.com.br> Cc: Andre Hedrick <andre@suse.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/myrs.c: In function ‘consistency_check_show’: drivers/scsi/myrs.c:1193:16: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] drivers/scsi/myrs.c: In function ‘myrs_get_resync’: drivers/scsi/myrs.c:1984:5: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20210312094738.2207817-28-lee.jones@linaro.org Cc: Hannes Reinecke <hare@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Linux GmbH <hare@suse.com> Cc: "Leonard N. Zubkoff" <lnz@dandelion.com> Cc: linux-scsi@vger.kernel.org Reviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/atp870u.c:623: warning: expecting prototype for atp870u_queuecommand(). Prototype was for atp870u_queuecommand_lck() instead drivers/scsi/atp870u.c:724: warning: Function parameter or member 'dev' not described in 'send_s870' drivers/scsi/atp870u.c:724: warning: Function parameter or member 'c' not described in 'send_s870' drivers/scsi/atp870u.c:724: warning: Excess function parameter 'host' description in 'send_s870' Link: https://lore.kernel.org/r/20210312094738.2207817-27-lee.jones@linaro.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Marcelo Tosatti <marcelo@conectiva.com.br> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/dc395x.c:980: warning: expecting prototype for dc395x_queue_command(). Prototype was for dc395x_queue_command_lck() instead drivers/scsi/dc395x.c:4263: warning: expecting prototype for adapter_init_host(). Prototype was for adapter_init_scsi_host() instead drivers/scsi/dc395x.c:4353: warning: Function parameter or member 'acb' not described in 'adapter_init' drivers/scsi/dc395x.c:4353: warning: Function parameter or member 'io_port_len' not described in 'adapter_init' drivers/scsi/dc395x.c:4353: warning: expecting prototype for init_adapter(). Prototype was for adapter_init() instead Link: https://lore.kernel.org/r/20210312094738.2207817-26-lee.jones@linaro.org Cc: Oliver Neukum <oliver@neukum.org> Cc: Ali Akcaagac <aliakc@web.de> Cc: Jamie Lenehan <lenehan@twibble.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "C.L. Huang" <ching@tekram.com.tw> Cc: Erich Chen <erich@tekram.com.tw> Cc: Kurt Garloff <garloff@suse.de> Cc: dc395x@twibble.org Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/a100u2w.c: In function ‘inia100_probe_one’: drivers/scsi/a100u2w.c:1092:8: warning: variable ‘bios_phys’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20210312094738.2207817-25-lee.jones@linaro.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: linux-scsi@vger.kernel.org Reviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/initio.c: In function ‘initio_find_busy_scb’: drivers/scsi/initio.c:869:30: warning: variable ‘prev’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20210312094738.2207817-24-lee.jones@linaro.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Bas Vermeulen <bvermeul@blackstar.xs4all.nl> Cc: Christoph Hellwig <hch@lst.de> Cc: Brian Macy <bmacy@sunshinecomputing.com> Cc: linux-scsi@vger.kernel.org Reviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_sysfs.c:118: warning: expecting prototype for bnx2i_get_link_state(). Prototype was for bnx2i_set_ccell_info() instead Link: https://lore.kernel.org/r/20210312094738.2207817-23-lee.jones@linaro.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_mgmt.c:1270: warning: expecting prototype for beiscsi_phys_port(). Prototype was for beiscsi_phys_port_disp() instead Link: https://lore.kernel.org/r/20210312094738.2207817-22-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-drivers@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_main.c:4934: warning: expecting prototype for Boot flag info for iscsi(). Prototype was for BEISCSI_SYSFS_ISCSI_BOOT_FLAGS() instead Link: https://lore.kernel.org/r/20210312094738.2207817-21-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-drivers@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_iscsi.c:312: warning: expecting prototype for beiscsi_set_vlan_tag(). Prototype was for beiscsi_iface_config_vlan() instead Link: https://lore.kernel.org/r/20210312094738.2207817-20-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-drivers@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/esas2r/esas2r_log.c: In function ‘esas2r_log_master’: drivers/scsi/esas2r/esas2r_log.c:155:3: warning: function ‘esas2r_log_master’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] Link: https://lore.kernel.org/r/20210312094738.2207817-19-lee.jones@linaro.org Cc: Bradley Grove <linuxdrivers@attotech.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:1189: warning: expecting prototype for cxgb3i_setup_conn_digest(). Prototype was for ddp_setup_conn_digest() instead Link: https://lore.kernel.org/r/20210312094738.2207817-18-lee.jones@linaro.org Cc: Karen Xie <kxie@chelsio.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Dimitris Michailidis <dm@chelsio.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/ufs/cdns-pltfrm.c:109: warning: expecting prototype for Sets HCLKDIV register value based on the core_clk(). Prototype was for cdns_ufs_set_hclkdiv() instead drivers/scsi/ufs/cdns-pltfrm.c:144: warning: wrong kernel-doc identifier on line: drivers/scsi/ufs/cdns-pltfrm.c:160: warning: wrong kernel-doc identifier on line: drivers/scsi/ufs/cdns-pltfrm.c:176: warning: wrong kernel-doc identifier on line: Link: https://lore.kernel.org/r/20210312094738.2207817-17-lee.jones@linaro.org Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Jan Kotas <jank@cadence.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_nvme.c:2021: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_create_localport' Link: https://lore.kernel.org/r/20210312094738.2207817-16-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/bfa/bfa_fcs_lport.c: In function ‘bfa_fcs_lport_fdmi_build_rhba_pyld’: drivers/scsi/bfa/bfa_fcs_lport.c:2152:1: warning: the frame size of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=] Link: https://lore.kernel.org/r/20210312094738.2207817-15-lee.jones@linaro.org Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_bsg.c:3591: warning: expecting prototype for lpfc_bsg_mbox_ext_cleanup(). Prototype was for lpfc_bsg_mbox_ext_session_reset() instead drivers/scsi/lpfc/lpfc_bsg.c:3885: warning: expecting prototype for lpfc_bsg_sli_cfg_mse_read_cmd_ext(). Prototype was for lpfc_bsg_sli_cfg_read_cmd_ext() instead drivers/scsi/lpfc/lpfc_bsg.c:4371: warning: expecting prototype for lpfc_bsg_mbox_ext_abort_req(). Prototype was for lpfc_bsg_mbox_ext_abort() instead Link: https://lore.kernel.org/r/20210312094738.2207817-14-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_debugfs.c:405: warning: expecting prototype for lpfc_debugfs_common_xri_data(). Prototype was for lpfc_debugfs_commonxripools_data() instead Link: https://lore.kernel.org/r/20210312094738.2207817-13-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla2xxx/qla_target.c:6476: warning: expecting prototype for qla_tgt_lport_register(). Prototype was for qlt_lport_register() instead drivers/scsi/qla2xxx/qla_target.c:6546: warning: expecting prototype for qla_tgt_lport_deregister(). Prototype was for qlt_lport_deregister() instead Link: https://lore.kernel.org/r/20210312094738.2207817-12-lee.jones@linaro.org Cc: Nilesh Javali <njavali@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Vladislav Bolkhovitin <vst@vlnb.net> Cc: Nathaniel Clark <nate@misrule.us> Cc: "Nicholas A. Bellinger" <nab@kernel.org> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla2xxx/qla_nx2.c:2038: warning: expecting prototype for qla4_8xxx_check_temp(). Prototype was for qla8044_check_temp() instead Link: https://lore.kernel.org/r/20210312094738.2207817-11-lee.jones@linaro.org Cc: Nilesh Javali <njavali@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/mpt3sas/mpt3sas_ctl.c:463: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_pre_reset_handler() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:495: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_clear_outstanding_ioctls() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:512: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_reset_done_handler() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:2771: warning: expecting prototype for _ ctl_ioctl_compat(). Prototype was for _ctl_ioctl_compat() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:2789: warning: expecting prototype for _ ctl_mpt2_ioctl_compat(). Prototype was for _ctl_mpt2_ioctl_compat() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:3061: warning: expecting prototype for sas_address_show(). Prototype was for host_sas_address_show() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:3682: warning: expecting prototype for diag_trigger_scsi_show(). Prototype was for diag_trigger_mpi_show() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:3941: warning: expecting prototype for sas_ncq_io_prio_show(). Prototype was for sas_ncq_prio_enable_show() instead Link: https://lore.kernel.org/r/20210312094738.2207817-10-lee.jones@linaro.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@avagotech.com Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla2xxx/qla_mr.c:525: warning: expecting prototype for qlafx00_warm_reset(). Prototype was for qlafx00_soc_cpu_reset() instead drivers/scsi/qla2xxx/qla_mr.c:2869: warning: expecting prototype for qlafx00x_mbx_completion(). Prototype was for qlafx00_mbx_completion() instead Link: https://lore.kernel.org/r/20210312094738.2207817-9-lee.jones@linaro.org Cc: Nilesh Javali <njavali@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/libfc/fc_fcp.c:2255: warning: expecting prototype for fc_fcp_destory(). Prototype was for fc_fcp_destroy() instead Link: https://lore.kernel.org/r/20210312094738.2207817-8-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/mpt3sas/mpt3sas_transport.c:71: warning: Function parameter or member 'phy' not described in '_transport_get_port_id_by_sas_phy' drivers/scsi/mpt3sas/mpt3sas_transport.c:354: warning: Function parameter or member 'port_id' not described in '_transport_expander_report_manufacture' drivers/scsi/mpt3sas/mpt3sas_transport.c:354: warning: expecting prototype for transport_expander_report_manufacture(). Prototype was for _transport_expander_report_manufacture() instead drivers/scsi/mpt3sas/mpt3sas_transport.c:684: warning: Function parameter or member 'hba_port' not described in 'mpt3sas_transport_port_add' drivers/scsi/mpt3sas/mpt3sas_transport.c:684: warning: Excess function parameter 'port' description in 'mpt3sas_transport_port_add' Link: https://lore.kernel.org/r/20210312094738.2207817-7-lee.jones@linaro.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@avagotech.com Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/libfc/fc_rport.c:1500: warning: expecting prototype for fc_rport_els_adisc_resp(). Prototype was for fc_rport_adisc_resp() instead Link: https://lore.kernel.org/r/20210312094738.2207817-6-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_attr.c:880: warning: expecting prototype for lpfc_state_show(). Prototype was for lpfc_link_state_show() instead drivers/scsi/lpfc/lpfc_attr.c:3834: warning: expecting prototype for lpfc_tgt_queue_depth_store(). Prototype was for lpfc_tgt_queue_depth_set() instead drivers/scsi/lpfc/lpfc_attr.c:4027: warning: expecting prototype for lpfc_topology_set(). Prototype was for lpfc_topology_store() instead drivers/scsi/lpfc/lpfc_attr.c:4481: warning: expecting prototype for lpfc_link_speed_set(). Prototype was for lpfc_link_speed_store() instead drivers/scsi/lpfc/lpfc_attr.c:4879: warning: expecting prototype for lpfc_request_firmware_store(). Prototype was for lpfc_request_firmware_upgrade_store() instead drivers/scsi/lpfc/lpfc_attr.c:5235: warning: expecting prototype for lpfc_state_show(). Prototype was for lpfc_fcp_cpu_map_show() instead Link: https://lore.kernel.org/r/20210312094738.2207817-5-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_scsi.c:746: warning: expecting prototype for lpfc_release_scsi_buf(). Prototype was for lpfc_release_scsi_buf_s3() instead drivers/scsi/lpfc/lpfc_scsi.c:979: warning: expecting prototype for App checking is required for(). Prototype was for BG_ERR_CHECK() instead drivers/scsi/lpfc/lpfc_scsi.c:3701: warning: Function parameter or member 'vport' not described in 'lpfc_scsi_prep_cmnd_buf' drivers/scsi/lpfc/lpfc_scsi.c:3701: warning: Excess function parameter 'phba' description in 'lpfc_scsi_prep_cmnd_buf' drivers/scsi/lpfc/lpfc_scsi.c:3717: warning: Function parameter or member 'fcpi_parm' not described in 'lpfc_send_scsi_error_event' drivers/scsi/lpfc/lpfc_scsi.c:3717: warning: Excess function parameter 'rsp_iocb' description in 'lpfc_send_scsi_error_event' drivers/scsi/lpfc/lpfc_scsi.c:3837: warning: Function parameter or member 'fcpi_parm' not described in 'lpfc_handle_fcp_err' drivers/scsi/lpfc/lpfc_scsi.c:3837: warning: expecting prototype for lpfc_handler_fcp_err(). Prototype was for lpfc_handle_fcp_err() instead drivers/scsi/lpfc/lpfc_scsi.c:4021: warning: Function parameter or member 'wcqe' not described in 'lpfc_fcp_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_scsi.c:4021: warning: Excess function parameter 'pwqeOut' description in 'lpfc_fcp_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_scsi.c:4621: warning: Function parameter or member 'vport' not described in 'lpfc_scsi_prep_cmnd_buf_s3' drivers/scsi/lpfc/lpfc_scsi.c:4621: warning: Excess function parameter 'phba' description in 'lpfc_scsi_prep_cmnd_buf_s3' drivers/scsi/lpfc/lpfc_scsi.c:4698: warning: Function parameter or member 'vport' not described in 'lpfc_scsi_prep_cmnd_buf_s4' drivers/scsi/lpfc/lpfc_scsi.c:4698: warning: Excess function parameter 'phba' description in 'lpfc_scsi_prep_cmnd_buf_s4' drivers/scsi/lpfc/lpfc_scsi.c:4954: warning: expecting prototype for lpfc_taskmgmt_def_cmpl(). Prototype was for lpfc_tskmgmt_def_cmpl() instead drivers/scsi/lpfc/lpfc_scsi.c:5094: warning: expecting prototype for lpfc_poll_rearm_time(). Prototype was for lpfc_poll_rearm_timer() instead Link: https://lore.kernel.org/r/20210312094738.2207817-4-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/ufs/ufshcd.c:7142: warning: expecting prototype for ufshcd_calc_icc_level(). Prototype was for ufshcd_find_max_sup_active_icc_level() instead Link: https://lore.kernel.org/r/20210312094738.2207817-3-lee.jones@linaro.org Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Santosh Yaraganavi <santosh.sy@samsung.com> Cc: Vinayak Holikatti <h.vinayak@samsung.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
