- 16 Apr, 2021 40 commits
-
-
Alex Elder authored
Add a new optional firmware-name property to the IPA DT node. It is used only if the modem is not doing early initialization (i.e., if the modem-init property is not present). Its value is the name of the firmware file to use; if it's not specified, a default name ("ipa_fws.mdt") is used. Signed-off-by:Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xuan Zhuo authored
In page_to_skb(), if we have enough tailroom to save skb_shared_info, we can use build_skb to create skb directly. No need to alloc for additional space. And it can save a 'frags slot', which is very friendly to GRO. Here, if the payload of the received package is too small (less than GOOD_COPY_LEN), we still choose to copy it directly to the space got by napi_alloc_skb. So we can reuse these pages. Testing Machine: The four queues of the network card are bound to the cpu1. Test command: for ((i=0;i<5;++i)); do sockperf tp --ip 192.168.122.64 -m 1000 -t 150& done The size of the udp package is 1000, so in the case of this patch, there will always be enough tailroom to use build_skb. The sent udp packet will be discarded because there is no port to receive it. The irqsoftd of the machine is 100%, we observe the received quantity displayed by sar -n DEV 1: no build_skb: 956864.00 rxpck/s build_skb: 1158465.00 rxpck/s Signed-off-by:Xuan Zhuo <xuanzhuo@linux.alibaba.com> Suggested-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Loic Poulain authored
The MHI WWWAN control driver allows MHI QCOM-based modems to expose different modem control protocols/ports via the WWAN framework, so that userspace modem tools or daemon (e.g. ModemManager) can control WWAN config and state (APN config, SMS, provider selection...). A QCOM-based modem can expose one or several of the following protocols: - AT: Well known AT commands interactive protocol (microcom, minicom...) - MBIM: Mobile Broadband Interface Model (libmbim, mbimcli) - QMI: QCOM MSM/Modem Interface (libqmi, qmicli) - QCDM: QCOM Modem diagnostic interface (libqcdm) - FIREHOSE: XML-based protocol for Modem firmware management (qmi-firmware-update) Note that this patch is mostly a rework of the earlier MHI UCI tentative that was a generic interface for accessing MHI bus from userspace. As suggested, this new version is WWAN specific and is dedicated to only expose channels used for controlling a modem, and for which related opensource userpace support exist. Signed-off-by:Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Loic Poulain authored
This change introduces initial support for a WWAN framework. Given the complexity and heterogeneity of existing WWAN hardwares and interfaces, there is no strict definition of what a WWAN device is and how it should be represented. It's often a collection of multiple devices that perform the global WWAN feature (netdev, tty, chardev, etc). One usual way to expose modem controls and configuration is via high level protocols such as the well known AT command protocol, MBIM or QMI. The USB modems started to expose them as character devices, and user daemons such as ModemManager learnt to use them. This initial version adds the concept of WWAN port, which is a logical pipe to a modem control protocol. The protocols are rawly exposed to user via character device, allowing straigthforward support in existing tools (ModemManager, ofono...). The WWAN core takes care of the generic part, including character device management, and relies on port driver operations to receive/submit protocol data. Since the different devices exposing protocols for a same WWAN hardware do not necessarily know about each others (e.g. two different USB interfaces, PCI/MHI channel devices...) and can be created/removed in different orders, the WWAN core ensures that all WAN ports contributing to the 'whole' WWAN feature are grouped under the same virtual WWAN device, relying on the provided parent device (e.g. mhi controller, USB device). It's a 'trick' I copied from Johannes's earlier WWAN subsystem proposal. This initial version is purposely minimalist, it's essentially moving the generic part of the previously proposed mhi_wwan_ctrl driver inside a common WWAN framework, but the implementation is open and flexible enough to allow extension for further drivers. Signed-off-by:
-
Stefan Chulski authored
Add parser entries for different IPv4 IHL values. Each entry will set the L4 header offset according to the IPv4 IHL field. L3 header offset will set during the parsing of the IPv4 protocol. Because of missed parser support for IP header length > 20, RX IPv4 checksum HW offload fails and skb->ip_summed set to CHECKSUM_NONE(checksum done by Network stack). This patch adds RX IPv4 checksum HW offload capability for frames with IP header length > 20. v1 --> v2 - Improve commit message. Suggested-by:
Dana Vardi <danat@marvell.com> Signed-off-by:
Stefan Chulski <stefanc@marvell.com> Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8152: support new chips Support new RTL8153 and RTL8156 series. ==================== Signed-off-by: -
Hayes Wang authored
The vendor mode is not always at config #1, so it is necessary to set the correct configuration number. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Hayes Wang authored
Support new firmware type and method for RTL8156 series. Signed-off-by:
-
Hayes Wang authored
Support RTL8153C, RTL8153D, RTL8156A, and RTL8156B. The RTL8156A and RTL8156B are the 2.5G ethernet. Signed-off-by:
-
Hayes Wang authored
The different chips may have different requests when changing mtu. Therefore, add a new help function of rtl_ops to change mtu. Besides, reset the tx/rx after changing mtu. Additionally, add mtu_to_size() and size_to_mtu() macros to simplify the code. Signed-off-by:
-
Hayes Wang authored
Use bits operations to record and check the firmware. Signed-off-by:
-
Hayes Wang authored
Set the maximum inter frame gap time (144ns) for speed 10M/half and 100M/half. It improves the performance for those speeds. And, there is no effect for the other speeds. For 10M/half and 100M/half, the fast inter frame gap time let the device couldn't use the feature of the aggregation effectively, because the transfer would be completed fastly. Therefore, use the maximum value to improve the effect of the aggregation. However, you may not feel the improvement for fast CPUs, because they compensate for the effect of the aggregation. Signed-off-by:
-
Ilya Lipnitskiy authored
The intention is for the loop to timeout if the body does not succeed. The current logic calls time_is_before_jiffies(timeout) which is false until after the timeout, so the loop body never executes. Fix by using readl_poll_timeout as a more standard and less error-prone solution. Fixes: ba37b7ca ("net: ethernet: mtk_eth_soc: add support for initializing the PPE") Signed-off-by:
Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Felix Fietkau <nbd@nbd.name> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Improve socket option handling MPTCP sockets have previously had limited socket option support. The architecture of MPTCP sockets (one userspace-facing MPTCP socket that manages one or more in-kernel TCP subflow sockets) adds complexity for passing options through to lower levels. This patch set adds MPTCP support for socket options commonly used with TCP. Patch 1 reverts an interim socket option fix (a socket option blocklist) that was merged in the net tree for v5.12. Patch 2 moves the socket option code to a separate file, with no functional changes. Patch 3 adds an allowlist for socket options that are known to function with MPTCP. Later patches in this set add more allowed options. Patches 4 and 5 add infrastructure for syncing MPTCP-level options with the TCP subflows. Patches 6-12 add support for specific socket options. Patch 13 adds a socket option self test. ==================== Signed-off-by: -
Florian Westphal authored
Extend mptcp_connect tool with SO_MARK support (-M <value>) and add a test case that checks that the packet mark gets copied to all subflows. This is done by only allowing packets with either skb->mark 1 or 2 via iptables. DROP rule packet counter is checked; if its not zero, print an error message and fail the test case. Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Florian Westphal authored
TCP_CONGESTION is set for all subflows. The mptcp socket gains icsk_ca_ops too so it can be used to keep the authoritative state that should be set on new/future subflows. TCP_INFO will return first subflow only. The out-of-tree kernel has a MPTCP_INFO getsockopt, this could be added later on. Acked-by:
-
Florian Westphal authored
Handle SO_DEBUG and set it on all subflows. Ignore those values not implemented on TCP sockets. Acked-by:
-
Florian Westphal authored
Replicate to all subflows. Acked-by:
-
Florian Westphal authored
Value is synced to all subflows. Acked-by:
-
Florian Westphal authored
Similar to PRIORITY/KEEPALIVE: needs to be mirrored to all subflows. Acked-by:
-
Florian Westphal authored
Similar to previous patch: needs to be mirrored to all subflows. Device bind is simpler: it is only done on the initial (listener) sk. Acked-by:
-
Florian Westphal authored
start with something simple: both take an integer value, both need to be mirrored to all subflows. Acked-by:
-
Florian Westphal authored
Paolo Abeni suggested to avoid re-syncing new subflows because they inherit options from listener. In case options were set on listener but are not set on mptcp-socket there is no need to do any synchronisation for new subflows. This change sets sockopt_seq of new mptcp sockets to the seq of the mptcp listener sock. Subflow sequence is set to the embedded tcp listener sk. Add a comment explaing why sk_state is involved in sockopt_seq generation. Acked-by:
-
Florian Westphal authored
Handle following cases: 1. setsockopt is called with multiple subflows. Change might have to be mirrored to all of them. This is done directly in process context/setsockopt call. 2. Outgoing subflow is created after one or several setsockopt() calls have been made. Old setsockopt changes should be synced to the new socket. 3. Incoming subflow, after setsockopt call(s). Cases 2 and 3 are handled right after the join list is spliced to the conn list. Not all sockopt values can be just be copied by value, some require helper calls. Those can acquire socket lock (which can sleep). If the join->conn list splicing is done from preemptible context, synchronization can be done right away, otherwise its deferred to work queue. Acked-by:
-
Paolo Abeni authored
Unrolling mcast state at msk dismantel time is bug prone, as syzkaller reported: ====================================================== WARNING: possible circular locking dependency detected 5.11.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor905/8822 is trying to acquire lock: ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323 but task is already holding lock: ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline] ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507 which lock already depends on the new lock. Instead we can simply forbid any mcast-related setsockopt. Let's do the same with all other non supported sockopts. Fixes: 717e79c8 ("mptcp: Add setsockopt()/getsockopt() socket operations") Co-developed-by:Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Paolo Abeni authored
The MPTCP sockopt implementation is going to be much more big and complex soon. Let's move it to a different source file. No functional change intended. Signed-off-by:
-
Matthieu Baerts authored
This change reverts commit 86581852 ("mptcp: forbit mcast-related sockopt on MPTCP sockets"). As announced in the cover letter of the mentioned patch above, the following commits introduce a larger MPTCP sockopt implementation refactor. This time, we switch from a blocklist to an allowlist. This is safer for the future where new sockoptions could be added while not being fully supported with MPTCP sockets and thus causing unstabilities. Suggested-by:
-
Gatis Peisenieks authored
Tx queue cleanup happens in interrupt handler on same core as rx queue processing. Both can take considerable amount of processing in high packet-per-second scenarios. Sending big amounts of packets can stall the rx processing which is unfair and also can lead to out-of-memory condition since __dev_kfree_skb_irq queues the skbs for later kfree in softirq which is not allowed to happen with heavy load in interrupt handler. This puts tx cleanup in its own napi and enables threaded napi to allow the rx/tx queue processing to happen on different cores. The ability to sustain equal amounts of tx/rx traffic increased: from 280Kpps to 1130Kpps on Threadripper 3960X with upcoming Mikrotik 10/25G NIC, from 520Kpps to 850Kpps on Intel i3-3320 with Mikrotik RB44Ge adapter. Signed-off-by:
Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Pass the BR_FDB_LOCAL information to switchdev drivers Bridge FDB entries with the is_local flag are entries which are terminated locally and not forwarded. Switchdev drivers might want to be notified of these addresses so they can trap them. If they don't program these entries to hardware, there is no guarantee that they will do the right thing with these entries, and they won't be, let's say, flooded. Ideally none of the switchdev drivers should ignore these entries, but having access to the is_local bit is the bare minimum change that should be done in the bridge layer, before this is even possible. These 2 changes are extracted from the larger "RX filtering in DSA" series: https://patchwork.kernel.org/project/netdevbpf/patch/20210224114350.2791260-8-olteanv@gmail.com/ https://patchwork.kernel.org/project/netdevbpf/patch/20210224114350.2791260-9-olteanv@gmail.com/ and submitted separately, because they touch all switchdev drivers, while the rest is mostly specific to DSA. This change is not a functional one, in the sense that everybody still ignores the local FDB entries, but this will be changed by further patches at least for DSA. ==================== Signed-off-by:
-
Vladimir Oltean authored
As explained in bugfix commit 6ab4c311 ("net: bridge: don't notify switchdev for local FDB addresses") as well as in this discussion: https://lore.kernel.org/netdev/20210117193009.io3nungdwuzmo5f7@skbuf/ the switchdev notifiers for FDB entries managed to have a zero-day bug, which was that drivers would not know what to do with local FDB entries, because they were not told that they are local. The bug fix was to simply not notify them of those addresses. Let us now add the 'is_local' bit to bridge FDB entries, and make all drivers ignore these entries by their own choice. Co-developed-by:
Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Tobias Waldekranz authored
Instead of having to add more and more arguments to br_switchdev_fdb_call_notifiers, get rid of it and build the info struct directly in br_switchdev_fdb_notify. Signed-off-by:
-
Eric Dumazet authored
We need to store cmlen instead of len in cm->cmsg_len. Fixes: 38ebcf50 ("scm: optimize put_cmsg()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: add standard FEC statistics This set adds uAPI for reporting standard FEC statistics, and implements it in a handful of drivers. The statistics are taken from the IEEE standard, with one extra seemingly popular but not standard statistics added. The implementation is similar to that of the pause frame statistics, user requests the stats by setting a bit (ETHTOOL_FLAG_STATS) in the common ethtool header of ETHTOOL_MSG_FEC_GET. Since standard defines the statistics per lane what's reported is both total and per-lane counters: # ethtool -I --show-fec eth0 FEC parameters for eth0: Configured FEC encodings: None Active FEC encoding: None Statistics: corrected_blocks: 256 Lane 0: 255 Lane 1: 1 uncorrectable_blocks: 145 Lane 0: 128 Lane 1: 17 v2: check for errors in mlx5 register access ==================== Signed-off-by: -
Jakub Kicinski authored
Report corrected bits. v2: catch reg access errors (Saeed) Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Jakub Kicinski authored
Report what appears to be the standard block counts: - 30.5.1.1.17 aFECCorrectedBlocks - 30.5.1.1.18 aFECUncorrectableBlocks Don't report the per-lane symbol counts, if those really count symbols they are not what the standard calls for (even if symbols seem like the most useful thing to count.) Fingers crossed that fec_corrected_errors is not in symbols. Signed-off-by:
-
Jakub Kicinski authored
Report corrected bits. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Jakub Kicinski authored
Similarly to pause statistics add stats for FEC. The IEEE standard mandates two sets of counters: - 30.5.1.1.17 aFECCorrectedBlocks - 30.5.1.1.18 aFECUncorrectableBlocks where block is a block of bits FEC operates on. Each of these counters is defined per lane (PCS instance). Multiple vendors provide number of corrected _bits_ rather than/as well as blocks. This set adds the 2 standard-based block counters and a extra one for corrected bits. Counters are exposed to user space via netlink in new attributes. Each attribute carries an array of u64s, first element is the total count, and the following ones are a per-lane break down. Much like with pause stats the operation will not fail when driver does not implement the get_fec_stats callback (nor can the driver fail the operation by returning an error). If stats can't be reported the relevant attributes will be empty. Signed-off-by:
-
Jakub Kicinski authored
Refactor fec_prepare_data() a little bit to skip the body of the function and exit on error. Currently the code depends on the fact that we only have one call which may fail between ethnl_ops_begin() and ethnl_ops_complete() and simply saves the error code. This will get hairy with the stats also being queried. No functional changes. Signed-off-by:
-
Jakub Kicinski authored
We'll need it for FEC stats as well. Signed-off-by:
-
Eric Dumazet authored
Calling two copy_to_user() for very small regions has very high overhead. Switch to inlined unsafe_put_user() to save one stac/clac sequence, and avoid copy_to_user(). Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
