- 15 Jun, 2010 1 commit
-
-
Eric Dumazet authored
- clusterip_lock becomes a spinlock - lockless lookups - kfree() deferred after RCU grace period - rcu_barrier_bh() inserted in clusterip_tg_exit() v2) - As Patrick pointed out, we use atomic_inc_not_zero() in clusterip_config_find_get(). - list_add_rcu() and list_del_rcu() variants are used. - atomic_dec_and_lock() used in clusterip_config_entry_put() Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Patrick McHardy <kaber@trash.net>
-
- 14 Jun, 2010 4 commits
-
-
Shan Wei authored
The parameter (work) is unused, remove it. Reported from Eric Dumazet. Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Acked-by:
-
Shan Wei authored
Instead of doing one atomic operation per frag, we can factorize them. Reported from Eric Dumazet. Signed-off-by:
-
Shan Wei authored
If the returned csum value is 0, We has set ip_summed with CHECKSUM_UNNECESSARY flag in __skb_checksum_complete_head(). So this patch kills the check and changes to return to upper caller directly. Signed-off-by:
-
Eric Dumazet authored
- must use atomic_inc_not_zero() in instance_lookup_get() - must use hlist_add_head_rcu() instead of hlist_add_head() - must use hlist_del_rcu() instead of hlist_del() - Introduce NFULNL_COPY_DISABLED to stop lockless reader from using an instance, before we do final instance_put() on it. Signed-off-by:
-
- 09 Jun, 2010 6 commits
-
-
Eric Dumazet authored
- instances_lock becomes a spinlock - lockless lookups While nfnetlink_log probably not performance critical, using less rwlocks in our code is always welcomed... Signed-off-by:
-
Eric Dumazet authored
- Use an atomic_t for id_sequence to avoid a spin_lock/spin_unlock pair - Group highly modified struct nfqnl_instance fields together Signed-off-by:
-
Eric Dumazet authored
Converts queue_lock rwlock to a spinlock. (readlocked part can be changed by reads of integer values) One atomic operation instead of four per ipq_enqueue_packet() call. Signed-off-by:
-
Eric Dumazet authored
Converts queue_lock rwlock to a spinlock. (readlocked part can be changed by reads of integer values) One atomic operation instead of four per ipq_enqueue_packet() call. Signed-off-by:
-
Shan Wei authored
Use WORD_ROUND to round an int up to the next multiple of 4. Signed-off-by:
-
Eric Dumazet authored
NOTRACK makes all cpus share a cache line on nf_conntrack_untracked twice per packet, slowing down performance. This patch converts it to a per_cpu variable. Signed-off-by:
-
- 08 Jun, 2010 2 commits
-
-
Eric Dumazet authored
NOTRACK makes all cpus share a cache line on nf_conntrack_untracked twice per packet. This is bad for performance. __read_mostly annotation is also a bad choice. This patch introduces IPS_UNTRACKED bit so that we can use later a per_cpu untrack structure more easily. A new helper, nf_ct_untracked_get() returns a pointer to nf_conntrack_untracked. Another one, nf_ct_untracked_status_or() is used by nf_nat_init() to add IPS_NAT_DONE_MASK bits to untracked status. nf_ct_is_untracked() prototype is changed to work on a nf_conn pointer. Signed-off-by:
-
Eric Dumazet authored
We currently dirty two cache lines in struct xt_rateest, this hurts SMP performance. This patch moves lock/bstats/rstats at beginning of structure so that they share a single cache line. Signed-off-by:
-
- 04 Jun, 2010 1 commit
-
-
Eric Dumazet authored
Using vmalloc_node(size, numa_node_id()) for temporary storage is not needed. vmalloc(size) is more respectful of user NUMA policy. Signed-off-by:
-
- 01 Jun, 2010 2 commits
-
-
Eric Dumazet authored
Use atomic_cmpxchg() to avoid dirtying a shared location. xt_statistic_priv smp aligned to avoid sharing same cache line with other stuff. Signed-off-by:
-
Eric Dumazet authored
Avoid dirtying bridge_parent_rtable refcount, using new dst noref infrastructure. Signed-off-by:
-
- 31 May, 2010 24 commits
-
-
Daniel Mack authored
- shuffle around functions to get rid of forward declarations - fix some CodingStyle and indentation issues - last but not least, get rid of the following CONFIG_MODULE=n warning: drivers/net/arcnet/capmode.c:52: warning: ‘capmode_proto’ defined but not used Signed-off-by:
Daniel Mack <daniel@caiaq.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: -
Junchang Wang authored
readl() returns a 32-bit integer on all platforms. There is no need to cast its return value. Signed-off-by:
Junchang Wang <junchangwang@gmail.com> Signed-off-by:
-
Junchang Wang authored
ioread32() returns a 32-bit integer on all platforms. There is no need to cast its return value. Signed-off-by:
-
chas williams - CONTRACTOR authored
Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by:
Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by:
-
chas williams - CONTRACTOR authored
Signed-off-by:
-
chas williams - CONTRACTOR authored
Signed-off-by:
-
chas williams - CONTRACTOR authored
Signed-off-by:
-
Eli Cohen authored
Today, there are no means to know which port of a hardware device a netdev interface uses. struct net_device conatins a field, dev_id, that can be used for that. Use this field to save the port number in ConnectX that is being used by the net device; port numbers are zero based. Signed-off-by:
Eli Cohen <eli@mellanox.co.il> Signed-off-by:
-
Ian Campbell authored
Use newly introduced netif_notify_peers() method to ensure a gratuitous ARP is generated after a migration. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: xen-devel@lists.xensource.com Cc: stable@kernel.org Signed-off-by:
-
Ian Campbell authored
Currently such notifications are only generated when the device comes up or the address changes. However one use case for these notifications is to enable faster network recovery after a virtual machine migration (by causing switches to relearn their MAC tables). A migration appears to the network stack as a temporary loss of carrier and therefore does not trigger either of the current conditions. Rather than adding carrier up as a trigger (which can cause issues when interfaces a flapping) simply add an interface which the driver can use to explicitly trigger the notification. Signed-off-by:
-
Ian Campbell authored
This option causes a gratuitous ARP request, not a reply as the documentation currently suggests. Signed-off-by:
-
Dan Carpenter authored
"phyinfo" can never be null here because we assigned it an address, so I removed both the assert and the second check inside the if statement. I removed the "phyinfo->phy_layer != NULL" check as well because that was asserted earlier. Walter Harms suggested I move the "phyinfo->phy_ref_count++;" outside the if condition for readability, so I have done that. Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by:
-
Dan Carpenter authored
We already dereferenced uaddr towards the start of the function when we checked that "uaddr->sa_family != AF_CAIF". Both the check here and the earlier check were added in bece7b23: "caif: Rewritten socket implementation". Before that patch, we assumed that we recieved a valid pointer for uaddr, and based on that, I have removed this check. Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
-
Eric Dumazet authored
tcp_md5_hash_skb_data() should handle skb->frag_list, and eventually recurse. Signed-off-by:
-
Eric Dumazet authored
netpoll does an interesting work in zap_completion_queue(), but this was before we did skb orphaning before delivering packets to device. It now makes sense to add a test in dev_kfree_skb_irq() to not queue a skb if already orphaned, and to remove netpoll zap_completion_queue() as a bonus. Signed-off-by:
-
Eric Dumazet authored
This patch saves 224 bytes of text on my machine. __this_cpu_inc() generates a single instruction, using no scratch registers : 65 ff 04 25 a8 30 01 00 incl %gs:0x130a8 instead of : 48 c7 c2 80 30 01 00 mov $0x13080,%rdx 65 48 8b 04 25 88 ea 00 00 mov %gs:0xea88,%rax 83 44 10 28 01 addl $0x1,0x28(%rax,%rdx,1) Signed-off-by:
-
