of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Caching the lock pointer avoids having to hash on the object
again to unlock the bucket locks.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changes in tcp_metric hash table are protected by tcp_metrics_lock
only, not by genl_mutex

While we are at it use deref_locked() instead of rcu_dereference()
in tcp_new() to avoid unnecessary barrier, as we hold tcp_metrics_lock
as well.
Reported-by: Andrew Vagin <avagin@parallels.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 098a697b ("tcp_metrics: Use a single hash table for all network namespaces.")
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This would fix randconfig compile error:
net/built-in.o: In function `netdev_switch_fib_ipv4_abort':
(.text+0xf7811): undefined reference to `fib_flush_external'

Also it fixes following warnings:
warning: (NET_DSA) selects NET_SWITCHDEV which has unmet direct dependencies (NET && INET)

warning: (NET_DSA_MV88E6060 && NET_DSA_MV88E6131 && NET_DSA_MV88E6123_61_65 && NET_DSA_MV88E6171 && NET_DSA_MV88E6352 && NET_DSA_BCM_SF2) selects NET_DSA which has unmet direct dependencies (NET && HAVE_NET_DSA && NET_SWITCHDEV)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

MDIO controller on little endian Socs, e.g. ls2085a is similar to the
controller on big endian Socs, but the MDIO access is little endian,
we use I/O accessor function to handle endianness, so the driver can
run on little endian Socs. A property "little-endian" is used
in DTS to indicate the MDIO is little endian, if driver probes the
property, driver will access MDIO in little endian, otherwise, driver
works in big endian by default.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a bug in xgmac_wait_until_done() which mdio_stat should be used
instead of mdio_data when checking if busy bit is cleared.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Creating a kernel socket with sock_create_kern() happens in "init_net"
namespace, however, releasing it with sk_release_kernel() occurs in
the current namespace which may be different with "init_net" namespace.
Therefore, we should guarantee that the namespace in which a kernel
socket is created is same as the socket is created.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

lib/rhashtable.c:767:5: warning: context imbalance in 'rhashtable_walk_start' - wrong count at exit
lib/rhashtable.c:849:6: warning: context imbalance in 'rhashtable_walk_stop' - unexpected unlock

Fixes: f2dba9c6 ("rhashtable: Introduce rhashtable_walk_*")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

In hast to fix some sparse warning, I hard-coded a fix-sized array on the stack
which is probably too big for kernel standards.  Fix this by converting array
to dynamic allocation.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: tcp listener refactoring, part 10

We are getting close to the point where request sockets will be hashed
into generic hash table. Some followups are needed for netfilter and
will be handled in next patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

reqsk_put() is the generic function that should be used
to release a refcount (and automatically call reqsk_free())

reqsk_free() might be called if refcount is known to be 0
or undefined.

refcnt is set to one in inet_csk_reqsk_queue_add()

As request socks are not yet in global ehash table,
I added temporary debugging checks in reqsk_put() and reqsk_free()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sock_edemux() is not used in fast path, and should
really call sock_gen_put() to save some code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet_diag_fill_req() is renamed to inet_req_diag_fill()
and moved up, so that it can be called fom sk_diag_fill()

inet_diag_bc_sk() is ready to handle request socks.

inet_twsk_diag_dump() is no longer needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a request socket is created, we do not cache ip route
dst entry, like for timewait sockets.

Let's use sk_fullsock() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have many places where we want to check if a socket is
not a timewait or request socket. Use a helper to avoid
hard coding this.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Scott Feldman says:

====================
switchdev: add swdev ops

v3:

 - Fix missing include for DSA build

v2:

 - Per Simon's review, squash some of the dependent commits into one to
   make series git bisect safe.

v1:

Per discussions at netconf, move switchdev ndo ops to a new swdev_ops to
keep ndo namespace clean and maintain switchdev-related ops into one place.

There are no functional changes here; just shuffling ops around for better
organization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move swdev wrappers over to new swdev ops (from previous ndo ops).  No
functional changes to the implementation.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>

rocker: move to new swdev ops
Signed-off-by: Scott Feldman <sfeldma@gmail.com>

dsa: move to new swdev ops
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As discussed at netconf, introduce swdev_ops as first step to move switchdev
ops from ndo to swdev.  This will keep switchdev from cluttering up ndo ops
space.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Herbert Xu says:

====================
rhashtable: Fix two bugs caused by multiple rehash preparation

While testing some new patches over the weekend I discovered a
couple of bugs in the series that had just been merged.  These
two patches fix them:

1) A use-after-free in the walker that can cause crashes when
walking during a rehash.

2) When a second rehash starts during a single rhashtable_remove
call the remove may fail when it shouldn't.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 9d901bc0 ("rhashtable:
Free bucket tables asynchronously after rehash") causes gratuitous
failures in rhashtable_remove.

The reason is that it inadvertently introduced multiple rehashing
from the perspective of readers.  IOW it is now possible to see
more than two tables during a single RCU critical section.

Fortunately the other reader rhashtable_lookup already deals with
this correctly thanks to c4db8848
("rhashtable: rhashtable: Move future_tbl into struct bucket_table")
so only rhashtable_remove is broken by this change.

This patch fixes this by looping over every table from the first
one to the last or until we find the element that we were trying
to delete.

Incidentally the simple test for detecting rehashing to prevent
starting another shrinking no longer works.  Since it isn't needed
anyway (the work queue and the mutex serves as a natural barrier
to unnecessary rehashes) I've simply killed the test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit c4db8848 ("rhashtable:
Move future_tbl into struct bucket_table") introduced a use-after-
free bug in rhashtable_walk_stop because it dereferences tbl after
droping the RCU read lock.

This patch fixes it by moving the RCU read unlock down to the bottom
of rhashtable_walk_stop.  In fact this was how I had it originally
but it got dropped while rearranging patches because this one
depended on the async freeing of bucket_table.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for Hardware Filter Block (HFB) so that incoming Rx traffic
can be matched and directed to desired Rx queues.
Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
bpf: allow eBPF access skb fields

V1->V2:
- refactored field access converter into common helper convert_skb_access()
  used in both classic and extended BPF
- added missing build_bug_on for field 'len'
- added comment to uapi/linux/bpf.h as suggested by Daniel
- dropped exposing 'ifindex' field for now

classic BPF has a way to access skb fields, whereas extended BPF didn't.
This patch introduces this ability.

Classic BPF can access fields via negative SKF_AD_OFF offset.
Positive bpf_ld_abs N is treated as load from packet, whereas
bpf_ld_abs -0x1000 + N is treated as skb fields access.
Many offsets were hard coded over years: SKF_AD_PROTOCOL, SKF_AD_PKTTYPE, etc.
The problem with this approach was that for every new field classic bpf
assembler had to be tweaked.

I've considered doing the same for extended, but for every new field LLVM
compiler would have to be modifed. Since it would need to add a new intrinsic.
It could be done with single intrinsic and magic offset or use of inline
assembler, but neither are clean from compiler backend point of view, since
they look like calls but shouldn't scratch caller-saved registers.

Another approach was to introduce a new helper functions like bpf_get_pkt_type()
for every field that we want to access, but that is equally ugly for kernel
and slow, since helpers are calls and they are slower then just loads.
In theory helper calls can be 'inlined' inside kernel into direct loads, but
since they were calls for user space, compiler would have to spill registers
around such calls anyway. Teaching compiler to treat such helpers differently
is even uglier.

They were few other ideas considered. At the end the best seems to be to
introduce a user accessible mirror of in-kernel sk_buff structure:

struct __sk_buff {
    __u32 len;
    __u32 pkt_type;
    __u32 mark;
    __u32 queue_mapping;
};

bpf programs will do:

int bpf_prog1(struct __sk_buff *skb)
{
    __u32 var = skb->pkt_type;

which will be compiled to bpf assembler as:

dst_reg = *(u32 *)(src_reg + 4) // 4 == offsetof(struct __sk_buff, pkt_type)

bpf verifier will check validity of access and will convert it to:

dst_reg = *(u8 *)(src_reg + offsetof(struct sk_buff, __pkt_type_offset))
dst_reg &= 7

since 'pkt_type' is a bitfield.

No new instructions added. LLVM doesn't need to be modified.
JITs don't change and verifier already knows when it accesses 'ctx' pointer.
The only thing needed was to convert user visible offset within __sk_buff
to kernel internal offset within sk_buff.
For 'len' and other fields conversion is trivial.
Converting 'pkt_type' takes 2 or 3 instructions depending on endianness.
More fields can be exposed by adding to the end of the 'struct __sk_buff'.
Like vlan_tci and others can be added later.

When pkt_type field is moved around, goes into different structure, removed or
its size changes, the function convert_skb_access() would need to updated and
it will cover both classic and extended.

Patch 2 updates examples to demonstrates how fields are accessed and
adds new tests for verifier, since it needs to detect a corner case when
attacker is using single bpf instruction in two branches with different
register types.

The 4 fields of __sk_buff are already exposed to user space via classic bpf and
I believe they're useful in extended as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

- modify sockex1 example to count number of bytes in outgoing packets
- modify sockex2 example to count number of bytes and packets per flow
- add 4 stress tests that exercise 'skb->field' code path of verifier
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

introduce user accessible mirror of in-kernel 'struct sk_buff':
struct __sk_buff {
    __u32 len;
    __u32 pkt_type;
    __u32 mark;
    __u32 queue_mapping;
};

bpf programs can do:

int bpf_prog(struct __sk_buff *skb)
{
    __u32 var = skb->pkt_type;

which will be compiled to bpf assembler as:

dst_reg = *(u32 *)(src_reg + 4) // 4 == offsetof(struct __sk_buff, pkt_type)

bpf verifier will check validity of access and will convert it to:

dst_reg = *(u8 *)(src_reg + offsetof(struct sk_buff, __pkt_type_offset))
dst_reg &= 7

since skb->pkt_type is a bitfield.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
eBPF updates

Two small eBPF helper additions to better match up with ancillary
classic BPF functionality.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the possibility to obtain raw_smp_processor_id() in
eBPF. Currently, this is only possible in classic BPF where commit
da2033c2 ("filter: add SKF_AD_RXHASH and SKF_AD_CPU") has added
facilities for this.

Perhaps most importantly, this would also allow us to track per CPU
statistics with eBPF maps, or to implement a poor-man's per CPU data
structure through eBPF maps.

Example function proto-type looks like:

  u32 (*smp_processor_id)(void) = (void *)BPF_FUNC_get_smp_processor_id;
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This work is similar to commit 4cd3675e ("filter: added BPF
random opcode") and adds a possibility for packet sampling in eBPF.

Currently, this is only possible in classic BPF and useful to
combine sampling with f.e. packet sockets, possible also with tc.

Example function proto-type looks like:

  u32 (*prandom_u32)(void) = (void *)BPF_FUNC_get_prandom_u32;
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Claudiu Manoil says:

====================
gianfar: ARM port driver updates (2/2)

The 2nd round of driver updates to make gianfar portable on ARM,
for the ARM based SoC that integrates eTSEC - "ls1021a".
The patches address the bulk of remaining endianess issues -
handling DMA fields (BD and FCB), and device tree properties.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>