Add doxygen comments for enum mlx5_fpga_access_type.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

gcc-7.3.0 report following err:

  HOSTCC  net/bpfilter/main.o
In file included from net/bpfilter/main.c:9:0:
./include/uapi/linux/bpf.h:12:10: fatal error: linux/bpf_common.h: No such file or directory
 #include <linux/bpf_common.h>

remove it by adding a include path.
Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb->len is meaningless to user.
data length could be more helpful, with which we can easily filter out
the packet without payload.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- unindented continue
- check for null page
- signed return
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb dereferenced before check in sendpage
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

address suspicious code <gustavo@embeddedor.com>

1210       set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
1211       }

The issue is that in the code above, set_bit is never reached
due to the 'continue' statement at line 1208.

Also reported by bug report:<dan.carpenter@oracle.com>
1210       set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Not reachable.

Its required to wait for buffer in the send path and takes care of
unaddress and un-handled SOCK_NOSPACE.

v2: use csk_mem_free where appropriate
    proper indent of goto do_nonblock
    replace out with do_rm_wq
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

corrected the key length to copy 128b key. Removed 192b and 256b
key as user input supports key of size 128b in gcm_ctx
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: Add address attribute to control metric of prefix route

For use cases such as VRR (Virtual Router Redundancy) interface managers
want efficient control over the order of prefix routes when multiple
interfaces have addresses with overlapping/duplicate subnets.

Currently, if two interfaces have addresses in the same subnet, the order
of the prefix route entries is determined by the order in which the
addresses are assigned or the links brought up. Any actions like cycling
an interface up and down changes that order. This set adds a new attribute
for addresses to allow a user to specify the metric of the prefix route
associated with an address giving interface managers better and more
efficient control of the order of prefix routes.

Patches 1-3 refactor IPv6 address add functions to pass an ifa6_config
struct. The functions currently have a long list of arguments and adding
the metric just makes it worse. Because of the overall diff size in
moving the arguments to a struct, the change is done in stages to make
it easier to review starting with the bottom function and pushing the
struct up to callers in each successive patch.

Patch 4 introduces the new attribute.

Patches 5 and 6 add support for the new attribute to IPv4 and IPv6
addresses.

Patch 7 adds a set of test cases.

Patch 8 adds support to iproute2

Changes since RFC
- collapsed patches 1 and 3 into patch 2
- simplified stack variables in fib_modify_prefix_metric in patch 5
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add tests verifying prefix routes are inserted with expected metric.

IPv6 prefix route tests
    TEST: Default metric                                      [ OK ]
    TEST: User specified metric on first device               [ OK ]
    TEST: User specified metric on second device              [ OK ]
    TEST: Delete of address on first device                   [ OK ]
    TEST: Modify metric of address                            [ OK ]
    TEST: Prefix route removed on link down                   [ OK ]
    TEST: Prefix route with metric on link up                 [ OK ]

IPv4 prefix route tests
    TEST: Default metric                                      [ OK ]
    TEST: User specified metric on first device               [ OK ]
    TEST: User specified metric on second device              [ OK ]
    TEST: Delete of address on first device                   [ OK ]
    TEST: Modify metric of address                            [ OK ]
    TEST: Prefix route removed on link down                   [ OK ]
    TEST: Prefix route with metric on link up                 [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for IFA_RT_PRIORITY to ipv6 addresses.

If the metric is changed on an existing address then the new route
is inserted before removing the old one. Since the metric is one
of the route keys, the prefix route can not be atomically replaced.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for IFA_RT_PRIORITY to ipv4 addresses.

If the metric is changed on an existing address then the new route
is inserted before removing the old one. Since the metric is one
of the route keys, the prefix route can not be replaced.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, if two interfaces have addresses in the same connected route,
then the order of the prefix route entries is determined by the order in
which the addresses are assigned or the links brought up.

Add IFA_RT_PRIORITY to allow user to specify the metric of the prefix
route associated with an address giving interface managers better
control of the order of prefix routes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update inet6_addr_modify to take ifa6_config argument versus a parameter
list. This is an argument move only; no functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the creation of struct ifa6_config up to callers of inet6_addr_add.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move config parameters for adding an ipv6 address to a struct. struct
names stem from inet6_rtm_newaddr which is the modern handler for
adding an address.

Start the conversion to ifa6_config with ipv6_add_addr. This is an argument
move only; no functional change intended. Mapping of variable changes:

    addr      -->  cfg->pfx
    peer_addr -->  cfg->peer_pfx
    pfxlen    -->  cfg->plen
    flags     -->  cfg->ifa_flags

scope, valid_lft, prefered_lft have the same names within cfg
(with corrected spelling).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: use MRSR register for FW reset

Jiri says:

Introduce a MRSR register definition and use it to do FW reset instead
of existing mechanism using PCI BAR0 register.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

So far, the PCI BAR0 register is used for triggering FW reset. However,
that is a legacy attitude and it is recommended to use MRSR to perform
reset instead. So do that. Move the reset into init() function as
the cmd interface needs to be used. With that, IRQ initialization needs
to be moved as well. As a side effect, the reset move simplifies
the devlink reload flow.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is an exception in command interface processing in case the MRSR
register is written to. The register triggers FW reset and during the
reset FW returns an error. So handle this by ignoring this error while
writing to MRSR register.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit "net: qcom/emac: Encapsulate sgmii ops under one structure"
introduced the sgmii_ops structure, but did not correctly initialize
it on device tree platforms.  This resulted in compiler warnings when
ACPI is not enabled.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

With CONFIG_TLS=m and MLX5_CORE_EN=y, we get a link failure:

drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_ooo':
tls_rxtx.c:(.text+0x24c): undefined reference to `tls_get_record'
drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_tx_skb':
tls_rxtx.c:(.text+0x9a8): undefined reference to `tls_device_sk_destruct'

This narrows down the dependency to only allow the configurations
that will actually work. The existing dependency on TLS_DEVICE is
not sufficient here since MLX5_EN_TLS is a 'bool' symbol.

Fixes: c83294b9 ("net/mlx5e: TLS, Add Innova TLS TX support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the message be freed immediately, no need to trim it
back to the previous size.

Inspired by commit 7a9b3ec1 ("nl80211: remove unnecessary genlmsg_cancel() calls")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

net/ipv4/bpfilter/sockopt.c:13:5: warning:
 symbol 'bpfilter_mbox_request' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: abm: RED/MQ qdisc offload

This is second batch of advanced buffer management nfp driver
changes.  This series adds the qdisc offload.  Support for
a very simple subset of RED qdisc offload is added as needed
for DCTCP ECN marking (min and max thresholds set to the same
value).

The first two patches fix glitches introduced by the previous
series.  We have to be careful about phys_port_name handling,
because VFs share the same code path, and some user space may
get confused by the names we chose.

Since unlike previous offloads we can report the queue backlog
both in bytes and packets we need to adjust how statistics are
added up in the core (patch 6).

There are some extra statistics we want to expose which don't
fit into TC stats, namely counts of packets which have been fast-
-forwarded without getting enqueued because there was no
contention and number of packets that were ever queued (sum of
all momentary backlogs).  We expose those through ethtool stats
(patches 8 and 9).

Remaining 5 patches add MQ offload - to be able to set different
configurations on different queues.  Representors are made multi-
-queue and we add offload support to MQ.  MQ stats are added up
before calling ->dump qdiscs on the children, and therefore don't
include updated offload values.  To avoid clearly incorrect stats
MQ is made to also request stats update from offloads.  This way
we can correct the diff at the driver level.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Report the stat diff to make sure MQ stats add up to child stats.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MQ doesn't hold any statistics on its own, however, statistic
from offloads are requested starting from the root, hence MQ
will read the old values for its sums.  Call into the drivers,
because of the additive nature of the stats drivers are aware
of how much "pending updates" they have to children of the MQ.
Since MQ reset its stats on every dump we can simply offset
the stats, predicting how stats of offloaded children will
change.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for MQ offload and setting RED parameters
on queue-by-queue basis.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mq offload is trivial, we just need to let the device know
that the root qdisc is mq.  Alternative approach would be
to export qdisc_lookup() and make drivers check the root
type themselves, but notification via ndo_setup_tc is more
in line with other qdiscs.

Note that mq doesn't hold any stats on it's own, it just
adds up stats of its children.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allocate the PF representor as multi-queue to allow setting
the configuration per-queue.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a handful of statistics exposing some internal details
of the implementation.  Expose those via ethtool.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow nfp apps to add extra ethtool stats.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Report basic and extended RED statistics back to TC.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

AFAICT struct gnet_stats_queue.qlen is not used in Qdiscs.
It may, however, be useful for offloads to report HW queue
length there.  Add that value to the result of qdisc_qlen_sum().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Offload simple RED configurations.  For now support only DCTCP
like scenarios where min and max are the same.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Queue levels for simple ECN marking are stored in _abi_nfd_out_q_lvls_X
symbol, where X is the PCIe PF id.  Find out the location of that symbol
and add helpers for modifying it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ABM NIC FW has a cut-through mode where the PCIe queuing
is bypassed, thus working like our standard NIC FWs.  Use this
mode by default and only enable queuing in switchdev mode where
users can configure it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some drivers are using a bare number inside phys_port_name
as VF id and OpenStack's regexps will pick it up.  We can't
use a bare number for your vNICs, prefix the names with 'n'.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After recent change we started returning 0 from
ndo_get_phys_port_name for VFs.  The name parameter for
ndo_get_phys_port_name is not initialized by the stack so
this can lead to a crash.  We should have kept returning
-EOPNOTSUPP in the first place.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5e-updates-2018-05-25

This series includes updates for mlx5e netdev driver.

1) Allowr flow based VF vport mirroring under sriov switchdev scheme,
added support for offloading the TC mirred mirror sub-action, from
Chris Mi.

=================
From: Or Gerlitz <ogerlitz@mellanox.com>

The user will typically set the actions order such that the mirror
port (mirror VF) sees packets as the original port (VF under
mirroring) sent them or as it will receive them. In the general case,
it means that packets are potentially sent to the mirror port before
or after some actions were applied on them.

To properly do that, we follow on the exact action order as set for
the flow and make sure this will also be the case when we program the
HW offload.

If all the actions should apply before forwarding to the mirror and dest port,
mirroring is just multicasting to the two vports. Otherwise, we split
the TC flow to two HW rules, where the 1st applies only the actions
needed up to the mirror (if there are such) and the 2nd the rest of
the actions plus the forwarding to the dest vport.
=================

2) Move to order-0 only allocations (using fragmented work queues) for all
work queues used by the driver, RX and TX descriptor rings
(RQs, SQs and Completion Queues (CQs)), from Tariq Toukan.

3) Avoid resetting netdevice statistics on netdevice
state changes, from Eran Ben Elisha.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>