The sparse complaints around the static_asserts were obscuring
more useful complaints.  So, don't check the static_asserts,
and fix the remaining sparse complaints.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

chtls_pt_recvmsg() receives a skb with tls header and subsequent
skb with data, need to finalize the data copy whenever next skb
with tls header is available. but here current tls header is
overwritten by next available tls header, ends up corrupting
user buffer data. fixing it by finalizing current record whenever
next skb contains tls header.

v1->v2:
- Improved commit message.

Fixes: 17a7d24a ("crypto: chtls - generic handling of data and hdr")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Link: https://lore.kernel.org/r/20201022190556.21308-1-vinay.yadav@chelsio.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IPA transactions describe actions to be performed by the IPA
hardware.  Three cases use IPA transactions:  transmitting a socket
buffer; providing a page to receive packet data; and issuing an IPA
immediate command.  An IPA transaction contains a scatter/gather
list (SGL) to hold the set of actions to be performed.

We map buffers in the SGL for DMA at the time they are added to the
transaction.  For skb TX transactions, we fill the SGL with a call
to skb_to_sgvec().  Page RX transactions involve a single page
pointer, and that is recorded in the SGL with sg_set_page().  In
both of these cases we then map the SGL for DMA with a call to
dma_map_sg().

Immediate commands are different.  The payload for an immediate
command comes from a region of coherent DMA memory, which must
*not* be mapped for DMA.  For that reason, gsi_trans_cmd_add()
sort of hand-crafts each SGL entry added to a command transaction.

This patch fixes a problem with the code that crafts the SGL entry
for an immediate command.  Previously a portion of the SGL entry was
updated using sg_set_buf().  However this is not valid because it
includes a call to virt_to_page() on the buffer, but the command
buffer pointer is not a linear address.

Since we never actually map the SGL for command transactions, there
are very few fields in the SGL we need to fill.  Specifically, we
only need to record the DMA address and the length, so they can be
used by __gsi_trans_commit() to fill a TRE.  We additionally need to
preserve the SGL flags so for_each_sg() still works.  For that we
can simply assign a null page pointer for command SGL entries.

Fixes: 9dd441e4 ("soc: qcom: ipa: GSI transactions")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201022010029.11877-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Cross-tree/merge window issues:

   - rtl8150: don't incorrectly assign random MAC addresses; fix late in
     the 5.9 cycle started depending on a return code from a function
     which changed with the 5.10 PR from the usb subsystem

  Current release regressions:

   - Revert "virtio-net: ethtool configurable RXCSUM", it was causing
     crashes at probe when control vq was not negotiated/available

  Previous release regressions:

   - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
     bus, only first device would be probed correctly

   - nexthop: Fix performance regression in nexthop deletion by
     effectively switching from recently added synchronize_rcu() to
     synchronize_rcu_expedited()

   - netsec: ignore 'phy-mode' device property on ACPI systems; the
     property is not populated correctly by the firmware, but firmware
     configures the PHY so just keep boot settings

  Previous releases - always broken:

   - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
     bulk transfers getting "stuck"

   - icmp: randomize the global rate limiter to prevent attackers from
     getting useful signal

   - r8169: fix operation under forced interrupt threading, make the
     driver always use hard irqs, even on RT, given the handler is light
     and only wants to schedule napi (and do so through a _irqoff()
     variant, preferably)

   - bpf: Enforce pointer id generation for all may-be-null register
     type to avoid pointers erroneously getting marked as null-checked

   - tipc: re-configure queue limit for broadcast link

   - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
     tunnels

   - fix various issues in chelsio inline tls driver

  Misc:

   - bpf: improve just-added bpf_redirect_neigh() helper api to support
     supplying nexthop by the caller - in case BPF program has already
     done a lookup we can avoid doing another one

   - remove unnecessary break statements

   - make MCTCP not select IPV6, but rather depend on it"

* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  tcp: fix to update snd_wl1 in bulk receiver fast path
  net: Properly typecast int values to set sk_max_pacing_rate
  netfilter: nf_fwd_netdev: clear timestamp in forwarding path
  ibmvnic: save changed mac address to adapter->mac_addr
  selftests: mptcp: depends on built-in IPv6
  Revert "virtio-net: ethtool configurable RXCSUM"
  rtnetlink: fix data overflow in rtnl_calcit()
  net: ethernet: mtk-star-emac: select REGMAP_MMIO
  net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
  net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
  bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
  bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
  bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
  mptcp: depends on IPV6 but not as a module
  sfc: move initialisation of efx->filter_sem to efx_init_struct()
  mpls: load mpls_gso after mpls_iptunnel
  net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
  net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
  net: dsa: bcm_sf2: make const array static, makes object smaller
  mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
  ...

Pull gfs2 updates from Andreas Gruenbacher:

 - Use iomap for non-journaled buffered I/O. This largely eliminates
   buffer heads on filesystems where the block size matches the page
   size. Many thanks to Christoph Hellwig for this patch!

 - Fixes for some more journaled data filesystem bugs, found by running
   xfstests with data journaling on for all files (chattr +j $MNT) (Bob
   Peterson)

 - gfs2_evict_inode refactoring (Bob Peterson)

 - Use the statfs data in the journal during recovery instead of reading
   it in from the local statfs inodes (Abhi Das)

 - Several other minor fixes by various people

* tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (30 commits)
  gfs2: Recover statfs info in journal head
  gfs2: lookup local statfs inodes prior to journal recovery
  gfs2: Add fields for statfs info in struct gfs2_log_header_host
  gfs2: Ignore subsequent errors after withdraw in rgrp_go_sync
  gfs2: Eliminate gl_vm
  gfs2: Only access gl_delete for iopen glocks
  gfs2: Fix comments to glock_hash_walk
  gfs2: eliminate GLF_QUEUED flag in favor of list_empty(gl_holders)
  gfs2: Ignore journal log writes for jdata holes
  gfs2: simplify gfs2_block_map
  gfs2: Only set PageChecked if we have a transaction
  gfs2: don't lock sd_ail_lock in gfs2_releasepage
  gfs2: make gfs2_ail1_empty_one return the count of active items
  gfs2: Wipe jdata and ail1 in gfs2_journal_wipe, formerly gfs2_meta_wipe
  gfs2: enhance log_blocks trace point to show log blocks free
  gfs2: add missing log_blocks trace points in gfs2_write_revokes
  gfs2: rename gfs2_write_full_page to gfs2_write_jdata_page, remove parm
  gfs2: add validation checks for size of superblock
  gfs2: use-after-free in sysfs deregistration
  gfs2: Fix NULL pointer dereference in gfs2_rgrp_dump
  ...

Pull cifs updates from Steve French:

 - add support for recognizing special file types (char/block/fifo/
   symlink) for files created by Linux on WSL (a format we plan to move
   to as the default for creating special files on Linux, as it has
   advantages over the other current option, the SFU format) in readdir.

 - fix double queries to root directory when directory leases not
   supported (e.g. Samba)

 - fix querying mode bits (modefromsid mount option) for special file
   types

 - stronger encryption (gcm256), disabled by default until tested more
   broadly

 - allow querying owner when server reports 'well known SID' on query
   dir with SMB3.1.1 POSIX extensions

* tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (30 commits)
  SMB3: add support for recognizing WSL reparse tags
  cifs: remove bogus debug code
  smb3.1.1: fix typo in compression flag
  cifs: move smb version mount options into fs_context.c
  cifs: move cache mount options to fs_context.ch
  cifs: move security mount options into fs_context.ch
  cifs: add files to host new mount api
  smb3: do not try to cache root directory if dir leases not supported
  smb3: fix stat when special device file and mounted with modefromsid
  cifs: Print the address and port we are connecting to in generic_ip_connect()
  SMB3: Resolve data corruption of TCP server info fields
  cifs: make const array static, makes object smaller
  SMB3.1.1: Fix ids returned in POSIX query dir
  smb3: add dynamic trace point to trace when credits obtained
  smb3.1.1: do not fail if no encryption required but server doesn't support it
  cifs: Return the error from crypt_message when enc/dec key not found.
  smb3.1.1: set gcm256 when requested
  smb3.1.1: rename nonces used for GCM and CCM encryption
  smb3.1.1: print warning if server does not support requested encryption type
  smb3.1.1: add new module load parm enable_gcm_256
  ...

Pull clone/dedupe/remap code refactoring from Darrick Wong:
 "Move the generic file range remap (aka reflink and dedupe) functions
  out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to
  reduce clutter in the first two files"

* tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  vfs: move the generic write and copy checks out of mm
  vfs: move the remap range helpers to remap_range.c
  vfs: move generic_remap_checks out of mm

Pull KVM updates from Paolo Bonzini:
 "For x86, there is a new alternative and (in the future) more scalable
  implementation of extended page tables that does not need a reverse
  map from guest physical addresses to host physical addresses.

  For now it is disabled by default because it is still lacking a few of
  the existing MMU's bells and whistles. However it is a very solid
  piece of work and it is already available for people to hammer on it.

  Other updates:

  ARM:
   - New page table code for both hypervisor and guest stage-2
   - Introduction of a new EL2-private host context
   - Allow EL2 to have its own private per-CPU variables
   - Support of PMU event filtering
   - Complete rework of the Spectre mitigation

  PPC:
   - Fix for running nested guests with in-kernel IRQ chip
   - Fix race condition causing occasional host hard lockup
   - Minor cleanups and bugfixes

  x86:
   - allow trapping unknown MSRs to userspace
   - allow userspace to force #GP on specific MSRs
   - INVPCID support on AMD
   - nested AMD cleanup, on demand allocation of nested SVM state
   - hide PV MSRs and hypercalls for features not enabled in CPUID
   - new test for MSR_IA32_TSC writes from host and guest
   - cleanups: MMU, CPUID, shared MSRs
   - LAPIC latency optimizations ad bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
  kvm: x86/mmu: NX largepage recovery for TDP MMU
  kvm: x86/mmu: Don't clear write flooding count for direct roots
  kvm: x86/mmu: Support MMIO in the TDP MMU
  kvm: x86/mmu: Support write protection for nesting in tdp MMU
  kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
  kvm: x86/mmu: Support dirty logging for the TDP MMU
  kvm: x86/mmu: Support changed pte notifier in tdp MMU
  kvm: x86/mmu: Add access tracking for tdp_mmu
  kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
  kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
  kvm: x86/mmu: Add TDP MMU PF handler
  kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
  kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
  KVM: Cache as_id in kvm_memory_slot
  kvm: x86/mmu: Add functions to handle changed TDP SPTEs
  kvm: x86/mmu: Allocate and free TDP MMU roots
  kvm: x86/mmu: Init / Uninit the TDP MMU
  kvm: x86/mmu: Introduce tdp_iter
  KVM: mmu: extract spte.h and spte.c
  KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
  ...

Pull virtio updates from Michael Tsirkin:
 "vhost, vdpa, and virtio cleanups and fixes

  A very quiet cycle, no new features"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  MAINTAINERS: add URL for virtio-mem
  vhost_vdpa: remove unnecessary spin_lock in vhost_vring_call
  vringh: fix __vringh_iov() when riov and wiov are different
  vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK
  s390: virtio: PV needs VIRTIO I/O device protection
  virtio: let arch advertise guest's memory access restrictions
  vhost_vdpa: Fix duplicate included kernel.h
  vhost: reduce stack usage in log_used
  virtio-mem: Constify mem_id_table
  virtio_input: Constify id_table
  virtio-balloon: Constify id_table
  vdpa/mlx5: Fix failure to bring link up
  vdpa/mlx5: Make use of a specific 16 bit endianness API

Merge tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "cros-ec:
   - Error code cleanup across cros-ec by Guenter
   - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status

  cros_ec_typec:
   - Landed initial USB4 support in typec connector class driver for
     cros_ec
   - Role switch bugfix on disconnect, and reordering configuration
     steps

  cros_ec_lightbar:
   - Fix buffer outsize and result for get_lightbar_version

  misc:
   - Remove config MFD_CROS_EC, now that transition from MFD is complete
   - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard
     keymap"

* tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA
  platform/chrome: Use kobj_to_dev() instead of container_of()
  platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer()
  platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites
  platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config
  platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
  platform/chrome: cros_ec_trace: Add fields to command traces
  platform/chrome: cros_ec_typec: Re-order connector configuration steps
  platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect
  platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()
  platform/chrome: cros_ec_typec: USB4 support
  pwm: cros-ec: Simplify EC error handling
  platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
  platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT
  pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
  platform/chrome: cros_ec_sysfs: Report range of error codes from EC
  cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status
  iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code

Pull arch task_work cleanups from Jens Axboe:
 "Two cleanups that don't fit other categories:

   - Finally get the task_work_add() cleanup done properly, so we don't
     have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
     all callers, and also fixes up the documentation for
     task_work_add().

   - While working on some TIF related changes for 5.11, this
     TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
     duplication for how that is handled"

* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
  task_work: cleanup notification modes
  tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()

Pull ARC fix from Vineet Gupta:
 "I found a snafu in perf driver which made it into 5.9-rc4 and the fix
  should go in now than wait"

* tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: perf: redo the pct irq missing in device-tree handling

Pull more arm64 updates from Will Deacon:
 "A small selection of further arm64 fixes and updates. Most of these
  are fixes that came in during the merge window, with the exception of
  the HAVE_MOVE_PMD mremap() speed-up which we discussed back in 2018
  and somehow forgot to enable upstream.

   - Improve performance of Spectre-v2 mitigation on Falkor CPUs (if
     you're lucky enough to have one)

   - Select HAVE_MOVE_PMD. This has been shown to improve mremap()
     performance, which is used heavily by the Android runtime GC, and
     it seems we forgot to enable this upstream back in 2018.

   - Ensure linker flags are consistent between LLVM and BFD

   - Fix stale comment in Spectre mitigation rework

   - Fix broken copyright header

   - Fix KASLR randomisation of the linear map

   - Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)"

Link: https://lore.kernel.org/kvmarm/20181108181201.88826-3-joelaf@google.com/

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: proton-pack: Update comment to reflect new function name
  arm64: spectre-v2: Favour CPU-specific mitigation at EL2
  arm64: link with -z norelro regardless of CONFIG_RELOCATABLE
  arm64: Fix a broken copyright header in gen_vdso_offsets.sh
  arm64: mremap speedup - Enable HAVE_MOVE_PMD
  arm64: mm: use single quantity to represent the PA to VA translation
  arm64: reject prctl(PR_PAC_RESET_KEYS) on compat tasks

Apply the outstanding statfs changes in the journal head to the
master statfs file. Zero out the local statfs file for good measure.

Previously, statfs updates would be read in from the local statfs inode and
synced to the master statfs inode during recovery.

We now use the statfs updates in the journal head to update the master statfs
inode instead of reading in from the local statfs inode. To preserve backward
compatibility with kernels that can't do this, we still need to keep the
local statfs inode up to date by writing changes to it. At some point in the
future, we can do away with the local statfs inodes altogether and keep the
statfs changes solely in the journal.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

We need to lookup the master statfs inode and the local statfs
inodes earlier in the mount process (in init_journal) so journal
recovery can use them when it attempts to recover the statfs info.
We lookup all the local statfs inodes and store them in a linked
list to allow a node to recover statfs info for other nodes in the
cluster.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

When KVM maps a largepage backed region at a lower level in order to
make it executable (i.e. NX large page shattering), it reduces the TLB
performance of that region. In order to avoid making this degradation
permanent, KVM must periodically reclaim shattered NX largepages by
zapping them and allowing them to be rebuilt in the page fault handler.

With this patch, the TDP MMU does not respect KVM's rate limiting on
reclaim. It traverses the entire TDP structure every time. This will be
addressed in a future patch.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-21-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Direct roots don't have a write flooding count because the guest can't
affect that paging structure. Thus there's no need to clear the write
flooding count on a fast CR3 switch for direct roots.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-20-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In order to support MMIO, KVM must be able to walk the TDP paging
structures to find mappings for a given GFN. Support this walk for
the TDP MMU.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538

v2: Thanks to Dan Carpenter and kernel test robot for finding that root
was used uninitialized in get_mmio_spte.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20201014182700.2888246-19-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

To support nested virtualization, KVM will sometimes need to write
protect pages which are part of a shadowed paging structure or are not
writable in the shadowed paging structure. Add a function to write
protect GFN mappings for this purpose.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-18-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Dirty logging ultimately breaks down MMU mappings to 4k granularity.
When dirty logging is no longer needed, these granaular mappings
represent a useless performance penalty. When dirty logging is disabled,
search the paging structure for mappings that could be re-constituted
into a large page mapping. Zap those mappings so that they can be
faulted in again at a higher mapping level.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-17-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Dirty logging is a key feature of the KVM MMU and must be supported by
the TDP MMU. Add support for both the write protection and PML dirty
logging modes.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-16-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
a hook and handle the change_pte MMU notifier.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-15-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. The
main Linux MM uses the access tracking MMU notifiers for swap and other
features. Add hooks to handle the test/flush HVA (range) family of
MMU notifiers.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-14-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
hooks to handle the invalidate range family of MMU notifiers.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-13-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Attach struct kvm_mmu_pages to every page in the TDP MMU to track
metadata, facilitate NX reclaim, and enable inproved parallelism of MMU
operations in future patches.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-12-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add functions to handle page faults in the TDP MMU. These page faults
are currently handled in much the same way as the x86 shadow paging
based MMU, however the ordering of some operations is slightly
different. Future patches will add eager NX splitting, a fast page fault
handler, and parallel page faults.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull Kconfig updates from Masahiro Yamada:

 - Remove unused or useless code from qconf

 - Allow to edit "int", "hex", "string" options in place, and remove the
   separate edit box from qconf

* tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: qconf: create QApplication after option checks
  kconfig: qconf: remove Y, M, N columns
  kconfig: qconf: remove ConfigView class
  kconfig: qconf: move setShowName/Range() to ConfigList from ConfigView
  kconfig: qconf: remove ConfigLineEdit class
  kconfig: qconf: allow to edit "int", "hex", "string" menus in-place
  kconfig: qconf: show data column all the time
  kconfig: qconf: move ConfigView::updateList(All) to ConfigList class
  kconfig: qconf: remove unused ConfigItem::okRename()
  kconfig: qconf: update the intro message to match to the current code
  kconfig: qconf: reformat the intro message

Pull Kbuild updates from Masahiro Yamada:

 - Support 'make compile_commands.json' to generate the compilation
   database more easily, avoiding stale entries

 - Support 'make clang-analyzer' and 'make clang-tidy' for static checks
   using clang-tidy

 - Preprocess scripts/modules.lds.S to allow CONFIG options in the
   module linker script

 - Drop cc-option tests from compiler flags supported by our minimal
   GCC/Clang versions

 - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y

 - Use sha1 build id for both BFD linker and LLD

 - Improve deb-pkg for reproducible builds and rootless builds

 - Remove stale, useless scripts/namespace.pl

 - Turn -Wreturn-type warning into error

 - Fix build error of deb-pkg when CONFIG_MODULES=n

 - Replace 'hostname' command with more portable 'uname -n'

 - Various Makefile cleanups

* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: Use uname for LINUX_COMPILE_HOST detection
  kbuild: Only add -fno-var-tracking-assignments for old GCC versions
  kbuild: remove leftover comment for filechk utility
  treewide: remove DISABLE_LTO
  kbuild: deb-pkg: clean up package name variables
  kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
  kbuild: enforce -Werror=return-type
  scripts: remove namespace.pl
  builddeb: Add support for all required debian/rules targets
  builddeb: Enable rootless builds
  builddeb: Pass -n to gzip for reproducible packages
  kbuild: split the build log of kallsyms
  kbuild: explicitly specify the build id style
  scripts/setlocalversion: make git describe output more reliable
  kbuild: remove cc-option test of -Werror=date-time
  kbuild: remove cc-option test of -fno-stack-check
  kbuild: remove cc-option test of -fno-strict-overflow
  kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
  kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
  kbuild: do not create built-in objects for external module builds
  ...

Pull modules updates from Jessica Yu:
 "Code cleanups: more informative error messages and statically
  initialize init_free_wq to avoid a workqueue warning"

* tag 'modules-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: statically initialize init section freeing data
  module: Add more error message for failed kernel module loading

Pull VFIO updates from Alex Williamson:

 - New fsl-mc vfio bus driver supporting userspace drivers of objects
   within NXP's DPAA2 architecture (Diana Craciun)

 - Support for exposing zPCI information on s390 (Matthew Rosato)

 - Fixes for "detached" VFs on s390 (Matthew Rosato)

 - Fixes for pin-pages and dma-rw accesses (Yan Zhao)

 - Cleanups and optimize vconfig regen (Zenghui Yu)

 - Fix duplicate irq-bypass token registration (Alex Williamson)

* tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
  vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
  vfio/pci: Clear token on bypass registration failure
  vfio/fsl-mc: fix the return of the uninitialized variable ret
  vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger
  vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit
  MAINTAINERS: Add entry for s390 vfio-pci
  vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO
  vfio/fsl-mc: Add support for device reset
  vfio/fsl-mc: Add read/write support for fsl-mc devices
  vfio/fsl-mc: trigger an interrupt via eventfd
  vfio/fsl-mc: Add irq infrastructure for fsl-mc devices
  vfio/fsl-mc: Added lock support in preparation for interrupt handling
  vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions
  vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call
  vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl
  vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind
  vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO
  s390/pci: track whether util_str is valid in the zpci_dev
  s390/pci: stash version in the zpci_dev
  vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices
  ...

Pull rpmsg updates from Bjorn Andersson:
 "This introduces rpmsg_char support for GLINK and fixes a few issues"

* tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  rpmsg: glink: Expose rpmsg name attr for glink
  rpmsg: glink: Add support for rpmsg glink chrdev
  rpmsg: Guard against null endpoint ops in destroy
  rpmsg: glink: Use complete_all for open states
  rpmsg: virtio: fix compilation warning for virtio_rpmsg_channel description
  rpmsg: Avoid double-free in mtk_rpmsg_register_device
  rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()

Pull remoteproc updates from Bjorn Andersson:
 "This introduces support for the Mediatek MT9182 SCP and controlling
  the Cortex R5F processors found in TI K3 platforms. It clones the
  longstanding debugfs interface for controlling crash handling to
  sysfs. Lastly it solves a bug where after a warm reset of Qualcomm
  platforms the modem would crash upon first boot"

* tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  remoteproc/mediatek: Remove non-standard dsb()
  remoteproc: Add recovery configuration to the sysfs interface
  remoteproc: Add coredump as part of sysfs interface
  remoteproc: Change default dump configuration to "disabled"
  remoteproc: k3-r5: Add loading support for on-chip SRAM regions
  remoteproc: k3-r5: Initialize TCM memories for ECC
  remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem
  dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs
  remoteproc/mediatek: Add support for mt8192 SCP
  remoteproc: Fixup coredump debugfs disable request
  remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot
  remoteproc/mediatek: fix null pointer dereference on null scp pointer
  remoteproc: stm32: Fix pointer assignement
  remoteproc: scp: add COMPILE_TEST dependency

Pull clk updates from Stephen Boyd:
 "This contains no changes to the core framework. It is a collection of
  various clk driver updates.

  The biggest driver updates in terms of lines of code is the Allwinner
  driver, closely followed by the Qualcomm and Mediatek drivers. All of
  those hit high because we add so many lines of clk data. Coming in
  fourth place is i.MX which also adds a bunch of clk data. This
  accounts for the new driver additions this time around.

  Otherwise the patches are lots of little cleanups and fixes for
  various clk drivers that have baked in linux-next for a while. I
  suppose one highlight or theme is that more clk drivers are being
  updated to work as modules, which is interesting to see such critical
  SoC infrastructure work as a loadable module.

  New Drivers:
   - Support qcom SM8150/SM8250 video and display clks
   - Support Mediatek MT8167 clks
   - Add clock for CRC block found on vf610 SoCs
   - Add support for the Renesas R-Car V3U (R8A779A0) SoC
   - Add support for the VSP for Resizing clock on Renesas RZ/G1H
   - Support Allwinner A100 SoC clks

  Removed Drivers:
   - Remove i.MX21 clock driver, as i.MX21 platform support is being
     dropped

  Updates:
   - Change how qcom's display port clks work
   - Small non-critical fixes for TI clk driver
   - Remove various unused variables in clk drivers
   - Allow Rockchip clk driver to be a module
   - Remove most __clk_lookup() calls in Samsung drivers (yay!)
   - Support building i.MX ARMv8 platforms clock driver as module
   - Some kerneldoc fixes here and there
   - A couple of minor i.MX clk data corrections
   - Update audio clock inverter and fdiv2 flag on Amlogic g12
   - Make amlogic clk drivers configurable in Kconfig
   - Fix Renesas VSP clock names to match corrected hardware
     documentation
   - Sigma-delta modulation on Allwinner R40
   - Various fixes for at91 clk driver
   - Use semicolons instead of commas in some places
   - Mark some variables const so they can move to RO memory"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
  clk: imx8mq: Fix usdhc parents order
  clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
  clk: Restrict CLK_HSDK to ARC_SOC_HSDK
  clk: at91: sam9x60: support only two programmable clocks
  clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
  clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
  clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
  clk: ingenic: Use readl_poll_timeout instead of custom loop
  clk: ingenic: Use to_clk_info() macro for all clocks
  clk: bcm2835: add missing release if devm_clk_hw_register fails
  clk: at91: clk-sam9x60-pll: remove unused variable
  clk: at91: clk-main: update key before writing AT91_CKGR_MOR
  clk: at91: remove the checking of parent_name
  clk: clk-prima2: fix return value check in prima2_clk_init()
  clk: mmp2: Fix the display clock divider base
  clk: pxa: Constify static struct clk_ops
  clk: baikal-t1: Mark Ethernet PLL as critical
  clk: qoriq: modify MAX_PLL_DIV to 32
  clk: axi-clkgen: Set power bits for fractional mode
  clk: axi-clkgen: Add support for fractional dividers
  ...

Merge tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This release cycle's updates are mostly cleanup and some minor fixes"

* tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support
  dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support
  pwm: Allow store 64-bit duty cycle from sysfs interface
  pwm: img: Fix null pointer access in probe
  pwm: pca9685: Disable unused alternative addresses
  pwm: pca9685: Use BIT() macro instead of shift
  pwm: pca9685: Make comments more consistent
  pwm: sun4i: Simplify with dev_err_probe()
  pwm: sprd: Simplify with dev_err_probe()
  pwm: sifive: Simplify with dev_err_probe()
  pwm: rockchip: Simplify with dev_err_probe()
  pwm: jz4740: Simplify with dev_err_probe()
  pwm: bcm2835: Simplify with dev_err_probe()
  pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro
  pwm: rockchip: Keep enabled PWMs running while probing
  dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
     Liu)
   - Add schedule point in pci_read_config() to reduce max latency
     (Jiang Biao)
   - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)

  Resource management:
   - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
     Pieralisi)

  PCIe native device hotplug:
   - Reduce noisiness on hot removal (Lukas Wunner)

  Power management:
   - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
     that was done on the basis of spec typo (Bjorn Helgaas)
   - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
     ambiguity (Krzysztof Wilczyński)
   - Remove unused pcibios_pm_ops (Vaibhav Gupta)

  IOMMU:
   - Enable Translation Blocking for external devices to harden against
     DMA attacks (Rajat Jain)

  Error handling:
   - Add an ACPI APEI notifier chain for vendor CPER records to enable
     device-specific error handling (Shiju Jose)

  ASPM:
   - Remove struct aspm_register_info to simplify code (Saheed O.
     Bolarinwa)

  Amlogic Meson PCIe controller driver:
   - Build as module by default (Kevin Hilman)

  Ampere Altra PCIe controller driver:
   - Add MCFG quirk to work around non-standard ECAM implementation
     (Tuan Phan)

  Broadcom iProc PCIe controller driver:
   - Set affinity mask on MSI interrupts (Mark Tomlinson)

  Broadcom STB PCIe controller driver:
   - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
   - Add DT bindings for more Brcmstb chips (Jim Quinlan)
   - Add bcm7278 register info (Jim Quinlan)
   - Add bcm7278 PERST# support (Jim Quinlan)
   - Add suspend and resume pm_ops (Jim Quinlan)
   - Add control of rescal reset (Jim Quinlan)
   - Set additional internal memory DMA viewport sizes (Jim Quinlan)
   - Accommodate MSI for older chips (Jim Quinlan)
   - Set bus max burst size by chip type (Jim Quinlan)
   - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:
   - Use dev_err_probe() to reduce redundant messages (Anson Huang)

  Freescale Layerscape PCIe controller driver:
   - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
   - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint test support for lS1088a (Xiaowei Bao)
   - Add MSI-X support for ls1088a (Xiaowei Bao)

  HiSilicon HIP PCIe controller driver:
   - Handle HIP-specific errors via ACPI APEI (Yicong Yang)

  HiSilicon Kirin PCIe controller driver:
   - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)

  Intel VMD host bridge driver:
   - Factor out physical offset, bus offset, IRQ domain, IRQ allocation
     (Jon Derrick)
   - Use generic PCI PM correctly (Jon Derrick)

  Marvell Aardvark PCIe controller driver:
   - Fix compilation on s390 (Pali Rohár)
   - Implement driver 'remove' function and allow to build it as module
     (Pali Rohár)
   - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
   - Convert mvebu a3700 internal SMCC firmware return codes to errno
     (Pali Rohár)
   - Fix initialization with old Marvell's Arm Trusted Firmware (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:
   - Fix hibernation in case interrupts are not re-created (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:
   - Stop checking return value of debugfs_create() functions (Greg
     Kroah-Hartman)
   - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)

  Qualcomm PCIe controller driver:
   - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)

  Renesas R-Car PCIe controller driver:
   - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
     (Lad Prabhakar)
   - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
   - Add DT support for r8a7742 (Lad Prabhakar)

  Socionext UniPhier Pro5 controller driver:
   - Add DT descriptions of iATU register (host and endpoint) (Kunihiko
     Hayashi)

  Synopsys DesignWare PCIe controller driver:
   - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
     unavoidable) (Hou Zhiqiang)
   - Fix endpoint Header Type check so multi-function devices work (Hou
     Zhiqiang)
   - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
   - Stop leaking MSI page in suspend/resume (Jisheng Zhang)
   - Add common iATU register support instead of keystone-specific code
     (Kunihiko Hayashi)
   - Major config space access and other cleanups in dwc core and
     drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
     kirin, meson, qcom, tegra) (Rob Herring)
   - Add multiple PFs support for endpoint (Xiaowei Bao)
   - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)

  Miscellaneous:
   - Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
   - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
   - Fix "cast truncates bits from constant value" warnings (Gustavo
     Pimentel)
   - Remove redundant zeroing for sg_init_table() (Julia Lawall)
   - Use scnprintf(), not snprintf(), in sysfs "show" functions
     (Krzysztof Wilczyński)
   - Remove unused assignments (Krzysztof Wilczyński)
   - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
   - Simplify bool comparisons (Krzysztof Wilczyński)
   - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
     Miao)
   - Simplify return expressions (Qinglang Miao)"

* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
  PCI: vmd: Update VMD PM to correctly use generic PCI PM
  PCI: vmd: Create IRQ allocation helper
  PCI: vmd: Create IRQ Domain configuration helper
  PCI: vmd: Create bus offset configuration helper
  PCI: vmd: Create physical offset helper
  PCI: v3-semi: Remove unneeded break
  PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
  PCI/ASPM: Remove struct pcie_link_state.l1ss
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
  PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
  PCI/ASPM: Remove struct aspm_register_info.latency_encoding
  PCI/ASPM: Remove struct aspm_register_info.enabled
  PCI/ASPM: Remove struct aspm_register_info.support
  PCI/ASPM: Use 'parent' and 'child' for readability
  PCI/ASPM: Move LTR path check to where it's used
  PCI/ASPM: Move pci_clear_and_set_dword() earlier
  PCI: dwc: Fix MSI page leakage in suspend/resume
  ...

In the header prediction fast path for a bulk data receiver, if no
data is newly acknowledged then we do not call tcp_ack() and do not
call tcp_ack_update_window(). This means that a bulk receiver that
receives large amounts of data can have the incoming sequence numbers
wrap, so that the check in tcp_may_update_window fails:
   after(ack_seq, tp->snd_wl1)

If the incoming receive windows are zero in this state, and then the
connection that was a bulk data receiver later wants to send data,
that connection can find itself persistently rejecting the window
updates in incoming ACKs. This means the connection can persistently
fail to discover that the receive window has opened, which in turn
means that the connection is unable to send anything, and the
connection's sending process can get permanently "stuck".

The fix is to update snd_wl1 in the header prediction fast path for a
bulk data receiver, so that it keeps up and does not see wrapping
problems.

This fix is based on a very nice and thorough analysis and diagnosis
by Apollon Oikonomopoulos (see link below).

This is a stable candidate but there is no Fixes tag here since the
bug predates current git history. Just for fun: looks like the bug
dates back to when header prediction was added in Linux v2.1.8 in Nov
1996. In that version tcp_rcv_established() was added, and the code
only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to
apply cleanly at least as far back as v3.2.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reported-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Tested-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Link: https://www.spinics.net/lists/netdev/msg692430.htmlAcked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022143331.1887495-1-ncardwell.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In setsockopt(SO_MAX_PACING_RATE) on 64bit systems, sk_max_pacing_rate,
after extended from 'u32' to 'unsigned long', takes unintentionally
hiked value whenever assigned from an 'int' value with MSB=1, due to
binary sign extension in promoting s32 to u64, e.g. 0x80000000 becomes
0xFFFFFFFF80000000.

Thus inflated sk_max_pacing_rate causes subsequent getsockopt to return
~0U unexpectedly. It may also result in increased pacing rate.

Fix by explicitly casting the 'int' value to 'unsigned int' before
assigning it to sk_max_pacing_rate, for zero extension to happen.

Fixes: 76a9ebe8 ("net: extend sk_pacing_rate to unsigned long")
Signed-off-by: Ji Li <jli@akamai.com>
Signed-off-by: Ke Li <keli@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022064146.79873-1-keli@akamai.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Update debugging in IPVS tcp protocol handler to make it easier
   to understand, from longguang.yue

2) Update TCP tracker to deal with keepalive packet after
   re-registration, from Franceso Ruggeri.

3) Missing IP6SKB_FRAGMENTED from netfilter fragment reassembly,
   from Georg Kohmann.

4) Fix bogus packet drop in ebtables nat extensions, from
   Thimothee Cocault.

5) Fix typo in flowtable documentation.

6) Reset skb timestamp in nft_fwd_netdev.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

commit feb92d7d "(ARC: perf: don't bail setup if pct irq
missing in device-tree)" introduced a silly brown-paper bag bug:
The assignment and comparison in an if statement were not bracketed
correctly leaving the order of evaluation undefined.

|
| if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
|                           ^^^                         ^^^^

And given such a chance, the compiler will bite you hard, fully entitled
to generating this piece of beauty:

|
| # if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
|
| bl.d @platform_get_irq  <-- irq returned in r0
|
| setge r2, r0, 0   	<-- r2 is bool 1 or 0 if irq >= 0 true/false
| brlt.d r0, 0, @.L114
|
| st_s	r2,[sp]    	<-- irq saved is bool 1 or 0, not actual return val
| st	1,[r3,160]   	# arc_pmu.18_29->irq <-- drops bool and assumes 1
|
| # return __request_percpu_irq(irq, handler, 0,
|
| bl.d @__request_percpu_irq;
| mov_s	r0,1	   <-- drops even bool and assumes 1 which fails

With the snafu fixed, everything is as expected.

| bl.d @platform_get_irq	<-- returns irq in r0
|
| mov_s	r2,r0
| brlt.d r2, 0, @.L112
|
| st_s	r0,[sp]			<-- irq isaved is actual return value above
| st	r0,[r13,160]	#arc_pmu.18_27->irq
|
| bl.d @__request_percpu_irq	<-- r0 unchanged so actual irq returned
| add r4,r4,r12	#, tmp363, __ptr

Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Pull ext4 updates from Ted Ts'o:
 "The siginificant new ext4 feature this time around is Harshad's new
  fast_commit mode.

  In addition, thanks to Mauricio for fixing a race where mmap'ed pages
  that are being changed in parallel with a data=journal transaction
  commit could result in bad checksums in the failure that could cause
  journal replays to fail.

  Also notable is Ritesh's buffered write optimization which can result
  in significant improvements on parallel write workloads. (The kernel
  test robot reported a 330.6% improvement on fio.write_iops on a 96
  core system using DAX)

  Besides that, we have the usual miscellaneous cleanups and bug fixes"

Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
  ext4: fix invalid inode checksum
  ext4: add fast commit stats in procfs
  ext4: add a mount opt to forcefully turn fast commits on
  ext4: fast commit recovery path
  jbd2: fast commit recovery path
  ext4: main fast-commit commit path
  jbd2: add fast commit machinery
  ext4 / jbd2: add fast commit initialization
  ext4: add fast_commit feature and handling for extended mount options
  doc: update ext4 and journalling docs to include fast commit feature
  ext4: Detect already used quota file early
  jbd2: avoid transaction reuse after reformatting
  ext4: use the normal helper to get the actual inode
  ext4: fix bs < ps issue reported with dioread_nolock mount opt
  ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()
  ext4: data=journal: fixes for ext4_page_mkwrite()
  jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers()
  jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers()
  ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable()
  ext4: use ext4_sb_bread() instead of sb_bread()
  ...