This patch adds __uninit as a kfunc annotation.

This will be useful for scenarios such as for example in dynptrs,
indicating whether the dynptr should be checked by the verifier as an
initialized or an uninitialized dynptr.

Without this annotation, the alternative would be needing to hard-code
in the verifier the specific kfunc to indicate that arg should be
treated as an uninitialized arg.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-7-joannelkoong@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This commit refactors the logic for determining which register in a
function is the dynptr into "get_dynptr_arg_reg". This will be used
in the future when the dynptr reg for BPF_FUNC_dynptr_write will need
to be obtained in order to support writes for skb dynptrs.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-6-joannelkoong@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Some bpf dynptr functions will be called from places where
if CONFIG_BPF_SYSCALL is not set, then the dynptr function is
undefined. For example, when skb type dynptrs are added in the
next commit, dynptr functions are called from net/core/filter.c

This patch defines no-op implementations of these dynptr functions
so that they do not break compilation by being an undefined reference.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-5-joannelkoong@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This change allows kfuncs to take in an uninitialized dynptr as a
parameter. Before this change, only helper functions could successfully
use uninitialized dynptrs. This change moves the memory access check
(including stack state growing and slot marking) into
process_dynptr_func(), which both helpers and kfuncs call into.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-4-joannelkoong@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This change cleans up process_dynptr_func's flow to be more intuitive
and updates some comments with more context.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-3-joannelkoong@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The bpf mirror of the in-kernel sk_buff and xdp_buff data structures are
__sk_buff and xdp_md. Currently, when we pass in the program ctx to a
kfunc where the program ctx is a skb or xdp buffer, we reject the
program if the in-kernel definition is sk_buff/xdp_buff instead of
__sk_buff/xdp_md.

This change allows "sk_buff <--> __sk_buff" and "xdp_buff <--> xdp_md"
to be recognized as valid matches. The user program may pass in their
program ctx as a __sk_buff or xdp_md, and the in-kernel definition
of the kfunc may define this arg as a sk_buff or xdp_buff.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-2-joannelkoong@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

[Changes from V4:
- s/regs:16/regs:8 in figure.]

[Changes from V3:
- Back to src_reg and dst_reg, since they denote register numbers
  as opposed to the values stored in these registers.]

[Changes from V2:
- Use src and dst consistently in the document.
- Use a more graphical depiction of the 128-bit instruction.
- Remove `Where:' fragment.
- Clarify that unused bits are reserved and shall be zeroed.]

[Changes from V1:
- Use rst literal blocks for figures.
- Avoid using | in the basic instruction/pseudo instruction figure.
- Rebased to today's bpf-next master branch.]

This patch modifies instruction-set.rst so it documents the encoding
of BPF instructions in terms of how the bytes are stored (be it in an
ELF file or as bytes in a memory buffer to be loaded into the kernel
or some other BPF consumer) as opposed to how the instruction looks
like once loaded.

This is hopefully easier to understand by implementors looking to
generate and/or consume bytes conforming BPF instructions.

The patch also clarifies that the unused bytes in a pseudo-instruction
shall be cleared with zeros.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/87h6v6i0da.fsf_-_@oracle.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

In commit 332ea1f6 ("bpf: Add bpf_cgroup_from_id() kfunc"), a new
bpf_cgroup_from_id() kfunc was added which allows a BPF program to
lookup and acquire a reference to a cgroup from a cgroup id. The
commit's doxygen comment seems to have copy-pasted fields, which causes
BPF kfunc helper documentation to fail to render:

<snip>/helpers.c:2114: warning: Excess function parameter 'cgrp'...
<snip>/helpers.c:2114: warning: Excess function parameter 'level'...

<snip>

<snip>/helpers.c:2114: warning: Excess function parameter 'level'...

This patch fixes the doxygen header.

Fixes: 332ea1f6 ("bpf: Add bpf_cgroup_from_id() kfunc")
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230228152845.294695-1-void@manifault.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

For R4000 erratas around multiplication and division instructions,
as our use of those instructions are always followed by mflo/mfhi
instructions, the only issue we need care is

"MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0" Errata 28:
"A double-word or a variable shift may give an incorrect result if
executed while an integer multiplication is in progress."

We just emit a mfhi $0 to ensure the operation is completed after
every multiplication instruction according to workaround suggestion
in the document.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/20230228113305.83751-3-jiaxun.yang@flygoat.com

For DADDI errata we just workaround by disable immediate operation
for BPF_ADD / BPF_SUB to avoid generation of DADDIU.

All other use cases in JIT won't cause overflow thus they are all safe.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/20230228113305.83751-2-jiaxun.yang@flygoat.com

Commit 04d58f1b("libbpf: add API to get XDP/XSK supported features")
added feature_flags to struct bpf_xdp_query_opts. If a user uses
bpf_xdp_query_opts with feature_flags member, the bpf_xdp_query()
will check whether 'netdev' family exists or not in the kernel.
If it does not exist, the bpf_xdp_query() will return -ENOENT.

But 'netdev' family does not exist in old kernels as it is
introduced in the same patch set as Commit 04d58f1b.
So old kernel with newer libbpf won't work properly with
bpf_xdp_query() api call.

To fix this issue, if the return value of
libbpf_netlink_resolve_genl_family_id() is -ENOENT, bpf_xdp_query()
will just return 0, skipping the rest of xdp feature query.
This preserves backward compatibility.

Fixes: 04d58f1b ("libbpf: add API to get XDP/XSK supported features")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230227224943.1153459-1-yhs@fb.com

Replace the short informal description with the proper doc comments.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230220234958.764997-1-iii@linux.ibm.com

The syscall register definitions for ARM in bpf_tracing.h doesn't define
the fifth parameter for the syscalls. Because of this some KPROBES based
selftests fail to compile for ARM architecture.

Define the fifth parameter that is passed in the R5 register (uregs[4]).

Fixes: 3a95c42d ("libbpf: Define arm syscall regs spec in bpf_tracing.h")
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230223095346.10129-1-puranjay12@gmail.com

Commit bc292ab0("mm: introduce vma->vm_flags wrapper functions")
turns the vm_flags into a const variable.

Added bpf_find_vma test in commit f108662b("selftests/bpf: Add tests
for bpf_find_vma") to assign values to variables that declare const in
find_vma_fail1.c programs, which is an error to the compiler and does not
test BPF verifiers. It is better to replace 'const vm_flags_t vm_flags'
with 'unsigned long vm_start' for testing.

    $ make -C tools/testing/selftests/bpf/ -j8
    ...
    progs/find_vma_fail1.c:16:16: error: cannot assign to non-static data
    member 'vm_flags' with const-qualified type 'const vm_flags_t' (aka
    'const unsigned long')
            vma->vm_flags |= 0x55;
            ~~~~~~~~~~~~~ ^
    ../tools/testing/selftests/bpf/tools/include/vmlinux.h:1898:20:
    note: non-static data member 'vm_flags' declared const here
                    const vm_flags_t vm_flags;
                    ~~~~~~~~~~~`~~~~~~^~~~~~~~
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_CB281722B3C1BD504C16CDE586CACC2BE706@qq.com

RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange
Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid
two-character escape sequences. This does not include \', which is not
required in JSON because it exclusively uses double quotes as string
separators.

Solidus (/) may be escaped, but does not have to. Only reverse
solidus (\), double quotes ("), and the control characters have to be
escaped. Therefore, with this fix, bpftool correctly supports all valid
two-character escape sequences (but still does not support characters
that require multi-character escape sequences).

Witout this fix, attempting to load a JSON file generated by bpftool
using Python 3.10.6's default json.load() may fail with the error
"Invalid \escape" if the file contains the invalid escaped single
quote (\').

Fixes: b66e907c ("tools: bpftool: copy JSON writer from iproute2 repository")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230227150853.16863-1-gerhorst@cs.fau.de

After commit 80d7da1c ("asm-generic: Drop getrlimit and setrlimit
syscalls from default list"), new architectures won't need to include
getrlimit and setrlimit, they are superseded with prlimit64.

In order to maintain compatibility for the new architectures, such as
LoongArch which does not define __NR_getrlimit, it is better to use
__NR_prlimit64 instead of __NR_getrlimit in user_ringbuf test to fix
the following build error:

    TEST-OBJ [test_progs] user_ringbuf.test.o
  tools/testing/selftests/bpf/prog_tests/user_ringbuf.c: In function 'kick_kernel_cb':
  tools/testing/selftests/bpf/prog_tests/user_ringbuf.c:593:17: error: '__NR_getrlimit' undeclared (first use in this function)
    593 |         syscall(__NR_getrlimit);
        |                 ^~~~~~~~~~~~~~
  tools/testing/selftests/bpf/prog_tests/user_ringbuf.c:593:17: note: each undeclared identifier is reported only once for each function it appears in
  make: *** [Makefile:573: tools/testing/selftests/bpf/user_ringbuf.test.o] Error 1
  make: Leaving directory 'tools/testing/selftests/bpf'
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1677235015-21717-4-git-send-email-yangtiezhu@loongson.cn

LoongArch provides struct user_pt_regs instead of struct pt_regs
to userspace, use struct user_pt_regs to define __PT_REGS_CAST()
to fix the following build error:

     CLNG-BPF [test_maps] loop1.bpf.o
  progs/loop1.c:22:9: error: incomplete definition of type 'struct pt_regs'
                                  m = PT_REGS_RC(ctx);
                                      ^~~~~~~~~~~~~~~
  tools/testing/selftests/bpf/tools/include/bpf/bpf_tracing.h:493:41: note: expanded from macro 'PT_REGS_RC'
  #define PT_REGS_RC(x) (__PT_REGS_CAST(x)->__PT_RC_REG)
                         ~~~~~~~~~~~~~~~~~^
  tools/testing/selftests/bpf/tools/include/bpf/bpf_helper_defs.h:20:8: note: forward declaration of 'struct pt_regs'
  struct pt_regs;
         ^
  1 error generated.
  make: *** [Makefile:572: tools/testing/selftests/bpf/loop1.bpf.o] Error 1
  make: Leaving directory 'tools/testing/selftests/bpf'
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1677235015-21717-2-git-send-email-yangtiezhu@loongson.cn

Hangbin Liu says:

====================

As Martin suggested, let's move the SYS() macro to test_progs.h since
a lot of programs are using it. After that, let's run mptcp in a dedicated
netns to avoid user config influence.

v3: fix fd redirect typo. Move SYS() macro into the test_progs.h
v2: remove unneed close_cgroup_fd goto label.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

The current mptcp test is run in init netns. If the user or default
system config disabled mptcp, the test will fail. Let's run the mptcp
test in a dedicated netns to avoid none kernel default mptcp setting.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230224061343.506571-3-liuhangbin@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

A lot of tests defined SYS() macro to run system calls with goto label.
Let's move this macro to test_progs.h and add configurable
"goto_label" as the first arg.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230224061343.506571-2-liuhangbin@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Add a test case for bpf_cgroup_from_id.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/Y/bBlt+tPozcQgws@slm.duckdns.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

cgroup ID is an userspace-visible 64bit value uniquely identifying a given
cgroup. As the IDs are used widely, it's useful to be able to look up the
matching cgroups. Add bpf_cgroup_from_id().

v2: Separate out selftest into its own patch as suggested by Alexei.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/Y/bBaG96t0/gQl9/@slm.duckdns.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Document the discussion from the email thread on the IETF bpf list,
where it was explained that the raw format varies by endianness
of the processor.
Signed-off-by: Dave Thaler <dthaler@microsoft.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230220223742.1347-1-dthaler1968@googlemail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Kernel's flow dissector continues to parse the packet when
the (optional) IPv6 flow label is empty even when instructed
to stop (via BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL). Do
the same in our reference BPF reimplementation.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230221180518.2139026-1-sdf@google.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds kernel function call support for RV64. Since the offset
from RV64 kernel and module functions to bpf programs is almost within
the range of s32, the current infrastructure of RV64 is already
sufficient for kfunc, so let's turn it on.
Suggested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230221140656.3480496-1-pulehui@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The condition src_reg != BPF_PSEUDO_CALL && imm == BPF_FUNC_tail_call
may be satisfied by a kfunc call. This would lead to unnecessarily
setting has_tail_call. Use src_reg == 0 instead.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230220163756.753713-1-iii@linux.ibm.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The current implementation already allow such mixing.
Let's enable it in JIT.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/r/20230218105317.4139666-1-hengqi.chen@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

I cross-compile my BPF selftests with the following command:

CLANG_CROSS_FLAGS="--target=aarch64-linux-gnu --sysroot=/sysroot/" \
  make LLVM=1 CC=clang CROSS_COMPILE=aarch64-linux-gnu- SRCARCH=arm64

(Note the use of CLANG_CROSS_FLAGS to specify a custom sysroot instead
of letting clang use gcc's default sysroot)

However, CLANG_CROSS_FLAGS gets propagated to host tools builds (libbpf
and bpftool) and because they reference it directly in their Makefiles,
they end up cross-compiling host objects which results in linking
errors.

This patch ensures that CLANG_CROSS_FLAGS is reset if CROSS_COMPILE
isn't set (for example when reaching a BPF host tool build).
Signed-off-by: Florent Revest <revest@chromium.org>
Link: https://lore.kernel.org/r/20230217151832.27784-1-revest@chromium.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The following three uapi headers:

    tools/arch/arm64/include/uapi/asm/bpf_perf_event.h
    tools/arch/s390/include/uapi/asm/bpf_perf_event.h
    tools/arch/s390/include/uapi/asm/ptrace.h

were introduced in commit 618e165b ("selftests/bpf: sync kernel headers
and introduce arch support in Makefile"), they are not used any more after
commit 720f228e ("bpf: fix broken BPF selftest build"), so remove them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1676533861-27508-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The size of bpf_cpumask is fixed, so there is no need to allocate many
bpf_mem_caches for bpf_cpumask_ma, just one bpf_mem_cache is enough.
Also add comments for bpf_mem_alloc_init() in bpf_mem_alloc.h to prevent
future miuse.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230216024821.2202916-1-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Typically, verifier should use env->allow_ptr_leaks when invaliding
registers for users that don't have CAP_PERFMON or CAP_SYS_ADMIN to
avoid leaking the pointer value. This is similar in spirit to
c67cae55 ("bpf: Tighten ptr_to_btf_id checks."). In a lot of the
existing checks, we know the capabilities are present, hence we don't do
the check.

Instead of being inconsistent in the application of the check, wrap the
action of invalidating a register into a helper named 'mark_invalid_reg'
and use it in a uniform fashion to replace open coded invalidation
operations, so that the check is always made regardless of the call site
and we don't have to remember whether it needs to be done or not for
each case.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230221200646.2500777-7-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The current code does type matching for the case where reg->type is
PTR_TO_BTF_ID or has the PTR_TRUSTED flag. However, this only needs to
occur for non-MEM_ALLOC and non-MEM_PERCPU cases, but will include both
as per the current code.

The MEM_ALLOC case with or without PTR_TRUSTED needs to be handled
specially by the code for type_is_alloc case, while MEM_PERCPU case must
be ignored. Hence, to restore correct behavior and for clarity,
explicitly list out the handled PTR_TO_BTF_ID types which should be
handled for each case using a switch statement.

Helpers currently only take:
	PTR_TO_BTF_ID
	PTR_TO_BTF_ID | PTR_TRUSTED
	PTR_TO_BTF_ID | MEM_RCU
	PTR_TO_BTF_ID | MEM_ALLOC
	PTR_TO_BTF_ID | MEM_PERCPU
	PTR_TO_BTF_ID | MEM_PERCPU | PTR_TRUSTED

This fix was also described (for the MEM_ALLOC case) in [0].

  [0]: https://lore.kernel.org/bpf/20221121160657.h6z7xuvedybp5y7s@apolloSigned-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230221200646.2500777-6-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The plan is to supposedly tag everything with PTR_TRUSTED eventually,
however those changes should bring in their respective code, instead
of leaving it around right now. It is arguable whether PTR_TRUSTED is
required for all types, when it's only use case is making PTR_TO_BTF_ID
a bit stronger, while all other types are trusted by default.

Hence, just drop the two instances which do not occur in the verifier
for now to avoid reader confusion.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230221200646.2500777-5-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

There are a few cases where hlist_node is checked to be unhashed without
holding the lock protecting its modification. In this case, one must use
hlist_unhashed_lockless to avoid load tearing and KCSAN reports. Fix
this by using lockless variant in places not protected by the lock.

Since this is not prompted by any actual KCSAN reports but only from
code review, I have not included a fixes tag.

Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230221200646.2500777-4-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Eduard Zingerman says:

====================

This patch-set modifies BPF verifier to accept programs that read from
uninitialized stack locations, but only if executed in privileged mode.
This provides significant verification performance gains: 30% to 70% less
processed states for big number of test programs.

The reason for performance gains comes from treating STACK_MISC and
STACK_INVALID as compatible, when cached state is compared to current state
in verifier.c:stacksafe().

The change should not affect safety, because any value read from STACK_MISC
location has full binary range (e.g. 0x00-0xff for byte-sized reads).

Details and measurements are provided in the description for the patch #1.

The change was suggested by Andrii Nakryiko, the initial patch was created
by Alexei Starovoitov. The discussion could be found at [1].

Changes v1 -> v2 (v1 available at [2]):
- Calls to helper functions now convert STACK_INVALID to STACK_MISC
  (suggested by Andrii);
- The test case progs/test_global_func10.c is updated to expect new
  error message. Before recent commit [3] exact content of error
  messages was not verified for this test.
- Replaced incorrect '//'-style comments in test case asm blocks by
  '/*...*/'-style comments in order to fix compilation issues;
- Changed the tag from "Suggested-By" to "Co-developed-by" for Alexei
  on patch #1, please let me know if this is appropriate use of the tag.

[1] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/20230216183606.2483834-1-eddyz87@gmail.com/
[3] 95ebb376 ("selftests/bpf: Convert test_global_funcs test to test_loader framework")
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Three testcases to make sure that stack reads from uninitialized
locations are accepted by verifier when executed in privileged mode:
- read from a fixed offset;
- read from a variable offset;
- passing a pointer to stack to a helper converts
  STACK_INVALID to STACK_MISC.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230219200427.606541-3-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This commits updates the following functions to allow reads from
uninitialized stack locations when env->allow_uninit_stack option is
enabled:
- check_stack_read_fixed_off()
- check_stack_range_initialized(), called from:
  - check_stack_read_var_off()
  - check_helper_mem_access()

Such change allows to relax logic in stacksafe() to treat STACK_MISC
and STACK_INVALID in a same way and make the following stack slot
configurations equivalent:

  |  Cached state    |  Current state   |
  |   stack slot     |   stack slot     |
  |------------------+------------------|
  | STACK_INVALID or | STACK_INVALID or |
  | STACK_MISC       | STACK_SPILL   or |
  |                  | STACK_MISC    or |
  |                  | STACK_ZERO    or |
  |                  | STACK_DYNPTR     |

This leads to significant verification speed gains (see below).

The idea was suggested by Andrii Nakryiko [1] and initial patch was
created by Alexei Starovoitov [2].

Currently the env->allow_uninit_stack is allowed for programs loaded
by users with CAP_PERFMON or CAP_SYS_ADMIN capabilities.

A number of test cases from verifier/*.c were expecting uninitialized
stack access to be an error. These test cases were updated to execute
in unprivileged mode (thus preserving the tests).

The test progs/test_global_func10.c expected "invalid indirect read
from stack" error message because of the access to uninitialized
memory region. This error is no longer possible in privileged mode.
The test is updated to provoke an error "invalid indirect access to
stack" because of access to invalid stack address (such error is not
verified by progs/test_global_func*.c series of tests).

The following tests had to be removed because these can't be made
unprivileged:
- verifier/sock.c:
  - "sk_storage_get(map, skb->sk, &stack_value, 1): partially init
  stack_value"
  BPF_PROG_TYPE_SCHED_CLS programs are not executed in unprivileged mode.
- verifier/var_off.c:
  - "indirect variable-offset stack access, max_off+size > max_initialized"
  - "indirect variable-offset stack access, uninitialized"
  These tests verify that access to uninitialized stack values is
  detected when stack offset is not a constant. However, variable
  stack access is prohibited in unprivileged mode, thus these tests
  are no longer valid.

 * * *

Here is veristat log comparing this patch with current master on a
set of selftest binaries listed in tools/testing/selftests/bpf/veristat.cfg
and cilium BPF binaries (see [3]):

$ ./veristat -e file,prog,states -C -f 'states_pct<-30' master.log current.log
File                        Program                     States (A)  States (B)  States    (DIFF)
--------------------------  --------------------------  ----------  ----------  ----------------
bpf_host.o                  tail_handle_ipv6_from_host         349         244    -105 (-30.09%)
bpf_host.o                  tail_handle_nat_fwd_ipv4          1320         895    -425 (-32.20%)
bpf_lxc.o                   tail_handle_nat_fwd_ipv4          1320         895    -425 (-32.20%)
bpf_sock.o                  cil_sock4_connect                   70          48     -22 (-31.43%)
bpf_sock.o                  cil_sock4_sendmsg                   68          46     -22 (-32.35%)
bpf_xdp.o                   tail_handle_nat_fwd_ipv4          1554         803    -751 (-48.33%)
bpf_xdp.o                   tail_lb_ipv4                      6457        2473   -3984 (-61.70%)
bpf_xdp.o                   tail_lb_ipv6                      7249        3908   -3341 (-46.09%)
pyperf600_bpf_loop.bpf.o    on_event                           287         145    -142 (-49.48%)
strobemeta.bpf.o            on_event                         15915        4772  -11143 (-70.02%)
strobemeta_nounroll2.bpf.o  on_event                         17087        3820  -13267 (-77.64%)
xdp_synproxy_kern.bpf.o     syncookie_tc                     21271        6635  -14636 (-68.81%)
xdp_synproxy_kern.bpf.o     syncookie_xdp                    23122        6024  -17098 (-73.95%)
--------------------------  --------------------------  ----------  ----------  ----------------

Note: I limited selection by states_pct<-30%.

Inspection of differences in pyperf600_bpf_loop behavior shows that
the following patch for the test removes almost all differences:

    - a/tools/testing/selftests/bpf/progs/pyperf.h
    + b/tools/testing/selftests/bpf/progs/pyperf.h
    @ -266,8 +266,8 @ int __on_event(struct bpf_raw_tracepoint_args *ctx)
            }

            if (event->pthread_match || !pidData->use_tls) {
    -               void* frame_ptr;
    -               FrameData frame;
    +               void* frame_ptr = 0;
    +               FrameData frame = {};
                    Symbol sym = {};
                    int cur_cpu = bpf_get_smp_processor_id();

W/o this patch the difference comes from the following pattern
(for different variables):

    static bool get_frame_data(... FrameData *frame ...)
    {
        ...
        bpf_probe_read_user(&frame->f_code, ...);
        if (!frame->f_code)
            return false;
        ...
        bpf_probe_read_user(&frame->co_name, ...);
        if (frame->co_name)
            ...;
    }

    int __on_event(struct bpf_raw_tracepoint_args *ctx)
    {
        FrameData frame;
        ...
        get_frame_data(... &frame ...) // indirectly via a bpf_loop & callback
        ...
    }

    SEC("raw_tracepoint/kfree_skb")
    int on_event(struct bpf_raw_tracepoint_args* ctx)
    {
        ...
        ret |= __on_event(ctx);
        ret |= __on_event(ctx);
        ...
    }

With regards to value `frame->co_name` the following is important:
- Because of the conditional `if (!frame->f_code)` each call to
  __on_event() produces two states, one with `frame->co_name` marked
  as STACK_MISC, another with it as is (and marked STACK_INVALID on a
  first call).
- The call to bpf_probe_read_user() does not mark stack slots
  corresponding to `&frame->co_name` as REG_LIVE_WRITTEN but it marks
  these slots as BPF_MISC, this happens because of the following loop
  in the check_helper_call():

	for (i = 0; i < meta.access_size; i++) {
		err = check_mem_access(env, insn_idx, meta.regno, i, BPF_B,
				       BPF_WRITE, -1, false);
		if (err)
			return err;
	}

  Note the size of the write, it is a one byte write for each byte
  touched by a helper. The BPF_B write does not lead to write marks
  for the target stack slot.
- Which means that w/o this patch when second __on_event() call is
  verified `if (frame->co_name)` will propagate read marks first to a
  stack slot with STACK_MISC marks and second to a stack slot with
  STACK_INVALID marks and these states would be considered different.

[1] https://lore.kernel.org/bpf/CAEf4BzY3e+ZuC6HUa8dCiUovQRg2SzEk7M-dSkqNZyn=xEmnPA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
[3] git@github.com:anakryiko/cilium.git
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Co-developed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230219200427.606541-2-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

Pull crypto update from Herbert Xu:
 "API:
   - Use kmap_local instead of kmap_atomic
   - Change request callback to take void pointer
   - Print FIPS status in /proc/crypto (when enabled)

  Algorithms:
   - Add rfc4106/gcm support on arm64
   - Add ARIA AVX2/512 support on x86

  Drivers:
   - Add TRNG driver for StarFive SoC
   - Delete ux500/hash driver (subsumed by stm32/hash)
   - Add zlib support in qat
   - Add RSA support in aspeed"

* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
  crypto: x86/aria-avx - Do not use avx2 instructions
  crypto: aspeed - Fix modular aspeed-acry
  crypto: hisilicon/qm - fix coding style issues
  crypto: hisilicon/qm - update comments to match function
  crypto: hisilicon/qm - change function names
  crypto: hisilicon/qm - use min() instead of min_t()
  crypto: hisilicon/qm - remove some unused defines
  crypto: proc - Print fips status
  crypto: crypto4xx - Call dma_unmap_page when done
  crypto: octeontx2 - Fix objects shared between several modules
  crypto: nx - Fix sparse warnings
  crypto: ecc - Silence sparse warning
  tls: Pass rec instead of aead_req into tls_encrypt_done
  crypto: api - Remove completion function scaffolding
  tls: Remove completion function scaffolding
  tipc: Remove completion function scaffolding
  net: ipv6: Remove completion function scaffolding
  net: ipv4: Remove completion function scaffolding
  net: macsec: Remove completion function scaffolding
  dm: Remove completion function scaffolding
  ...

Merge tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:

 - AMD PMC: Improvements to aid s2idle debugging

 - Dell WMI-DDV: hwmon support

 - INT3472 camera sensor power-management: Improve privacy LED support

 - Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule
   Interface) support

 - Mellanox: SN5600 and Nvidia L1 switch support

 - Microsoft Surface Support: Various cleanups + code improvements

 - tools/intel-speed-select: Various improvements

 - Miscellaneous other cleanups / fixes

* tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
  platform/x86: nvidia-wmi-ec-backlight: Add force module parameter
  platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY
  platform/x86: dell-ddv: Prefer asynchronous probing
  platform/x86: dell-ddv: Add hwmon support
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform: mellanox: mlx-platform: Move bus shift assignment out of the loop
  platform: mellanox: mlx-platform: Add mux selection register to regmap
  platform_data/mlxreg: Add field with mapped resource address
  platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration
  platform: mellanox: Extend all systems with I2C notification callback
  platform: mellanox: Split logic in init and exit flow
  platform: mellanox: Split initialization procedure
  platform: mellanox: Introduce support of new Nvidia L1 switch
  platform: mellanox: Introduce support for next-generation 800GB/s switch
  platform: mellanox: Cosmetic changes - rename to more common name
  platform: mellanox: Change "reset_pwr_converter_fail" attribute
  platform: mellanox: Introduce support for rack manager switch
  MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi
  x86/platform/uv: Make kobj_type structure constant
  platform/x86: think-lmi: Make kobj_type structure constant
  ...