Skip to content

L
linux
Switch branch/tag
  1. 07 Aug, 2018 9 commits
    • John Hurley's avatar
      nfp: flower: allow matching on ipv4 UDP tunnel tos and ttl · d7ff7ec5
      John Hurley authored 
      The addition of FLOW_DISSECTOR_KEY_ENC_IP to TC flower means that the ToS
and TTL of the tunnel header can now be matched on.

Extend the NFP tunnel match function to include these new fields.
Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: default avatarSimon Horman <simon.horman@netronome.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d7ff7ec5
    • John Hurley's avatar
      nfp: flower: set ip tunnel ttl from encap action · 2a437471
      John Hurley authored 
      The TTL for encapsulating headers in IPv4 UDP tunnels is taken from a
route lookup. Modify this to first check if a user has specified a TTL to
be used in the TC action.
Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: default avatarSimon Horman <simon.horman@netronome.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2a437471
    • David S. Miller's avatar
      Merge branch 'WoL-filters' · 50ee42b9
      David S. Miller authored 
      Florian Fainelli says:

====================
net: Support Wake-on-LAN using filters

This is technically a v2, but this patch series builds on your feedback
and defines the following:

- a new WAKE_* bit: WAKE_FILTER which can be enabled alongside other type
  of Wake-on-LAN to support waking up on a programmed filter (match + action)
- a new RX_CLS_FLOW_WAKE flow action which can be specified by an user when
  inserting a flow using ethtool::rxnfc, similar to the existing RX_CLS_FLOW_DISC

The bcm_sf2 and bcmsysport drivers are updated accordingly to work in concert to
allow matching packets at the switch level, identified by their filter location
to be used as a match by the SYSTEM PORT (CPU/management controller) during
Wake-on-LAN.

Let me know if this looks better than the previous incarnation of the patch
series.

Attached is also the ethtool patch that I would be submitting once the uapi
changes are committed.

Thank you!

Changes in v2:

- bail out earlier in bcm_sf2_cfp's get_rxnfc if an error is
  encountered (Andrew)
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      50ee42b9
    • Florian Fainelli's avatar
      net: systemport: Add support for WAKE_FILTER · bb9051a2
      Florian Fainelli authored 
      The SYSTEMPORT MAC allows up to 8 filters to be programmed to wake-up
from LAN. Verify that we have up to 8 filters and program them to the
appropriate RXCHK entries to be matched (along with their masks).

We need to update the entry and exit to Wake-on-LAN mode to keep the
RXCHK engine running to match during suspend, but this is otherwise
fairly similar to Magic Packet detection.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb9051a2
    • Florian Fainelli's avatar
      net: dsa: bcm_sf2: Propagate ethtool::rxnfc to CPU port · 8a75f4f2
      Florian Fainelli authored 
      Allow propagating ethtool::rxnfc programming to the CPU/management port
such that it is possible for such a CPU to perform e.g: Wake-on-LAN
using filters configured by the switch. We need a tiny bit of
cooperation between the switch drivers which is able to do the full flow
matching, whereas the CPU/management port might not. The CPU/management
driver needs to return -EOPNOTSUPP to indicate an non critical error,
any other error code otherwise.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8a75f4f2
    • Florian Fainelli's avatar
      ethtool: Add WAKE_FILTER and RX_CLS_FLOW_WAKE · 6cfef793
      Florian Fainelli authored 
      Add the ability to specify through ethtool::rxnfc that a rule location is
special and will be used to participate in Wake-on-LAN, by e.g: having a
specific pattern be matched. When this is the case, fs->ring_cookie must
be set to the special value RX_CLS_FLOW_WAKE.

We also define an additional ethtool::wolinfo flag: WAKE_FILTER which
can be used to configure an Ethernet adapter to allow Wake-on-LAN using
previously programmed filters.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6cfef793
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next · 1ba98280
      David S. Miller authored 
      Daniel Borkmann says:

====================
pull-request: bpf-next 2018-08-07

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add cgroup local storage for BPF programs, which provides a fast
   accessible memory for storing various per-cgroup data like number
   of transmitted packets, etc, from Roman.

2) Support bpf_get_socket_cookie() BPF helper in several more program
   types that have a full socket available, from Andrey.

3) Significantly improve the performance of perf events which are
   reported from BPF offload. Also convert a couple of BPF AF_XDP
   samples overto use libbpf, both from Jakub.

4) seg6local LWT provides the End.DT6 action, which allows to
   decapsulate an outer IPv6 header containing a Segment Routing Header.
   Adds this action now to the seg6local BPF interface, from Mathieu.

5) Do not mark dst register as unbounded in MOV64 instruction when
   both src and dst register are the same, from Arthur.

6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier
   instructions on arm64 for the AF_XDP sample code, from Brian.

7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts
   over from Python 2 to Python 3, from Jeremy.

8) Enable BTF build flags to the BPF sample code Makefile, from Taeung.

9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee.

10) Several improvements to the README.rst from the BPF documentation
    to make it more consistent with RST format, from Tobin.

11) Replace all occurrences of strerror() by calls to strerror_r()
    in libbpf and fix a FORTIFY_SOURCE build error along with it,
    from Thomas.

12) Fix a bug in bpftool's get_btf() function to correctly propagate
    an error via PTR_ERR(), from Yue.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1ba98280
    • Alexander Aring's avatar
      ieee802154: hwsim: fix rcu address annotation · c5d99d2b
      Alexander Aring authored 
      This patch fixes the following sparse warning about mismatch rcu
attribute for address space annotation:

...
error: incompatible types in comparison expression (different modifiers)
error: incompatible types in comparison expression (different address spaces)
...

Some __rcu annotation was at non-pointers list head structures and one was
missing in edge information which is used by rcu_assign_pointer() to
update edge setting information.

Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Fixes: f25da51f ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: default avatarAlexander Aring <aring@mojatatu.com>
Signed-off-by: default avatarStefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c5d99d2b
    • Roman Gushchin's avatar
      bpf: introduce update_effective_progs() · 85fc4b16
      Roman Gushchin authored 
      __cgroup_bpf_attach() and __cgroup_bpf_detach() functions have
a good amount of duplicated code, which is possible to eliminate
by introducing the update_effective_progs() helper function.

The update_effective_progs() calls compute_effective_progs()
and then in case of success it calls activate_effective_progs()
for each descendant cgroup. In case of failure (OOM), it releases
allocated prog arrays and return the error code.
Signed-off-by: default avatarRoman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      85fc4b16
  3. 06 Aug, 2018 31 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7