- 11 Jul, 2014 40 commits
-
-
Johan Hedberg authored
commit e694788d upstream. The conn->link_key variable tracks the type of link key in use. It is set whenever we respond to a link key request as well as when we get a link key notification event. These two events do not however always guarantee that encryption is enabled: getting a link key request and responding to it may only mean that the remote side has requested authentication but not encryption. On the other hand, the encrypt change event is a certain guarantee that encryption is enabled. The real encryption state is already tracked in the conn->link_mode variable through the HCI_LM_ENCRYPT bit. This patch fixes a check for encryption in the hci_conn_auth function to use the proper conn->link_mode value and thereby eliminates the chance of a false positive result. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Lars-Peter Clausen authored
commit 883a1d49 upstream. The ALSA control code expects that the range of assigned indices to a control is continuous and does not overflow. Currently there are no checks to enforce this. If a control with a overflowing index range is created that control becomes effectively inaccessible and unremovable since snd_ctl_find_id() will not be able to find it. This patch adds a check that makes sure that controls with a overflowing index range can not be created. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Lars-Peter Clausen authored
commit ac902c11 upstream. Each control gets automatically assigned its numids when the control is created. The allocation is done by incrementing the numid by the amount of allocated numids per allocation. This means that excessive creation and destruction of controls (e.g. via SNDRV_CTL_IOCTL_ELEM_ADD/REMOVE) can cause the id to eventually overflow. Currently when this happens for the control that caused the overflow kctl->id.numid + kctl->count will also over flow causing it to be smaller than kctl->id.numid. Most of the code assumes that this is something that can not happen, so we need to make sure that it won't happen Signed-off-by:
-
Lars-Peter Clausen authored
commit fd9f26e4 upstream. A control that is visible on the card->controls list can be freed at any time. This means we must not access any of its memory while not holding the controls_rw_lock. Otherwise we risk a use after free access. Signed-off-by:
-
Lars-Peter Clausen authored
commit 82262a46 upstream. There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by:
-
Lars-Peter Clausen authored
commit 07f4d9d7 upstream. The user-control put and get handlers as well as the tlv do not protect against concurrent access from multiple threads. Since the state of the control is not updated atomically it is possible that either two write operations or a write and a read operation race against each other. Both can lead to arbitrary memory disclosure. This patch introduces a new lock that protects user-controls from concurrent access. Since applications typically access controls sequentially than in parallel a single lock per card should be fine. Signed-off-by:
-
Alan Stern authored
commit b0a50e92 upstream. Leandro Liptak reports that his HASEE E200 computer hangs when we ask the BIOS to hand over control of the EHCI host controller. This definitely sounds like a bug in the BIOS, but at the moment there is no way to fix it. This patch works around the problem by avoiding the handoff whenever the motherboard and BIOS version match those of Leandro's computer. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Leandro Liptak <leandroliptak@gmail.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit 27e35715 upstream. When the rtmutex fast path is enabled the slow unlock function can create the following situation: spin_lock(foo->m->wait_lock); foo->m->owner = NULL; rt_mutex_lock(foo->m); <-- fast path free = atomic_dec_and_test(foo->refcnt); rt_mutex_unlock(foo->m); <-- fast path if (free) kfree(foo); spin_unlock(foo->m->wait_lock); <--- Use after free. Plug the race by changing the slow unlock to the following scheme: while (!rt_mutex_has_waiters(m)) { /* Clear the waiters bit in m->owner */ clear_rt_mutex_waiters(m); owner = rt_mutex_owner(m); spin_unlock(m->wait_lock); if (cmpxchg(m->owner, owner, 0) == owner) return; spin_lock(m->wait_lock); } So in case of a new waiter incoming while the owner tries the slow path unlock we have two situations: unlock(wait_lock); lock(wait_lock); cmpxchg(p, owner, 0) == owner mark_rt_mutex_waiters(lock); acquire(lock); Or: unlock(wait_lock); lock(wait_lock); mark_rt_mutex_waiters(lock); cmpxchg(p, owner, 0) != owner enqueue_waiter(); unlock(wait_lock); lock(wait_lock); wakeup_next waiter(); unlock(wait_lock); lock(wait_lock); acquire(lock); If the fast path is disabled, then the simple m->owner = NULL; unlock(m->wait_lock); is sufficient as all access to m->owner is serialized via m->wait_lock; Also document and clarify the wakeup_next_waiter function as suggested by Oleg Nesterov. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
-
Thomas Gleixner authored
commit 82084984 upstream. When we walk the lock chain, we drop all locks after each step. So the lock chain can change under us before we reacquire the locks. That's harmless in principle as we just follow the wrong lock path. But it can lead to a false positive in the dead lock detection logic: T0 holds L0 T0 blocks on L1 held by T1 T1 blocks on L2 held by T2 T2 blocks on L3 held by T3 T4 blocks on L4 held by T4 Now we walk the chain lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 -> drop locks T2 times out and blocks on L0 Now we continue: lock T2 -> lock L0 -> deadlock detected, but it's not a deadlock at all. Brad tried to work around that in the deadlock detection logic itself, but the more I looked at it the less I liked it, because it's crystal ball magic after the fact. We actually can detect a chain change very simple: lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 -> next_lock = T2->pi_blocked_on->lock; drop locks T2 times out and blocks on L0 Now we continue: lock T2 -> if (next_lock != T2->pi_blocked_on->lock) return; So if we detect that T2 is now blocked on a different lock we stop the chain walk. That's also correct in the following scenario: lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 -> next_lock = T2->pi_blocked_on->lock; drop locks T3 times out and drops L3 T2 acquires L3 and blocks on L4 now Now we continue: lock T2 -> if (next_lock != T2->pi_blocked_on->lock) return; We don't have to follow up the chain at that point, because T2 propagated our priority up to T4 already. [ Folded a cleanup patch from peterz ] Signed-off-by:
Brad Mouring <bmouring@ni.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140605152801.930031935@linutronix.de [bwh: Backported to 3.2: adjust filename, context] Signed-off-by:
-
Thomas Gleixner authored
commit 3d5c9340 upstream. Even in the case when deadlock detection is not requested by the caller, we can detect deadlocks. Right now the code stops the lock chain walk and keeps the waiter enqueued, even on itself. Silly not to yell when such a scenario is detected and to keep the waiter enqueued. Return -EDEADLK unconditionally and handle it at the call sites. The futex calls return -EDEADLK. The non futex ones dequeue the waiter, throw a warning and put the task into a schedule loop. Tagged for stable as it makes the code more robust. Signed-off-by:
-
Andrey Ryabinin authored
commit 624483f3 upstream. While working address sanitizer for kernel I've discovered use-after-free bug in __put_anon_vma. For the last anon_vma, anon_vma->root freed before child anon_vma. Later in anon_vma_free(anon_vma) we are referencing to already freed anon_vma->root to check rwsem. This fixes it by freeing the child anon_vma before freeing anon_vma->root. Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
David Henningsson authored
commit 2041d564 upstream. According to the bug reporter (Данило Шеган), the external mic starts to work and has proper jack detection if only pin 0x19 is marked properly as an external headset mic. AlsaInfo at https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1328587/+attachment/4128991/+files/AlsaInfo.txt BugLink: https://bugs.launchpad.net/bugs/1328587Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Mimi Zohar authored
commit 2fb1c9a4 upstream. Calculating the 'security.evm' HMAC value requires access to the EVM encrypted key. Only the kernel should have access to it. This patch prevents userspace tools(eg. setfattr, cp --preserve=xattr) from setting/modifying the 'security.evm' HMAC value directly. Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Michael Neuling authored
commit 59a53afe upstream. OPAL will mark a CPU that is guarded as "bad" in the status property of the CPU node. Unfortunatley Linux doesn't check this property and will put the bad CPU in the present map. This has caused hangs on booting when we try to unsplit the core. This patch checks the CPU is avaliable via this status property before putting it in the present map. Signed-off-by:
Michael Neuling <mikey@neuling.org> Tested-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Gabor Juhos authored
commit 23afeb61 upstream. On some AR934x based systems, where the frequency of the AHB bus is relatively high, the built-in watchdog causes a spurious restart when it gets enabled. The possible cause of these restarts is that the timeout value written into the TIMER register does not reaches the hardware in time. Add an explicit delay into the ath79_wdt_enable function to avoid the spurious restarts. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Andy Lutomirski authored
commit a3c54931 upstream. Fixes an easy DoS and possible information disclosure. This does nothing about the broken state of x32 auditing. eparis: If the admin has enabled auditd and has specifically loaded audit rules. This bug has been around since before git. Wow... Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
Christian König authored
commit 0986c1a5 upstream. When we set the valid bit on invalid GART entries they are loaded into the TLB when an adjacent entry is loaded. This poisons the TLB with invalid entries which are sometimes not correctly removed on TLB flush. For stable inclusion the patch probably needs to be modified a bit. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> [bwh: Backported to 3.2: R600_PTE_GART is not defined and we list all the flags indvidually] Signed-off-by:
-
Chris Mason authored
commit 7d788742 upstream. We need to NULL the cached_state after freeing it, otherwise we might free it again if find_delalloc_range doesn't find anything. Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
J. Bruce Fields authored
commit 48385408 upstream. 27b11428 ("nfsd4: remove lockowner when removing lock stateid") introduced a memory leak. Reported-by:
Jeff Layton <jeff.layton@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Benjamin Tissoires authored
commit d49cb7ae upstream. commit 421e08c4 fixed the reported min/max for the X and Y axis, but unfortunately, it broke the resolution of those same axis. On the t540p, the resolution is the same regarding X and Y. It is not a problem for xf86-input-synaptics because this driver is only interested in the ratio between X and Y. Unfortunately, xf86-input-cmt uses directly the resolution, and having a null resolution leads to some divide by 0 errors, which are translated by -infinity in the resulting coordinates. Reported-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> [bwh: Backported to 3.2: I didn't apply the PNP ID changes, so the code being moved looks different] Signed-off-by:
-
Hans de Goede authored
commit fb4f8f56 upstream. The touchpad on the GIGABYTE U2442 not only stops communicating when we try to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS versions also when we set bit 1 (enable two finger mode auto correct). I've asked the original reporter of: https://bugzilla.kernel.org/show_bug.cgi?id=61151 To check that not setting bit 1 does not lead to any adverse effects on his model / BIOS revision, and it does not, so this commit fixes the touchpad not working on these versions by simply never setting bit 1 for laptop models with the no_hw_res quirk. Reported-and-tested-by:
James Lademann <jwlademann@gmail.com> Tested-by:
Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit cd9e83e2 upstream. At least the Dell Vostro 5470 elantech *clickpad* reports right button clicks when clicked in the right bottom area: https://bugzilla.redhat.com/show_bug.cgi?id=1103528 This is different from how (elantech) clickpads normally operate, normally no matter where the user clicks on the pad the pad always reports a left button event, since there is only 1 hardware button beneath the path. It looks like Dell has put 2 buttons under the pad, one under each bottom corner, causing this. Since this however still clearly is a real clickpad hardware-wise, we still want to report it as such to userspace, so that things like finger movement in the bottom area can be properly ignored as it should be on clickpads. So deal with this weirdness by simply mapping a right click to a left click on elantech clickpads. As an added advantage this is something which we can simply do on all elantech clickpads, so no need to add special quirks for this weird model. Reported-and-tested-by:
Elder Marco <eldermarco@gmail.com> Signed-off-by:
-
Lai Jiangshan authored
commit 3afb69cb upstream. idr_replace() open-codes the logic to calculate the maximum valid ID given the height of the idr tree; unfortunately, the open-coded logic doesn't account for the fact that the top layer may have unused slots and over-shifts the limit to zero when the tree is at its maximum height. The following test code shows it fails to replace the value for id=((1<<27)+42): static void test5(void) { int id; DEFINE_IDR(test_idr); #define TEST5_START ((1<<27)+42) /* use the highest layer */ printk(KERN_INFO "Start test5\n"); id = idr_alloc(&test_idr, (void *)1, TEST5_START, 0, GFP_KERNEL); BUG_ON(id != TEST5_START); TEST_BUG_ON(idr_replace(&test_idr, (void *)2, TEST5_START) != (void *)1); idr_destroy(&test_idr); printk(KERN_INFO "End of test5\n"); } Fix the bug by using idr_max() which correctly takes into account the maximum allowed shift. sub_alloc() shares the same problem and may incorrectly fail with -EAGAIN; however, this bug doesn't affect correct operation because idr_get_empty_slot(), which already uses idr_max(), retries with the increased @id in such cases. [tj@kernel.org: Updated patch description.] Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Matthew Dempsky authored
commit 4e52365f upstream. When tracing a process in another pid namespace, it's important for fork event messages to contain the child's pid as seen from the tracer's pid namespace, not the parent's. Otherwise, the tracer won't be able to correlate the fork event with later SIGTRAP signals it receives from the child. We still risk a race condition if a ptracer from a different pid namespace attaches after we compute the pid_t value. However, sending a bogus fork event message in this unlikely scenario is still a vast improvement over the status quo where we always send bogus fork event messages to debuggers in a different pid namespace than the forking process. Signed-off-by:
Matthew Dempsky <mdempsky@chromium.org> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Julien Tinnes <jln@chromium.org> Cc: Roland McGrath <mcgrathr@chromium.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by:
-
Boris BREZILLON authored
commit 2fe121e1 upstream. The rtc user must wait at least 1 sec between each time/calandar update (see atmel's datasheet chapter "Updating Time/Calendar"). Use the 1Hz interrupt to update the at91_rtc_upd_rdy flag and wait for the at91_rtc_wait_upd_rdy event if the rtc is not ready. This patch fixes a deadlock in an uninterruptible wait when the RTC is updated more than once every second. AFAICT the bug is here from the beginning, but I think we should at least backport this fix to 3.10 and the following longterm and stable releases. Signed-off-by:
Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by:
Bryan Evenson <bevenson@melinkcorp.com> Tested-by:
-
Johannes Weiner authored
commit 71abdc15 upstream. When kswapd exits, it can end up taking locks that were previously held by allocating tasks while they waited for reclaim. Lockdep currently warns about this: On Wed, May 28, 2014 at 06:06:34PM +0800, Gu Zheng wrote: > inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-R} usage. > kswapd2/1151 [HC0[0]:SC0[0]:HE1:SE1] takes: > (&sig->group_rwsem){+++++?}, at: exit_signals+0x24/0x130 > {RECLAIM_FS-ON-W} state was registered at: > mark_held_locks+0xb9/0x140 > lockdep_trace_alloc+0x7a/0xe0 > kmem_cache_alloc_trace+0x37/0x240 > flex_array_alloc+0x99/0x1a0 > cgroup_attach_task+0x63/0x430 > attach_task_by_pid+0x210/0x280 > cgroup_procs_write+0x16/0x20 > cgroup_file_write+0x120/0x2c0 > vfs_write+0xc0/0x1f0 > SyS_write+0x4c/0xa0 > tracesys+0xdd/0xe2 > irq event stamp: 49 > hardirqs last enabled at (49): _raw_spin_unlock_irqrestore+0x36/0x70 > hardirqs last disabled at (48): _raw_spin_lock_irqsave+0x2b/0xa0 > softirqs last enabled at (0): copy_process.part.24+0x627/0x15f0 > softirqs last disabled at (0): (null) > > other info that might help us debug this: > Possible unsafe locking scenario: > > CPU0 > ---- > lock(&sig->group_rwsem); > <Interrupt> > lock(&sig->group_rwsem); > > *** DEADLOCK *** > > no locks held by kswapd2/1151. > > stack backtrace: > CPU: 30 PID: 1151 Comm: kswapd2 Not tainted 3.10.39+ #4 > Call Trace: > dump_stack+0x19/0x1b > print_usage_bug+0x1f7/0x208 > mark_lock+0x21d/0x2a0 > __lock_acquire+0x52a/0xb60 > lock_acquire+0xa2/0x140 > down_read+0x51/0xa0 > exit_signals+0x24/0x130 > do_exit+0xb5/0xa50 > kthread+0xdb/0x100 > ret_from_fork+0x7c/0xb0 This is because the kswapd thread is still marked as a reclaimer at the time of exit. But because it is exiting, nobody is actually waiting on it to make reclaim progress anymore, and it's nothing but a regular thread at this point. Be tidy and strip it of all its powers (PF_MEMALLOC, PF_SWAPWRITE, PF_KSWAPD, and the lockdep reclaim state) before returning from the thread function. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reported-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 1d2b60a5 upstream. This patch adds an explicit check in chap_server_compute_md5() to ensure the CHAP_C value received from the initiator during mutual authentication does not match the original CHAP_C provided by the target. This is in line with RFC-3720, section 8.2.1: Originators MUST NOT reuse the CHAP challenge sent by the Responder for the other direction of a bidirectional authentication. Responders MUST check for this condition and close the iSCSI TCP connection if it occurs. Reported-by:
Tejas Vaykole <tejas.vaykole@calsoftinc.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Kailang Yang authored
commit b6c5fbad upstream. New codec support for ALC891. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit c4cad90f upstream. We had a mix & match of flags used when creating legacy ports depending on where we found them in the device-tree. Among others we were missing UPF_SKIP_TEST for some kind of ISA ports which is a problem as quite a few UARTs out there don't support the loopback test (such as a lot of BMCs). Let's pick the set of flags used by the SoC code and generalize it which means autoconf, no loopback test, irq maybe shared and fixed port. Sending to stable as the lack of UPF_SKIP_TEST is breaking serial on some machines so I want this back into distros Signed-off-by:
-
Hugh Dickins authored
commit 7f39dda9 upstream. Trinity reports BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:47 in_atomic(): 0, irqs_disabled(): 0, pid: 5787, name: trinity-c27 __might_sleep < down_write < __put_anon_vma < page_get_anon_vma < migrate_pages < compact_zone < compact_zone_order < try_to_compact_pages .. Right, since conversion to mutex then rwsem, we should not put_anon_vma() from inside an rcu_read_lock()ed section: fix the two places that did so. And add might_sleep() to anon_vma_free(), as suggested by Peter Zijlstra. Fixes: 88c22088 ("mm: optimize page_lock_anon_vma() fast-path") Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Benny Halevy authored
commit 931ee56c upstream. This fixes a bug in the handling of the fi_delegations list. nfs4_setlease does not hold the recall_lock when adding to it. The client_mutex is held, which prevents against concurrent list changes, but nfsd_break_deleg_cb does not hold while walking it. New delegations could theoretically creep onto the list while we're walking it there. Signed-off-by:
Benny Halevy <bhalevy@primarydata.com> Signed-off-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
-
Jérôme Carretero authored
commit d2518365 upstream. This device normally comes with a proprietary driver, using a web GUI to configure RAID: http://www.highpoint-tech.com/USA_new/series_rr600-download.htm But thankfully it also works out of the box with the AHCI driver, being just a Marvell 88SE9235. Devices 640L, 644L, 644LS should also be supported but not tested here. Signed-off-by:
Jérôme Carretero <cJ-ko@zougloub.eu> Signed-off-by:
-
Alex Deucher authored
commit 7d5ab300 upstream. May fix display issues with non-HDMI displays. Signed-off-by:
-
Alex Deucher authored
commit 64252835 upstream. We need to specify the encoder mode as LVDS for eDP when using the Crtc_Source atom table in order to properly set up the FMT hardware. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73911Signed-off-by:
-
Alex Deucher authored
commit af5d3653 upstream. We were checking the ext clock rather than the display clock. Noticed by ArtForz on IRC. Signed-off-by:
-
hujianyang authored
commit 72abc8f4 upstream. I hit the same assert failed as Dolev Raviv reported in Kernel v3.10 shows like this: [ 9641.164028] UBIFS assert failed in shrink_tnc at 131 (pid 13297) [ 9641.234078] CPU: 1 PID: 13297 Comm: mmap.test Tainted: G O 3.10.40 #1 [ 9641.234116] [<c0011a6c>] (unwind_backtrace+0x0/0x12c) from [<c000d0b0>] (show_stack+0x20/0x24) [ 9641.234137] [<c000d0b0>] (show_stack+0x20/0x24) from [<c0311134>] (dump_stack+0x20/0x28) [ 9641.234188] [<c0311134>] (dump_stack+0x20/0x28) from [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs]) [ 9641.234265] [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs]) from [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs]) [ 9641.234307] [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs]) from [<c00cdad8>] (shrink_slab+0x1d4/0x2f8) [ 9641.234327] [<c00cdad8>] (shrink_slab+0x1d4/0x2f8) from [<c00d03d0>] (do_try_to_free_pages+0x300/0x544) [ 9641.234344] [<c00d03d0>] (do_try_to_free_pages+0x300/0x544) from [<c00d0a44>] (try_to_free_pages+0x2d0/0x398) [ 9641.234363] [<c00d0a44>] (try_to_free_pages+0x2d0/0x398) from [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8) [ 9641.234382] [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8) from [<c00f62d8>] (new_slab+0x78/0x238) [ 9641.234400] [<c00f62d8>] (new_slab+0x78/0x238) from [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c) [ 9641.234419] [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c) from [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188) [ 9641.234459] [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188) from [<bf227908>] (do_readpage+0x168/0x468 [ubifs]) [ 9641.234553] [<bf227908>] (do_readpage+0x168/0x468 [ubifs]) from [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs]) [ 9641.234606] [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs]) from [<c00c17c0>] (filemap_fault+0x304/0x418) [ 9641.234638] [<c00c17c0>] (filemap_fault+0x304/0x418) from [<c00de694>] (__do_fault+0xd4/0x530) [ 9641.234665] [<c00de694>] (__do_fault+0xd4/0x530) from [<c00e10c0>] (handle_pte_fault+0x480/0xf54) [ 9641.234690] [<c00e10c0>] (handle_pte_fault+0x480/0xf54) from [<c00e2bf8>] (handle_mm_fault+0x140/0x184) [ 9641.234716] [<c00e2bf8>] (handle_mm_fault+0x140/0x184) from [<c0316688>] (do_page_fault+0x150/0x3ac) [ 9641.234737] [<c0316688>] (do_page_fault+0x150/0x3ac) from [<c000842c>] (do_DataAbort+0x3c/0xa0) [ 9641.234759] [<c000842c>] (do_DataAbort+0x3c/0xa0) from [<c0314e38>] (__dabt_usr+0x38/0x40) After analyzing the code, I found a condition that may cause this failed in correct operations. Thus, I think this assertion is wrong and should be removed. Suppose there are two clean znodes and one dirty znode in TNC. So the per-filesystem atomic_t @clean_zn_cnt is (2). If commit start, dirty_znode is set to COW_ZNODE in get_znodes_to_commit() in case of potentially ops on this znode. We clear COW bit and DIRTY bit in write_index() without @tnc_mutex locked. We don't increase @clean_zn_cnt in this place. As the comments in write_index() shows, if another process hold @tnc_mutex and dirty this znode after we clean it, @clean_zn_cnt would be decreased to (1). We will increase @clean_zn_cnt to (2) with @tnc_mutex locked in free_obsolete_znodes() to keep it right. If shrink_tnc() performs between decrease and increase, it will release other 2 clean znodes it holds and found @clean_zn_cnt is less than zero (1 - 2 = -1), then hit the assertion. Because free_obsolete_znodes() will soon correct @clean_zn_cnt and no harm to fs in this case, I think this assertion could be removed. 2 clean zondes and 1 dirty znode, @clean_zn_cnt == 2 Thread A (commit) Thread B (write or others) Thread C (shrinker) ->write_index ->clear_bit(DIRTY_NODE) ->clear_bit(COW_ZNODE) @clean_zn_cnt == 2 ->mutex_locked(&tnc_mutex) ->dirty_cow_znode ->!ubifs_zn_cow(znode) ->!test_and_set_bit(DIRTY_NODE) ->atomic_dec(&clean_zn_cnt) ->mutex_unlocked(&tnc_mutex) @clean_zn_cnt == 1 ->mutex_locked(&tnc_mutex) ->shrink_tnc ->destroy_tnc_subtree ->atomic_sub(&clean_zn_cnt, 2) ->ubifs_assert <- hit ->mutex_unlocked(&tnc_mutex) @clean_zn_cnt == -1 ->mutex_lock(&tnc_mutex) ->free_obsolete_znodes ->atomic_inc(&clean_zn_cnt) ->mutux_unlock(&tnc_mutex) @clean_zn_cnt == 0 (correct after shrink) Signed-off-by:
hujianyang <hujianyang@huawei.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Christoph Hellwig authored
commit 12337901 upstream. Note nobody's ever noticed because the typical client probably never requests FILES_AVAIL without also requesting something else on the list. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Yann Droneaud authored
commit b6f04d3d upstream. The i386 ABI disagrees with most other ABIs regarding alignment of data types larger than 4 bytes: on most ABIs a padding must be added at end of the structures, while it is not required on i386. So for most ABI struct c4iw_create_cq_resp gets implicitly padded to be aligned on a 8 bytes multiple, while for i386, such padding is not added. The tool pahole can be used to find such implicit padding: $ pahole --anon_include \ --nested_anon_include \ --recursive \ --class_name c4iw_create_cq_resp \ drivers/infiniband/hw/cxgb4/iw_cxgb4.o Then, structure layout can be compared between i386 and x86_64: # +++ obj-i386/drivers/infiniband/hw/cxgb4/iw_cxgb4.o.pahole.txt 2014-03-28 11:43:05.547432195 +0100 # --- obj-x86_64/drivers/infiniband/hw/cxgb4/iw_cxgb4.o.pahole.txt 2014-03-28 10:55:10.990133017 +0100 @@ -14,9 +13,8 @@ struct c4iw_create_cq_resp { __u32 size; /* 28 4 */ __u32 qid_mask; /* 32 4 */ - /* size: 36, cachelines: 1, members: 6 */ - /* last cacheline: 36 bytes */ + /* size: 40, cachelines: 1, members: 6 */ + /* padding: 4 */ + /* last cacheline: 40 bytes */ }; This ABI disagreement will make an x86_64 kernel try to write past the buffer provided by an i386 binary. When boundary check will be implemented, the x86_64 kernel will refuse to write past the i386 userspace provided buffer and the uverbs will fail. If the structure is on a page boundary and the next page is not mapped, ib_copy_to_udata() will fail and the uverb will fail. This patch adds an explicit padding at end of structure c4iw_create_cq_resp, and, like 92b0ca7c ("IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext()"), makes function c4iw_create_cq() not writting this padding field to userspace. This way, x86_64 kernel will be able to write struct c4iw_create_cq_resp as expected by unpatched and patched i386 libcxgb4. Link: http://marc.info/?i=cover.1399309513.git.ydroneaud@opteya.com Fixes: cfdda9d7 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC") Fixes: e24a72a3 ("RDMA/cxgb4: Fix four byte info leak in c4iw_create_cq()") Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Yann Droneaud <ydroneaud@opteya.com> Acked-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Dan Carpenter authored
commit e24a72a3 upstream. There is a four byte hole at the end of the "uresp" struct after the ->qid_mask member. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Bart Van Assche authored
commit 8ec0a0e6 upstream. Avoid leaking a kref count in ib_umad_open() if port->ib_dev == NULL or if nonseekable_open() fails. Avoid leaking a kref count, that sm_sem is kept down and also that the IB_PORT_SM capability mask is not cleared in ib_umad_sm_open() if nonseekable_open() fails. Since container_of() never returns NULL, remove the code that tests whether container_of() returns NULL. Moving the kref_get() call from the start of ib_umad_*open() to the end is safe since it is the responsibility of the caller of these functions to ensure that the cdev pointer remains valid until at least when these functions return. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> [ydroneaud@opteya.com: rework a bit to reduce the amount of code changed] Signed-off-by:
-
