- 10 Nov, 2022 2 commits
-
-
Zhengchao Shao authored
When failed to bind qsets in cxgb_up() for opening device, napi isn't disabled. When open cxgb3 device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only. Fixes: 48c4b6db ("cxgb3 - fix port up/down error path") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109021451.121490-1-shaozhengchao@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Zhengchao Shao authored
When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for opening device, napi isn't disabled. When open cpsw device next time, it will report a invalid opcode issue. Compiled tested only. Fixes: d354eb85 ("drivers: net: cpsw: dual_emac: simplify napi usage") Signed-off-by:
-
- 09 Nov, 2022 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Fix deadlock in nfnetlink due to missing mutex release in error path, from Ziyang Xuan. 2) Clean up pending autoload module list from nf_tables_exit_net() path, from Shigeru Yoshida. 3) Fixes for the netfilter's reverse path selftest, from Phil Sutter. All of these bugs have been around for several releases. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
M Chetan Kumar says: ==================== net: wwan: iosm: fixes This patch series contains iosm fixes. PATCH1: Fix memory leak in ipc_pcie_read_bios_cfg. PATCH2: Fix driver not working with INTEL_IOMMU disabled config. PATCH3: Fix invalid mux header type. PATCH4: Fix kernel build robot reported errors. Please refer to individual commit message for details. -- v2: * PATCH1: No Change * PATCH2: Kconfig change - Add dependency on PCI to resolve kernel build robot errors. * PATCH3: No Change * PATCH4: New (Fix kernel build robot errors) ==================== Signed-off-by: -
M Chetan Kumar authored
Include linux/vmalloc.h in iosm_ipc_coredump.c & iosm_ipc_devlink.c to resolve kernel test robot errors. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
-
M Chetan Kumar authored
Data stall seen during peak DL throughput test & packets are dropped by mux layer due to invalid header type in datagram. During initlization Mux aggregration protocol is set to default UL/DL size and TD count of Mux lite protocol. This configuration mismatch between device and driver is resulting in data stall/packet drops. Override the UL/DL size and TD count for Mux aggregation protocol. Fixes: 1f52d7b6 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by:
-
M Chetan Kumar authored
With INTEL_IOMMU disable config or by forcing intel_iommu=off from grub some of the features of IOSM driver like browsing, flashing & coredump collection is not working. When driver calls DMA API - dma_map_single() for tx transfers. It is resulting in dma mapping error. Set the device DMA addressing capabilities using dma_set_mask() and remove the INTEL_IOMMU dependency in kconfig so that driver follows the platform config either INTEL_IOMMU enable or disable. Fixes: f7af616c ("net: iosm: infrastructure") Signed-off-by:
-
M Chetan Kumar authored
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed. Free the acpi_object after use. Fixes: 7e98d785 ("net: iosm: entry point") Signed-off-by:
-
Phil Sutter authored
Address a few problems with the initial test script version: * On systems with ip6tables but no ip6tables-legacy, testing for ip6tables was disabled by accident. * Firewall setup phase did not respect possibly unavailable tools. * Consistently call nft via '$nft'. Fixes: 6e31ce83 ("selftests: netfilter: Test reverse path filtering") Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Nick Child authored
Previously, the default number of transmit queues was 16. Due to resource concerns, set to 8 queues instead. Still allow the user to set more queues (max 16) if they like. Since the driver is virtualized away from the physical NIC, the purpose of multiple queues is purely to allow for parallel calls to the hypervisor. Therefore, there is no noticeable effect on performance by reducing queue count to 8. Fixes: d926793c ("ibmveth: Implement multi queue on xmit") Reported-by:
Dave Taht <dave.taht@gmail.com> Signed-off-by:
Nick Child <nnac123@linux.ibm.com> Link: https://lore.kernel.org/r/20221107203215.58206-1-nnac123@linux.ibm.comSigned-off-by:
-
Zhengchao Shao authored
When failed to enable interrupts in nixge_open() for opening device, napi isn't disabled. When open nixge device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested. Fixes: 492caffa ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by:
-
Eric Dumazet authored
A recent patch exposed another issue in napi_get_frags() caught by syzbot [1] Before feeding packets to GRO, and calling napi_complete() we must first grab NAPI_STATE_SCHED. [1] WARNING: CPU: 0 PID: 3612 at net/core/dev.c:6076 napi_complete_done+0x45b/0x880 net/core/dev.c:6076 Modules linked in: CPU: 0 PID: 3612 Comm: syz-executor408 Not tainted 6.1.0-rc3-syzkaller-00175-g1118b204 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:napi_complete_done+0x45b/0x880 net/core/dev.c:6076 Code: c1 ea 03 0f b6 14 02 4c 89 f0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 24 04 00 00 41 89 5d 1c e9 73 fc ff ff e8 b5 53 22 fa <0f> 0b e9 82 fe ff ff e8 a9 53 22 fa 48 8b 5c 24 08 31 ff 48 89 de RSP: 0018:ffffc90003c4f920 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000030 RCX: 0000000000000000 RDX: ffff8880251c0000 RSI: ffffffff875a58db RDI: 0000000000000007 RBP: 0000000000000001 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888072d02628 R13: ffff888072d02618 R14: ffff888072d02634 R15: 0000000000000000 FS: 0000555555f13300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c44d3892b8 CR3: 00000000172d2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> napi_complete include/linux/netdevice.h:510 [inline] tun_get_user+0x206d/0x3a60 drivers/net/tun.c:1980 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:2191 [inline] do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735 do_iter_write+0x182/0x700 fs/read_write.c:861 vfs_writev+0x1aa/0x630 fs/read_write.c:934 do_writev+0x133/0x2f0 fs/read_write.c:977 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f37021a3c19 Fixes: 1118b204 ("net: tun: Fix memory leaks of napi_get_frags") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Wang Yufen <wangyufen@huawei.com> Link: https://lore.kernel.org/r/20221107180011.188437-1-edumazet@google.comSigned-off-by:
-
Zhengchao Shao authored
When prestera_sdma_switch_init() failed, the memory pointed to by sw->rxtx isn't released. Fix it. Only be compiled, not be tested. Fixes: 501ef306 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by:
Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20221108025607.338450-1-shaozhengchao@huawei.comSigned-off-by:
-
- 08 Nov, 2022 15 commits
-
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.1-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== can 2022-11-07 The first patch is by Chen Zhongjin and adds a missing dev_remove_pack() to the AF_CAN protocol. Zhengchao Shao's patch fixes a potential NULL pointer deref in AF_CAN's can_rx_register(). The next patch is by Oliver Hartkopp and targets the CAN ISO-TP protocol, and fixes the state handling for echo TX processing. Oliver Hartkopp's patch for the j1939 protocol adds a missing initialization of the CAN headers inside outgoing skbs. Another patch by Oliver Hartkopp fixes an out of bounds read in the check for invalid CAN frames in the xmit callback of virtual CAN devices. This touches all non virtual device drivers as we decided to rename the function requiring that netdev_priv points to a struct can_priv. (Note: This patch will create a merge conflict with net-next where the pch_can driver has removed.) The last patch is by Geert Uytterhoeven and adds the missing ECC error checks for the channels 2-7 in the rcar_canfd driver. * tag 'linux-can-fixes-for-6.1-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: rcar_canfd: Add missing ECC error checks for channels 2-7 can: dev: fix skb drop check can: j1939: j1939_send_one(): fix missing CAN header initialization can: isotp: fix tx state handling for echo tx processing can: af_can: fix NULL pointer dereference in can_rx_register() can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet ==================== Link: https://lore.kernel.org/r/20221107133217.59861-1-mkl@pengutronix.deSigned-off-by:
-
Shigeru Yoshida authored
syzbot reported a warning like below [1]: WARNING: CPU: 3 PID: 9 at net/netfilter/nf_tables_api.c:10096 nf_tables_exit_net+0x71c/0x840 Modules linked in: CPU: 2 PID: 9 Comm: kworker/u8:0 Tainted: G W 6.1.0-rc3-00072-g8e5423e9 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:nf_tables_exit_net+0x71c/0x840 ... Call Trace: <TASK> ? __nft_release_table+0xfc0/0xfc0 ops_exit_list+0xb5/0x180 cleanup_net+0x506/0xb10 ? unregister_pernet_device+0x80/0x80 process_one_work+0xa38/0x1730 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 ? rwlock_bug.part.0+0x90/0x90 ? _raw_spin_lock_irq+0x46/0x50 worker_thread+0x67e/0x10e0 ? process_one_work+0x1730/0x1730 kthread+0x2e5/0x3a0 ? kthread_complete_and_exit+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK> In nf_tables_exit_net(), there is a case where nft_net->commit_list is empty but nft_net->module_list is not empty. Such a case occurs with the following scenario: 1. nfnetlink_rcv_batch() is called 2. nf_tables_newset() returns -EAGAIN and NFNL_BATCH_FAILURE bit is set to status 3. nf_tables_abort() is called with NFNL_ABORT_AUTOLOAD (nft_net->commit_list is released, but nft_net->module_list is not because of NFNL_ABORT_AUTOLOAD flag) 4. Jump to replay label 5. netlink_skb_clone() fails and returns from the function (this is caused by fault injection in the reproducer of syzbot) This patch fixes this issue by calling __nf_tables_abort() when nft_net->module_list is not empty in nf_tables_exit_net(). Fixes: eb014de4 ("netfilter: nf_tables: autoload modules from the abort path") Link: https://syzkaller.appspot.com/bug?id=802aba2422de4218ad0c01b46c9525cc9d4e4aa3 [1] Reported-by: syzbot+178efee9e2d7f87f5103@syzkaller.appspotmail.com Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de>
-
Ziyang Xuan authored
When type is NFNL_CB_MUTEX and -EAGAIN error occur in nfnetlink_rcv_msg(), it does not execute nfnl_unlock(). That would trigger potential dead lock. Fixes: 50f2db9e ("netfilter: nfnetlink: consolidate callback types") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
-
Zhengchao Shao authored
When failed to register irq in xgene_enet_open() for opening device, napi isn't disabled. When open xgene device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested. Fixes: aeb20b6b ("drivers: net: xgene: fix: ifconfig up/down crash") Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Ratheesh Kannoth authored
Current way of checking available SQE count which is based on HW updated SQB count could result in driver submitting an SQE even before CQE for the previously transmitted SQE at the same index is processed in NAPI resulting losing SKB pointers, hence a leak. Fix this by checking a consumer index which is updated once CQE is processed. Fixes: 3ca6c4c8 ("octeontx2-pf: Add packet transmission support") Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20221107033505.2491464-1-rkannoth@marvell.comSigned-off-by:
-
Zhengchao Shao authored
When failed to connect to and start PHY in mtk_star_enable() for opening device, napi isn't disabled. When open mtk star device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested. Fixes: 8c7bd5a4 ("net: ethernet: mtk-star-emac: new driver") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221107012159.211387-1-shaozhengchao@huawei.comSigned-off-by:
-
Zhengchao Shao authored
If lapb_register() failed when lapb device goes to up for the first time, the NAPI is not disabled. As a result, the invalid opcode issue is reported when the lapb device goes to up for the second time. The stack info is as follows: [ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442! [ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0 [ 1958.332310][T11356] Call Trace: [ 1958.332817][T11356] <TASK> [ 1958.336135][T11356] lapbeth_open+0x18/0x90 [ 1958.337446][T11356] __dev_open+0x258/0x490 [ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0 [ 1958.345325][T11356] dev_change_flags+0x93/0x160 [ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0 [ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0 [ 1958.349638][T11356] sock_ioctl+0x5d1/0x750 [ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790 [ 1958.365594][T11356] do_syscall_64+0x35/0x80 [ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1958.377381][T11356] </TASK> Fixes: 514e1150 ("net: x25: Queue received packets in the drivers instead of per-CPU queues") Signed-off-by:
-
Jakub Kicinski authored
Xin Long says: ==================== sctp: fix a NULL pointer dereference in sctp_sched_dequeue_common This issue was triggered with SCTP_PR_SCTP_PRIO in sctp, and caused by not checking and fixing stream->out_curr after removing a chunk from this stream. Patch 1 removes an unnecessary check and makes the real fix easier to add in Patch 2. ==================== Link: https://lore.kernel.org/r/cover.1667598261.git.lucien.xin@gmail.comSigned-off-by:
-
Xin Long authored
A crash was reported by Zhen Chen: list_del corruption, ffffa035ddf01c18->next is NULL WARNING: CPU: 1 PID: 250682 at lib/list_debug.c:49 __list_del_entry_valid+0x59/0xe0 RIP: 0010:__list_del_entry_valid+0x59/0xe0 Call Trace: sctp_sched_dequeue_common+0x17/0x70 [sctp] sctp_sched_fcfs_dequeue+0x37/0x50 [sctp] sctp_outq_flush_data+0x85/0x360 [sctp] sctp_outq_uncork+0x77/0xa0 [sctp] sctp_cmd_interpreter.constprop.0+0x164/0x1450 [sctp] sctp_side_effects+0x37/0xe0 [sctp] sctp_do_sm+0xd0/0x230 [sctp] sctp_primitive_SEND+0x2f/0x40 [sctp] sctp_sendmsg_to_asoc+0x3fa/0x5c0 [sctp] sctp_sendmsg+0x3d5/0x440 [sctp] sock_sendmsg+0x5b/0x70 and in sctp_sched_fcfs_dequeue() it dequeued a chunk from stream out_curr outq while this outq was empty. Normally stream->out_curr must be set to NULL once all frag chunks of current msg are dequeued, as we can see in sctp_sched_dequeue_done(). However, in sctp_prsctp_prune_unsent() as it is not a proper dequeue, sctp_sched_dequeue_done() is not called to do this. This patch is to fix it by simply setting out_curr to NULL when the last frag chunk of current msg is dequeued from out_curr stream in sctp_prsctp_prune_unsent(). Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Reported-by:
Zhen Chen <chenzhen126@huawei.com> Tested-by:
Caowangbao <caowangbao@huawei.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
Since commit 5bbbbe32 ("sctp: introduce stream scheduler foundations"), sctp_stream_outq_migrate() has been called in sctp_stream_init/update to removes those chunks to streams higher than the new max. There is no longer need to do such check in sctp_prsctp_prune_unsent(). Signed-off-by:
-
Xin Long authored
This is a follow-up for commit 974cb0e3 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump") where it should have type casted sizeof(..) to int to work when TLV_GET_DATA_LEN() returns a negative value. syzbot reported a call trace because of it: BUG: KMSAN: uninit-value in ... tipc_nl_compat_name_table_dump+0x841/0xea0 net/tipc/netlink_compat.c:934 __tipc_nl_compat_dumpit+0xab2/0x1320 net/tipc/netlink_compat.c:238 tipc_nl_compat_dumpit+0x991/0xb50 net/tipc/netlink_compat.c:321 tipc_nl_compat_recv+0xb6e/0x1640 net/tipc/netlink_compat.c:1324 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x103f/0x1260 net/netlink/genetlink.c:792 netlink_rcv_skb+0x3a5/0x6c0 net/netlink/af_netlink.c:2501 genl_rcv+0x3c/0x50 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] Reported-by: syzbot+e5dbaaa238680ce206ea@syzkaller.appspotmail.com Fixes: 974cb0e3 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump") Signed-off-by:
-
YueHaibing authored
While BCMGENET select BROADCOM_PHY as y, but PTP_1588_CLOCK_OPTIONAL is m, kconfig warning and build errors: WARNING: unmet direct dependencies detected for BROADCOM_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - BCMGENET [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && HAS_IOMEM [=y] && ARCH_BCM2835 [=y] drivers/net/phy/broadcom.o: In function `bcm54xx_suspend': broadcom.c:(.text+0x6ac): undefined reference to `bcm_ptp_stop' drivers/net/phy/broadcom.o: In function `bcm54xx_phy_probe': broadcom.c:(.text+0x784): undefined reference to `bcm_ptp_probe' drivers/net/phy/broadcom.o: In function `bcm54xx_config_init': broadcom.c:(.text+0xd4c): undefined reference to `bcm_ptp_config_init' Fixes: 99addbe3 ("net: broadcom: Select BROADCOM_PHY for BCMGENET") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Florian Fainelli <f.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20221105090245.8508-1-yuehaibing@huawei.comSigned-off-by:
-
Yang Yingliang authored
If CONFIG_MACSEC=m and CONFIG_OCTEONTX2_PF=y, it leads a build error: ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_pfaf_mbox_up_handler': otx2_pf.c:(.text+0x181c): undefined reference to `cn10k_handle_mcs_event' ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_probe': otx2_pf.c:(.text+0x437e): undefined reference to `cn10k_mcs_init' ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_remove': otx2_pf.c:(.text+0x5031): undefined reference to `cn10k_mcs_free' ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_mbox_up_handler_mcs_intr_notify': otx2_pf.c:(.text+0x5f11): undefined reference to `cn10k_handle_mcs_event' Make CONFIG_OCTEONTX2_PF depends on CONFIG_MACSEC to fix it. Because it has empty stub functions of cn10k, CONFIG_OCTEONTX2_PF can be enabled if CONFIG_MACSEC is disabled Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221105063442.2013981-1-yangyingliang@huawei.comSigned-off-by:
-
Miquel Raynal authored
While working on the nvmem description I figured out this file had the "nvmem-cell-names" property name misspelled. Fix the typo, as "nvmem-cells-names" has never existed. Fixes: 603094b2 ("dt-bindings: net: Add tsnep Ethernet controller") Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221104162147.1288230-1-miquel.raynal@bootlin.comSigned-off-by:
-
Rasmus Villemoes authored
There are two problems with meson8b_devm_clk_prepare_enable(), introduced in commit a54dc4a4 ("net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable"): - It doesn't pass the clk argument, but instead always the rgmii_tx_clk of the device. - It silently ignores the return value of devm_add_action_or_reset(). The former didn't become an actual bug until another user showed up in the next commit 9308c476 ("net: stmmac: dwmac-meson8b: add support for the RX delay configuration"). The latter means the callers could end up with the clock not actually prepared/enabled. Fixes: a54dc4a4 ("net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable") Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20221104083004.2212520-1-linux@rasmusvillemoes.dkSigned-off-by:
-
- 07 Nov, 2022 12 commits
-
-
Geert Uytterhoeven authored
When introducing support for R-Car V3U, which has 8 instead of 2 channels, the ECC error bitmask was extended to take into account the extra channels, but rcar_canfd_global_error() was not updated to act upon the extra bits. Replace the RCANFD_GERFL_EEF[01] macros by a new macro that takes the channel number, fixing R-Car V3U while simplifying the code. Fixes: 45721c40 ("can: rcar_canfd: Add support for r8a779a0 SoC") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/all/4edb2ea46cc64d0532a08a924179827481e14b4f.1666951503.git.geert+renesas@glider.be Cc: stable@vger.kernel.org Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Oliver Hartkopp authored
In commit a6d190f8 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. Fixes: a6d190f8 ("can: skb: drop tx skb if in listen only mode") Reported-by:
Dariusz Stojaczyk <Dariusz.Stojaczyk@opensynergy.com> Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Cc: Max Staudt <max@enpas.org> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Acked-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org # 6.0.x [mkl: patch pch_can, too] Signed-off-by:
-
Oliver Hartkopp authored
The read access to struct canxl_frame::len inside of a j1939 created skbuff revealed a missing initialization of reserved and later filled elements in struct can_frame. This patch initializes the 8 byte CAN header with zero. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Cc: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/linux-can/20221104052235.GA6474@pengutronix.de Reported-by: syzbot+d168ec0caca4697e03b1@syzkaller.appspotmail.com Signed-off-by:
-
Oliver Hartkopp authored
In commit 4b7fe92c ("can: isotp: add local echo tx processing for consecutive frames") the data flow for consecutive frames (CF) has been reworked to improve the reliability of long data transfers. This rework did not touch the transmission and the tx state changes of single frame (SF) transfers which likely led to the WARN in the isotp_tx_timer_handler() catching a wrong tx state. This patch makes use of the improved frame processing for SF frames and sets the ISOTP_SENDING state in isotp_sendmsg() within the cmpxchg() condition handling. A review of the state machine and the timer handling additionally revealed a missing echo timeout handling in the case of the burst mode in isotp_rcv_echo() and removes a potential timer configuration uncertainty in isotp_rcv_fc() when the receiver requests consecutive frames. Fixes: 4b7fe92c ("can: isotp: add local echo tx processing for consecutive frames") Link: https://lore.kernel.org/linux-can/CAO4mrfe3dG7cMP1V5FLUkw7s+50c9vichigUMQwsxX4M=45QEw@mail.gmail.com/T/#uReported-by:
Wei Chen <harperchen1110@gmail.com> Cc: stable@vger.kernel.org # v6.0 Signed-off-by:
-
Zhengchao Shao authored
It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Fixes: 4e096a18 ("net: introduce CAN specific pointer in the struct net_device") Signed-off-by: -
Chen Zhongjin authored
In can_init(), dev_add_pack(&canxl_packet) is added but not removed in can_exit(). It breaks the packet handler list and can make kernel panic when can_init() is called for the second time. | > modprobe can && rmmod can | > rmmod xxx && modprobe can | | BUG: unable to handle page fault for address: fffffbfff807d7f4 | RIP: 0010:dev_add_pack+0x133/0x1f0 | Call Trace: | <TASK> | can_init+0xaa/0x1000 [can] | do_one_initcall+0xd3/0x4e0 | ... Fixes: fb08cba1 ("can: canxl: update CAN infrastructure for CAN XL frames") Signed-off-by:
Chen Zhongjin <chenzhongjin@huawei.com> Acked-by:
-
Alexander Potapenko authored
When copying a `struct ifaddrlblmsg` to the network, __ifal_reserved remained uninitialized, resulting in a 1-byte infoleak: BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841 __netdev_start_xmit ./include/linux/netdevice.h:4841 netdev_start_xmit ./include/linux/netdevice.h:4857 xmit_one net/core/dev.c:3590 dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606 __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256 dev_queue_xmit ./include/linux/netdevice.h:3009 __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1263 netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272 netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360 nlmsg_unicast ./include/net/netlink.h:1061 rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758 ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 ... Uninit was created at: slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742 slab_alloc_node mm/slub.c:3398 __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437 __do_kmalloc_node mm/slab_common.c:954 __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975 kmalloc_reserve net/core/skbuff.c:437 __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509 alloc_skb ./include/linux/skbuff.h:1267 nlmsg_new ./include/net/netlink.h:964 ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540 rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921 ... This patch ensures that the reserved field is always initialized. Reported-by: syzbot+3553517af6020c4f2813f1003fe76ef3cbffe98d@syzkaller.appspotmail.com Fixes: 2a8cc6c8 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by:
Alexander Potapenko <glider@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Lu Wei authored
If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code of TCPOPT_SACK_PERM is called to enable sack after data is sent and dupacks are received , it will trigger a warning in function tcp_verify_left_out() as follows: ============================================ WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132 tcp_timeout_mark_lost+0x154/0x160 tcp_enter_loss+0x2b/0x290 tcp_retransmit_timer+0x50b/0x640 tcp_write_timer_handler+0x1c8/0x340 tcp_write_timer+0xe5/0x140 call_timer_fn+0x3a/0x1b0 __run_timers.part.0+0x1bf/0x2d0 run_timer_softirq+0x43/0xb0 __do_softirq+0xfd/0x373 __irq_exit_rcu+0xf6/0x140 The warning is caused in the following steps: 1. a socket named socketA is created 2. socketA enters repair mode without build a connection 3. socketA calls connect() and its state is changed to TCP_ESTABLISHED directly 4. socketA leaves repair mode 5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup ack receives) increase 6. socketA enters repair mode again 7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack 8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out increases 9. sack_outs + lost_out > packets_out triggers since lost_out and sack_outs increase repeatly In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if Step7 not happen and the warning will not be triggered. As suggested by Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was already sent. socket-tcp tests in CRIU has been tested as follows: $ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp* --keep-going \ --ignore-taint socket-tcp* represent all socket-tcp tests in test/zdtm/static/. Fixes: b139ba4e ("tcp: Repair connection-time negotiated parameters") Signed-off-by:Lu Wei <luwei32@huawei.com> Reviewed-by:
-
Zhaoping Shu authored
These WWAN network interface operations (create/delete/open/close) are already protected by RTNL lock, i.e., wwan_ops.newlink(), wwan_ops.dellink(), net_device_ops.ndo_open() and net_device.ndo_stop() are called with RTNL lock held. Therefore, this patch removes the unnecessary if_mutex. Signed-off-by:
Zhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by:
-
HW He authored
MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice(). Fixes: aa730a99 ("net: wwan: Add MHI MBIM network driver") Signed-off-by:
HW He <hw.he@mediatek.com> Signed-off-by:
-
HW He authored
IOSM driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice(). Fixes: 2a54f2c7 ("net: iosm: net driver") Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Zhengchao Shao authored
When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, bpq_device_event() receives the message and creates a new bpq device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, bpq_device_event() will not put the dev reference count. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
