- 20 Jun, 2014 37 commits
-
-
Ben Hutchings authored
commit 28a821c3 upstream. This function is largely a duplicate of paste_selection() in drivers/tty/vt/selection.c, but with its own selection state. The speakup selection mechanism should really be merged with vt. For now, apply the changes from 'TTY: vt, fix paste_selection ldisc handling', 'tty: Make ldisc input flow control concurrency-friendly', and 'tty: Fix unsafe vt paste_selection()'. References: https://bugs.debian.org/735202 References: https://bugs.debian.org/744015Reported-by:
Paul Gevers <elbrus@debian.org> Reported-and-tested-by:
Jarek Czekalski <jarekczek@poczta.onet.pl> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Ian Abbott authored
commit ffed54dc upstream. I got a patch from the original author, Fred Brooks, to add a small settling delay after setting the AI channel multiplexor. The lack of delay resulted in unstable or scrambled data on faster processors. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Reported-by:
Fred Brooks <nsaspook@nsaspook.com> Signed-off-by:
-
Ben Hutchings authored
commit d7500135 upstream. Input is handled in softirq context, but when pasting we may need to sleep. speakup_paste_selection() currently tries to bodge this by busy-waiting if in_atomic(), but that doesn't help because the ldisc may also sleep. For bonus breakage, speakup_paste_selection() changes the state of current, even though it's not running in process context. Move it into a work item and make sure to cancel it on exit. References: https://bugs.debian.org/735202 References: https://bugs.debian.org/744015Reported-by:
-
Mathias Nyman authored
commit 5dc2808c upstream. Lists of endpoints are stored for bandwidth calculation for roothub ports. Make sure we remove all endpoints from the list before the whole device, containing its endpoints list_head stuctures, is freed. This used to be done in the wrong order in xhci_mem_cleanup(), and triggered an oops in resume from S4 (hibernate). Tested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
NeilBrown authored
commit 2ac295a5 upstream. Commit 8313b8e5 md: fix problem when adding device to read-only array with bitmap. added a called to md_reap_sync_thread() which cause a reshape thread to be interrupted (in particular, it could cause md_thread() to never even call md_do_sync()). However it didn't set MD_RECOVERY_INTR so ->finish_reshape() would not know that the reshape didn't complete. This only happens when mddev->ro is set and normally reshape threads don't run in that situation. But raid5 and raid10 can start a reshape thread during "run" is the array is in the middle of a reshape. They do this even if ->ro is set. So it is best to set MD_RECOVERY_INTR before abortingg the sync thread, just in case. Though it rare for this to trigger a problem it can cause data corruption because the reshape isn't finished properly. So it is suitable for any stable which the offending commit was applied to. (3.2 or later) Fixes: 8313b8e5Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
commit 3991b31e upstream. If mddev->ro is set, md_to_sync will (correctly) abort. However in that case MD_RECOVERY_INTR isn't set. If a RESHAPE had been requested, then ->finish_reshape() will be called and it will think the reshape was successful even though nothing happened. Normally a resync will not be requested if ->ro is set, but if an array is stopped while a reshape is on-going, then when the array is started, the reshape will be restarted. If the array is also set read-only at this point, the reshape will instantly appear to success, resulting in data corruption. Consequently, this patch is suitable for any -stable kernel. Signed-off-by:
-
Martin K. Petersen authored
commit 3b8d2676 upstream. Queued trim only works for some users with MU05 firmware. Revert to blacklisting all firmware versions. Introduced by commit d121f7d0 ("libata: Update queued trim blacklist for M5x0 drives") which this effectively reverts, while retaining the blacklisting of M550. See https://bugzilla.kernel.org/show_bug.cgi?id=71371 for reports of trouble with MU05 firmware. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Chris Wilson authored
commit 9aab8bff upstream. We only want to modifiy a single field in the userspace view of the execbuffer command buffer, so explicitly change that rather than copy everything back again. This serves two purposes: 1. The single fields are much cheaper to copy (constant size so the copy uses special case code) and much smaller than the whole array. 2. We modify the array for internal use that need to be masked from the user. Note: We need this backported since without it the next bugfix will blow up when userspace recycles batchbuffers and relocations. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Christian König authored
commit 60a44540 upstream. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Lai Jiangshan authored
commit 6acbfb96 upstream. Lai found that: WARNING: CPU: 1 PID: 13 at arch/x86/kernel/smp.c:124 native_smp_send_reschedule+0x2d/0x4b() ... migration_cpu_stop+0x1d/0x22 was caused by set_cpus_allowed_ptr() assuming that cpu_active_mask is always a sub-set of cpu_online_mask. This isn't true since 5fbd036b ("sched: Cleanup cpu_active madness"). So set active and online at the same time to avoid this particular problem. Fixes: 5fbd036b ("sched: Cleanup cpu_active madness") Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael wang <wangyun@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/53758B12.8060609@cn.fujitsu.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Heinz Mauelshagen authored
commit f1daa838 upstream. The DM cache target cannot cope with discards that span multiple cache blocks, so each discard bio that spans more than one cache block must get split by the DM core. Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Bibek Basu authored
commit c5450db8 upstream. While accessing cur_policy during executing events CPUFREQ_GOV_START, CPUFREQ_GOV_STOP, CPUFREQ_GOV_LIMITS, same mutex lock is not taken, dbs_data->mutex, which leads to race and data corruption while running continious suspend resume test. This is seen with ondemand governor with suspend resume test using rtcwake. Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = ed610000 [00000028] *pgd=adf11831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: nvhost_vi CPU: 1 PID: 3243 Comm: rtcwake Not tainted 3.10.24-gf5cf9e5 #1 task: ee708040 ti: ed61c000 task.ti: ed61c000 PC is at cpufreq_governor_dbs+0x400/0x634 LR is at cpufreq_governor_dbs+0x3f8/0x634 pc : [<c05652b8>] lr : [<c05652b0>] psr: 600f0013 sp : ed61dcb0 ip : 000493e0 fp : c1cc14f0 r10: 00000000 r9 : 00000000 r8 : 00000000 r7 : eb725280 r6 : c1cc1560 r5 : eb575200 r4 : ebad7740 r3 : ee708040 r2 : ed61dca8 r1 : 001ebd24 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: ad61006a DAC: 00000015 [<c05652b8>] (cpufreq_governor_dbs+0x400/0x634) from [<c055f700>] (__cpufreq_governor+0x98/0x1b4) [<c055f700>] (__cpufreq_governor+0x98/0x1b4) from [<c0560770>] (__cpufreq_set_policy+0x250/0x320) [<c0560770>] (__cpufreq_set_policy+0x250/0x320) from [<c0561dcc>] (cpufreq_update_policy+0xcc/0x168) [<c0561dcc>] (cpufreq_update_policy+0xcc/0x168) from [<c0561ed0>] (cpu_freq_notify+0x68/0xdc) [<c0561ed0>] (cpu_freq_notify+0x68/0xdc) from [<c008eff8>] (notifier_call_chain+0x4c/0x8c) [<c008eff8>] (notifier_call_chain+0x4c/0x8c) from [<c008f3d4>] (__blocking_notifier_call_chain+0x50/0x68) [<c008f3d4>] (__blocking_notifier_call_chain+0x50/0x68) from [<c008f40c>] (blocking_notifier_call_chain+0x20/0x28) [<c008f40c>] (blocking_notifier_call_chain+0x20/0x28) from [<c00aac6c>] (pm_qos_update_bounded_target+0xd8/0x310) [<c00aac6c>] (pm_qos_update_bounded_target+0xd8/0x310) from [<c00ab3b0>] (__pm_qos_update_request+0x64/0x70) [<c00ab3b0>] (__pm_qos_update_request+0x64/0x70) from [<c004b4b8>] (tegra_pm_notify+0x114/0x134) [<c004b4b8>] (tegra_pm_notify+0x114/0x134) from [<c008eff8>] (notifier_call_chain+0x4c/0x8c) [<c008eff8>] (notifier_call_chain+0x4c/0x8c) from [<c008f3d4>] (__blocking_notifier_call_chain+0x50/0x68) [<c008f3d4>] (__blocking_notifier_call_chain+0x50/0x68) from [<c008f40c>] (blocking_notifier_call_chain+0x20/0x28) [<c008f40c>] (blocking_notifier_call_chain+0x20/0x28) from [<c00ac228>] (pm_notifier_call_chain+0x1c/0x34) [<c00ac228>] (pm_notifier_call_chain+0x1c/0x34) from [<c00ad38c>] (enter_state+0xec/0x128) [<c00ad38c>] (enter_state+0xec/0x128) from [<c00ad400>] (pm_suspend+0x38/0xa4) [<c00ad400>] (pm_suspend+0x38/0xa4) from [<c00ac114>] (state_store+0x70/0xc0) [<c00ac114>] (state_store+0x70/0xc0) from [<c027b1e8>] (kobj_attr_store+0x14/0x20) [<c027b1e8>] (kobj_attr_store+0x14/0x20) from [<c019cd9c>] (sysfs_write_file+0x104/0x184) [<c019cd9c>] (sysfs_write_file+0x104/0x184) from [<c0143038>] (vfs_write+0xd0/0x19c) [<c0143038>] (vfs_write+0xd0/0x19c) from [<c0143414>] (SyS_write+0x4c/0x78) [<c0143414>] (SyS_write+0x4c/0x78) from [<c000f080>] (ret_fast_syscall+0x0/0x30) Code: e1a00006 eb084346 e59b0020 e5951024 (e5903028) ---[ end trace 0488523c8f6b0f9d ]--- Signed-off-by:
Bibek Basu <bbasu@nvidia.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Rabin Vincent authored
commit 483a6c9d upstream. According to the ARM ARM, the behaviour is UNPREDICTABLE if the PC read from the exception return stack is not half word aligned. See the pseudo code for ExceptionReturn() and PopStack(). The signal handler's address has the bit 0 set, and setup_return() directly writes this to regs->ARM_pc. Current hardware happens to discard this bit, but QEMU's emulation doesn't and this makes processes crash. Mask out bit 0 before the exception return in order to get predictable behaviour. Fixes: 19c4d593 ("ARM: ARMv7-M: Add support for exception handling") Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Andrey Ryabinin authored
commit 537094b6 upstream. According to arm procedure call standart r2 register is call-cloberred. So after the result of x expression was put into r2 any following function call in p may overwrite r2. To fix this, the result of p expression must be saved to the temporary variable before the assigment x expression to __r2. Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
-
Laurent Pinchart authored
commit 98d7e1ae upstream. Commit 7b2e1277 ("ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5") enabled clock rate back-propagation from cam_mclk do dpll4_m5 on OMAP3630 only. Perform back-propagation on other OMAP3 platforms as well. Reported-by:
Jean-Philippe François <jp.francois@cynove.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Peter Ujfalusi authored
commit 0f9e19ad upstream. McPDM need to be configured to NO_IDLE mode when it is in used otherwise vital clocks will be gated which results 'slow motion' audio playback. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Emil Goode authored
commit d1d70e5d upstream. If we fail to allocate struct platform_device pdev we dereference it after the goto label err. This bug was found using coccinelle. Fixes: afa77ef3 (ARM: mx3: dynamically allocate "ipu-core" devices) Signed-off-by:
Emil Goode <emilgoode@gmail.com> Acked-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Joe Lawrence authored
commit 6aa6caff upstream. The recent change in sysfs, bcdde7e2 "sysfs: make __sysfs_remove_dir() recursive" revealed an asymmetric rphy device creation/deletion sequence in scsi_transport_sas: modprobe mpt2sas sas_rphy_add device_add A rphy->dev device_add B sas_device transport class device_add C sas_end_device transport class device_add D bsg class rmmod mpt2sas sas_rphy_delete sas_rphy_remove device_del B device_del C device_del A sysfs_remove_group recursive sysfs dir removal sas_rphy_free device_del D warning where device A is the parent of B, C, and D. When sas_rphy_free tries to unregister the bsg request queue (device D above), the ensuing sysfs cleanup discovers that its sysfs group has already been removed and emits a warning, "sysfs group... not found for kobject 'end_device-X:0'". Since bsg creation is a side effect of sas_rphy_add, move its complementary removal call into sas_rphy_remove. This imposes the following tear-down order for the devices above: D, B, C, A. Note the sas_device and sas_end_device transport class devices (B and C above) are created and destroyed both via the list match traversal in attribute_container_device_trigger, so the order in which they are handled is fixed. This is fine as long as they are deleted before their parent device. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Acked-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Alex Deucher authored
commit d8ade352 upstream. Newer PX systems have non-VGA pci class dGPUs. Update the ATRM fetch method to handle those cases. bug: https://bugzilla.kernel.org/show_bug.cgi?id=75401Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Christian König authored
commit 54409259 upstream. Placing them exclusively into VRAM might not work all the time. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=78297Signed-off-by:
-
Ben Skeggs authored
commit 0f1d360b upstream. Fixes a LVDS bleed issue on Lenovo W530 that can occur under a number of circumstances. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Jean Delvare authored
commit ead82d67 upstream. The mapping from OF device IDs to platform device IDs is wrong. TYPE_NCPXXWB473 is 0, TYPE_NCPXXWL333 is 1, so ntc_thermistor_id[TYPE_NCPXXWB473] is { "ncp15wb473", TYPE_NCPXXWB473 } while ntc_thermistor_id[TYPE_NCPXXWL333] is { "ncp18wb473", TYPE_NCPXXWB473 }. So the name is wrong for all but the "ntc,ncp15wb473" entry, and the type is wrong for the "ntc,ncp15wl333" entry. So map the entries by index, it is neither elegant nor robust but at least it is correct. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: 9e8269de hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Signed-off-by:
-
Jean Delvare authored
commit 59cf4243 upstream. In commit 9e8269de, support was added for ntc_thermistor devices being declared in the device tree and implemented on top of IIO. With that change, a dependency was added to the ntc_thermistor driver: depends on (!OF && !IIO) || (OF && IIO) This construct has the drawback that the driver can no longer be selected when OF is set and IIO isn't, nor when IIO is set and OF is not. This is a regression for the original users of the driver. As the new code depends on IIO and is useless without OF, include it only if both are enabled, and set the dependencies accordingly. This is clearer, more simple and more correct. Signed-off-by:
-
Johannes Berg authored
commit e60cbeed upstream. Prior to commit 42661299 ("[media] DocBook: Move all media docbook stuff into its own directory") it was possible to build only a single (or more) book(s) by calling, for example make htmldocs DOCBOOKS=80211.xml This now fails: cp: target `.../Documentation/DocBook//media_api' is not a directory Ignore errors from that copy to make this possible again. Fixes: 42661299 ("[media] DocBook: Move all media docbook stuff into its own directory") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Naoya Horiguchi authored
commit 3e030ecc upstream. When a memory error happens on an in-use page or (free and in-use) hugepage, the victim page is isolated with its refcount set to one. When you try to unpoison it later, unpoison_memory() calls put_page() for it twice in order to bring the page back to free page pool (buddy or free hugepage list). However, if another memory error occurs on the page which we are unpoisoning, memory_failure() returns without releasing the refcount which was incremented in the same call at first, which results in memory leak and unconsistent num_poisoned_pages statistics. This patch fixes it. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Peter Zijlstra authored
commit 46ce0fe9 upstream. When removing a (sibling) event we do: raw_spin_lock_irq(&ctx->lock); perf_group_detach(event); raw_spin_unlock_irq(&ctx->lock); <hole> perf_remove_from_context(event); raw_spin_lock_irq(&ctx->lock); ... raw_spin_unlock_irq(&ctx->lock); Now, assuming the event is a sibling, it will be 'unreachable' for things like ctx_sched_out() because that iterates the groups->siblings, and we just unhooked the sibling. So, if during <hole> we get ctx_sched_out(), it will miss the event and not call event_sched_out() on it, leaving it programmed on the PMU. The subsequent perf_remove_from_context() call will find the ctx is inactive and only call list_del_event() to remove the event from all other lists. Hereafter we can proceed to free the event; while still programmed! Close this hole by moving perf_group_detach() inside the same ctx->lock region(s) perf_remove_from_context() has. The condition on inherited events only in __perf_event_exit_task() is likely complete crap because non-inherited events are part of groups too and we're tearing down just the same. But leave that for another patch. Most-likely-Fixes: e03a9a55 ("perf: Change close() semantics for group events") Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Zijlstra authored
commit 0819b2e3 upstream. Vince reported that using a large sample_period (one with bit 63 set) results in wreckage since while the sample_period is fundamentally unsigned (negative periods don't make sense) the way we implement things very much rely on signed logic. So limit sample_period to 63 bits to avoid tripping over this. Reported-by:
-
Jiri Olsa authored
commit 39af6b16 upstream. The perf cpu offline callback takes down all cpu context events and releases swhash->swevent_hlist. This could race with task context software event being just scheduled on this cpu via perf_swevent_add while cpu hotplug code already cleaned up event's data. The race happens in the gap between the cpu notifier code and the cpu being actually taken down. Note that only cpu ctx events are terminated in the perf cpu hotplug code. It's easily reproduced with: $ perf record -e faults perf bench sched pipe while putting one of the cpus offline: # echo 0 > /sys/devices/system/cpu/cpu1/online Console emits following warning: WARNING: CPU: 1 PID: 2845 at kernel/events/core.c:5672 perf_swevent_add+0x18d/0x1a0() Modules linked in: CPU: 1 PID: 2845 Comm: sched-pipe Tainted: G W 3.14.0+ #256 Hardware name: Intel Corporation Montevina platform/To be filled by O.E.M., BIOS AMVACRB1.86C.0066.B00.0805070703 05/07/2008 0000000000000009 ffff880077233ab8 ffffffff81665a23 0000000000200005 0000000000000000 ffff880077233af8 ffffffff8104732c 0000000000000046 ffff88007467c800 0000000000000002 ffff88007a9cf2a0 0000000000000001 Call Trace: [<ffffffff81665a23>] dump_stack+0x4f/0x7c [<ffffffff8104732c>] warn_slowpath_common+0x8c/0xc0 [<ffffffff8104737a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8110fb3d>] perf_swevent_add+0x18d/0x1a0 [<ffffffff811162ae>] event_sched_in.isra.75+0x9e/0x1f0 [<ffffffff8111646a>] group_sched_in+0x6a/0x1f0 [<ffffffff81083dd5>] ? sched_clock_local+0x25/0xa0 [<ffffffff811167e6>] ctx_sched_in+0x1f6/0x450 [<ffffffff8111757b>] perf_event_sched_in+0x6b/0xa0 [<ffffffff81117a4b>] perf_event_context_sched_in+0x7b/0xc0 [<ffffffff81117ece>] __perf_event_task_sched_in+0x43e/0x460 [<ffffffff81096f1e>] ? put_lock_stats.isra.18+0xe/0x30 [<ffffffff8107b3c8>] finish_task_switch+0xb8/0x100 [<ffffffff8166a7de>] __schedule+0x30e/0xad0 [<ffffffff81172dd2>] ? pipe_read+0x3e2/0x560 [<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70 [<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70 [<ffffffff8166b464>] preempt_schedule_irq+0x44/0x70 [<ffffffff816707f0>] retint_kernel+0x20/0x30 [<ffffffff8109e60a>] ? lockdep_sys_exit+0x1a/0x90 [<ffffffff812a4234>] lockdep_sys_exit_thunk+0x35/0x67 [<ffffffff81679321>] ? sysret_check+0x5/0x56 Fixing this by tracking the cpu hotplug state and displaying the WARN only if current cpu is initialized properly. Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
commit 2d513868 upstream. Russell reported, that irqtime_account_idle_ticks() takes ages due to: for (i = 0; i < ticks; i++) irqtime_account_process_tick(current, 0, rq); It's sad, that this code was written way _AFTER_ the NOHZ idle functionality was available. I charge myself guitly for not paying attention when that crap got merged with commit abb74cef ("sched: Export ns irqtimes through /proc/stat") So instead of looping nr_ticks times just apply the whole thing at once. As a side note: The whole cputime_t vs. u64 business in that context wants to be cleaned up as well. There is no point in having all these back and forth conversions. Lets standardise on u64 nsec for all kernel internal accounting and be done with it. Everything else does not make sense at all for fine grained accounting. Frederic, can you please take care of that? Reported-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 6227cb00 upstream. The check at the beginning of cpupri_find() makes sure that the task_pri variable does not exceed the cp->pri_to_cpu array length. But that length is CPUPRI_NR_PRIORITIES not MAX_RT_PRIO, where it will miss the last two priorities in that array. As task_pri is computed from convert_prio() which should never be bigger than CPUPRI_NR_PRIORITIES, if the check should cause a panic if it is hit. Reported-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
David Woodhouse authored
This is a small excerpt of the upstream commit ea8ea460 (iommu/vt-d: Clean up and fix page table clear/free behaviour). This missing IOTLB flush was added as a minor, inconsequential bug-fix in commit ea8ea460 ("iommu/vt-d: Clean up and fix page table clear/free behaviour") in 3.15. It wasn't originally intended for -stable but a couple of users have reported issues which turn out to be fixed by adding the missing flush. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Will Deacon authored
commit 5f5092e7 upstream. Since we indirect all of our PMU IRQ handling through a dispatcher, it's trivial to hook up perf_sample_event_took to prevent applications such as oprofile from generating interrupt storms due to an unrealisticly low sample period. Reported-by:
Robert Richter <rric@kernel.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Vlastimil Babka authored
commit 49e068f0 upstream. The compaction freepage scanner implementation in isolate_freepages() starts by taking the current cc->free_pfn value as the first pfn. In a for loop, it scans from this first pfn to the end of the pageblock, and then subtracts pageblock_nr_pages from the first pfn to obtain the first pfn for the next for loop iteration. This means that when cc->free_pfn starts at offset X rather than being aligned on pageblock boundary, the scanner will start at offset X in all scanned pageblock, ignoring potentially many free pages. Currently this can happen when a) zone's end pfn is not pageblock aligned, or b) through zone->compact_cached_free_pfn with CONFIG_HOLES_IN_ZONE enabled and a hole spanning the beginning of a pageblock This patch fixes the problem by aligning the initial pfn in isolate_freepages() to pageblock boundary. This also permits replacing the end-of-pageblock alignment within the for loop with a simple pageblock_nr_pages increment. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Heesub Shin <heesub.shin@samsung.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Acked-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunghwan Yun <sunghwan.yun@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vlastimil Babka authored
commit 7ed695e0 upstream. Compaction of a zone is finished when the migrate scanner (which begins at the zone's lowest pfn) meets the free page scanner (which begins at the zone's highest pfn). This is detected in compact_zone() and in the case of direct compaction, the compact_blockskip_flush flag is set so that kswapd later resets the cached scanner pfn's, and a new compaction may again start at the zone's borders. The meeting of the scanners can happen during either scanner's activity. However, it may currently fail to be detected when it occurs in the free page scanner, due to two problems. First, isolate_freepages() keeps free_pfn at the highest block where it isolated pages from, for the purposes of not missing the pages that are returned back to allocator when migration fails. Second, failing to isolate enough free pages due to scanners meeting results in -ENOMEM being returned by migrate_pages(), which makes compact_zone() bail out immediately without calling compact_finished() that would detect scanners meeting. This failure to detect scanners meeting might result in repeated attempts at compaction of a zone that keep starting from the cached pfn's close to the meeting point, and quickly failing through the -ENOMEM path, without the cached pfns being reset, over and over. This has been observed (through additional tracepoints) in the third phase of the mmtests stress-highalloc benchmark, where the allocator runs on an otherwise idle system. The problem was observed in the DMA32 zone, which was used as a fallback to the preferred Normal zone, but on the 4GB system it was actually the largest zone. The problem is even amplified for such fallback zone - the deferred compaction logic, which could (after being fixed by a previous patch) reset the cached scanner pfn's, is only applied to the preferred zone and not for the fallbacks. The problem in the third phase of the benchmark was further amplified by commit 81c0a2bb ("mm: page_alloc: fair zone allocator policy") which resulted in a non-deterministic regression of the allocation success rate from ~85% to ~65%. This occurs in about half of benchmark runs, making bisection problematic. It is unlikely that the commit itself is buggy, but it should put more pressure on the DMA32 zone during phases 1 and 2, which may leave it more fragmented in phase 3 and expose the bugs that this patch fixes. The fix is to make scanners meeting in isolate_freepage() stay that way, and to check in compact_zone() for scanners meeting when migrate_pages() returns -ENOMEM. The result is that compact_finished() also detects scanners meeting and sets the compact_blockskip_flush flag to make kswapd reset the scanner pfn's. The results in stress-highalloc benchmark show that the "regression" by commit 81c0a2bb in phase 3 no longer occurs, and phase 1 and 2 allocation success rates are also significantly improved. Signed-off-by:
-
Vlastimil Babka authored
commit d3132e4b upstream. Compaction caches pfn's for its migrate and free scanners to avoid scanning the whole zone each time. In compact_zone(), the cached values are read to set up initial values for the scanners. There are several situations when these cached pfn's are reset to the first and last pfn of the zone, respectively. One of these situations is when a compaction has been deferred for a zone and is now being restarted during a direct compaction, which is also done in compact_zone(). However, compact_zone() currently reads the cached pfn's *before* resetting them. This means the reset doesn't affect the compaction that performs it, and with good chance also subsequent compactions, as update_pageblock_skip() is likely to be called and update the cached pfn's to those being processed. Another chance for a successful reset is when a direct compaction detects that migration and free scanners meet (which has its own problems addressed by another patch) and sets update_pageblock_skip flag which kswapd uses to do the reset because it goes to sleep. This is clearly a bug that results in non-deterministic behavior, so this patch moves the cached pfn reset to be performed *before* the values are read. Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
-
Nicholas Bellinger authored
commit 0ed6e189 upstream. This patch fixes a NULL pointer dereference regression bug that was introduced with: commit 1e1110c4 Author: Mikulas Patocka <mpatocka@redhat.com> Date: Sat May 17 06:49:22 2014 -0400 target: fix memory leak on XCOPY Now that target_put_sess_cmd() -> kref_put_spinlock_irqsave() is called with a valid se_cmd->cmd_kref, a NULL pointer dereference is triggered because the XCOPY passthrough commands don't have an associated se_session pointer. To address this bug, go ahead and checking for a NULL se_sess pointer within target_put_sess_cmd(), and call se_cmd->se_tfo->release_cmd() to release the XCOPY's xcopy_pt_cmd memory. Reported-by:
Thomas Glanzmann <thomas@glanzmann.de> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # 3.12+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Justin Maggard authored
commit c41570c9 upstream. When defragging a very large file, the cluster variable can wrap its 32-bit signed int type and become negative, which eventually gets passed to btrfs_force_ra() as a very large unsigned long value. On 32-bit platforms, this eventually results in an Oops from the SLAB allocator. Change the cluster and max_cluster signed int variables to unsigned long to match the readahead functions. This also allows the min() comparison in btrfs_defrag_file() to work as intended. Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
- 18 Jun, 2014 3 commits
-
-
Markos Chandras authored
commit 137f7df8 upstream. Add _TIF_SECCOMP flag to _TIF_WORK_SYSCALL_ENTRY to indicate that the system call needs to be checked against a seccomp filter. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6405/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Denis Turischev authored
commit 0a939993 upstream. Patch "xhci: Switch Intel Lynx Point ports to EHCI on shutdown." commit c09ec25d is not fully correct It switches both Lynx Point and Lynx Point-LP ports to EHCI on shutdown. On some Lynx Point machines it causes spurious interrupt, which wake the system: bugzilla.kernel.org/show_bug.cgi?id=76291 On Lynx Point-LP on the contrary switching ports to EHCI seems to be necessary to fix these spurious interrupts. Signed-off-by:
Denis Turischev <denis@compulab.co.il> Reported-by:
Wulf Richartz <wulf.richartz@gmail.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Jiri Kosina authored
commit 6314a108 upstream. Commit 41a55b4d ("floppy: silence warning during disk test") caused bio.bi_flags being overwritten, and its initialization to BIO_UPTODATE in bio_init() to be lost. This was unnoticed until 7b7b68bb ("floppy: bail out in open() if drive is not responding to block0 read"), because the error value wasn't checked for in the bio completion callback. Now we are actually looking at the error, and the loss of BIO_UPTODATE causes EIO to be wrongly passed to the callback, which confuses the FD_OPEN_SHOULD_FAIL_BIT logic. Fix this by not destroying previous value of bi_flags when setting BIO_QUIET. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
