- 17 Sep, 2015 1 commit
-
-
Johan Hedberg authored
There are several actions that smp_conn_security() might make that do not require a valid SMP context (conn->smp pointer). One of these actions is to encrypt the link with an existing LTK. If the SMP context wasn't initialized properly we should still allow the independent actions to be done, i.e. the check for the context should only be done at the last possible moment. Reported-by:
Chuck Ebbert <cebbert.lkml@gmail.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.0+
-
- 15 Sep, 2015 13 commits
-
-
Julia Lawall authored
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); @@ expression x; @@ -if (x != NULL) { \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); x = NULL; -} // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) { \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); x = NULL; -} // </smpl> Signed-off-by:
-
Julia Lawall authored
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by:
-
Jesse Gross authored
Masks were added to OVS flows in a way that was backwards compatible with userspace programs that did not generate masks. As a result, it is possible that we may receive flows that do not have a mask and we need to synthesize one. Generating a mask requires iterating over attributes and descending into nested attributes. For each level we need to know the size to generate the correct mask. We do this with a linked table of attribute types. Although the logic to handle these nested attributes was there in concept, there are a number of bugs in practice. Examples include incomplete links between tables, variable length attributes being treated as nested and missing sanity checks. Signed-off-by:
Jesse Gross <jesse@nicira.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Sjoerd Simons authored
The reset delays used for stmmac are in the order of 10ms to 1 second, which is far too long for udelay usage, so switch to using msleep. Practically this fixes the PHY not being reliably detected in some cases as udelay wouldn't actually delay for long enough to let the phy reliably be reset. Signed-off-by:
Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by:
-
Roopa Prabhu authored
problem reported: kernel 4.1.3 ------------ # bridge vlan port vlan ids eth0 1 PVID Egress Untagged 90 91 92 93 94 95 96 97 98 99 100 vmbr0 1 PVID Egress Untagged 94 kernel 4.2 ----------- # bridge vlan port vlan ids ndo_bridge_getlink can return -EOPNOTSUPP when an interfaces ndo_bridge_getlink op is set to switchdev_port_bridge_getlink and CONFIG_SWITCHDEV is not defined. This today can happen to bond, rocker and team devices. This patch adds -EOPNOTSUPP checks after calls to ndo_bridge_getlink. Fixes: 85fdb956 ("switchdev: cut over to new switchdev_port_bridge_getlink") Reported-by:
Alexandre DERUMIER <aderumier@odiso.com> Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Simon Guinot authored
This patch fixes a regression introduced by the commit a84e3289 ("net: mvneta: fix refilling for Rx DMA buffers"). Due to this commit the newly allocated Rx buffers are DMA-unmapped in place of those passed to the networking stack. Obviously, this causes data corruptions. This patch fixes the issue by ensuring that the right Rx buffers are DMA-unmapped. Reported-by:
Oren Laskin <oren@igneous.io> Signed-off-by:
Simon Guinot <simon.guinot@sequanux.org> Fixes: a84e3289 ("net: mvneta: fix refilling for Rx DMA buffers") Cc: <stable@vger.kernel.org> # v3.8+ Tested-by:
-
David S. Miller authored
Martin KaFai Lau says: ==================== ipv6: Fix dst_entry refcnt bugs in ip6_tunnel v4: - Fix a compilation error in patch 5 when CONFIG_LOCKDEP is turned on and re-test it v3: - Merge a 'if else if' test in patch 4 - Use rcu_dereference_protected in patch 5 to fix a sparse check when CONFIG_SPARSE_RCU_POINTER is enabled v2: - Add patch 4 and 5 to remove the spinlock v1: This patch series is to fix the dst refcnt bugs in ip6_tunnel. Patch 1 and 2 are the prep works. Patch 3 is the fix. I can reproduce the bug by adding and removing the ip6gre tunnel while running a super_netperf TCP_CRR test. I get the following trace by adding WARN_ON_ONCE(newrefcnt < 0) to dst_release(): [ 312.760432] ------------[ cut here ]------------ [ 312.774664] WARNING: CPU: 2 PID: 10263 at net/core/dst.c:288 dst_release+0xf3/0x100() [ 312.776041] Modules linked in: k10temp coretemp hwmon ip6_gre ip6_tunnel tunnel6 ipmi_devintf ipmi_ms\ ghandler ip6table_filter ip6_tables xt_NFLOG nfnetlink_log nfnetlink xt_comment xt_statistic iptable_fil\ ter ip_tables x_tables nfsv3 nfs_acl nfs fscache lockd grace mptctl netconsole autofs4 rpcsec_gss_krb5 a\ uth_rpcgss oid_registry sunrpc ipv6 dm_mod loop iTCO_wdt iTCO_vendor_support serio_raw rtc_cmos pcspkr i\ 2c_i801 i2c_core lpc_ich mfd_core ehci_pci ehci_hcd e1000e mlx4_en ptp pps_core vxlan udp_tunnel ip6_udp\ _tunnel mlx4_core sg button ext3 jbd mpt2sas raid_class [ 312.785302] CPU: 2 PID: 10263 Comm: netperf Not tainted 4.2.0-rc8-00046-g4db9b63-dirty #15 [ 312.791695] Hardware name: Quanta Freedom /Windmill-EP, BIOS F03_3B04 09/12/2013 [ 312.792965] ffffffff819dca2c ffff8811dfbdf6f8 ffffffff816537de ffff88123788fdb8 [ 312.794263] 0000000000000000 ffff8811dfbdf738 ffffffff81052646 ffff8811dfbdf768 [ 312.795593] ffff881203a98180 00000000ffffffff ffff88242927a000 ffff88120a2532e0 [ 312.796946] Call Trace: [ 312.797380] [<ffffffff816537de>] dump_stack+0x45/0x57 [ 312.798288] [<ffffffff81052646>] warn_slowpath_common+0x86/0xc0 [ 312.799699] [<ffffffff8105273a>] warn_slowpath_null+0x1a/0x20 [ 312.800852] [<ffffffff8159f9b3>] dst_release+0xf3/0x100 [ 312.801834] [<ffffffffa03f1308>] ip6_tnl_dst_store+0x48/0x70 [ip6_tunnel] [ 312.803738] [<ffffffffa03fd0b6>] ip6gre_xmit2+0x536/0x720 [ip6_gre] [ 312.804774] [<ffffffffa03fd40a>] ip6gre_tunnel_xmit+0x16a/0x410 [ip6_gre] [ 312.805986] [<ffffffff8159934b>] dev_hard_start_xmit+0x23b/0x390 [ 312.808810] [<ffffffff815a2f5f>] ? neigh_destroy+0xef/0x140 [ 312.809843] [<ffffffff81599a6c>] __dev_queue_xmit+0x48c/0x4f0 [ 312.813931] [<ffffffff81599ae3>] dev_queue_xmit_sk+0x13/0x20 [ 312.814993] [<ffffffff815a0832>] neigh_direct_output+0x12/0x20 [ 312.817448] [<ffffffffa021d633>] ip6_finish_output2+0x183/0x460 [ipv6] [ 312.818762] [<ffffffff81306fc5>] ? find_next_bit+0x15/0x20 [ 312.819671] [<ffffffffa021fd79>] ip6_finish_output+0x89/0xe0 [ipv6] [ 312.820720] [<ffffffffa021fe14>] ip6_output+0x44/0xe0 [ipv6] [ 312.821762] [<ffffffff815c8809>] ? nf_hook_slow+0x69/0xc0 [ 312.823123] [<ffffffffa021d232>] ip6_xmit+0x242/0x4c0 [ipv6] [ 312.824073] [<ffffffffa021c9f0>] ? ac6_proc_exit+0x20/0x20 [ipv6] [ 312.825116] [<ffffffffa024c751>] inet6_csk_xmit+0x61/0xa0 [ipv6] [ 312.826127] [<ffffffff815eb590>] tcp_transmit_skb+0x4f0/0x9b0 [ 312.827441] [<ffffffff815ed267>] tcp_connect+0x637/0x7a0 [ 312.828327] [<ffffffffa0245906>] tcp_v6_connect+0x2d6/0x550 [ipv6] [ 312.829581] [<ffffffff81606f05>] __inet_stream_connect+0x95/0x2f0 [ 312.830600] [<ffffffff810ae13a>] ? hrtimer_try_to_cancel+0x1a/0xf0 [ 312.833456] [<ffffffff812fba19>] ? timerqueue_add+0x59/0xb0 [ 312.834407] [<ffffffff81607198>] inet_stream_connect+0x38/0x50 [ 312.835886] [<ffffffff8157cb17>] SYSC_connect+0xb7/0xf0 [ 312.840035] [<ffffffff810af6d3>] ? do_setitimer+0x1b3/0x200 [ 312.840983] [<ffffffff810af75a>] ? alarm_setitimer+0x3a/0x70 [ 312.841941] [<ffffffff8157d7ae>] SyS_connect+0xe/0x10 [ 312.842818] [<ffffffff81659297>] entry_SYSCALL_64_fastpath+0x12/0x6a [ 312.844206] ---[ end trace 43f3ecd86c3b1313 ]--- ==================== Signed-off-by: -
Martin KaFai Lau authored
This patch uses a seqlock to ensure consistency between idst->dst and idst->cookie. It also makes dst freeing from fib tree to undergo a rcu grace period. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Martin KaFai Lau authored
It is a prep work to get dst freeing from fib tree undergo a rcu grace period. The following is a common paradigm: if (ip6_del_rt(rt)) dst_free(rt) which means, if rt cannot be deleted from the fib tree, dst_free(rt) now. 1. We don't know the ip6_del_rt(rt) failure is because it was not managed by fib tree (e.g. DST_NOCACHE) or it had already been removed from the fib tree. 2. If rt had been managed by the fib tree, ip6_del_rt(rt) failure means dst_free(rt) has been called already. A second dst_free(rt) is not always obviously safe. The rt may have been destroyed already. 3. If rt is a DST_NOCACHE, dst_free(rt) should not be called. 4. It is a stopper to make dst freeing from fib tree undergo a rcu grace period. This patch is to use a DST_NOCACHE flag to indicate a rt is not managed by the fib tree. Signed-off-by:
-
Martin KaFai Lau authored
Problems in the current dst_entry cache in the ip6_tunnel: 1. ip6_tnl_dst_set is racy. There is no lock to protect it: - One major problem is that the dst refcnt gets messed up. F.e. the same dst_cache can be released multiple times and then triggering the infamous dst refcnt < 0 warning message. - Another issue is the inconsistency between dst_cache and dst_cookie. It can be reproduced by adding and removing the ip6gre tunnel while running a super_netperf TCP_CRR test. 2. ip6_tnl_dst_get does not take the dst refcnt before returning the dst. This patch: 1. Create a percpu dst_entry cache in ip6_tnl 2. Use a spinlock to protect the dst_cache operations 3. ip6_tnl_dst_get always takes the dst refcnt before returning Signed-off-by: -
Martin KaFai Lau authored
It is a prep work to fix the dst_entry refcnt bugs in ip6_tunnel. This patch rename: 1. ip6_tnl_dst_check() to ip6_tnl_dst_get() to better reflect that it will take a dst refcnt in the next patch. 2. ip6_tnl_dst_store() to ip6_tnl_dst_set() to have a more conventional name matching with ip6_tnl_dst_get(). Signed-off-by:
-
Martin KaFai Lau authored
It is a prep work to fix the dst_entry refcnt bugs in ip6_tunnel. This patch refactors some common init codes used by both ip6gre_tunnel_init and ip6gre_tap_init. Signed-off-by:
-
- 11 Sep, 2015 19 commits
-
-
Alexey Khoroshilov authored
ali_ircc_sir_change_speed() is always called with self->lock held, so acquiring the lock inside it leads to unavoidable deadlock. Call graph: ali_ircc_sir_change_speed() is called from ali_ircc_change_speed() ali_ircc_fir_hard_xmit() under spin_lock_irqsave(&self->lock, flags); ali_ircc_sir_hard_xmit() under spin_lock_irqsave(&self->lock, flags); ali_ircc_net_ioctl() under spin_lock_irqsave(&self->lock, flags); ali_ircc_dma_xmit_complete() ali_ircc_fir_interrupt() ali_ircc_interrupt() under spin_lock(&self->lock); ali_ircc_sir_write_wakeup() ali_ircc_sir_interrupt() ali_ircc_interrupt() under spin_lock(&self->lock); The patch removes spin_lock/unlock from ali_ircc_sir_change_speed(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Joe Stringer authored
When NF_CONNTRACK is built-in, NF_DEFRAG_IPV6 is a module, and OPENVSWITCH is built-in, the following build error would occur: net/built-in.o: In function `ovs_ct_execute': (.text+0x10f587): undefined reference to `nf_ct_frag6_gather' Fixes: 7f8a436e ("openvswitch: Add conntrack action") Reported-by:
Jim Davis <jim.epost@gmail.com> Signed-off-by:
Joe Stringer <joestringer@nicira.com> Acked-by:
-
Linus Lüssing authored
With the newly introduced helper functions the skb pulling is hidden in the checksumming function - and undone before returning to the caller. The IGMPv3 and MLDv2 report parsing functions in the bridge still assumed that the skb is pointing to the beginning of the IGMP/MLD message while it is now kept at the beginning of the IPv4/6 header, breaking the message parsing and creating packet loss. Fixing this by taking the offset between IP and IGMP/MLD header into account, too. Fixes: 9afd85c9 ("net: Export IGMP/MLD message validation code") Reported-by:
Tobias Powalowski <tobias.powalowski@googlemail.com> Tested-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
Arnd Bergmann authored
commit c48f350f "bnx2x: Add MFW dump support" added the bnx2x_update_mfw_dump() function that reads the current time and stores it in a 32-bit field that gets passed into a buffer in a fixed format. This is potentially broken when the epoch overflows in 2038, and otherwise overflows in 2106. As we're trying to avoid uses of struct timeval for this reason, I noticed the addition of this function, and tried to rewrite it in a way that is more explicit about the overflow and that will keep working once we deprecate struct timeval. I assume that it is not possible to change the ABI any more, otherwise we should try to use a 64-bit field for the seconds right away. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Acked-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
Consider sctp module is unloaded and is being requested because an user is creating a sctp socket. During initialization, sctp will add the new protocol type and then initialize pernet subsys: status = sctp_v4_protosw_init(); if (status) goto err_protosw_init; status = sctp_v6_protosw_init(); if (status) goto err_v6_protosw_init; status = register_pernet_subsys(&sctp_net_ops); The problem is that after those calls to sctp_v{4,6}_protosw_init(), it is possible for userspace to create SCTP sockets like if the module is already fully loaded. If that happens, one of the possible effects is that we will have readers for net->sctp.local_addr_list list earlier than expected and sctp_net_init() does not take precautions while dealing with that list, leading to a potential panic but not limited to that, as sctp_sock_init() will copy a bunch of blank/partially initialized values from net->sctp. The race happens like this: CPU 0 | CPU 1 socket() | __sock_create | socket() inet_create | __sock_create list_for_each_entry_rcu( | answer, &inetsw[sock->type], | list) { | inet_create /* no hits */ | if (unlikely(err)) { | ... | request_module() | /* socket creation is blocked | * the module is fully loaded | */ | sctp_init | sctp_v4_protosw_init | inet_register_protosw | list_add_rcu(&p->list, | last_perm); | | list_for_each_entry_rcu( | answer, &inetsw[sock->type], sctp_v6_protosw_init | list) { | /* hit, so assumes protocol | * is already loaded | */ | /* socket creation continues | * before netns is initialized | */ register_pernet_subsys | Simply inverting the initialization order between register_pernet_subsys() and sctp_v4_protosw_init() is not possible because register_pernet_subsys() will create a control sctp socket, so the protocol must be already visible by then. Deferring the socket creation to a work-queue is not good specially because we loose the ability to handle its errors. So, as suggested by Vlad, the fix is to split netns initialization in two moments: defaults and control socket, so that the defaults are already loaded by when we register the protocol, while control socket initialization is kept at the same moment it is today. Fixes: 4db67e80 ("sctp: Make the address lists per network namespace") Signed-off-by:Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Tycho Andersen authored
Instead of always emitting BPF_REG_X, let's emit BPF_REG_X only when the source actually is BPF_X. This causes programs generated by the classic converter to not be importable via bpf(), as the eBPF verifier checks that the src_reg is correct or 0. While not a problem yet, this will be a problem when BPF_PROG_DUMP lands, and we can potentially dump and re-import programs generated by the converter. Signed-off-by:
Tycho Andersen <tycho.andersen@canonical.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Daniel Borkmann authored
Ken-ichirou reported that running netlink in mmap mode for receive in combination with nlmon will throw a NULL pointer dereference in __kfree_skb() on nlmon_xmit(), in my case I can also trigger an "unable to handle kernel paging request". The problem is the skb_clone() in __netlink_deliver_tap_skb() for skbs that are mmaped. I.e. the cloned skb doesn't have a destructor, whereas the mmap netlink skb has it pointed to netlink_skb_destructor(), set in the handler netlink_ring_setup_skb(). There, skb->head is being set to NULL, so that in such cases, __kfree_skb() doesn't perform a skb_release_data() via skb_release_all(), where skb->head is possibly being freed through kfree(head) into slab allocator, although netlink mmap skb->head points to the mmap buffer. Similarly, the same has to be done also for large netlink skbs where the data area is vmalloced. Therefore, as discussed, make a copy for these rather rare cases for now. This fixes the issue on my and Ken-ichirou's test-cases. Reference: http://thread.gmane.org/gmane.linux.network/371129 Fixes: bcbde0d4 ("net: netlink: virtual tap device management") Reported-by:
Ken-ichirou MATSUZAWA <chamaken@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes since the last update: the HD-audio quirks as usual with a USB-audio fix and a trivial fix for the old sparc driver" * tag 'sound-fix-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Change internal PCM order ALSA: hda - Fix white noise on Dell M3800 ALSA: hda - Use ALC880_FIXUP_FUJITSU for FSC Amilo M1437 ALSA: hda - Enable headphone jack detect on old Fujitsu laptops ALSA: sparc: amd7930: Fix module autoload for OF platform driver ALSA: hda - Add some FIXUP quirks for white noise on Dell laptop.
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Just a bunch of fixes to squeeze in before -rc1: - three nouveau regression fixes - one qxl regression fix - a bunch of i915 fixes ... and some core displayport/atomic fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/device: enable c800 quirk for tecra w50 drm/nouveau/clk/gt215: Unbreak engine pausing for GT21x/MCP7x drm/nouveau/gr/nv04: fix big endian setting on gr context drm/qxl: validate monitors config modes drm/i915: Allow DSI dual link to be configured on any pipe drm/i915: Don't try to use DDR DVFS on CHV when disabled in the BIOS drm/i915: Fix CSR MMIO address check drm/i915: Limit the number of loops for reading a split 64bit register drm/i915: Fix broken mst get_hw_state. drm/i915: Pass hpd_status_i915[] to intel_get_hpd_pins() in pre-g4x uapi/drm/i915_drm.h: fix userspace compilation. drm/i915: Always mark the object as dirty when used by the GPU drm/dp: Add dp_aux_i2c_speed_khz module param to set the assume i2c bus speed drm/dp: Adjust i2c-over-aux retry count based on message size and i2c bus speed drm/dp: Define AUX_RETRY_INTERVAL as 500 us drm/atomic: Fix bookkeeping with TEST_ONLY, v3.
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6Dave Airlie authored
three nouveau regression fixes. * 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/device: enable c800 quirk for tecra w50 drm/nouveau/clk/gt215: Unbreak engine pausing for GT21x/MCP7x drm/nouveau/gr/nv04: fix big endian setting on gr context
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull blk-cg updates from Jens Axboe: "A bit later in the cycle, but this has been in the block tree for a a while. This is basically four patchsets from Tejun, that improve our buffered cgroup writeback. It was dependent on the other cgroup changes, but they went in earlier in this cycle. Series 1 is set of 5 patches that has cgroup writeback updates: - bdi_writeback iteration fix which could lead to some wb's being skipped or repeated during e.g. sync under memory pressure. - Simplification of wb work wait mechanism. - Writeback tracepoints updated to report cgroup. Series 2 is is a set of updates for the CFQ cgroup writeback handling: cfq has always charged all async IOs to the root cgroup. It didn't have much choice as writeback didn't know about cgroups and there was no way to tell who to blame for a given writeback IO. writeback finally grew support for cgroups and now tags each writeback IO with the appropriate cgroup to charge it against. This patchset updates cfq so that it follows the blkcg each bio is tagged with. Async cfq_queues are now shared across cfq_group, which is per-cgroup, instead of per-request_queue cfq_data. This makes all IOs follow the weight based IO resource distribution implemented by cfq. - Switched from GFP_ATOMIC to GFP_NOWAIT as suggested by Jeff. - Other misc review points addressed, acks added and rebased. Series 3 is the blkcg policy cleanup patches: This patchset contains assorted cleanups for blkcg_policy methods and blk[c]g_policy_data handling. - alloc/free added for blkg_policy_data. exit dropped. - alloc/free added for blkcg_policy_data. - blk-throttle's async percpu allocation is replaced with direct allocation. - all methods now take blk[c]g_policy_data instead of blkcg_gq or blkcg. And finally, series 4 is a set of patches cleaning up the blkcg stats handling: blkcg's stats have always been somwhat of a mess. This patchset tries to improve the situation a bit. - The following patches added to consolidate blkcg entry point and blkg creation. This is in itself is an improvement and helps colllecting common stats on bio issue. - per-blkg stats now accounted on bio issue rather than request completion so that bio based and request based drivers can behave the same way. The issue was spotted by Vivek. - cfq-iosched implements custom recursive stats and blk-throttle implements custom per-cpu stats. This patchset make blkcg core support both by default. - cfq-iosched and blk-throttle keep track of the same stats multiple times. Unify them" * 'for-4.3/blkcg' of git://git.kernel.dk/linux-block: (45 commits) blkcg: use CGROUP_WEIGHT_* scale for io.weight on the unified hierarchy blkcg: s/CFQ_WEIGHT_*/CFQ_WEIGHT_LEGACY_*/ blkcg: implement interface for the unified hierarchy blkcg: misc preparations for unified hierarchy interface blkcg: separate out tg_conf_updated() from tg_set_conf() blkcg: move body parsing from blkg_conf_prep() to its callers blkcg: mark existing cftypes as legacy blkcg: rename subsystem name from blkio to io blkcg: refine error codes returned during blkcg configuration blkcg: remove unnecessary NULL checks from __cfqg_set_weight_device() blkcg: reduce stack usage of blkg_rwstat_recursive_sum() blkcg: remove cfqg_stats->sectors blkcg: move io_service_bytes and io_serviced stats into blkcg_gq blkcg: make blkg_[rw]stat_recursive_sum() to be able to index into blkcg_gq blkcg: make blkcg_[rw]stat per-cpu blkcg: add blkg_[rw]stat->aux_cnt and replace cfq_group->dead_stats with it blkcg: consolidate blkg creation in blkcg_bio_issue_check() blk-throttle: improve queue bypass handling blkcg: move root blkg lookup optimization from throtl_lookup_tg() to __blkg_lookup() blkcg: inline [__]blkg_lookup() ... -
Ben Skeggs authored
Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Roy Spliet authored
Typo that snuck in with commit 6979c630Signed-off-by:
Roy Spliet <rspliet@eclipso.eu> Reported-by:
Pierre Moreau <pierre.morrow@free.fr> Signed-off-by:
-
Ilia Mirkin authored
Broken since "gr: convert user classes to new-style nvkm_object" Tested on a PPC64 G5 + NV34 Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Linus Torvalds authored
Merge third patch-bomb from Andrew Morton: - even more of the rest of MM - lib/ updates - checkpatch updates - small changes to a few scruffy filesystems - kmod fixes/cleanups - kexec updates - a dma-mapping cleanup series from hch * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (81 commits) dma-mapping: consolidate dma_set_mask dma-mapping: consolidate dma_supported dma-mapping: cosolidate dma_mapping_error dma-mapping: consolidate dma_{alloc,free}_noncoherent dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent} mm: use vma_is_anonymous() in create_huge_pmd() and wp_huge_pmd() mm: make sure all file VMAs have ->vm_ops set mm, mpx: add "vm_flags_t vm_flags" arg to do_mmap_pgoff() mm: mark most vm_operations_struct const namei: fix warning while make xmldocs caused by namei.c ipc: convert invalid scenarios to use WARN_ON zlib_deflate/deftree: remove bi_reverse() lib/decompress_unlzma: Do a NULL check for pointer lib/decompressors: use real out buf size for gunzip with kernel fs/affs: make root lookup from blkdev logical size sysctl: fix int -> unsigned long assignments in INT_MIN case kexec: export KERNEL_IMAGE_SIZE to vmcoreinfo kexec: align crash_notes allocation to make it be inside one physical page kexec: remove unnecessary test in kimage_alloc_crash_control_pages() kexec: split kexec_load syscall from kexec core code ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull late ARM SoC updates from Kevin Hilman: "This is a collection of a few late fixes and other misc stuff that had dependencies on things being merged from other trees. The bulk of the changes are for samsung/exynos SoCs for some changes that needed a few minor reworks so ended up a bit late. The others are mainly for qcom SoCs: a couple fixes and some DTS updates" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: multi_v7_defconfig: Enable PBIAS regulator soc: qcom: smd: Correct fBLOCKREADINTR handling soc: qcom: smd: Use correct remote processor ID soc: qcom: smem: Fix errant private access ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path ARM: dts: qcom: msm8960-cdp: Use stdout-path ARM: dts: qcom: msm8660-surf: Use stdout-path ARM: dts: qcom: ipq8064-ap148: Use stdout-path ARM: dts: qcom: apq8084-mtp: Use stdout-path ARM: dts: qcom: apq8084-ifc6540: Use stdout-path ARM: dts: qcom: apq8074-dragonboard: Use stdout-path ARM: dts: qcom: apq8064-ifc6410: Use stdout-path ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path ARM: dts: qcom: Label serial nodes for aliasing and stdout-path reset: ath79: Fix missing spin_lock_init reset: Add (devm_)reset_control_get stub functions ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12 cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o ARM: dts: add iommu property to JPEG device for exynos4 ARM: dts: enable SPI1 for exynos4412-odroidu3 ...
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
bunch of drm fixes. * tag 'topic/drm-fixes-2015-09-09' of git://anongit.freedesktop.org/drm-intel: drm/dp: Add dp_aux_i2c_speed_khz module param to set the assume i2c bus speed drm/dp: Adjust i2c-over-aux retry count based on message size and i2c bus speed drm/dp: Define AUX_RETRY_INTERVAL as 500 us drm/atomic: Fix bookkeeping with TEST_ONLY, v3.
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2015-09-10' of git://anongit.freedesktop.org/drm-intel into drm-next Fixes headed for v4.3-rc1, including Maarten's DP MST state checker fix you requested. * tag 'drm-intel-next-fixes-2015-09-10' of git://anongit.freedesktop.org/drm-intel: drm/i915: Allow DSI dual link to be configured on any pipe drm/i915: Don't try to use DDR DVFS on CHV when disabled in the BIOS drm/i915: Fix CSR MMIO address check drm/i915: Limit the number of loops for reading a split 64bit register drm/i915: Fix broken mst get_hw_state. drm/i915: Pass hpd_status_i915[] to intel_get_hpd_pins() in pre-g4x uapi/drm/i915_drm.h: fix userspace compilation. drm/i915: Always mark the object as dirty when used by the GPU
-
Jonathon Jongsma authored
Due to some recent changes in drm_helper_probe_single_connector_modes_merge_bits(), old custom modes were not being pruned properly. In current kernels, drm_mode_validate_basic() is called to sanity-check each mode in the list. If the sanity-check passes, the mode's status gets set to to MODE_OK. In older kernels this check was not done, so old custom modes would still have a status of MODE_UNVERIFIED at this point, and would therefore be pruned later in the function. As a result of this new behavior, the list of modes for a device always includes every custom mode ever configured for the device, with the largest one listed first. Since desktop environments usually choose the first preferred mode when a hotplug event is emitted, this had the result of making it very difficult for the user to reduce the size of the display. The qxl driver did implement the mode_valid connector function, but it was empty. In order to restore the old behavior where old custom modes are pruned, we implement a proper mode_valid function for the qxl driver. This function now checks each mode against the last configured custom mode and the list of standard modes. If the mode doesn't match any of these, its status is set to MODE_BAD so that it will be pruned as expected. Signed-off-by:
Jonathon Jongsma <jjongsma@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 10 Sep, 2015 7 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more kvm updates from Paolo Bonzini: "ARM: - Full debug support for arm64 - Active state switching for timer interrupts - Lazy FP/SIMD save/restore for arm64 - Generic ARMv8 target PPC: - Book3S: A few bug fixes - Book3S: Allow micro-threading on POWER8 x86: - Compiler warnings Generic: - Adaptive polling for guest halt" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (49 commits) kvm: irqchip: fix memory leak kvm: move new trace event outside #ifdef CONFIG_KVM_ASYNC_PF KVM: trace kvm_halt_poll_ns grow/shrink KVM: dynamic halt-polling KVM: make halt_poll_ns per-vCPU Silence compiler warning in arch/x86/kvm/emulate.c kvm: compile process_smi_save_seg_64() only for x86_64 KVM: x86: avoid uninitialized variable warning KVM: PPC: Book3S: Fix typo in top comment about locking KVM: PPC: Book3S: Fix size of the PSPB register KVM: PPC: Book3S HV: Exit on H_DOORBELL if HOST_IPI is set KVM: PPC: Book3S HV: Fix race in starting secondary threads KVM: PPC: Book3S: correct width in XER handling KVM: PPC: Book3S HV: Fix preempted vcore stolen time calculation KVM: PPC: Book3S HV: Fix preempted vcore list locking KVM: PPC: Book3S HV: Implement H_CLEAR_REF and H_CLEAR_MOD KVM: PPC: Book3S HV: Fix bug in dirty page tracking KVM: PPC: Book3S HV: Fix race in reading change bit when removing HPTE KVM: PPC: Book3S HV: Implement dynamic micro-threading on POWER8 KVM: PPC: Book3S HV: Make use of unused threads when running guests ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen terminology fixes from David Vrabel: "Use the correct GFN/BFN terms more consistently" * tag 'for-linus-4.3-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Rename the variable xen_store_mfn to xen_store_gfn xen/privcmd: Further s/MFN/GFN/ clean-up hvc/xen: Further s/MFN/GFN clean-up video/xen-fbfront: Further s/MFN/GFN clean-up xen/tmem: Use xen_page_to_gfn rather than pfn_to_gfn xen: Use correctly the Xen memory terminologies arm/xen: implement correctly pfn_to_mfn xen: Make clear that swiotlb and biomerge are dealing with DMA address
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze update from Michal Simek. * 'next' of git://git.monstr.eu/linux-2.6-microblaze: elf-em.h: move EM_MICROBLAZE to the common header
-
git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernelLinus Torvalds authored
Pull hexagon updates from Richard Kuo: "Just two fixes -- one for a uapi header and one for a timer interface" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: Revert "Hexagon: fix signal.c compile error" hexagon/time: Migrate to new 'set-state' interface
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix out-of-bounds array access in netfilter ipset, from Jozsef Kadlecsik. 2) Use correct free operation on netfilter conntrack templates, from Daniel Borkmann. 3) Fix route leak in SCTP, from Marcelo Ricardo Leitner. 4) Fix sizeof(pointer) in mac80211, from Thierry Reding. 5) Fix cache pointer comparison in ip6mr leading to missed unlock of mrt_lock. From Richard Laing. 6) rds_conn_lookup() needs to consider network namespace in key comparison, from Sowmini Varadhan. 7) Fix deadlock in TIPC code wrt broadcast link wakeups, from Kolmakov Dmitriy. 8) Fix fd leaks in bpf syscall, from Daniel Borkmann. 9) Fix error recovery when installing ipv6 multipath routes, we would delete the old route before we would know if we could fully commit to the new set of nexthops. Fix from Roopa Prabhu. 10) Fix run-time suspend problems in r8152, from Hayes Wang. 11) In fec, don't program the MAC address into the chip when the clocks are gated off. From Fugang Duan. 12) Fix poll behavior for netlink sockets when using rx ring mmap, from Daniel Borkmann. 13) Don't allocate memory with GFP_KERNEL from get_stats64 in r8169 driver, from Corinna Vinschen. 14) In TCP Cubic congestion control, handle idle periods better where we are application limited, in order to keep cwnd from growing out of control. From Eric Dumzet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) tcp_cubic: better follow cubic curve after idle period tcp: generate CA_EVENT_TX_START on data frames xen-netfront: respect user provided max_queues xen-netback: respect user provided max_queues r8169: Fix sleeping function called during get_stats64, v2 ether: add IEEE 1722 ethertype - TSN netlink, mmap: fix edge-case leakages in nf queue zero-copy netlink, mmap: don't walk rx ring on poll if receive queue non-empty cxgb4: changes for new firmware 1.14.4.0 net: fec: add netif status check before set mac address r8152: fix the runtime suspend issues r8152: split DRIVER_VERSION ipv6: fix ifnullfree.cocci warnings add microchip LAN88xx phy driver stmmac: fix check for phydev being open net: qlcnic: delete redundant memsets net: mv643xx_eth: use kzalloc net: jme: use kzalloc() instead of kmalloc+memset net: cavium: liquidio: use kzalloc in setup_glist() net: ipv6: use common fib_default_rule_pref ... -
Christoph Hellwig authored
Almost everyone implements dma_set_mask the same way, although some time that's hidden in ->set_dma_mask methods. This patch consolidates those into a common implementation that either calls ->set_dma_mask if present or otherwise uses the default implementation. Some architectures used to only call ->set_dma_mask after the initial checks, and those instance have been fixed to do the full work. h8300 implemented dma_set_mask bogusly as a no-ops and has been fixed. Unfortunately some architectures overload unrelated semantics like changing the dma_ops into it so we still need to allow for an architecture override for now. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
Most architectures just call into ->dma_supported, but some also return 1 if the method is not present, or 0 if no dma ops are present (although that should never happeb). Consolidate this more broad version into common code. Also fix h8300 which inorrectly always returned 0, which would have been a problem if it's dma_set_mask implementation wasn't a similarly buggy noop. As a few architectures have much more elaborate implementations, we still allow for arch overrides. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by:
-
