This uses anyOf which is wrong. Use oneOf and move the items under the
description. Also drop allOf for $ref.
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/CAE-0n50KE9bkqZvCOLtCGiq3g1jYhK7zpVcVFBzinaguNhNaPw@mail.gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If the device is a detachable (and therefore lacks full keyboard), we may
still want to load this driver because the device might have some other
buttons or switches (e.g. volume and power buttons or a tablet mode
switch). In such case we do not want to register the "main" keyboard device
to allow userspace detect when the detachable keyboard is disconnected and
adjust the system behavior for the tablet mode.

Originally it was suggested to simply skip keyboard registration if row and
columns properties didn't exist, but that approach did not convey the
intent strongly enough and also had a slight problem for migrating existing
DTBs without updating the kernel first, so it was decided to introduce new
google,cros-ec-keyb-switches to explicitly mark devices that only have
axillary buttons and switches.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220516183452.942008-3-swboyd@chromium.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If the ChromeOS board is a detachable, this cros-ec-keyb device won't
have a matrix keyboard but it may have some button switches, e.g. volume
buttons and power buttons. The driver still registers a keyboard though
and that leads to userspace confusion around where the keyboard is.

We tried to work around this by only registering the keyboard device when
rows/columns properties were specified for the device, but that led to
another problem where removing the rows/columns properties breaks the
existing binding. Technically before that commit the rows/columns
properties were required, otherwise the driver would fail to probe.
Removing the properties from devicetrees makes the driver fail to probe
unless the corresponding driver patch is present. Furthermore, this makes
requiring matrix keyboard properties for devices that really have a
keyboard impossible because the compatible drives the schema and now the
properties are optional.

Add a more specific compatible for this type of device that indicates to
the OS that there are only switches and no matrix keyboard present.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220516183452.942008-2-swboyd@chromium.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm fix from Paolo Bonzini:
 "Fix for the SLS mitigation, which makes a 'SETcc/RET' pair grow
  to 'SETcc/RET/INT3'.

  This doesn't fit in 4 bytes any more, so the alignment has to
  change to 8 for this case"

* tag 'for-linus-5.17' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm/emulate: Fix SETcc emulation function offsets with SLS

Pull input fixes from Dmitry Torokhov:
 "Two driver fixes:

   - a fix for zinitix touchscreen to properly report contacts

   - a fix for aiptek tablet driver to be more resilient to devices with
     incorrect descriptors"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: aiptek - properly check endpoint type
  Input: zinitix - do not report shadow fingers

The commit in Fixes started adding INT3 after RETs as a mitigation
against straight-line speculation.

The fastop SETcc implementation in kvm's insn emulator uses macro magic
to generate all possible SETcc functions and to jump to them when
emulating the respective instruction.

However, it hardcodes the size and alignment of those functions to 4: a
three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an
INT3 that gets slapped after the RET, which brings the whole scheme out
of alignment:

  15:   0f 90 c0                seto   %al
  18:   c3                      ret
  19:   cc                      int3
  1a:   0f 1f 00                nopl   (%rax)
  1d:   0f 91 c0                setno  %al
  20:   c3                      ret
  21:   cc                      int3
  22:   0f 1f 00                nopl   (%rax)
  25:   0f 92 c0                setb   %al
  28:   c3                      ret
  29:   cc                      int3

and this explodes like this:

  int3: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 2435 Comm: qemu-system-x86 Not tainted 5.17.0-rc8-sls #1
  Hardware name: Dell Inc. Precision WorkStation T3400  /0TP412, BIOS A14 04/30/2012
  RIP: 0010:setc+0x5/0x8 [kvm]
  Code: 00 00 0f 1f 00 0f b6 05 43 24 06 00 c3 cc 0f 1f 80 00 00 00 00 0f 90 c0 c3 cc 0f \
	  1f 00 0f 91 c0 c3 cc 0f 1f 00 0f 92 c0 c3 cc <0f> 1f 00 0f 93 c0 c3 cc 0f 1f 00 \
	  0f 94 c0 c3 cc 0f 1f 00 0f 95 c0
  Call Trace:
   <TASK>
   ? x86_emulate_insn [kvm]
   ? x86_emulate_instruction [kvm]
   ? vmx_handle_exit [kvm_intel]
   ? kvm_arch_vcpu_ioctl_run [kvm]
   ? kvm_vcpu_ioctl [kvm]
   ? __x64_sys_ioctl
   ? do_syscall_64
   ? entry_SYSCALL_64_after_hwframe
   </TASK>

Raise the alignment value when SLS is enabled and use a macro for that
instead of hard-coding naked numbers.

Fixes: e463a09a ("x86: Add straight-line-speculation mitigation")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net
[Add a comment and a bit of safety checking, since this is going to be changed
 again for IBT support. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull ARM SoC fix from Arnd Bergmann:
 "Here is one last regression fix for 5.17, reverting a patch that went
  into 5.16 as a cleanup that ended up breaking external interrupts on
  Layerscape chips.

  The revert makes it work again, but also reintroduces a build time
  warning about the nonstandard DT binding that will have to be dealt
  with in the future"

* tag 'soc-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  Revert "arm64: dts: freescale: Fix 'interrupt-map' parent address cells"

Pull SCSI fixes from James Bottomley:
 "Two small(ish) fixes, both in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fnic: Finish scsi_cmnd before dropping the spinlock
  scsi: mpt3sas: Page fault in reply q processing

Merge tag 'perf-tools-fixes-for-v5.17-2022-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Avoid iterating empty evlist, fixing a segfault with 'perf stat --null'

 - Ignore case in topdown.slots check, fixing issue with Intel Icelake
   JSON metrics.

 - Fix symbol size calculation condition for fixing up corner case
   symbol end address obtained from Kallsyms.

* tag 'perf-tools-fixes-for-v5.17-2022-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf parse-events: Ignore case in topdown.slots check
  perf evlist: Avoid iteration for empty evlist.
  perf symbols: Fix symbol size calculation condition

Pull char/misc driver fix from Greg KH:
 "Here is a single driver fix for 5.17-final that has been submitted
  many times but I somehow missed it in my patch queue:

   - fix for counter sysfs code for reported problem

  This has been in linux-next all week with no reported issues"

* tag 'char-misc-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  counter: Stop using dev_get_drvdata() to get the counter device

Pull USB fixes from Greg KH:
 "Here are some small remaining USB fixes for 5.17-final.

  They include:

   - two USB gadget driver fixes for reported problems

   - usbtmc driver fix for syzbot found issues

   - musb patch partial revert to resolve a reported regression.

  All of these have been in linux-next this week with no reported
  problems"

* tag 'usb-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: Fix use-after-free bug by not setting udc->dev.driver
  usb: usbtmc: Fix bug in pipe direction for control transfers
  partially Revert "usb: musb: Set the DT node on the child device"
  usb: gadget: rndis: prevent integer overflow in rndis_set_response()

An issue with icelakex metrics:

  https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json?h=perf/core&id=65eab2bc7dab326ee892ec5a4c749470b368b51a#n48

That causes the slots not to be first.

Fixes: 94dbfd67 ("perf parse-events: Architecture specific leader override")
Reported-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220317224309.543736-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As seen with 'perf stat --null ..' and reported in:
https://lore.kernel.org/lkml/YjCLcpcX2peeQVCH@kernel.org/

v2. Avoids setting evsel in the empty list case as suggested by Jiri Olsa.

    Committer testing:

Before:

  $  perf stat --null sleep 1
  Segmentation fault (core dumped)
  $

After:

  $  perf stat --null sleep 1

   Performance counter stats for 'sleep 1':

         1.010340646 seconds time elapsed

         0.001420000 seconds user
         0.000000000 seconds sys
  $

Fixes: 472832d2 ("perf evlist: Refactor evlist__for_each_cpu()")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220317231643.550902-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Before this patch, the symbol end address fixup to be called, needed two
conditions being met:

  if (prev->end == prev->start && prev->end != curr->start)

Where
  "prev->end == prev->start" means that prev is zero-long
                             (and thus needs a fixup)
and
  "prev->end != curr->start" means that fixup hasn't been applied yet

However, this logic is incorrect in the following situation:

*curr  = {rb_node = {__rb_parent_color = 278218928,
  rb_right = 0x0, rb_left = 0x0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 40, type = 2 '\002',
  binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}

*prev = {rb_node = {__rb_parent_color = 278219041,
  rb_right = 0x109548b0, rb_left = 0x109547c0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 12, type = 2 '\002',
  binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1095486e "optinsn_slot"}

In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.

After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.

Fixes: 3b01a413 ("perf symbols: Improve kallsyms symbol end addr calculation")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull arm64 fixes from Catalin Marinas:
 "Fix two compiler warnings introduced by recent commits: pointer
  arithmetic and double initialisation of struct field"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: errata: avoid duplicate field initializer
  arm64: fix clang warning about TRAMP_VALIAS

Pull cifs fix from Steve French:
 "Small fix for regression in multiuser mounts.

  The additional improvements suggested by Ronnie to make the server and
  session status handling code easier to read can wait for the 5.18
  merge window."

* tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix incorrect session setup check for multiuser mounts

Pull block fixes from Jens Axboe:

 - Revert of a nvme target feature (Hannes)

 - Fix a memory leak with rq-qos (Ming)

* tag 'block-5.17-2022-03-18' of git://git.kernel.dk/linux-block:
  nvmet: revert "nvmet: make discovery NQN configurable"
  block: release rq qos structures for queue without disk

Pull drm fixes from Dave Airlie:
 "A few minor changes to finish things off, one mgag200 regression, imx
  fix and couple of panel changes.

  imx:
   - Don't test bus flags in atomic check

  mgag200:
   - Fix PLL setup on some models

  panel:
   - Fix bpp settings on Innolux G070Y2-L01
   - Fix DRM_PANEL_EDP Kconfig dependencies"

* tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm:
  drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
  drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings
  drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
  drm/mgag200: Fix PLL setup for g200wb and g200ew

The '.type' field is initialized both in place and in the macro
as reported by this W=1 warning:

arch/arm64/include/asm/cpufeature.h:281:9: error: initialized field overwritten [-Werror=override-init]
  281 |         (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
      |         ^
arch/arm64/kernel/cpu_errata.c:136:17: note: in expansion of macro 'ARM64_CPUCAP_LOCAL_CPU_ERRATUM'
  136 |         .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,                         \
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:145:9: note: in expansion of macro 'ERRATA_MIDR_RANGE'
  145 |         ERRATA_MIDR_RANGE(m, var, r_min, var, r_max)
      |         ^~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:613:17: note: in expansion of macro 'ERRATA_MIDR_REV_RANGE'
  613 |                 ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
      |                 ^~~~~~~~~~~~~~~~~~~~~
arch/arm64/include/asm/cpufeature.h:281:9: note: (near initialization for 'arm64_errata[18].type')
  281 |         (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
      |         ^

Remove the extranous initializer.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1dd498e5 ("KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata")
Link: https://lore.kernel.org/r/20220316183800.1546731-1-arnd@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:

arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
                return (char *)TRAMP_VALIAS + SZ_2K * slot;

Change the addition to something clang does not complain about.

Fixes: bd09128d ("arm64: Add percpu vectors for EL1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

 * drm/imx: Don't test bus flags in atomic check
 * drm/mgag200: Fix PLL setup on some models
 * drm/panel: Fix bpp settings on Innolux G070Y2-L01; Fix DRM_PANEL_EDP
   Kconfig dependencies
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YjMNcqOuDFDoe+EN@linux-uq9g

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, ipsec, and wireless.

  A few last minute revert / disable and fix patches came down from our
  sub-trees. We're not waiting for any fixes at this point.

  Current release - regressions:

   - Revert "netfilter: nat: force port remap to prevent shadowing
     well-known ports", restore working conntrack on asymmetric paths

   - Revert "ath10k: drop beacon and probe response which leak from
     other channel", restore working AP and mesh mode on QCA9984

   - eth: intel: fix hang during reboot/shutdown

  Current release - new code bugs:

   - netfilter: nf_tables: disable register tracking, it needs more work
     to cover all corner cases

  Previous releases - regressions:

   - ipv6: fix skb_over_panic in __ip6_append_data when (admin-only)
     extension headers get specified

   - esp6: fix ESP over TCP/UDP, interpret ipv6_skip_exthdr's return
     value more selectively

   - bnx2x: fix driver load failure when FW not present in initrd

  Previous releases - always broken:

   - vsock: stop destroying unrelated sockets in nested virtualization

   - packet: fix slab-out-of-bounds access in packet_recvmsg()

  Misc:

   - add Paolo Abeni to networking maintainers!"

* tag 'net-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (26 commits)
  iavf: Fix hang during reboot/shutdown
  net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
  net: bcmgenet: skip invalid partial checksums
  bnx2x: fix built-in kernel driver load failure
  net: phy: mscc: Add MODULE_FIRMWARE macros
  net: dsa: Add missing of_node_put() in dsa_port_parse_of
  net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()
  Revert "ath10k: drop beacon and probe response which leak from other channel"
  hv_netvsc: Add check for kvmalloc_array
  iavf: Fix double free in iavf_reset_task
  ice: destroy flow director filter mutex after releasing VSIs
  ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats()
  Add Paolo Abeni to networking maintainers
  atm: eni: Add check for dma_map_single
  net/packet: fix slab-out-of-bounds access in packet_recvmsg()
  net: mdio: mscc-miim: fix duplicate debugfs entry
  net: phy: marvell: Fix invalid comparison in the resume and suspend functions
  esp6: fix check on ipv6_skip_exthdr's return value
  net: dsa: microchip: add spi_device_id tables
  netfilter: nf_tables: disable register tracking
  ...

Pull ACPI fix from Rafael Wysocki:
 "Revert recent commit that caused multiple systems to misbehave due to
  firmware issues"

* tag 'acpi-5.17-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI: scan: Do not add device IDs from _CID if _HID is not valid"

Merge misc fixes from Andrew Morton:
 "Four patches.

  Subsystems affected by this patch series: mm/swap, kconfig, ocfs2, and
  selftests"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  selftests: vm: fix clang build error multiple output files
  ocfs2: fix crash when initialize filecheck kobj fails
  configs/debug: restore DEBUG_INFO=y for overriding
  mm: swap: get rid of livelock in swapin readahead

When building the vm selftests using clang, some errors are seen due to
having headers in the compilation command:

  clang -Wall -I ../../../../usr/include  -no-pie    gup_test.c ../../../../mm/gup_test.h -lrt -lpthread -o .../tools/testing/selftests/vm/gup_test
  clang: error: cannot specify -o when generating multiple output files
  make[1]: *** [../lib.mk:146: .../tools/testing/selftests/vm/gup_test] Error 1

Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.

Link: https://lkml.kernel.org/r/20220304000645.1888133-1-yosryahmed@google.comSigned-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Once s_root is set, genric_shutdown_super() will be called if
fill_super() fails.  That means, we will call ocfs2_dismount_volume()
twice in such case, which can lead to kernel crash.

Fix this issue by initializing filecheck kobj before setting s_root.

Link: https://lkml.kernel.org/r/20220310081930.86305-1-joseph.qi@linux.alibaba.com
Fixes: 5f483c4a ("ocfs2: add kobject for online file check")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Previously, I failed to realize that Kees' patch [1] has not been merged
into the mainline yet, and dropped DEBUG_INFO=y too eagerly from the
mainline.  As the results, "make debug.config" won't be able to flip
DEBUG_INFO=n from the existing .config.  This should close the gaps of a
few weeks before Kees' patch is there, and work regardless of their
merging status anyway.

Link: https://lore.kernel.org/all/20220125075126.891825-1-keescook@chromium.org/ [1]
Link: https://lkml.kernel.org/r/20220308153524.8618-1-quic_qiancai@quicinc.comSigned-off-by: Qian Cai <quic_qiancai@quicinc.com>
Reported-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In our testing, a livelock task was found.  Through sysrq printing, same
stack was found every time, as follows:

  __swap_duplicate+0x58/0x1a0
  swapcache_prepare+0x24/0x30
  __read_swap_cache_async+0xac/0x220
  read_swap_cache_async+0x58/0xa0
  swapin_readahead+0x24c/0x628
  do_swap_page+0x374/0x8a0
  __handle_mm_fault+0x598/0xd60
  handle_mm_fault+0x114/0x200
  do_page_fault+0x148/0x4d0
  do_translation_fault+0xb0/0xd4
  do_mem_abort+0x50/0xb0

The reason for the livelock is that swapcache_prepare() always returns
EEXIST, indicating that SWAP_HAS_CACHE has not been cleared, so that it
cannot jump out of the loop.  We suspect that the task that clears the
SWAP_HAS_CACHE flag never gets a chance to run.  We try to lower the
priority of the task stuck in a livelock so that the task that clears
the SWAP_HAS_CACHE flag will run.  The results show that the system
returns to normal after the priority is lowered.

In our testing, multiple real-time tasks are bound to the same core, and
the task in the livelock is the highest priority task of the core, so
the livelocked task cannot be preempted.

Although cond_resched() is used by __read_swap_cache_async, it is an
empty function in the preemptive system and cannot achieve the purpose
of releasing the CPU.  A high-priority task cannot release the CPU
unless preempted by a higher-priority task.  But when this task is
already the highest priority task on this core, other tasks will not be
able to be scheduled.  So we think we should replace cond_resched() with
schedule_timeout_uninterruptible(1), schedule_timeout_interruptible will
call set_current_state first to set the task state, so the task will be
removed from the running queue, so as to achieve the purpose of giving
up the CPU and prevent it from running in kernel mode for too long.

(akpm: ugly hack becomes uglier.  But it fixes the issue in a
backportable-to-stable fashion while we hopefully work on something
better)

Link: https://lkml.kernel.org/r/20220221111749.1928222-1-cgel.zte@gmail.comSigned-off-by: Guo Ziliang <guo.ziliang@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Ziliang Guo <guo.ziliang@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Recent commit 97457801 ("iavf: Add waiting so the port is
initialized in remove") adds a wait-loop at the beginning of
iavf_remove() to ensure that port initialization is finished
prior unregistering net device. This causes a regression
in reboot/shutdown scenario because in this case callback
iavf_shutdown() is called and this callback detaches the device,
makes it down if it is running and sets its state to __IAVF_REMOVE.
Later shutdown callback of associated PF driver (e.g. ice_shutdown)
is called. That callback calls among other things sriov_disable()
that calls indirectly iavf_remove() (see stack trace below).
As the adapter state is already __IAVF_REMOVE then the mentioned
loop is end-less and shutdown process hangs.

The patch fixes this by checking adapter's state at the beginning
of iavf_remove() and skips the rest of the function if the adapter
is already in remove state (shutdown is in progress).

Reproducer:
1. Create VF on PF driven by ice or i40e driver
2. Ensure that the VF is bound to iavf driver
3. Reboot

[52625.981294] sysrq: SysRq : Show Blocked State
[52625.988377] task:reboot          state:D stack:    0 pid:17359 ppid:     1 f2
[52625.996732] Call Trace:
[52625.999187]  __schedule+0x2d1/0x830
[52626.007400]  schedule+0x35/0xa0
[52626.010545]  schedule_hrtimeout_range_clock+0x83/0x100
[52626.020046]  usleep_range+0x5b/0x80
[52626.023540]  iavf_remove+0x63/0x5b0 [iavf]
[52626.027645]  pci_device_remove+0x3b/0xc0
[52626.031572]  device_release_driver_internal+0x103/0x1f0
[52626.036805]  pci_stop_bus_device+0x72/0xa0
[52626.040904]  pci_stop_and_remove_bus_device+0xe/0x20
[52626.045870]  pci_iov_remove_virtfn+0xba/0x120
[52626.050232]  sriov_disable+0x2f/0xe0
[52626.053813]  ice_free_vfs+0x7c/0x340 [ice]
[52626.057946]  ice_remove+0x220/0x240 [ice]
[52626.061967]  ice_shutdown+0x16/0x50 [ice]
[52626.065987]  pci_device_shutdown+0x34/0x60
[52626.070086]  device_shutdown+0x165/0x1c5
[52626.074011]  kernel_restart+0xe/0x30
[52626.077593]  __do_sys_reboot+0x1d2/0x210
[52626.093815]  do_syscall_64+0x5b/0x1a0
[52626.097483]  entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 97457801 ("iavf: Add waiting so the port is initialized in remove")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://lore.kernel.org/r/20220317104524.2802848-1-ivecera@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ACL rules can be offloaded to VCAP IS2 either through chain 0, or, since
the blamed commit, through a chain index whose number encodes a specific
PAG (Policy Action Group) and lookup number.

The chain number is translated through ocelot_chain_to_pag() into a PAG,
and through ocelot_chain_to_lookup() into a lookup number.

The problem with the blamed commit is that the above 2 functions don't
have special treatment for chain 0. So ocelot_chain_to_pag(0) returns
filter->pag = 224, which is in fact -32, but the "pag" field is an u8.

So we end up programming the hardware with VCAP IS2 entries having a PAG
of 224. But the way in which the PAG works is that it defines a subset
of VCAP IS2 filters which should match on a packet. The default PAG is
0, and previous VCAP IS1 rules (which we offload using 'goto') can
modify it. So basically, we are installing filters with a PAG on which
no packet will ever match. This is the hardware equivalent of adding
filters to a chain which has no 'goto' to it.

Restore the previous functionality by making ACL filters offloaded to
chain 0 go to PAG 0 and lookup number 0. The choice of PAG is clearly
correct, but the choice of lookup number isn't "as before" (which was to
leave the lookup a "don't care"). However, lookup 0 should be fine,
since even though there are ACL actions (policers) which have a
requirement to be used in a specific lookup, that lookup is 0.

Fixes: 226e9cd8 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220316192117.2568261-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The RXCHK block will return a partial checksum of 0 if it encounters
a problem while receiving a packet. Since a 1's complement sum can
only produce this result if no bits are set in the received data
stream it is fair to treat it as an invalid partial checksum and
not pass it up the stack.

Fixes: 81015539 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220317012812.1313196-1-opendmb@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit b7a49f73 ("bnx2x: Utilize firmware 7.13.21.0")
added request_firmware() logic in probe() which caused
load failure when firmware file is not present in initrd (below),
as access to firmware file is not feasible during probe.

  Direct firmware load for bnx2x/bnx2x-e2-7.13.15.0.fw failed with error -2
  Direct firmware load for bnx2x/bnx2x-e2-7.13.21.0.fw failed with error -2

This patch fixes this issue by -

1. Removing request_firmware() logic from the probe()
   such that .ndo_open() handle it as it used to handle
   it earlier

2. Given request_firmware() is removed from probe(), so
   driver has to relax FW version comparisons a bit against
   the already loaded FW version (by some other PFs of same
   adapter) to allow different compatible/close enough FWs with which
   multiple PFs may run with (in different environments), as the
   given PF who is in probe flow has no idea now with which firmware
   file version it is going to initialize the device in ndo_open()

Link: https://lore.kernel.org/all/46f2d9d9-ae7f-b332-ddeb-b59802be2bab@molgen.mpg.de/Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: b7a49f73 ("bnx2x: Utilize firmware 7.13.21.0")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220316214613.6884-1-manishc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver requires firmware so define MODULE_FIRMWARE so that modinfo
provides the details.

Fixes: fa164e40 ("net: phy: mscc: split the driver into separate files")
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: 6d4e5c57 ("net: dsa: get port type at parse time")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316082602.10785-1-linmq006@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Fix a number of undefined references to drm_kms_helper.ko in
drm_dp_helper.ko:

  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state':
  drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work':
  drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work':
  drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work':
  drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event'

This happens if panel-edp.ko has been configured with

  DRM_PANEL_EDP=y
  DRM_DP_HELPER=y
  DRM_KMS_HELPER=m

which builds DP helpers into the kernel and KMS helpers sa a module.
Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem.

To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't
make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge
drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers
cannot be selected directly by the user, config symbols should avoid
depending on it anyway.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 3755d35e ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Brian Masney <bmasney@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/478296/

Backmerging drm/drm-fixes for commit 3755d35e ("drm/panel: Select
DRM_DP_HELPER for DRM_PANEL_EDP").
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

A recent change to how the SMB3 server (socket) and session status
is managed regressed multiuser mounts by changing the check
for whether session setup is needed to the socket (TCP_Server_info)
structure instead of the session struct (cifs_ses). Add additional
check in cifs_setup_sesion to fix this.

Fixes: 73f9bfbe ("cifs: maintain a state machine for tcp/smb/tcon sessions")
Reported-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

This kind of interface doesn't have a mac header. This patch fixes
bpf_redirect() to a PIM interface.

Fixes: 27b29f63 ("bpf: add bpf_redirect() helper")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull EFI fix from Ard Biesheuvel:
 "Avoid spurious warnings about unknown boot parameters"

* tag 'efi-urgent-for-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: fix return value of __setup handlers