- 28 Apr, 2016 5 commits
-
-
Chris Wilson authored
The ioremap() hidden behind the io_mapping_map_wc() convenience helper can be used for remapping multiple pages. Extend the helper so that future callers can use it for larger ranges. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: netdev@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by:
Luis R. Rodriguez <mcgrof@kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-3-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
When setting up the overlay page, we pin it into the GGTT (when using virtual addresses) and store the offset as overlay->flip_addr. Rather than doing a lookup of the GGTT address everytime, we can use the known address instead. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-2-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
When releasing the intel_fbdev, we should unpin the framebuffer that we pinned during construction. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-1-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
Propagate the real error from drm_gem_object_init(). Note this also fixes some confusion in the error return from i915_gem_alloc_object... v2: (Matthew Auld) - updated new users of gem_alloc_object from latest drm-nightly - replaced occurrences of IS_ERR_OR_NULL() with IS_ERR() v3: (Joonas Lahtinen) - fix double "From:" in commit message - add goto teardown path v4: (Matthew Auld) - rebase with i915_gem_alloc_object name change Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461587533-8841-1-git-send-email-matthew.auld@intel.com [Joonas: Removed spurious " = NULL" from _init() function] Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
Faced with sporadic machine hangs on gen7, that mimic the issue of concurrent writes to the same cacheline and seem to start with commit 9b9ed309 (drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+), let us restore the spinlock around the mmio read. Fixes: 9b9ed309 (drm/i915: Remove forcewake dance from seqno/irq...) Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461744121-27051-1-git-send-email-chris@chris-wilson.co.ukTested-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
- 27 Apr, 2016 5 commits
-
-
Ville Syrjälä authored
I just noticed that VLV/CHV have a RAWCLK_FREQ register just like PCH platforms. It lives in the display power well, so we should update it when enabling the power well. Interestingly the BIOS seems to leave it at the reset value (125) which doesn't match the rawclk frequency on VLV/CHV (200 MHz). As always with these register, the spec is extremely vague what the register does. All it says is: "This is used to generate a divided down clock for miscellaneous timers in display." Based on a quick test, at least AUX and PWM appear to be unaffected by this. But since the register is there, let's configure it in accordance with the spec. Note that we have to move intel_update_rawclk() to occur before we touch the power wells, so that the dev_priv->rawclk_freq is already populated when the disp2 enable hook gets called for the first time. I think this should be safe to do on other platforms as well. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461768202-17544-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ville Syrjälä authored
Check for VLV/CHV instead if !BXT when re-enabling DPOunit clock gating after DSI disable. That's what we checked when disabling the clock gating when enabling DSI. Also use the same temporary variable name in both cases, and toss in a bit of dev vs. dev_priv cleanup while at it. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460996305-30453-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
Matthew Auld authored
Prefer a goto teardown path to do all the required cleanup. v2: (Joonas Lahtinen) - remove NULL assignments - rename goto labels Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461759565-12086-1-git-send-email-matthew.auld@intel.com
-
Jani Nikula authored
Add support for CHV gpio programming in DSI gpio elements. v2: Overhaul macros according to Ville's review. v3: Address Ville's review: - swap E and SE gpio ranges - add a note about max SE index - use GPO, not HIZ - swap cfg0 and cfg1 v4: fix port for dsi sequence versions 1 and 2 [Rewritten by Jani, based on earlier work by Yogesh and Deepak.] Signed-off-by:
Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com> Signed-off-by:
Deepak M <m.deepak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/bdaaf9915a5005305b31bb26cf619a5a82472f2a.1461666263.git.jani.nikula@intel.com
-
Jani Nikula authored
Only support North Core (NC) GPIOs for now, and assume the vlv gpio table only has NC GPIOs for now. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/d51c9479e8ef0b201452086870e7785928a86289.1461666263.git.jani.nikula@intel.com
-
- 26 Apr, 2016 5 commits
-
-
Deepak M authored
For dual link panel scenarios there are new fields added in the VBT which indicate on which port the PWM cntrl and CABC ON/OFF commands needs to be sent. v2: Moving the comment to intel_dsi.h(Jani) v3: Renaming the field names (Jani) v4 by Jani: make this patch only about VBT Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by:
Deepak M <m.deepak@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459346623-30752-2-git-send-email-jani.nikula@intel.com
-
Yetunde Adebisi authored
This patch adds support for eDP backlight control using DPCD registers to backlight hooks in intel_panel. It checks for backlight control over AUX channel capability and sets up function pointers to get and set the backlight brightness level if supported. v2: Moved backlight functions from intel_dp.c into a new file intel_dp_aux_backlight.c. Also moved reading of eDP display control registers to intel_dp_get_dpcd v3: Correct some formatting mistakes v4: Updated to use AUX backlight control if PWM control is not possible (Jani) v5: Moved call to initialize backlight registers to dp_aux_setup_backlight v6: Check DP_EDP_BACKLIGHT_PIN_ENABLE_CAP is disabled before setting up AUX backlight control. To fix BLM_PWM_ENABLE igt test warnings on bdw_ultra v7: Add enable_dpcd_backlight module parameter. v8: Rebase onto latest drm-intel-nightly branch v9: Remove changes to intel_dp_dpcd_read_wake Split addition edp_dpcd variable into a separate patch Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Yetunde Adebisi <yetundex.adebisi@intel.com> [Jani: whitepace changes to appease checkpatch] Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459865452-9138-4-git-send-email-yetundex.adebisi@intel.com
-
Yetunde Adebisi authored
Add new edp_dpcd variable to intel_dp. Read and save eDP Display control capability registers to edp_dpcd. Signed-off-by:
Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459865452-9138-3-git-send-email-yetundex.adebisi@intel.com
-
Yetunde Adebisi authored
This is used when reading Display Control capability Registers on the sink device. cc: dri-devel@lists.freedesktop.org Signed-off-by:
Yetunde Adebisi <yetundex.adebisi@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459865452-9138-2-git-send-email-yetundex.adebisi@intel.com
-
Jani Nikula authored
False ideas introduced in commit 1d96a4a8 Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Mar 18 13:11:10 2016 +0200 drm/i915/dsi: add support for DSI sequence block v2 gpio element Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/5264e2f796c4bdc4128cff5a5e245da3038bf1b3.1460039033.git.jani.nikula@intel.com
-
- 25 Apr, 2016 9 commits
-
-
Tvrtko Ursulin authored
Can use the new vma->is_gtt to simplify the check and get rid of the local variables. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Dave Gordon <david.s.gordon@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461240286-25968-1-git-send-email-tvrtko.ursulin@linux.intel.comReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Tvrtko Ursulin authored
Can use the new vma->is_ggtt to simplify the check and remove the local variables. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Dave Gordon <david.s.gordon@intel.com>
-
Tvrtko Ursulin authored
Can use vma->is_ggtt to simplify the check and also switch the BUG_ON to GEM_BUG_ON which is more appropriate for this. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Dave Gordon <david.s.gordon@intel.com>
-
Tvrtko Ursulin authored
Only caller is i915_gem_obj_ggtt_size which only cares about GGTT so simplify it and implement under that name. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Dave Gordon authored
Because having both i915_gem_object_alloc() and i915_gem_alloc_object() (with different return conventions) is just too confusing! (i915_gem_object_alloc() is the low-level memory allocator, and remains unchanged, whereas i915_gem_alloc_object() is a constructor that ALSO initialises the newly-allocated object.) Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461348872-4702-1-git-send-email-david.s.gordon@intel.com
-
Joonas Lahtinen authored
Move graphics stolen memory related early quirk into a function to allow easy adding of other graphics quirks to fix memory maps on machines running old BIOS versions. While at it; - _funcs -> _ops to follow de facto naming - make the iteration code tad more readable - remove unused variables Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Acked-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Joonas Lahtinen authored
Move the better constructs/comments from i915_gem_stolen.c to early-quirks.c and increase readability in preparation of only having one set of functions. - intel_stolen_base -> gen3_stolen_base - use phys_addr_t instead of u32 for address for future proofing v2: - Print the invalid register values (Chris) (Omitting the register prefix as it's visible from backtrace.) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Acked-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Tim Gore authored
This patch applies a performance enhancement workaround based on analysis of DX and OCL S-Curve workloads. We increase the General Priority Credits for L3SQ from the hardware default of 56 to the max value 62, and decrease the High Priority credits from 8 to 2. v2: Only apply to B0 onwards v3: Move w/a to per engine init, ie bxt_init_workarounds Signed-off-by:
Tim Gore <tim.gore@intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461314761-36854-1-git-send-email-tim.gore@intel.comReviewed-by:
Michel Thierry <michel.thierry@intel.com>
-
Daniel Vetter authored
Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 24 Apr, 2016 3 commits
-
-
Akash Goel authored
As a part of WaGsvDisableTurbo, Driver makes an early exit from the Gen9 Turbo enabling function, so doesn't program the Turbo Control register. But BIOS could leave the Hw Turbo as enabled, so need to explicitly clear out the Control register just to avoid inconsitency with debugfs interface, which will show Turbo as enabled only and that is not expected after adding the WaGsvDisableTurbo. Apart from this there is no problem even if the Turbo is left enabled in the Control register, as the Up/Down interrupts would remain masked. v2: Add explicit clearing of Turbo Control register to *_disable_rps() also for the similar consistency (Chris) Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Akash Goel <akash.goel@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1461350146-23454-2-git-send-email-akash.goel@intel.comSigned-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Akash Goel authored
There are certain registers, which captures the time elapsed in the in current Up/Down EI, for how long GT has been Idle/Busy/Avg in the current Up/Down EI and also in the previous Up/Down EI. These register values are reported by the i915_frequency_info debugfs interface. The Driver prints the 'us' suffix after the values, albeit they are actually in raw form & not in microsecond units. This patch removes the 'us' suffix so that its clear to User that values are indeed in raw form. v2: Present the values in microseconds unit also, after platform specific conversion (Chris) v3: Add a space between raw & microsecond value (Chris) Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Akash Goel <akash.goel@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1461350146-23454-3-git-send-email-akash.goel@intel.comSigned-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Akash Goel authored
Added a new GT_PM_INTERVAL_TO_US macro to perform the platform specific conversion of PM time interval values to microseconds unit. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Akash Goel <akash.goel@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1461350146-23454-1-git-send-email-akash.goel@intel.comSigned-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
- 22 Apr, 2016 10 commits
-
-
Ville Syrjälä authored
Somehow my SNB GT1 (Dell XPS 8300) gets very unhappy around GPU hangs if the RPS EI/thresholds aren't suitably aligned. It seems like scheduling/timer interupts stop working somehow and things get stuck eg. in usleep_range(). I bisected the problem down to commit 8a586437 ("drm/i915/skl: Restructured the gen6_set_rps_thresholds function") I observed that before all the values were at least multiples of 25, but afterwards they are not. And rounding things up to the next multiple of 25 does seem to help, so lets' do that. I also tried roundup(..., 5) but that wasn't sufficient. Also I have no idea if we might need this sort of thing on gen9+ as well. These are the original EI/thresholds: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11800 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10250 GEN6_RP_UP_THRESHOLD 9225 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 8000 GEN6_RP_UP_THRESHOLD 6800 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 These are after 8a586437: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11875 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10156 GEN6_RP_UP_THRESHOLD 9140 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 7812 GEN6_RP_UP_THRESHOLD 6640 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 And these are what we have after this patch: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11875 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10175 GEN6_RP_UP_THRESHOLD 9150 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 7825 GEN6_RP_UP_THRESHOLD 6650 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 Cc: stable@vger.kernel.org Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Testcase: igt/kms_pipe_crc_basic/hang-read-crc-pipe-B Fixes: 8a586437 ("drm/i915/skl: Restructured the gen6_set_rps_thresholds function") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461159836-9108-1-git-send-email-ville.syrjala@linux.intel.comAcked-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
-
Shashank Sharma authored
This patch does the following: - Fakes live status of HDMI as connected (even if that's not). While testing certain (monitor + cable) combinations with various intel platforms, it seems that live status register doesn't work reliably on some older devices. So limit the live_status check for HDMI detection, only for platforms from gen7 onwards. V2: restrict faking live_status to certain platforms V3: (Ville) - keep the debug message for !live_status case - fix indentation of comment - remove "warning" from the debug message (Jani) - Change format of fix details in the commit message Fixes: 237ed86c ("drm/i915: Check live status before reading edid") Cc: stable@vger.kernel.org # v4.4 Suggested-by:
Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461237606-16491-1-git-send-email-shashank.sharma@intel.comSigned-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Imre Deak authored
It's possible that BIOS enables PHY0, but it programmes only the first channel on it. Since we program the PHYs only during driver loading this is an incorrect configuration from the driver's point of view, since we may use both channels eventually. Detect this scenario and force reprogramming the PHY in this case. The actual scenario for me was that the lane optimization for the second channel in PHY0 was not setup by BIOS and so a state verification warning was triggered. Everything else was setup properly. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461174366-16758-4-git-send-email-imre.deak@intel.com
-
Imre Deak authored
If we skipped PHY0 initialization because it was already enabled by BIOS, we still have to wait for the PHY1 GRC calibration as that is done as part of the PHY0 init. v2: - Use the actual PHY index in the debug message in broxton_phy_wait_grc_done() (Ville) CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461255561-1644-1-git-send-email-imre.deak@intel.com
-
Imre Deak authored
It's possible that BIOS enables PHY1 only to read out the GRC value from it to be used in PHY0 and then disables PHY1. In this case we can't use the PHY1 GRC value for state verification, so use instead the one in PHY0 always. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461174366-16758-2-git-send-email-imre.deak@intel.com
-
Matthew Auld authored
Remove dev local and use to_i915() in gen8_ppgtt_notify_vgt. v2: use dev_priv directly for QUESTION_MACROS (Joonas Lahtinen) Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461323365-21256-1-git-send-email-matthew.auld@intel.com
-
Imre Deak authored
Right after runtime resume we know that we can re-enable DC5, since we just disabled DC9 and power well 2 is disabled. So enable DC5 explicitly instead of delaying this until the next time we disable power well 2. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461173277-16090-5-git-send-email-imre.deak@intel.com
-
Imre Deak authored
After suspend-to-ram or -disk we don't know what power state the display HW will be, DC0 or DC9 are both possible states, so reset the software DC state tracking in these cases. This gets rid of 'DC state mismatch' error messages during resuming from ram or disk where we expected to be in DC9 (as set by the suspend handler) but we are in DC0. v2: - Remove extra WS in gen9_sanitize_dc_state() (Bob) Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461173277-16090-4-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Atm, we run the BSpec display core uninit/init sequences twice during system suspend/resume. While this shouldn't cause any problem, it's redundant, so get rid of the duplicate call. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461173277-16090-3-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Initially we thought that the platform specific suspend/resume sequences can be shared between the runtime and system suspend/resume handlers. This turned out to be not true, we have quite a few differences on most of the platforms. This was realized already earlier by Paulo who inlined the platform specific resume_prepare handlers. We have the same problem with the corresponding suspend_complete handlers, there are platform differences that make it unfeasible to share the code between the runtime and system suspend paths. Also now we call functions that need to be paired like hsw_enable_pc8()/hsw_disable_pc8() from different levels of the call stack, which is confusing. Fix this by inlining the suspend_complete handlers too. This is also needed by the next patch that removes a redundant uninit/init call during system suspend/resume on BXT. No functional change. CC: Paulo Zanoni <przanoni@gmail.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> [s/uninline/inline in the commit message] Link: http://patchwork.freedesktop.org/patch/msgid/1461173277-16090-2-git-send-email-imre.deak@intel.com
-
- 21 Apr, 2016 1 commit
-
-
Imre Deak authored
In commit 5f304c87 ("drm/i915/kbl: Reset secondary power well requests left on by DMC/KVMR") I forgot about the fact that SKL==KBL most of the time and that a secondary MISC IO power well request left on by the DMC is "expected". Tune down the corresponding WARN to be a debug message. This was caught by CI suspend tests. CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461060036-19043-1-git-send-email-imre.deak@intel.com
-
- 20 Apr, 2016 2 commits
-
-
Mika Kahola authored
It was noticed on bug #94087 that module parameter i915.edp_vswing=2 that should override the VBT setting to use default voltage swing (400 mV) was not applied for Broadwell. This patch provides a fix for this by checking if default i.e. higher voltage swing is requested to be used and applies the DDI translations table for DP instead of eDP (low vswing) table. v2: Combine two if statements into one (Jani) v3: Change dev_priv->edp_low_vswing to use dev_priv->vbt.edp.low_vswing Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94087Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461155942-7749-1-git-send-email-mika.kahola@intel.com Cc: stable@vger.kernel.org Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Dave Gordon authored
The newly-introduced function i915_gem_object_pin_map() returns an ERR_PTR (not NULL) if the pin-and-map opertaion fails, so that's what we must check for. And it's nicer not to assign such a pointer-or-error to a structure being filled in until after it's been validated, so we should keep it local and avoid exporting a bogus pointer. Also, for clarity and symmetry, we should clear 'virtual_start' along with 'vma' when unmapping a ringbuffer. Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-