- 02 Dec, 2021 1 commit
-
-
Kumar Kartikeya Dwivedi authored
Vinicius Costa Gomes reported [0] that build fails when CONFIG_DEBUG_INFO_BTF is enabled and CONFIG_BPF_SYSCALL is disabled. This leads to btf.c not being compiled, and then no symbol being present in vmlinux for the declarations in btf.h. Since BTF is not useful without enabling BPF subsystem, disallow this combination. However, theoretically disabling both now could still fail, as the symbol for kfunc_btf_id_list variables is not available. This isn't a problem as the compiler usually optimizes the whole register/unregister call, but at lower optimization levels it can fail the build in linking stage. Fix that by adding dummy variables so that modules taking address of them still work, but the whole thing is a noop. [0]: https://lore.kernel.org/bpf/20211110205418.332403-1-vinicius.gomes@intel.com Fixes: 14f267d9 ("bpf: btf: Introduce helpers for dynamic BTF set registration") Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211122144742.477787-2-memxor@gmail.com
-
- 30 Nov, 2021 3 commits
-
-
Johan Almbladh authored
The Kconfig symbol for R10000 ll/sc errata workaround in the MIPS JIT was misspelled, causing the workaround to not take effect when enabled. Fixes: 72570224 ("mips, bpf: Add JIT workarounds for CPU errata") Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211130160824.3781635-1-johan.almbladh@anyfinetworks.com
-
Sebastian Andrzej Siewior authored
The initial implementation of migrate_disable() for mainline was a wrapper around preempt_disable(). RT kernels substituted this with a real migrate disable implementation. Later on mainline gained true migrate disable support, but neither documentation nor affected code were updated. Remove stale comments claiming that migrate_disable() is PREEMPT_RT only. Don't use __this_cpu_inc() in the !PREEMPT_RT path because preemption is not disabled and the RMW operation can be preempted. Fixes: 74d862b6 ("sched: Make migrate_disable/enable() independent of RT") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211127163200.10466-3-bigeasy@linutronix.de
-
Sebastian Andrzej Siewior authored
The initial implementation of migrate_disable() for mainline was a wrapper around preempt_disable(). RT kernels substituted this with a real migrate disable implementation. Later on mainline gained true migrate disable support, but the documentation was not updated. Update the documentation, remove the claims about migrate_disable() mapping to preempt_disable() on non-PREEMPT_RT kernels. Fixes: 74d862b6 ("sched: Make migrate_disable/enable() independent of RT") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211127163200.10466-2-bigeasy@linutronix.de
-
- 19 Nov, 2021 2 commits
-
-
John Fastabend authored
When a sock is added to a sock map we evaluate what proto op hooks need to be used. However, when the program is removed from the sock map we have not been evaluating if that changes the required program layout. Before the patch listed in the 'fixes' tag this was not causing failures because the base program set handles all cases. Specifically, the case with a stream parser and the case with out a stream parser are both handled. With the fix below we identified a race when running with a proto op that attempts to read skbs off both the stream parser and the skb->receive_queue. Namely, that a race existed where when the stream parser is empty checking the skb->receive_queue from recvmsg at the precies moment when the parser is paused and the receive_queue is not empty could result in skipping the stream parser. This may break a RX policy depending on the parser to run. The fix tag then loads a specific proto ops that resolved this race. But, we missed removing that proto ops recv hook when the sock is removed from the sockmap. The result is the stream parser is stopped so no more skbs will be aggregated there, but the hook and BPF program continues to be attached on the psock. User space will then get an EBUSY when trying to read the socket because the recvmsg() handler is now waiting on a stopped stream parser. To fix we rerun the proto ops init() function which will look at the new set of progs attached to the psock and rest the proto ops hook to the correct handlers. And in the above case where we remove the sock from the sock map the RX prog will no longer be listed so the proto ops is removed. Fixes: c5d2177a ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211119181418.353932-3-john.fastabend@gmail.com
-
John Fastabend authored
When a TCP socket is added to a sock map we look at the programs attached to the map to determine what proto op hooks need to be changed. Before the patch in the 'fixes' tag there were only two categories -- the empty set of programs or a TX policy. In any case the base set handled the receive case. After the fix we have an optimized program for receive that closes a small, but possible, race on receive. This program is loaded only when the map the psock is being added to includes a RX policy. Otherwise, the race is not possible so we don't need to handle the race condition. In order for the call to sk_psock_init() to correctly evaluate the above conditions all progs need to be set in the psock before the call. However, in the current code this is not the case. We end up evaluating the requirements on the old prog state. If your psock is attached to multiple maps -- for example a tx map and rx map -- then the second update would pull in the correct maps. But, the other pattern with a single rx enabled map the correct receive hooks are not used. The result is the race fixed by the patch in the fixes tag below may still be seen in this case. To fix we simply set all psock->progs before doing the call into sock_map_init(). With this the init() call gets the full list of programs and chooses the correct proto ops on the first iteration instead of requiring the second update to pull them in. This fixes the race case when only a single map is used. Fixes: c5d2177a ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211119181418.353932-2-john.fastabend@gmail.com
-
- 17 Nov, 2021 11 commits
-
-
Björn Töpel authored
The arch_prepare_bpf_dispatcher function does not have a prototype, and yields the following warning when W=1 is enabled for the kernel build. >> arch/x86/net/bpf_jit_comp.c:2188:5: warning: no previous \ prototype for 'arch_prepare_bpf_dispatcher' [-Wmissing-prototypes] 2188 | int arch_prepare_bpf_dispatcher(void *image, s64 *funcs, \ int num_funcs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Remove the warning by adding a function declaration to include/linux/bpf.h. Fixes: 75ccbef6 ("bpf: Introduce BPF dispatcher") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Björn Töpel <bjorn@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211117125708.769168-1-bjorn@kernel.org
-
Thomas Gleixner authored
The recent addition of timestamp correction to compensate the CDC error introduced a subtle signed/unsigned bug in stmmac_get_tx_hwtstamp() while it managed for some obscure reason to avoid that in stmmac_get_rx_hwtstamp(). The issue is: s64 adjust = 0; u64 ns; adjust += -(2 * (NSEC_PER_SEC / priv->plat->clk_ptp_rate)); ns += adjust; works by chance on 64bit, but falls apart on 32bit because the compiler knows that adjust fits into 32bit and then treats the addition as a u64 + u32 resulting in an off by ~2 seconds failure. The RX variant uses an u64 for adjust and does the adjustment via ns -= adjust; because consistency is obviously overrated. Get rid of the pointless zero initialized adjust variable and do: ns -= (2 * NSEC_PER_SEC) / priv->plat->clk_ptp_rate; which is obviously correct and spares the adjust obfuscation. Aside of that it yields a more accurate result because the multiplication takes place before the integer divide truncation and not afterwards. Stick the calculation into an inline so it can't be accidentally disimproved. Return an u32 from that inline as the result is guaranteed to fit which lets the compiler optimize the substraction. Cc: stable@vger.kernel.org Fixes: 3600be5f ("net: stmmac: add timestamp correction to rid CDC sync error") Reported-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Benedikt Spranger <b.spranger@linutronix.de> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel EHL Link: https://lore.kernel.org/r/87mtm578cs.ffs@tglxSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Xin Long says: ==================== net: fix the mirred packet drop due to the incorrect dst This issue was found when using OVS HWOL on OVN-k8s. These packets dropped on rx path were seen with output dst, which should've been dropped from the skbs when redirecting them. The 1st patch is to the fix and the 2nd is a selftest to reproduce and verify it. ==================== Link: https://lore.kernel.org/r/cover.1636734751.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Davide Caratti authored
add a selftest that verifies the correct behavior of TC act_mirred egress to ingress: in particular, it checks if the dst_entry is removed from skb before redirect egress -> ingress. The correct behavior is: an ICMP 'echo request' generated by ping will be received and generate a reply the same way as the one generated by mausezahn. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
Without dropping dst, the packets sent from local mirred/redirected to ingress will may still use the old dst. ip_rcv() will drop it as the old dst is for output and its .input is dst_discard. This patch is to fix by also dropping dst for those packets that are mirred or redirected from egress to ingress in act_mirred. Note that we don't drop it for the direction change from ingress to egress, as on which there might be a user case attaching a metadata dst by act_tunnel_key that would be used later. Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Taehee Yoo authored
When the amt module is being removed, it calls cancel_delayed_work() to cancel pending delayed_work. But this function doesn't wait for canceling delayed_work. So, workers can be still doing after module delete. In order to avoid this, cancel_delayed_work_sync() should be used instead. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: bc54e49c ("amt: add multicast(IGMP) report message handler") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20211116160923.25258-1-ap420073@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pavel Skripkin authored
I've sent a patch to GR-everest-linux-l2@marvell.com few days ago and got a reply from postmaster@marvell.com: Delivery has failed to these recipients or groups: gr-everest-linux-l2@marvell.com<mailto:gr-everest-linux-l2@marvell.com> The email address you entered couldn't be found. Please check the recipient's email address and try to resend the message. If the problem continues, please contact your helpdesk. As requested by Alok Prasad, replacing GR-everest-linux-l2@marvell.com with Manish Chopra's email address. [0] Link: https://lore.kernel.org/all/20211116081601.11208-1-palok@marvell.com/ [0] Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20211116141303.32180-1-paskripkin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Michael Chan authored
bp->sriov_cfg is not defined when CONFIG_BNXT_SRIOV is not set. Fix it by adding a helper function bnxt_sriov_cfg() to handle the logic with or without the config option. Fixes: 46d08f55 ("bnxt_en: extend RTNL to VF check in devlink driver_reinit") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1637090770-22835-1-git-send-email-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Marcin Wojtas authored
The kernel test robot reported a following issue: >> drivers/net/ethernet/marvell/mvmdio.c:426:36: warning: unused variable 'orion_mdio_acpi_match' [-Wunused-const-variable] static const struct acpi_device_id orion_mdio_acpi_match[] = { ^ 1 warning generated. Fix that by surrounding the variable by appropriate ifdef. Fixes: c54da4c1 ("net: mvmdio: add ACPI support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211115153024.209083-1-mw@semihalf.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'mac80211-for-net-2021-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Couple of fixes: * bad dont-reorder check * throughput LED trigger for various new(ish) paths * radiotap header generation * locking assertions in mac80211 with monitor mode * radio statistics * don't try to access IV when not present * call stop_ap for P2P_GO as well as we should * tag 'mac80211-for-net-2021-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: fix throughput LED trigger mac80211: fix monitor_sdata RCU/locking assertions mac80211: drop check for DONT_REORDER in __ieee80211_select_queue mac80211: fix radiotap header generation mac80211: do not access the IV when it was stripped nl80211: fix radio statistics in survey dump cfg80211: call cfg80211_stop_ap when switch from P2P_GO type ==================== Link: https://lore.kernel.org/r/20211116160845.157214-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-11-16 We've added 12 non-merge commits during the last 5 day(s) which contain a total of 23 files changed, 573 insertions(+), 73 deletions(-). The main changes are: 1) Fix pruning regression where verifier went overly conservative rejecting previsouly accepted programs, from Alexei Starovoitov and Lorenz Bauer. 2) Fix verifier TOCTOU bug when using read-only map's values as constant scalars during verification, from Daniel Borkmann. 3) Fix a crash due to a double free in XSK's buffer pool, from Magnus Karlsson. 4) Fix libbpf regression when cross-building runqslower, from Jean-Philippe Brucker. 5) Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_*() helpers in tracing programs due to deadlock possibilities, from Dmitrii Banshchikov. 6) Fix checksum validation in sockmap's udp_read_sock() callback, from Cong Wang. 7) Various BPF sample fixes such as XDP stats in xdp_sample_user, from Alexander Lobakin. 8) Fix libbpf gen_loader error handling wrt fd cleanup, from Kumar Kartikeya Dwivedi. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: udp: Validate checksum in udp_read_sock() bpf: Fix toctou on read-only map's constant scalar tracking samples/bpf: Fix build error due to -isystem removal selftests/bpf: Add tests for restricted helpers bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs libbpf: Perform map fd cleanup for gen_loader in case of error samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu tools/runqslower: Fix cross-build samples/bpf: Fix summary per-sec stats in xdp_sample_user selftests/bpf: Check map in map pruning bpf: Fix inner map state pruning regression. xsk: Fix crash on double free in buffer pool ==================== Link: https://lore.kernel.org/r/20211116141134.6490-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 16 Nov, 2021 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-11-15 This series contains updates to iavf driver only. Mateusz adds a wait for reset completion when changing queue count which could otherwise cause issues with VF reset. Nick adds a null check for vf_res in iavf_fix_features(), corrects ordering of function calls to resolve dependency issues, and prevents possible freeing of a lock which isn't being held. Piotr fixes logic that did not allow setting all multicast mode without promiscuous mode. Jake prevents possible accidental freeing of filter structure. Mitch adds null checks for key and indir parameters in iavf_get_rxfh(). Surabhi adds an additional check that would, previously, cause the driver to print a false error due to values obtained while the VF is in reset. Grzegorz prevents a queue request of 0 which would cause queue count to reset to default values. Akeem restores VLAN filters when bringing the interface back up. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
It turns out the skb's in sock receive queue could have bad checksums, as both ->poll() and ->recvmsg() validate checksums. We have to do the same for ->read_sock() path too before they are redirected in sockmap. Fixes: d7f57118 ("udp: Implement ->read_sock() for sockmap") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211115044006.26068-1-xiyou.wangcong@gmail.com
-
Daniel Borkmann authored
Commit a23740ec ("bpf: Track contents of read-only maps as scalars") is checking whether maps are read-only both from BPF program side and user space side, and then, given their content is constant, reading out their data via map->ops->map_direct_value_addr() which is then subsequently used as known scalar value for the register, that is, it is marked as __mark_reg_known() with the read value at verification time. Before a23740ec, the register content was marked as an unknown scalar so the verifier could not make any assumptions about the map content. The current implementation however is prone to a TOCTOU race, meaning, the value read as known scalar for the register is not guaranteed to be exactly the same at a later point when the program is executed, and as such, the prior made assumptions of the verifier with regards to the program will be invalid which can cause issues such as OOB access, etc. While the BPF_F_RDONLY_PROG map flag is always fixed and required to be specified at map creation time, the map->frozen property is initially set to false for the map given the map value needs to be populated, e.g. for global data sections. Once complete, the loader "freezes" the map from user space such that no subsequent updates/deletes are possible anymore. For the rest of the lifetime of the map, this freeze one-time trigger cannot be undone anymore after a successful BPF_MAP_FREEZE cmd return. Meaning, any new BPF_* cmd calls which would update/delete map entries will be rejected with -EPERM since map_get_sys_perms() removes the FMODE_CAN_WRITE permission. This also means that pending update/delete map entries must still complete before this guarantee is given. This corner case is not an issue for loaders since they create and prepare such program private map in successive steps. However, a malicious user is able to trigger this TOCTOU race in two different ways: i) via userfaultfd, and ii) via batched updates. For i) userfaultfd is used to expand the competition interval, so that map_update_elem() can modify the contents of the map after map_freeze() and bpf_prog_load() were executed. This works, because userfaultfd halts the parallel thread which triggered a map_update_elem() at the time where we copy key/value from the user buffer and this already passed the FMODE_CAN_WRITE capability test given at that time the map was not "frozen". Then, the main thread performs the map_freeze() and bpf_prog_load(), and once that had completed successfully, the other thread is woken up to complete the pending map_update_elem() which then changes the map content. For ii) the idea of the batched update is similar, meaning, when there are a large number of updates to be processed, it can increase the competition interval between the two. It is therefore possible in practice to modify the contents of the map after executing map_freeze() and bpf_prog_load(). One way to fix both i) and ii) at the same time is to expand the use of the map's map->writecnt. The latter was introduced in fc970227 ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY") and further refined in 1f6cb19b ("bpf: Prevent re-mmap()'ing BPF map as writable for initially r/o mapping") with the rationale to make a writable mmap()'ing of a map mutually exclusive with read-only freezing. The counter indicates writable mmap() mappings and then prevents/fails the freeze operation. Its semantics can be expanded beyond just mmap() by generally indicating ongoing write phases. This would essentially span any parallel regular and batched flavor of update/delete operation and then also have map_freeze() fail with -EBUSY. For the check_mem_access() in the verifier we expand upon the bpf_map_is_rdonly() check ensuring that all last pending writes have completed via bpf_map_write_active() test. Once the map->frozen is set and bpf_map_write_active() indicates a map->writecnt of 0 only then we are really guaranteed to use the map's data as known constants. For map->frozen being set and pending writes in process of still being completed we fall back to marking that register as unknown scalar so we don't end up making assumptions about it. With this, both TOCTOU reproducers from i) and ii) are fixed. Note that the map->writecnt has been converted into a atomic64 in the fix in order to avoid a double freeze_mutex mutex_{un,}lock() pair when updating map->writecnt in the various map update/delete BPF_* cmd flavors. Spanning the freeze_mutex over entire map update/delete operations in syscall side would not be possible due to then causing everything to be serialized. Similarly, something like synchronize_rcu() after setting map->frozen to wait for update/deletes to complete is not possible either since it would also have to span the user copy which can sleep. On the libbpf side, this won't break d66562fb ("libbpf: Add BPF object skeleton support") as the anonymous mmap()-ed "map initialization image" is remapped as a BPF map-backed mmap()-ed memory where for .rodata it's non-writable. Fixes: a23740ec ("bpf: Track contents of read-only maps as scalars") Reported-by: w1tcher.bupt@gmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Alexander Lobakin authored
Since recent Kbuild updates we no longer include files from compiler directories. However, samples/bpf/hbm_kern.h hasn't been tuned for this (LLVM 13): CLANG-bpf samples/bpf/hbm_out_kern.o In file included from samples/bpf/hbm_out_kern.c:55: samples/bpf/hbm_kern.h:12:10: fatal error: 'stddef.h' file not found ^~~~~~~~~~ 1 error generated. CLANG-bpf samples/bpf/hbm_edt_kern.o In file included from samples/bpf/hbm_edt_kern.c:53: samples/bpf/hbm_kern.h:12:10: fatal error: 'stddef.h' file not found ^~~~~~~~~~ 1 error generated. It is enough to just drop both stdbool.h and stddef.h from includes to fix those. Fixes: 04e85bbf ("isystem: delete global -isystem compile option") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://lore.kernel.org/bpf/20211115130741.3584-1-alexandr.lobakin@intel.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
Alexei Starovoitov authored
Dmitrii Banshchikov says: ==================== Various locking issues are possible with bpf_ktime_get_coarse_ns() and bpf_timer_* set of helpers. syzbot found a locking issue with bpf_ktime_get_coarse_ns() helper executed in BPF_PROG_TYPE_PERF_EVENT prog type - [1]. The issue is possible because the helper uses non fast version of time accessor that isn't safe for any context. The helper was added because it provided performance benefits in comparison to bpf_ktime_get_ns() helper. A similar locking issue is possible with bpf_timer_* set of helpers when used in tracing progs. The solution is to restrict use of the helpers in tracing progs. In the [1] discussion it was stated that bpf_spin_lock related helpers shall also be excluded for tracing progs. The verifier has a compatibility check between a map and a program. If a tracing program tries to use a map which value has struct bpf_spin_lock the verifier fails that is why bpf_spin_lock is already restricted. Patch 1 restricts helpers Patch 2 adds tests v1 -> v2: * Limit the helpers via func proto getters instead of allowed callback * Add note about helpers' restrictions to linux/bpf.h * Add Fixes tag * Remove extra \0 from btf_str_sec * Beside asm tests add prog tests * Trim CC 1. https://lore.kernel.org/all/00000000000013aebd05cff8e064@google.com/ ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Dmitrii Banshchikov authored
This patch adds tests that bpf_ktime_get_coarse_ns(), bpf_timer_* and bpf_spin_lock()/bpf_spin_unlock() helpers are forbidden in tracing progs as their use there may result in various locking issues. Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211113142227.566439-3-me@ubique.spb.ru
-
Dmitrii Banshchikov authored
Use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in tracing progs may result in locking issues. bpf_ktime_get_coarse_ns() uses ktime_get_coarse_ns() time accessor that isn't safe for any context: ====================================================== WARNING: possible circular locking dependency detected 5.15.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.4/14877 is trying to acquire lock: ffffffff8cb30008 (tk_core.seq.seqcount){----}-{0:0}, at: ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255 but task is already holding lock: ffffffff90dbf200 (&obj_hash[i].lock){-.-.}-{2:2}, at: debug_object_deactivate+0x61/0x400 lib/debugobjects.c:735 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&obj_hash[i].lock){-.-.}-{2:2}: lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd1/0x120 kernel/locking/spinlock.c:162 __debug_object_init+0xd9/0x1860 lib/debugobjects.c:569 debug_hrtimer_init kernel/time/hrtimer.c:414 [inline] debug_init kernel/time/hrtimer.c:468 [inline] hrtimer_init+0x20/0x40 kernel/time/hrtimer.c:1592 ntp_init_cmos_sync kernel/time/ntp.c:676 [inline] ntp_init+0xa1/0xad kernel/time/ntp.c:1095 timekeeping_init+0x512/0x6bf kernel/time/timekeeping.c:1639 start_kernel+0x267/0x56e init/main.c:1030 secondary_startup_64_no_verify+0xb1/0xbb -> #0 (tk_core.seq.seqcount){----}-{0:0}: check_prev_add kernel/locking/lockdep.c:3051 [inline] check_prevs_add kernel/locking/lockdep.c:3174 [inline] validate_chain+0x1dfb/0x8240 kernel/locking/lockdep.c:3789 __lock_acquire+0x1382/0x2b00 kernel/locking/lockdep.c:5015 lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625 seqcount_lockdep_reader_access+0xfe/0x230 include/linux/seqlock.h:103 ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255 ktime_get_coarse include/linux/timekeeping.h:120 [inline] ktime_get_coarse_ns include/linux/timekeeping.h:126 [inline] ____bpf_ktime_get_coarse_ns kernel/bpf/helpers.c:173 [inline] bpf_ktime_get_coarse_ns+0x7e/0x130 kernel/bpf/helpers.c:171 bpf_prog_a99735ebafdda2f1+0x10/0xb50 bpf_dispatcher_nop_func include/linux/bpf.h:721 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] BPF_PROG_RUN_ARRAY include/linux/bpf.h:1294 [inline] trace_call_bpf+0x2cf/0x5d0 kernel/trace/bpf_trace.c:127 perf_trace_run_bpf_submit+0x7b/0x1d0 kernel/events/core.c:9708 perf_trace_lock+0x37c/0x440 include/trace/events/lock.h:39 trace_lock_release+0x128/0x150 include/trace/events/lock.h:58 lock_release+0x82/0x810 kernel/locking/lockdep.c:5636 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:149 [inline] _raw_spin_unlock_irqrestore+0x75/0x130 kernel/locking/spinlock.c:194 debug_hrtimer_deactivate kernel/time/hrtimer.c:425 [inline] debug_deactivate kernel/time/hrtimer.c:481 [inline] __run_hrtimer kernel/time/hrtimer.c:1653 [inline] __hrtimer_run_queues+0x2f9/0xa60 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x3b3/0x1040 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0xf9/0x270 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8c/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline] _raw_spin_unlock_irqrestore+0xd4/0x130 kernel/locking/spinlock.c:194 try_to_wake_up+0x702/0xd20 kernel/sched/core.c:4118 wake_up_process kernel/sched/core.c:4200 [inline] wake_up_q+0x9a/0xf0 kernel/sched/core.c:953 futex_wake+0x50f/0x5b0 kernel/futex/waitwake.c:184 do_futex+0x367/0x560 kernel/futex/syscalls.c:127 __do_sys_futex kernel/futex/syscalls.c:199 [inline] __se_sys_futex+0x401/0x4b0 kernel/futex/syscalls.c:180 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae There is a possible deadlock with bpf_timer_* set of helpers: hrtimer_start() lock_base(); trace_hrtimer...() perf_event() bpf_run() bpf_timer_start() hrtimer_start() lock_base() <- DEADLOCK Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in BPF_PROG_TYPE_KPROBE, BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT and BPF_PROG_TYPE_RAW_TRACEPOINT prog types. Fixes: d0551261 ("bpf: Add bpf_ktime_get_coarse_ns helper") Fixes: b00628b1 ("bpf: Introduce bpf timers.") Reported-by: syzbot+43fd005b5a1b4d10781e@syzkaller.appspotmail.com Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211113142227.566439-2-me@ubique.spb.ru
-
- 15 Nov, 2021 16 commits
-
-
Akeem G Abodunrin authored
Restore VLAN filters after the link is brought down, and up - since all filters are deleted from HW during the netdev link down routine. Fixes: ed1f5b58 ("i40evf: remove VLAN filters on close") Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Grzegorz Szczurek authored
Now setting combine to 0 will be rejected with the appropriate error code. This has been implemented by adding a condition that checks the value of combine equal to zero. Without this patch, when the user requested it, no error was returned and combine was set to the default value for VF. Fixes: 5520deb1 ("iavf: Enable support for up to 16 queues") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Surabhi Boob authored
While issuing VF Reset from the guest OS, the VF driver prints logs about critical / Overflow error detection. This is not an actual error since the VF_MBX_ARQLEN register is set to all FF's for a short period of time and the VF would catch the bits set if it was reading the register during that spike of time. This patch introduces an additional check to ignore this condition since the VF is in reset. Fixes: 19b73d8e ("i40evf: Add additional check for reset") Signed-off-by: Surabhi Boob <surabhi.boob@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Mitch Williams authored
In some cases, the ethtool get_rxfh handler may be called with a null key or indir parameter. So check these pointers, or you will have a very bad day. Fixes: 43a3d9ba ("i40evf: Allow PF driver to configure RSS") Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jacob Keller authored
In iavf_config_clsflower, the filter structure could be accidentally released at the end, if iavf_parse_cls_flower or iavf_handle_tclass ever return a non-zero but positive value. In this case, the function continues through to the end, and will call kfree() on the filter structure even though it has been added to the linked list. This can actually happen because iavf_parse_cls_flower will return a positive IAVF_ERR_CONFIG value instead of the traditional negative error codes. Fix this by ensuring that the kfree() check and error checks are similar. Use the more idiomatic "if (err)" to catch all non-zero error codes. Fixes: 0075fa0f ("i40evf: Add support to apply cloud filters") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Piotr Marczak authored
The driver could only quit allmulti when allmulti and promisc modes are turn on at the same time. If promisc had been off there was no way to turn off allmulti mode. The patch corrects this behavior. Switching allmulti does not depends on promisc state mode anymore Fixes: f42a5c74 ("i40e: Add allmulti support for the VF") Signed-off-by: Piotr Marczak <piotr.marczak@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Nicholas Nunley authored
In iavf_configure_clsflower() the function will bail out if it is unable to obtain the crit_section lock in a reasonable time. However, it will clear the lock when exiting, so fix this. Fixes: 640a8af5 ("i40evf: Reorder configure_clsflower to avoid deadlock on error") Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Nicholas Nunley authored
iavf_free_queues() clears adapter->num_active_queues, which iavf_free_q_vectors() relies on, so swap the order of these two function calls in iavf_disable_vf(). This resolves a panic encountered when the interface is disabled and then later brought up again after PF communication is restored. Fixes: 65c7006f ("i40evf: assign num_active_queues inside i40evf_alloc_queues") Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Nicholas Nunley authored
If the driver has lost contact with the PF then it enters a disabled state and frees adapter->vf_res. However, ndo_fix_features can still be called on the interface, so we need to check for this condition first. Since we have no information on the features at this time simply leave them unmodified and return. Fixes: c4445aed ("i40evf: Fix VLAN features") Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Mateusz Palczewski authored
Fixed return correct code from set the new channel count. Implemented by check if reset is done in appropriate time. This solution give a extra time to pf for reset vf in case when user want set new channel count for all vfs. Without this patch it is possible to return misleading output code to user and vf reset not to be correctly performed by pf. Fixes: 5520deb1 ("iavf: Enable support for up to 16 queues") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Wen Gu authored
The link_id is supposed to be unique, but smcr_next_link_id() doesn't skip the used link_id as expected. So the patch fixes this. Fixes: 026c381f ("net/smc: introduce link_idx for link group array") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tetsuo Handa authored
sk_clone_lock() needs to call sock_inuse_add(1) before entering the sk_free_unlock_clone() error path, for __sk_free() from sk_free() from sk_free_unlock_clone() calls sock_inuse_add(-1). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 648845ab ("sock: Move the socket inuse to namespace.") Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
The MSG_CRYPTO msgs are always encrypted and sent to other nodes for keys' deployment. But when receiving in peers, if those nodes do not validate it and make sure it's encrypted, one could craft a malicious MSG_CRYPTO msg to deploy its key with no need to know other nodes' keys. This patch is to do that by checking TIPC_SKB_CB(skb)->decrypted and discard it if this packet never got decrypted. Note that this is also a supplementary fix to CVE-2021-43267 that can be triggered by an unencrypted malicious MSG_CRYPTO msg. Fixes: 1ef6f7c9 ("tipc: add automatic session key exchange") Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
liuguoqiang authored
When kmemdup called failed and register_net_sysctl return NULL, should return ENOMEM instead of ENOBUFS Signed-off-by: liuguoqiang <liuguoqiang@uniontech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Meng Li authored
According to upstream commit 5ec55823("net: stmmac: add clocks management for gmac driver"), it improve clocks management for stmmac driver. So, it is necessary to implement the runtime callback in dwmac-socfpga driver because it doesn't use the common stmmac_pltfr_pm_ops instance. Otherwise, clocks are not disabled when system enters suspend status. Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes This series includes 3 fixes. The first one fixes a race condition between devlink reload and SR-IOV configuration. The second one fixes a type mismatch warning in devlink fw live patching. The last one fixes unwanted OVS TC dmesg error logs when tc-hw-offload is disabled on bnxt_en. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-