- 27 Jul, 2015 29 commits
-
-
Nicolas Dichtel authored
We need to copy this field (ip6_rt_cache_alloc() and ip6_rt_pcpu_alloc() use ip6_rt_copy_init() to build a dst). CC: Thomas Graf <tgraf@suug.ch> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 19e42e45 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
This function make sense only when LWTUNNEL_STATE_OUTPUT_REDIRECT is set. The check is already done in IPv4. CC: Thomas Graf <tgraf@suug.ch> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 74a0f2fe ("ipv6: rt6_info output redirect to tunnel output") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wu Fengguang authored
drivers/net/phy/dp83867.c:126:1-4: WARNING: end returns can be simpified drivers/net/phy/dp83867.c:74:5-8: WARNING: end returns can be simpified if tested value is negative or 0 Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci CC: Dan Murphy <dmurphy@ti.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
subashab@codeaurora.org authored
Fix the following typo - unchainged -> unchanged Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Gartrell authored
mov %rsp, %r1 ; r1 = rsp add $-8, %r1 ; r1 = rsp - 8 store_q $123, -8(%rsp) ; *(u64*)r1 = 123 <- valid store_q $123, (%r1) ; *(u64*)r1 = 123 <- previously invalid mov $0, %r0 exit ; Always need to exit And we'd get the following error: 0: (bf) r1 = r10 1: (07) r1 += -8 2: (7a) *(u64 *)(r10 -8) = 999 3: (7a) *(u64 *)(r1 +0) = 999 R1 invalid mem access 'fp' Unable to load program We already know that a register is a stack address and the appropriate offset, so we should be able to validate those references as well. Signed-off-by:
Alex Gartrell <agartrell@fb.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Amir Vadai says: ==================== ConnectX-4 driver update 2015-07-23 This patchset introduce some performance enhancements to the ConnectX-4 driver. 1. Improving RSS distribution, and make RSS function controlable using ethtool. 2. Make memory that is written by NIC and read by host CPU allocate in the local NUMA to the processing CPU 3. Support tx copybreak 4. Using hardware feature called blueflame to save DMA reads when possible Another patch by Achiad fix some cosmetic issues in the driver. Patchset was applied and tested on top of commit 045a0fa0 ("ip_tunnel: Call ip_tunnel_core_init() from inet_init()") ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
In addition to the source/destination IP which are already hashed. Only for unicast traffic for now. Signed-off-by:
Achiad Shochat <achiad@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
No logical change in this commit. Signed-off-by:
Achiad Shochat <achiad@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
A regular TX WQE execution involves two or more DMA reads - one to fetch the WQE, and another one per WQE gather entry. These DMA reads obviously increase the TX latency. There are two mlx5 mechanisms to bypass these DMA reads: 1) Inline WQE 2) Blue Flame (BF) An inline WQE contains a whole packet, thus saves the DMA read/s of the regular WQE gather entry/s. Inline WQE support was already added in the previous commit. A BF WQE is written directly to the device I/O mapped memory, thus enables saving the DMA read that fetches the WQE. The BF WQE I/O write must be in cache line granularity, thus uses the CPU write combining mechanism. A BF WQE I/O write acts also as a TX doorbell for notifying the device of new TX WQEs. A BF WQE is written to the same I/O mapped address as the regular TX doorbell, thus this address is being mapped twice - once by ioremap() and once by io_mapping_map_wc(). While both mechanisms reduce the TX latency, they both consume more CPU cycles than a regular WQE: - A BF WQE must still be written to host memory, in addition to being written directly to the device I/O mapped memory. - An inline WQE involves copying the SKB data into it. To handle this tradeoff, we introduce here a heuristic algorithm that strives to avoid using these two mechanisms in case the TX queue is being back-pressured by the device, and limit their usage rate otherwise. An inline WQE will always be "Blue Flamed" (written directly to the device I/O mapped memory) while a BF WQE may not be inlined (may contain gather entries). Preliminary testing using netperf UDP_RR shows that the latency goes down from 17.5us to 16.9us, while the message rate (tested with pktgen) stays the same. Signed-off-by:
Achiad Shochat <achiad@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
AKA inline WQE. A TX latency optimization to save data gather DMA reads. Controlled by ETHTOOL_TX_COPYBREAK. Signed-off-by:
Achiad Shochat <achiad@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
By affinity hints and XPS, each mlx5e channel is assigned a CPU core. Channel DMA coherent memory that is written by the NIC and read by SW (e.g CQ buffer) is allocated on the NUMA node of the CPU core assigned for the channel. Channel DMA coherent memory that is written by SW and read by the NIC (e.g SQ/RQ buffer) is allocated on the NUMA node of the NIC. Doorbell record (written by SW and read by the NIC) is an exception since it is accessed by SW more frequently. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
The ConnectX-4 HW implements inverted XOR8. To make it act as XOR we re-order the HW RSS indirection table. Set XOR to be the default RSS hash function and add ethtool API to control it. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
WingMan Kwok says: ==================== net: netcp: Bug fixes of CPSW statistics collection This patch set contains bug fixes and enhencements of hw ethernet statistics processing on TI's Keystone2 CPSW ethernet switches. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WingMan Kwok authored
This patch adds the missing statistics for the host and slave ports of the CPSW on K2L and K2E platforms. Signed-off-by:
WingMan Kwok <w-kwok2@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WingMan Kwok authored
In certain applications it's beneficial to allow the CPSW h/w stats counters to continue to increment even while the kernel polls them. This patch implements this behavior for both 1G and 10G ethernet subsystem modules. Signed-off-by:
WingMan Kwok <w-kwok2@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WingMan Kwok authored
Different Keystone2 platforms have different number and layouts of hw statistics modules. This patch consolidates the statistics processing of different Keystone2 platforms for easy maintenance. Signed-off-by:
WingMan Kwok <w-kwok2@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WingMan Kwok authored
The CPSW driver keeps internally some, but not all, of the statistics available in the hw statistics modules. Furthermore, some of the locations in the hw statistics modules are reserved and contain no useful information. Prior to this patch, the driver allocates memory of the size of the the whole hw statistics modules, instead of the size of statistics-entries-interested-in (i.e. et_stats), for internal storage. This patch fixes that. Signed-off-by:
WingMan Kwok <w-kwok2@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WingMan Kwok authored
This patch fixes error in the setting of the hw statistics module base for K2HK platform. In K2HK although there are 4 hw statistics modules, but only 2 are visible at a time. Thus when setting up the pointers to the base of the corresponding hw statistics modules, modules 0 and 2 should point to one base, while modules 1 and 3 should point to the other. Signed-off-by:
WingMan Kwok <w-kwok2@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WingMan Kwok authored
This patch fixes a bug in which the timer routine synchronized against the ethtool-triggered statistics updates with spin_lock_bh(). A timer function is itself a bottom-half, so this should be spin_lock(). Signed-off-by:
WingMan Kwok <w-kwok2@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
VF driver was reading incorrect freelist congestion notification threshold for FLM queues when packing is enabled for T5 and T6 adapter. Fixing it now. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
Note also that include/linux/lwtunnel.h is not needed. CC: Thomas Graf <tgraf@suug.ch> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 499a2425 ("lwtunnel: infrastructure for handling light weight tunnels like mpls") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Satish Ashok authored
Send notifications on router port add and del/expire, re-use the already existing MDBA_ROUTER and send NEWMDB/DELMDB netlink notifications respectively. Signed-off-by:
Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Retrieve the tunnel metadata for packets received by a net_device and provide it to ovs_vport_receive() for flow key extraction. [This hunk was in the GRE patch in the initial series and missed the cut for the initial submission for merging.] Fixes: 614732ea ("openvswitch: Use regular VXLAN net_device device") Signed-off-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Harini Katakam authored
JUMBO and NO_GIGABIT_HALF have the same capability masks. Change one of them. Signed-off-by:
Harini Katakam <harinik@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
With CONFIG_VXLAN=m and CONFIG_OPENVSWITCH=y, there was the following compilation error: LD init/built-in.o net/built-in.o: In function `vxlan_tnl_create': .../net/openvswitch/vport-netdev.c:322: undefined reference to `vxlan_dev_create' make: *** [vmlinux] Error 1 CC: Thomas Graf <tgraf@suug.ch> Fixes: 614732ea ("openvswitch: Use regular VXLAN net_device device") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Currently, we do not notice if new alternative gateways are added. We can do it by checking for present neigh entry. Also, gateways that are currently probed (NUD_INCOMPLETE) can be skipped from round-robin probing. Suggested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei-Chun Chao authored
Similar check was added in ip_rcv but not in ipv6_rcv. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81734e0a>] ipv6_rcv+0xfa/0x500 Call Trace: [<ffffffff816c9786>] ? ip_rcv+0x296/0x400 [<ffffffff817732d2>] ? packet_rcv+0x52/0x410 [<ffffffff8168e99f>] __netif_receive_skb_core+0x63f/0x9a0 [<ffffffffc02b34a0>] ? br_handle_frame_finish+0x580/0x580 [bridge] [<ffffffff8109912c>] ? update_rq_clock.part.81+0x1c/0x40 [<ffffffff8168ed18>] __netif_receive_skb+0x18/0x60 [<ffffffff8168fa1f>] process_backlog+0x9f/0x150 Fixes: ee122c79 (vxlan: Flow based tunneling) Signed-off-by:
Wei-Chun Chao <weichunc@plumgrid.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Commit 8d88c6eb ("net: bcmgenet: enable MoCA link state change detection") added a fixed PHY link_update callback for MoCA PHYs when registered using platform_data exclusively, this change is also applicable to systems using Device Tree as their primary configuration interface. In order for this to work, move the link_update assignment into bcmgenet_moca_phy_setup() where we know for sure that we are running on a MoCA GENET instance, and do not override phydev->link since this is: - properly taken care of by the PHY library by getting the link UP/DOWN interrupts - this now runs everytime we call bcmgenet_open(), so we need to preserve whatever we detected before we went administratively DOWN and then UP - we need to make sure that MoCA PHYs start with a link DOWN during probe in order to force a link transition to occur To avoid a forward declaration, move bcmgenet_fixed_phy_link_update() above its caller. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Instead of multiplying the number of checks for IS_ERR(priv->clk), simply NULLify the 'struct clk' pointer which is something the Linux common clock framework perfectly deals with and does early return for each and every single clk_* API functions. Having every single function check for !IS_ERR(priv->clk) is both redundant and error prone, as it turns out, we were doing it for the main GENET clock: priv->clk, but not for the Wake-on-LAN or EEE clock, so let's just be consistent here. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Petri Gynther <pgynther@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 26 Jul, 2015 7 commits
-
-
KY Srinivasan authored
The current code returns from probe without waiting for the proper handling of subchannels that may be requested. If the netvsc driver were to be rapidly loaded/unloaded, we can trigger a panic as the unload will be tearing down state that may not have been fully setup yet. We fix this issue by making sure that we return from the probe call only after ensuring that the sub-channel offers in flight are properly handled. Reviewed-and-tested-by: Haiyang Zhang <haiyangz@microsoft.com Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Adapter can go for a toss, if cxgb4 is loaded as slave and we try to upgrade the firmware. So add a check for the same before flashing firmware using ethtool. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Silences the following sparse warnings: drivers/net/vxlan.c:1818:21: warning: incorrect type in assignment (different base types) drivers/net/vxlan.c:1818:21: expected restricted __be32 [usertype] vx_vni drivers/net/vxlan.c:1818:21: got unsigned int [unsigned] [usertype] vni drivers/net/vxlan.c:2014:58: warning: incorrect type in argument 11 (different base types) drivers/net/vxlan.c:2014:58: expected unsigned int [unsigned] [usertype] vni drivers/net/vxlan.c:2014:58: got restricted __be32 [usertype] <noident> Fixes: 614732ea ("openvswitch: Use regular VXLAN net_device device") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jon Maloy says: ==================== tipc: clean up socket message reception Despite recent improvements the message reception code in socket.c is perceived as obscure and hard to follow, especially regarding the logics for message rejection. With the commits in this series we try to remedy this situation. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
When a message is received in a socket, one of the call chains tipc_sk_rcv()->tipc_sk_enqueue()->filter_rcv()(->tipc_sk_proto_rcv()) or tipc_sk_backlog_rcv()->filter_rcv()(->tipc_sk_proto_rcv()) are followed. At each of these levels we may encounter situations where the message may need to be rejected, or a new message produced for transfer back to the sender. Despite recent improvements, the current code for doing this is perceived as awkward and hard to follow. Leveraging the two previous commits in this series, we now introduce a more uniform handling of such situations. We let each of the functions in the chain itself produce/reverse the message to be returned to the sender, but also perform the actual forwarding. This simplifies the necessary logics within each function. Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
Currently, we use the code sequence if (msg_reverse()) tipc_link_xmit_skb() at numerous locations in socket.c. The preparation of arguments for these calls, as well as the sequence itself, makes the code unecessarily complex. In this commit, we introduce a new function, tipc_sk_respond(), that performs this call combination. We also replace some, but not yet all, of these explicit call sequences with calls to the new function. Notably, we let the function tipc_sk_proto_rcv() use the new function to directly send out PROBE_REPLY messages, instead of deferring this to the calling tipc_sk_rcv() function, as we do now. Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
The shortest TIPC message header, for cluster local CONNECTED messages, is 24 bytes long. With this format, the fields "dest_node" and "orig_node" are optimized away, since they in reality are redundant in this particular case. However, the absence of these fields leads to code inconsistencies that are difficult to handle in some cases, especially when we need to reverse or reject messages at the socket layer. In this commit, we concentrate the handling of the absent fields to one place, by letting the function tipc_msg_reverse() reallocate the buffer and expand the header to 32 bytes when necessary. This means that the socket code now can assume that the two previously absent fields are present in the header when a message needs to be rejected. This opens up for some further simplifications of the socket code. Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 25 Jul, 2015 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-07-23 This series contains updates to e1000e, igb, ixgbevf, i40e and i40evf. Emil extends the reporting of the RSS key and hash table by adding support for x550 VFs. Jia-Ju Bai fixes a QoS issue in e1000e where the error handling lacked a call to pm_qos_remove_request() to cleanup the QoS request made in e1000_open(). Todd updates igb to report unsupported for ethtool coalesce settings that are not supported. Also updated the driver to use the ARRAY_SIZE() macro. Carolyn fixes and refactors the dynamic ITR code for i40e and i40evf which would never change dynamically. So update the switch() statement to have a default case and switch on "new_latency_range" versus the current ITR setting. Shannon cleans up i40e code, where there were un-needed goto's. Also clean up error status messages that were causing some confusion in PHY and FCoE setup error reports. Mitch updates the virtual channel interface to prepare for the x722 device and other future devices, so that the VF driver can report what its capable of supporting to the PF driver. Updates the i40evf driver to handle resets like Core or EMP resets, where the device is reinitialized and the VF will not get the same VSI. Jesse updates the i40e and i40evf driver to use the kernel BIT() and BIT_ULL() macros. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rosen, Rami authored
This patch fixes setting of vinfo.flags in the br_fill_ifvlaninfo_range() method. The assignment of vinfo.flags &= ~BRIDGE_VLAN_INFO_RANGE_BEGIN has no effect and is unneeded, as vinfo.flags value is overriden by the immediately following vinfo.flags = flags | BRIDGE_VLAN_INFO_RANGE_END assignement. Signed-off-by:
Rami Rosen <rami.rosen@intel.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sriharsha Basavapatna authored
Add be_get_phys_port_id() function to report physical port id. The port id should be unique across different be2net devices in the system. We use the chip serial number along with the physical port number for this. Signed-off-by:
Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 23 Jul, 2015 1 commit
-
-
Jesse Brandeburg authored
Use macros for abstracting (1 << foo) to BIT(foo) and (1ULL << foo64) to BIT_ULL(foo64) in order to match better with kernel requirements. NOTE: the adminq_cmd.h file was not modified on purpose because of the dependency upon firmware for that file. Change-ID: I73ee2e48c880d671948aad19bd53ca6b2ac558fc Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Jim Young <james.m.young@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-