- 21 Sep, 2016 1 commit
-
-
Yazen Ghannam authored
Reinstate driver autoloading now that PCI dependency is gone. Signed-off-by:
Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1473984445-1726-2-git-send-email-Yazen.Ghannam@amd.comSigned-off-by:
Borislav Petkov <bp@suse.de>
-
- 12 Sep, 2016 2 commits
-
-
Colin Ian King authored
pvt->pci_tad is a NUM_CHANNELS array of struct pci_dev pointers and hence cannot be NULL, so the NULL pointer check on pci_tad is redundant. Remove it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160908083801.14766-1-colin.king@canonical.comSigned-off-by:
-
Michael Ellerman authored
We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it from powerpc-only drivers. The pdata structs are kzalloc'ed, so we don't need to initialise those to 0, we can just drop the assignments entirely. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Johannes Thumshirn <morbidrsa@gmail.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/1473674436-19467-1-git-send-email-mpe@ellerman.id.auSigned-off-by:
-
- 09 Sep, 2016 3 commits
-
-
Wei Yongjun authored
Return negative error code from the edac_mc_add_mc() error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
York Sun <york.sun@nxp.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1473350284-26482-1-git-send-email-weiyj.lk@gmail.comSigned-off-by:
-
Borislav Petkov authored
Add York as the maintainer so that get_maintainers.pl can find him on patches. Signed-off-by:
-
Borislav Petkov authored
Doug hasn't been active as a maintainer for a long time now. Move him to CREDITS. Thanks for all the hard work, Doug! Signed-off-by:
-
- 01 Sep, 2016 12 commits
-
-
Borislav Petkov authored
Apparently there's no hw left at Intel for testing patches and Jason is not going to maintain it anymore. Signed-off-by: -
York Sun authored
Replace obsolete simple_strtoul() with kstrtoul(). Signed-off-by:
-
York Sun authored
Add DDR EDAC driver for ARM-based compatible controllers. Both big-endian and little-endian are supported, as specified in device tree. Signed-off-by:
-
York Sun authored
When compiled as a module, removing it causes kernel warnings when irq_dispose_mapping() is called. Instead of calling irq_of_parse_and_map(), use platform_get_irq() to acquire the IRQ number. Signed-off-by:
-
York Sun authored
Get endianness from device tree. Both big endian and little endian are supported. Default to big endian for backwards compatibility to MPC85xx. Signed-off-by:
Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: morbidrsa@gmail.com Cc: oss@buserror.net Cc: stuart.yoder@nxp.com Link: http://lkml.kernel.org/r/1470779760-16483-7-git-send-email-york.sun@nxp.comSigned-off-by:
-
York Sun authored
The compatible DDR controllers may support DDR, DDR2, DDR3, DDR4 DRAM. An individual controller doesn't support all of them. The EDAC driver reads SDRAM_CFG to determine which mode is configured. Add DDR4 and drop the defines used only in the mtype assignment. Signed-off-by:
-
York Sun authored
Use FSL-specific prefix for macros, variables and functions. Signed-off-by:
-
York Sun authored
The mpc85xx-compatible DDR controllers are used on ARM-based SoCs too. Carve out the DDR part from the mpc85xx EDAC driver in preparation to support both architectures. Signed-off-by:
-
York Sun authored
Replace printk() with pr_err/pr_warn/pr_info macros. Signed-off-by:
-
York Sun authored
On e500v1, read fault exception enable (RFXE) controls whether assertion of core_fault_in causes a machine check interrupt. Assertion of core_fault_in can result from uncorrectable data error, such as an L2 multi-bit ECC error. It can also occur from a system error if logic on the integrated device signals a fault for nonfatal errors. RFXE bit is cleared out of reset, and should be left clear for normal operation. Assertion of core_fault_in does not cause a machine check. RFXE is set specifically for RIO (Rapid IO) and PCI for book E to catch the errors by machine check. With this bit set, the EDAC driver can't get the interrupt in case of uncorrectable error. So this bit is cleared in favor of EDAC. However, the benefit of catching such uncorrectable error doesn't outweigh the other errors which may hang the system. Besides, e500v2 has different errors masked by RFXE, and e500mc doesn't support this bit. It is more reasonable to leave RFXE as is in the EDAC driver, and leave the uncorrectable errors triggering machine check for e500v1. Suggested-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Thor Thayer authored
Rename the Memory Controller debug trigger to the same common name as the EDAC devices. Signed-off-by:
Thor Thayer <tthayer@opensource.altera.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1471622666-15197-3-git-send-email-tthayer@opensource.altera.comSigned-off-by:
-
Thor Thayer authored
The L2 and OCRAM devices have different ecc trigger names than the other EDAC devices (FIFO peripherals). Make them all the same and remove the character array from the device structure. Signed-off-by:
-
- 18 Aug, 2016 1 commit
-
-
Tillmann Heidsieck authored
According to the reference manual of MPC8572 and T4240, bit 31 of PEX_ERR_CAP_STAT is W1C (write 1 to clear). Add the corresponding write to PEX_ERR_CAP_STAT in order to fix the PCIe error capture. Tested on a T4240 processor. Signed-off-by:
Tillmann Heidsieck <theidsieck@leenox.de> Acked-by:
Johannes Thumshirn <jthumshirn@suse.de> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160815190849.29327-1-theidsieck@leenox.deSigned-off-by:
-
- 15 Aug, 2016 1 commit
-
-
Bhaktipriya Shridhar authored
Replace the deprecated create_singlethread_workqueue() with alloc_ordered_workqueue() with WQ_MEM_RECLAIM. This is the identity conversion. It's not recommended to stall it from memory pressure. Hence, WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by:
Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160813164124.GA9077@KaryakshetraSigned-off-by:
-
- 10 Aug, 2016 3 commits
-
-
Wei Yongjun authored
Fix the following sparse warning: drivers/edac/altera_edac.c:1649:23: warning: symbol 'a10_eccmgr_ic_ops' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by:
-
Thor Thayer authored
Add the device tree entries needed to support the Altera SD/MMC FIFO buffer EDAC on the Arria10 chip. Signed-off-by:
Dinh Nguyen <dinguyen@opensource.altera.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1470753653-23465-4-git-send-email-tthayer@opensource.altera.comSigned-off-by:
-
Thor Thayer authored
Add Altera Arria10 SD-MMC FIFO memory EDAC support. The SD-MMC is a dual port RAM implementation which is different than any of the other peripherals and therefore requires additional code. Signed-off-by:
-
- 08 Aug, 2016 13 commits
-
-
Thor Thayer authored
Add the device tree bindings needed to support the Altera SD-MMC FIFO buffers EDAC on the Arria10 chip. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1470153381-20517-2-git-send-email-tthayer@opensource.altera.comSigned-off-by:
-
Yazen Ghannam authored
Fam15hMod60h systems are using the channel decode of Fam15hMod30h which gives incorrect results. Fam15hMod60h systems should use the generic channel decode method plus a couple more cases. Signed-off-by:
-
Thor Thayer authored
Add the device tree entries needed to support the Altera USB FIFO buffer EDAC on the Arria10 chip. Signed-off-by:
-
Thor Thayer authored
Add the device tree entries needed to support the Altera DMA FIFO buffer EDAC on the Arria10 chip. Signed-off-by:
-
Thor Thayer authored
Add Altera Arria10 QSPI FIFO memory support. Signed-off-by:
-
Thor Thayer authored
Add Altera Arria10 USB FIFO memory support. Signed-off-by:
-
Thor Thayer authored
Add Altera Arria10 DMA FIFO memory support. Signed-off-by:
-
Thor Thayer authored
Add Altera Arria10 NAND FIFO memory support. Signed-off-by:
-
Thor Thayer authored
Add the device tree bindings needed to support the Altera QSPI FIFO buffer on the Arria10 chip. Signed-off-by:
-
Thor Thayer authored
Add the device tree bindings needed to support the Altera USB FIFO buffer on the Arria10 chip. Signed-off-by:
-
Thor Thayer authored
Add the device tree bindings needed to support the Altera DMA FIFO buffer on the Arria10 chip. Signed-off-by:
-
Thor Thayer authored
Add the device tree bindings needed to support the Altera NAND FIFO buffers on the Arria10 chip. Signed-off-by:
-
Linus Torvalds authored
-
- 07 Aug, 2016 4 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
-
Jens Axboe authored
Since commit 63a4cc24, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
The original commit missed this function, it needs to mark it a write flush. Cc: Mike Christie <mchristi@redhat.com> Fixes: e742fc32 ("target: use bio op accessors") Signed-off-by:
-
