- 02 Jun, 2015 35 commits
-
-
Daniel Pieczko authored
Firmware does not support a periodic DMA of vadaptor-stats on VFs, so only update the stats buffer when stats are requested (when running "ethtool -S" or an ip/ifconfig command that reports stats). Signed-off-by:
Shradha Shah <sshah@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Pieczko authored
All interfaces will display vadaptor statistics, so set all the relevant bits in the stats bitmask. Only functions with the LINKCTRL flag will see other stats, including (per-port) MAC stats. The vadaptor stats are from rx_unicast to tx_overflow. Signed-off-by:
-
Daniel Pieczko authored
The port-id must be known so that the RMON level can be set for the collection of vadapter stats. Signed-off-by:
-
Daniel Pieczko authored
The MAC stats are per-port and will only be displayed on the PF with control of the link (one per physical port). Vadapter stats will also be displayed for this PF, so distinguish the MAC stats by adding a prefix of "port_". Signed-off-by:
-
Shradha Shah authored
Signed-off-by:
-
Shradha Shah authored
On every adapter there will be one primary PF per adaptor and one link control PF per port. Signed-off-by:
-
Shradha Shah authored
This change is a stylistic change and does not affect functionality. Signed-off-by:
-
Shradha Shah authored
In the case where we have multiple functions (PFs and VFs), this sysfs entry is useful to identify the physical port corresponding to the function we are interested in. Signed-off-by:
-
David S. Miller authored
Aleksey Makarov says: ==================== net: thunderx: fix problems reported by static check tools These are fixes for the problems that were reported by static check tools. ==================== Signed-off-by: -
Aleksey Makarov authored
GFP_KERNEL should be used in the thread context Signed-off-by:
Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by:
-
Aleksey Makarov authored
This fixes a coccinelle warning: coccinelle warnings: (new ones prefixed by >>) >> drivers/net/ethernet/cavium/thunder/nicvf_queues.c:360:1-11: alloc >> with no test, possible model on line 367 vim +360 drivers/net/ethernet/cavium/thunder/nicvf_queues.c 354 err = nicvf_alloc_q_desc_mem(nic, &sq->dmem, q_len, SND_QUEUE_DESC_SIZE, 355 NICVF_SQ_BASE_ALIGN_BYTES); 356 if (err) 357 return err; 358 359 sq->desc = sq->dmem.base; > 360 sq->skbuff = kcalloc(q_len, sizeof(u64), GFP_ATOMIC); 361 sq->head = 0; 362 sq->tail = 0; 363 atomic_set(&sq->free_cnt, q_len - 1); 364 sq->thresh = SND_QUEUE_THRESH; 365 366 /* Preallocate memory for TSO segment's header */ > 367 sq->tso_hdrs = dma_alloc_coherent(&nic->pdev->dev, 368 q_len * TSO_HEADER_SIZE, 369 &sq->tso_hdrs_phys, GFP_KERNEL); 370 if (!sq->tso_hdrs) Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Aleksey Makarov authored
No need to cast void* to u8*: pointer arithmetics works same way for both. Signed-off-by:
-
Aleksey Makarov authored
This fixes a copypaste bug that was discovered by a static analysis tool: The patch 4863dea3: "net: Adding support for Cavium ThunderX network controller" from May 26, 2015, leads to the following static checker warning: drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c:517 nicvf_set_rxfh() warn: we tested 'hkey' before and it was 'false' drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c 506 /* We do not allow change in unsupported parameters */ 507 if (hkey || ^^^^ We return here. 508 (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP)) 509 return -EOPNOTSUPP; 510 511 rss->enable = true; 512 if (indir) { 513 for (idx = 0; idx < rss->rss_size; idx++) 514 rss->ind_tbl[idx] = indir[idx]; 515 } 516 517 if (hkey) { ^^^^ So this is dead code. 518 memcpy(rss->key, hkey, RSS_HASH_KEY_SIZE * sizeof(u64)); 519 nicvf_set_rss_key(nic); 520 } 521 522 nicvf_config_rss(nic); 523 return 0; 524 } regards, dan carpenter Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Aleksey Makarov authored
This fixes sparse messages like this: drivers/net/ethernet/cavium/thunder/nicvf_main.c:1141:26: sparse: symbol 'nicvf_get_stats64' was not declared. Should it be static? Also remove unused declarations Reported-by:
-
Aleksey Makarov authored
They were left from development stage Reported-by:
-
Aleksey Makarov authored
This fixes sparse message: drivers/net/ethernet/cavium/thunder/nicvf_main.c:385:40: sparse: cast to restricted __le64 Reported-by:
-
Aleksey Makarov authored
This fixes sparse message: drivers/net/ethernet/cavium/thunder/nicvf_main.c:153:25: sparse: cast to restricted __le64 Reported-by:
-
Aleksey Makarov authored
This fixes sparse messages like this: drivers/net/ethernet/cavium/thunder/thunder_bgx.c:897:24: sparse: constant 0x300000000000 is so big it is long Reported-by:
-
Robert Richter authored
There are duplicate NODE_ID macro definitions. Move all of them to nic.h for usage in nic and bgx driver and introduce nic_get_node_id() helper function. This patch also fixes 64bit mask which should have been ULL by reworking the node calculation. Signed-off-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/phy/amd-xgbe-phy.c drivers/net/wireless/iwlwifi/Kconfig include/net/mac80211.h iwlwifi/Kconfig and mac80211.h were both trivial overlapping changes. The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and the bug fix that happened on the 'net' side is already integrated into the rest of the amd-xgbe driver. Signed-off-by: -
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4/cxgb4vf: Adds support for Chelsio T6 adapter This patch series adds the following: Adds NIC driver support for T6 adapter Adds vNIC driver support for T6 adapter This patch series has been created against net-next tree and includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. Thanks V2: Fixed compilation issue, when CHELSIO_T4_FCOE is set ==================== Signed-off-by: -
Hariprasad Shenai authored
Adds vnic driver register related changes for T6 adapter Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Adds NIC driver related changes for T6 adapter. Register related changes, MC related changes, VF related changes, doorbell related changes, debugfs changes, etc Signed-off-by:
-
Hariprasad Shenai authored
Adds new macro is_t6 and adds the register address range for T6 adapter Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various VTI tunnel (mark handling, PMTU) bug fixes from Alexander Duyck and Steffen Klassert. 2) Revert ethtool PHY query change, it wasn't correct. The PHY address selected by the driver running the PHY to MAC connection decides what PHY address GET ethtool operations return information from. 3) Fix handling of sequence number bits for encryption IV generation in ESP driver, from Herbert Xu. 4) UDP can return -EAGAIN when we hit a bad checksum on receive, even when there are other packets in the receive queue which is wrong. Just respect the error returned from the generic socket recv datagram helper. From Eric Dumazet. 5) Fix BNA driver firmware loading on big-endian systems, from Ivan Vecera. 6) Fix regression in that we were inheriting the congestion control of the listening socket for new connections, the intended behavior always was to use the default in this case. From Neal Cardwell. 7) Fix NULL deref in brcmfmac driver, from Arend van Spriel. 8) OTP parsing fix in iwlwifi from Liad Kaufman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) vti6: Add pmtu handling to vti6_xmit. Revert "net: core: 'ethtool' issue with querying phy settings" bnx2x: Move statistics implementation into semaphores xen: netback: read hotplug script once at start of day. xen: netback: fix printf format string warning Revert "netfilter: ensure number of counters is >0 in do_replace()" net: dsa: Properly propagate errors from dsa_switch_setup_one tcp: fix child sockets to use system default congestion control if not set udp: fix behavior of wrong checksums sfc: free multiple Rx buffers when required bna: fix soft lock-up during firmware initialization failure bna: remove unreasonable iocpf timer start bna: fix firmware loading on big-endian machines bridge: fix br_multicast_query_expired() bug via-rhine: Resigning as maintainer brcmfmac: avoid null pointer access when brcmf_msgbuf_get_pktid() fails mac80211: Fix mac80211.h docbook comments iwlwifi: nvm: fix otp parsing in 8000 hw family iwlwifi: pcie: fix tracking of cmd_in_flight ip_vti/ip6_vti: Preserve skb->mark after rcv_cb call ... -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull Sparc fixes from David Miller: 1) Setup the core/threads/sockets bitmaps correctly so that 'lscpus' and friends operate properly. Frtom Chris Hyser. 2) The bit that normally means "Cached Virtually" on sun4v systems, actually changes meaning in M7 and later chips. Fix from Khalid Aziz. 3) One some PCI-E systems we need to probe different OF properties to fill in the PCI slot information properly, from Eric Snowberg. 4) Kill an extraneous memset after kzalloc(), from Christophe Jaillet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Resolve conflict between sparc v9 and M7 on usage of bit 9 of TTE sparc64: pci slots information is not populated in sysfs sparc: kernel: GRPCI2: Remove a useless memset sparc64: Setup sysfs to mark LDOM sockets, cores and threads correctly -
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fix from Michael Tsirkin: "Last-minute virtio fix for 4.1 This tweaks an exported user-space header to fix build breakage for userspace using it" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: include/uapi/linux/virtio_balloon.h: include linux/virtio_types.h
-
John W. Linville authored
Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
John W. Linville authored
Signed-off-by:
-
David S. Miller authored
Scott Feldman says: ==================== rocker: enable by default untagged VLAN support This patch set is a followup to Simon Horman's RFC patch: [PATCH/RFC net-next] rocker: by default accept untagged packets Now, on port probe, we install untagged VLAN (vid=0) support for each port as the default. This is equivalent to the command: bridge vlan add vid 0 dev DEV self Accepting untagged VLAN pkts is a reasonable default, but the user could override this with: bridge vlan del vid 0 dev DEV self With this, we no longer need 8021q module to install vid=0 when port interface opens. In fact, we don't need support for legacy VLAN ndo ops at all since they're superseded by bridge_setlink/dellink. So remove legacy VLAN ndo ops support in driver. (The legacy VLAN ndo ops are supported by bonding/team drivers, but don't fit into the transaction model offered by switchdev, so switching all VLAN functions to bridge_setlink/dellink switchdev support gets us stacked driver + transaction model support). ==================== Signed-off-by: -
Scott Feldman authored
Remove support for legacy ndo ops .ndo_vlan_rx_add_vid/.ndo_vlan_rx_kill_vid. Rocker will use bridge_setlink/dellink exclusively for VLAN add/del operations. The legacy ops are needed if using 8021q driver module to setup VLANs on the port. But an alternative exists in using bridge_setlink/delink to setup VLANs, which doesn't depend on 8021q module. So rocker will switch to the newer setlink/dellink ops. VLANs can added/delete from the port, regardless if port is bridged or not, using the bridge commands: bridge vlan [add|del] vid VID dev DEV self (Yes, I agree it's confusing to use the "bridge" command to set a VLAN on a non-bridged port). Using setlink/dellink over legacy ops let's us handle the stacked driver case automatically. It's built-in. setlink also pass additional flags (PVID, egress untagged) that aren't available with the legacy ops. Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
-
Scott Feldman authored
When the port joins a bridge, the port's internal VLAN ID needs to change to the bridge's internal VLAN ID. Likewise, when leaving the bridge, the internal VLAN ID reverts back the port's original internal VLAN ID. (The internal VLAN ID is used by device to internally mark untagged pkts with some VLAN, which will eventually be removed on egress...think PVID). When the internal VLAN ID changes, we need to update the VLAN table entries and the router MAC entries for IP/IPv6 to reflect the new internal VLAN ID. This patch makes use of the common rocker_port_vlan_add/del functions to make sure the tables are updated for the current internal VLAN ID. Signed-off-by:
-
Scott Feldman authored
On port probe, install by default untagged VLAN support. This is equivalent to running the command: bridge vlan add vid 0 dev DEV self A user could, if they wanted, manaully removing untagged support from the port by running the command: bridge vlan del vid 0 dev DEV self But installing it by default on port initialization gives the normal expected behavior. Signed-off-by:
-
Scott Feldman authored
Basic house keeping: If there is an error adding the router MAC for this vlan, removing the just installed VLAN table entry to leave device in same state as before failure. Signed-off-by:
-
Scott Feldman authored
When allocating the array of rocker port pointers, zero the array values so we can test for !NULL to see if port is allocated/registered. We'll need this later when installing untagged VLAN support for each port, during port probe. It's a long story, but to install a VLAN (vid=0 for untagged, in this case) on a port, we'll need to scan other ports to see if the VLAN group for that VLAN has been setup. To scan the other ports, we need to walk the port array. Signed-off-by:
-
- 01 Jun, 2015 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fix for net The following patch reverts the ebtables chunk that enforces counters that was introduced in the recently applied d26e2c9f ('Revert "netfilter: ensure number of counters is >0 in do_replace()"') since this breaks ebtables. ==================== Signed-off-by:
-
Toshiaki Makita authored
Currently packets with non-hardware-accelerated vlan cannot be handled by GRO. This causes low performance for 802.1ad and stacked vlan, as their vlan tags are currently not stripped by hardware. This patch adds GRO support for non-hardware-accelerated vlan and improves receive performance of them. Test Environment: vlan device (.1Q) on vlan device (.1ad) on ixgbe (82599) Result: - Before $ netperf -t TCP_STREAM -H 192.168.20.2 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.00 5233.17 Rx side CPU usage: %usr %sys %irq %soft %idle 0.27 58.03 0.00 41.70 0.00 - After $ netperf -t TCP_STREAM -H 192.168.20.2 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.00 7586.85 Rx side CPU usage: %usr %sys %irq %soft %idle 0.50 25.83 0.00 59.53 14.14 [ Register VLAN offloads with priority 10 -DaveM ] Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
Hariprasad Shenai authored
Remove unused function cxgb4_enable_db_coalescing() and cxgb4_disable_db_coalescing() Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2015-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * fix OTP parsing 8260 * fix powersave handling for 8260 brcmfmac: * fix null pointer crash ==================== Signed-off-by:
-
Simon Horman authored
The rocker (switch) of a rocker_port may be trivially obtained from the latter it seems cleaner not to pass the former to a function when the latter is being passed anyway. rocker_port_rx_proc() is omitted from this change as it is a hot path case. Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
-
