No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Ungerer <gerg@uclinux.org>

No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tony Luck <tony.luck@intel.com>

No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Howells <dhowells@redhat.com>

No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Henderson <rth@twiddle.net>

All architectures are finally converted. Remove the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>

Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as
we have converted all irq_chip functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chip to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

The irq descriptors are already initialized by the generic
code. Remove the redundant init code and set the irq chip with the
proper accessor function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as
we have converted all irq_chip functions. Fix the fallout in
show_interrupts().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mikael Starvik <starvik@axis.com>

Convert the irq chip functions and install handle_simple_irq for each
interrupt to get rid of __do_IRQ()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mikael Starvik <starvik@axis.com>

Convert the irq_chip functions and install handle_simple_irq for each
interrupt. This converts V10 to the flow handling and lets us remove
__do_IRQ().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mikael Starvik <starvik@axis.com>

Use the wrapper around __do_IRQ() so we can convert V10 and V32
seperately.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mikael Starvik <starvik@axis.com>

Switch to the generic irq Kconfig. h8300 has all irq chips converted
to the new functions, so select the GENERIC_HARDIRQS_NO_DEPRECATED
switch as well. Fixup the resulting fallout in show_interrupts().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Paul Mundt <lethal@linux-sh.org>

__do_IRQ is deprecated so h8300 needs to be converted to proper flow
handling. The irq chip is simple and does not required any
mask/ack/eoi functions, so we can use handle_simple_irq.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Paul Mundt <lethal@linux-sh.org>

No functional change, just straight forward conversion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Paul Mundt <lethal@linux-sh.org>

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  smp: Allow on_each_cpu() to be called while early_boot_irqs_disabled status to init/main.c
  lockdep: Move early boot local IRQ enable/disable status to init/main.c

It turns out that some device drivers map pages from the ACPI NVS region
during resume using ioremap(), which conflicts with ioremap_cache() used
for mapping those pages by the NVS save/restore code in nvs.c.

Make the NVS pages mapped by the code in nvs.c be unmapped before device
drivers' resume routines run.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit ca9b600b ("ACPI / PM: Make suspend_nvs_save() use
acpi_os_map_memory()") attempted to prevent the code in osl.c and nvs.c
from using different ioremap() variants by making the latter use
acpi_os_map_memory() for mapping the NVS pages.  However, that also
requires acpi_os_unmap_memory() to be used for unmapping them, which
causes synchronize_rcu() to be executed many times in a row
unnecessarily and introduces substantial delays during resume on some
systems.

Instead of using acpi_os_map_memory() for mapping the NVS pages in nvs.c
introduce acpi_os_ioremap() calling ioremap_cache() and make the code in
both osl.c and nvs.c use it.
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* akpm:
  kernel/smp.c: consolidate writes in smp_call_function_interrupt()
  kernel/smp.c: fix smp_call_function_many() SMP race
  memcg: correctly order reading PCG_USED and pc->mem_cgroup
  backlight: fix 88pm860x_bl macro collision
  drivers/leds/ledtrig-gpio.c: make output match input, tighten input checking
  MAINTAINERS: update Atmel AT91 entry
  mm: fix truncate_setsize() comment
  memcg: fix rmdir, force_empty with THP
  memcg: fix LRU accounting with THP
  memcg: fix USED bit handling at uncharge in THP
  memcg: modify accounting function for supporting THP better
  fs/direct-io.c: don't try to allocate more than BIO_MAX_PAGES in a bio
  mm: compaction: prevent division-by-zero during user-requested compaction
  mm/vmscan.c: remove duplicate include of compaction.h
  memblock: fix memblock_is_region_memory()
  thp: keep highpte mapped until it is no longer needed
  kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT

We have to test the cpu mask in the interrupt handler before checking the
refs, otherwise we can start to follow an entry before its deleted and
find it partially initailzed for the next trip.  Presently we also clear
the cpumask bit before executing the called function, which implies
getting write access to the line.  After the function is called we then
decrement refs, and if they go to zero we then unlock the structure.

However, this implies getting write access to the call function data
before and after another the function is called.  If we can assert that no
smp_call_function execution function is allowed to enable interrupts, then
we can move both writes to after the function is called, hopfully allowing
both writes with one cache line bounce.

On a 256 thread system with a kernel compiled for 1024 threads, the time
to execute testcase in the "smp_call_function_many race" changelog was
reduced by about 30-40ms out of about 545 ms.

I decided to keep this as WARN because its now a buggy function, even
though the stack trace is of no value -- a simple printk would give us the
information needed.

Raw data:

Without patch:
  ipi_test startup took 1219366ns complete 539819014ns total 541038380ns
  ipi_test startup took 1695754ns complete 543439872ns total 545135626ns
  ipi_test startup took 7513568ns complete 539606362ns total 547119930ns
  ipi_test startup took 13304064ns complete 533898562ns total 547202626ns
  ipi_test startup took 8668192ns complete 544264074ns total 552932266ns
  ipi_test startup took 4977626ns complete 548862684ns total 553840310ns
  ipi_test startup took 2144486ns complete 541292318ns total 543436804ns
  ipi_test startup took 21245824ns complete 530280180ns total 551526004ns

With patch:
  ipi_test startup took 5961748ns complete 500859628ns total 506821376ns
  ipi_test startup took 8975996ns complete 495098924ns total 504074920ns
  ipi_test startup took 19797750ns complete 492204740ns total 512002490ns
  ipi_test startup took 14824796ns complete 487495878ns total 502320674ns
  ipi_test startup took 11514882ns complete 494439372ns total 505954254ns
  ipi_test startup took 8288084ns complete 502570774ns total 510858858ns
  ipi_test startup took 6789954ns complete 493388112ns total 500178066ns

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/sched.h> /* sched clock */

	#define ITERATIONS 100

	static void do_nothing_ipi(void *dummy)
	{
	}

	static void do_ipis(struct work_struct *dummy)
	{
		int i;

		for (i = 0; i < ITERATIONS; i++)
			smp_call_function(do_nothing_ipi, NULL, 1);

		printk(KERN_DEBUG "cpu %d finished\n", smp_processor_id());
	}

	static struct work_struct work[NR_CPUS];

	static int __init testcase_init(void)
	{
		int cpu;
		u64 start, started, done;

		start = local_clock();
		for_each_online_cpu(cpu) {
			INIT_WORK(&work[cpu], do_ipis);
			schedule_work_on(cpu, &work[cpu]);
		}
		started = local_clock();
		for_each_online_cpu(cpu)
			flush_work(&work[cpu]);
		done = local_clock();
		pr_info("ipi_test startup took %lldns complete %lldns total %lldns\n",
			started-start, done-started, done-start);

		return 0;
	}

	static void __exit testcase_exit(void)
	{
	}

	module_init(testcase_init)
	module_exit(testcase_exit)
	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Anton Blanchard");
Signed-off-by: Milton Miller <miltonm@bga.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I noticed a failure where we hit the following WARN_ON in
generic_smp_call_function_interrupt:

                if (!cpumask_test_and_clear_cpu(cpu, data->cpumask))
                        continue;

                data->csd.func(data->csd.info);

                refs = atomic_dec_return(&data->refs);
                WARN_ON(refs < 0);      <-------------------------

We atomically tested and cleared our bit in the cpumask, and yet the
number of cpus left (ie refs) was 0.  How can this be?

It turns out commit 54fdade1
("generic-ipi: make struct call_function_data lockless") is at fault.  It
removes locking from smp_call_function_many and in doing so creates a
rather complicated race.

The problem comes about because:

 - The smp_call_function_many interrupt handler walks call_function.queue
   without any locking.
 - We reuse a percpu data structure in smp_call_function_many.
 - We do not wait for any RCU grace period before starting the next
   smp_call_function_many.

Imagine a scenario where CPU A does two smp_call_functions back to back,
and CPU B does an smp_call_function in between.  We concentrate on how CPU
C handles the calls:

CPU A            CPU B                  CPU C              CPU D

smp_call_function
                                        smp_call_function_interrupt
                                            walks
					call_function.queue sees
					data from CPU A on list

                 smp_call_function

                                        smp_call_function_interrupt
                                            walks

                                        call_function.queue sees
                                          (stale) CPU A on list
							   smp_call_function int
							   clears last ref on A
							   list_del_rcu, unlock
smp_call_function reuses
percpu *data A
                                         data->cpumask sees and
                                         clears bit in cpumask
                                         might be using old or new fn!
                                         decrements refs below 0

set data->refs (too late!)

The important thing to note is since the interrupt handler walks a
potentially stale call_function.queue without any locking, then another
cpu can view the percpu *data structure at any time, even when the owner
is in the process of initialising it.

The following test case hits the WARN_ON 100% of the time on my PowerPC
box (having 128 threads does help :)

#include <linux/module.h>
#include <linux/init.h>

#define ITERATIONS 100

static void do_nothing_ipi(void *dummy)
{
}

static void do_ipis(struct work_struct *dummy)
{
	int i;

	for (i = 0; i < ITERATIONS; i++)
		smp_call_function(do_nothing_ipi, NULL, 1);

	printk(KERN_DEBUG "cpu %d finished\n", smp_processor_id());
}

static struct work_struct work[NR_CPUS];

static int __init testcase_init(void)
{
	int cpu;

	for_each_online_cpu(cpu) {
		INIT_WORK(&work[cpu], do_ipis);
		schedule_work_on(cpu, &work[cpu]);
	}

	return 0;
}

static void __exit testcase_exit(void)
{
}

module_init(testcase_init)
module_exit(testcase_exit)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Anton Blanchard");

I tried to fix it by ordering the read and the write of ->cpumask and
->refs.  In doing so I missed a critical case but Paul McKenney was able
to spot my bug thankfully :) To ensure we arent viewing previous
iterations the interrupt handler needs to read ->refs then ->cpumask then
->refs _again_.

Thanks to Milton Miller and Paul McKenney for helping to debug this issue.

[miltonm@bga.com: add WARN_ON and BUG_ON, remove extra read of refs before initial read of mask that doesn't help (also noted by Peter Zijlstra), adjust comments, hopefully clarify scenario ]
[miltonm@bga.com: remove excess tests]
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Milton Miller <miltonm@bga.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: <stable@kernel.org> [2.6.32+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The placement of the read-side barrier is confused: the writer first
sets pc->mem_cgroup, then PCG_USED.  The read-side barrier has to be
between testing PCG_USED and reading pc->mem_cgroup.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix collision with kernel-supplied #define:

  drivers/video/backlight/88pm860x_bl.c:24:1: warning: "CURRENT_MASK" redefined
  arch/x86/include/asm/page_64_types.h:6:1: warning: this is the location of the previous definition
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replicate changes made to drivers/leds/ledtrig-backlight.c.

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add two co-maintainers and update the entry with new information.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Contrary to what the comment says, truncate_setsize() should be called
*before* filesystem truncated blocks.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>