- 11 Jun, 2017 23 commits
-
-
Benjamin Gaignard authored
Devices, like stm32 timer, could be triggered by hardware events which are not buffer or software events. However it could be necessary to validate the triggers like it is done for buffer or event triggered modes. This patch add a new INDIO_HARDWARE_TRIGGERED operating mode for this kind of devices and allow this mode to register trigger consumer. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Arvind Yadav authored
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by:
Rick Altherr <raltherr@google.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Hans de Goede authored
This reverts commit f1320b09. The BMA250E is already handled by the bmc150-accel-i2c driver, which supports the "E" variants of the BMA??? accelerometers better then the bma180 driver. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Hans de Goede authored
This reverts commit 5333e886. The BMA250E is already handled by the bmc150-accel-i2c driver, which supports the "E" variants of the BMA??? accelerometers better then the bma180 driver. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Remove LSM303DLHC, LSM303DLM from st_magn_id_table since LSM303DL series does not support spi interface Fixes: 872e79ad (iio: magn: Add STMicroelectronics magn driver) Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Remove LSM303DL, LSM303DLM, LSM303DLH, LSM303DLHC from st_accel_id_table since LSM303DL series does not support spi interface Fixes: d6251168 (iio: accel: Add STMicroelectronics accel driver) Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Jean-Baptiste Maneyrol authored
Signed-off-by:
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Jean-Baptiste Maneyrol authored
There are several locks issues when using buffer and direct polling data at the same time. Use our own mutex for managing locking and block simultaneous use of buffer and direct polling by using iio_device_{claim/release}_direct_mode. This makes chip_config enable bit obsolete, so delete it. Signed-off-by:
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Update st_lsm6dsx device binding with active-low interrupts support (IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING). Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Add support for active low interrupts (IRQF_TRIGGER_LOW and IRQF_TRIGGER_FALLING). Configure the device as active high or low according to the requested irq line. Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Andy Shevchenko authored
Use sysfs_match_string() helper instead of open coded variant. Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Andy Shevchenko authored
Use __sysfs_match_string() helper instead of open coded variant. Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Andy Shevchenko authored
Since index is always 0 replace devm_gpiod_get_index() by devm_gpiod_get(). Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Sebastian Reichel authored
twl4030-madc.h is no longer used by anything outside of the iio driver, so it can be merged into the driver. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Sebastian Reichel authored
This functionality is not used by the IIO subsystem. Due to removal of legacy API it can also be removed. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Sebastian Reichel authored
This struct is no longer used by anything in the kernel. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Sebastian Reichel authored
All madc users have been converted to IIO API, so drop the legacy API. The function is still used inside of the driver. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Sebastian Reichel authored
Drop legacy twl4030_get_madc_conversion() method. It has been used by drivers to get madc data before it conversion to IIO API. There are no users in the mainline kernel anymore. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Fabrice Gasnier authored
Add support for STM32H7 Analog to Digital Converter. It has up to 20 external channels, resolution ranges from 8 to 16bits. Either bus or asynchronous adc clock may be used. Add registers & bitfields definition. Also add new configuration options to enter/exit powerdown and perform self-calibration. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Fabrice Gasnier authored
STM32F4 requires one clock per ADC instance for register access. But, newer version of ADC hardware block have common bus clock for all instances (per instance driver isn't responsible for getting it). So, make it optional by default. Still, enforce it's required on STM32F4. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Fabrice Gasnier authored
Prepare support for stm32h7 adc variant by introducing compatible configuration data. Move STM32F4 specific stuff to compatible data structure: - registers & bit fields - input channels data - start/stop procedures - trigger definitions Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Fabrice Gasnier authored
Analog clock input is mandatory on stm32f4. But newer version of ADC hardware block allow to select either bus clock or asynchronous clock, for analog circuitry. So, make it optional by default, but enforce clk presence on stm32f4. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Fabrice Gasnier authored
Document support for STM32H7 Analog to Digital Converter. Main difference is regarding compatible, clock definitions and new features like differential channels support: STM32H7 ADC block has two clock inputs, common clock for all ADCs. One 'bus' clock for registers access, and one optional 'adc' clock for analog circuitry (bus clock may be used for conversions). Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
- 03 Jun, 2017 12 commits
-
-
Stefan Brüns authored
INA226/230/231 has integration times per voltage channel and common averaging setting for both channels, while the INA219/220 only has a combined integration time/averaging setting per channel. Only expose the averaging attribute for the INA226, and expose the correct integration times for the INA219. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Paolo Cretaro authored
Fix sparse warning: Using plain integer as NULL pointer Signed-off-by:
Paolo Cretaro <paolocretaro@gmail.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Arvind Yadav authored
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Paolo Cretaro authored
Fix sparse warning "symbol foo was not declared. Should it be static?" for the following symbols: mx23_lradc_adc_irq_names mx28_lradc_adc_irq_names iio_dev_attr_in_voltage0_scale_available iio_dev_attr_in_voltage1_scale_available iio_dev_attr_in_voltage2_scale_available iio_dev_attr_in_voltage3_scale_available iio_dev_attr_in_voltage4_scale_available iio_dev_attr_in_voltage5_scale_available iio_dev_attr_in_voltage6_scale_available iio_dev_attr_in_voltage7_scale_available iio_dev_attr_in_voltage10_scale_available iio_dev_attr_in_voltage11_scale_available iio_dev_attr_in_voltage12_scale_available iio_dev_attr_in_voltage13_scale_available iio_dev_attr_in_voltage14_scale_available iio_dev_attr_in_voltage15_scale_available Signed-off-by:
Paolo Cretaro <paolocretaro@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Jonathan Cameron authored
This reverts commit 61305664. This commit was applied prematurely and will break some existing situations where the signal is inverted as part of voltage level conversions. Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Arvind Yadav authored
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Wolfram Sang authored
It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Stefan Brüns authored
Flags for shared channel attributes should be set on all channels of a channel set. I.e. SAMP_FREQUENCY and OVERSAMPLING_RATIO are set on the in_voltage{0,1} channels, thus should be set on in_power, in_current. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Nikita Yushchenko authored
C syntax allows apersands when initializing structures fields with function pointers, but in Linux sources ampersands are normally not used in thix context. Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Tony Lindgren authored
This is no longer needed as the real problem was interrupt flags not getting passed properly from device tree to the cpcap-core.c mfd driver. This got fixed with commit ac894732 ("mfd: cpcap: Fix interrupt to use level interrupt") So let's remove ADC interrupt specific the quirk. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Reviewed-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Tony Lindgren authored
It seems that "MC13783 Power Management and Audio Ciruit User's Guide" MC1378UG.pdf documents several similar components as in the CPCAP PMIC. Chapter "9.5.5 Die Temperature and UID" says that the die temperature value is 282 at 25C with LSB of -1.14C. Converting CPCAP PMIC channel3 values with following seems to produce values that make sense for a PMIC die: temperature = 25000 + ((regval - 282) * 114) As we don't have any other documentation, let's assume the die temperature is unconfigured in the Motorola mapphone Linux kernel and the current temperature conversion table should be only used for the battery thermistor and not for the die temperature. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Tony Lindgren authored
Looking at the register dumps from Android kernel on droid 4, I noticed the values with the mainline kernel don't match. Let's fix this by initializing the ADC registers to what Android does. For getting correct values from the battery thermistor, we need to toggle the CPCAP_BIT_THERMBIAS_EN when measuring battery temperature to get correct battery temperatures. And looks like we also need to wait a little bit before reading the battery temperature as otherwise the results are inaccurate. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
- 29 May, 2017 5 commits
-
-
Stefan Wahren authored
This replaces all remaining BUG_ON with WARN_ON. So in case of a VCHIQ bug the system is still usable. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Wahren authored
Properly handle the error case in case of an invalid tx_pos. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Wahren authored
Bail out properly if the process index doesn't match the remote insert. We also drop the BUG in case the process index is at local insert, so we can trigger the WARN_ON again some steps later. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Wahren authored
If the ref counter of service has an unexpected value then we better bail out. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Wahren authored
In the unlikely case that service is NULL we should bail out instead of calling BUG_ON(). The other BUG_ON calls will be fixed in separate patches. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-