- 05 Jun, 2018 12 commits
-
-
Dave Chinner authored
commit a78ee256 upstream. The AGFL size calculation is about to get more complex, so lets turn the macro into a function first and remove the macro. Signed-off-by:
Dave Chinner <dchinner@redhat.com> [darrick: forward port to newer kernel, simplify the helper] Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dexuan Cui authored
commit de0aa7b2 upstream. 1. With the patch "x86/vector/msi: Switch to global reservation mode", the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM with SR-IOV. This is because when we reach hv_compose_msi_msg() by request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup() -> __irq_startup() -> irq_domain_activate_irq() -> ... -> msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is disabled in __setup_irq(). Note: when we reach hv_compose_msi_msg() by another code path: pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... -> hv_compose_msi_msg(), local irq is not disabled. hv_compose_msi_msg() depends on an interrupt from the host. With interrupts disabled, a UP VM always hangs in the busy loop in the function, because the interrupt callback hv_pci_onchannelcallback() can not be called. We can do nothing but work it around by polling the channel. This is ugly, but we don't have any other choice. 2. If the host is ejecting the VF device before we reach hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg() forever, because at this time the host doesn't respond to the CREATE_INTERRUPT request. This issue exists the first day the pci-hyperv driver appears in the kernel. Luckily, this can also by worked around by polling the channel for the PCI_EJECT message and hpdev->state, and by checking the PCI vendor ID. Note: actually the above 2 issues also happen to a SMP VM, if "hbus->hdev->channel->target_cpu == smp_processor_id()" is true. Fixes: 4900be83 ("x86/vector/msi: Switch to global reservation mode") Tested-by:
Adrian Suhov <v-adsuho@microsoft.com> Tested-by:
Chris Valean <v-chvale@microsoft.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Acked-by:
Haiyang Zhang <haiyangz@microsoft.com> Cc: <stable@vger.kernel.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jack Morgenstein <jackm@mellanox.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit bd36ea57 which is commit a7aa75a2 upstream. There's been too many complaints about this. Personally I think it's going to blow up when people hit this in mainline, but hey, it's not my systems. At least we don't have to backport the mess to the stable kernels to give them some more life to live unscathed :) Reported-by:
Timur Tabi <timur@codeaurora.org> Reported-by:
Sebastian Gottschall <s.gottschall@dd-wrt.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Borislav Petkov authored
commit 78ce2410 upstream. ... into a global, two-dimensional array and service subsequent reads from that cache to avoid rdmsr_on_cpu() calls during CPU hotplug (IPIs with IRQs disabled). In addition, this fixes a KASAN slab-out-of-bounds read due to wrong usage of the bank->blocks pointer. Fixes: 27bd5950 ("x86/mce/AMD: Get address from already initialized block") Reported-by:
Johannes Hirte <johannes.hirte@datenkhaos.de> Tested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20180414004230.GA2033@probookSigned-off-by:
-
Yazen Ghannam authored
commit 8a331f4a upstream. Carve out the SMCA code in get_block_address() into a separate helper function. No functional change. Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> [ Save an indentation level. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Josh Poimboeuf authored
commit 0afd0d9e upstream. Objtool has some crude logic for detecting static "noreturn" functions (aka "dead ends"). This is necessary for being able to correctly follow GCC code flow when such functions are called. It's remotely possible for two functions to call each other via sibling calls. If they don't have RET instructions, objtool's noreturn detection logic goes into a recursive loop: drivers/char/ipmi/ipmi_ssif.o: warning: objtool: return_hosed_msg()+0x0: infinite recursion (objtool bug!) drivers/char/ipmi/ipmi_ssif.o: warning: objtool: deliver_recv_msg()+0x0: infinite recursion (objtool bug!) Instead of reporting an error in this case, consider the functions to be non-dead-ends. Reported-and-tested-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: damian <damian.tometzki@icloud.com> Link: http://lkml.kernel.org/r/7cc156408c5781a1f62085d352ced1fe39fe2f91.1525923412.git.jpoimboe@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
commit 7dec80cc upstream. With the following commit: fd35c88b ("objtool: Support GCC 8 switch tables") I added a "can't find switch jump table" warning, to stop covering up silent failures if add_switch_table() can't find anything. That warning found yet another bug in the objtool switch table detection logic. For cases 1 and 2 (as described in the comments of find_switch_table()), the find_symbol_containing() check doesn't adjust the offset for RIP-relative switch jumps. Incidentally, this bug was already fixed for case 3 with: 6f5ec299 ("objtool: Detect RIP-relative switch table references") However, that commit missed the fix for cases 1 and 2. The different cases are now starting to look more and more alike. So fix the bug by consolidating them into a single case, by checking the original dynamic jump instruction in the case 3 loop. This also simplifies the code and makes it more robust against future switch table detection issues -- of which I'm sure there will be many... Switch table detection has been the most fragile area of objtool, by far. I long for the day when we'll have a GCC plugin for annotating switch tables. Linus asked me to delay such a plugin due to the flakiness of the plugin infrastructure in older versions of GCC, so this rickety code is what we're stuck with for now. At least the code is now a little simpler than it was. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 6f5ec299 upstream. Typically a switch table can be found by detecting a .rodata access followed an indirect jump: 1969: 4a 8b 0c e5 00 00 00 mov 0x0(,%r12,8),%rcx 1970: 00 196d: R_X86_64_32S .rodata+0x438 1971: e9 00 00 00 00 jmpq 1976 <dispc_runtime_suspend+0xb6a> 1972: R_X86_64_PC32 __x86_indirect_thunk_rcx-0x4 Randy Dunlap reported a case (seen with GCC 4.8) where the .rodata access uses RIP-relative addressing: 19bd: 48 8b 3d 00 00 00 00 mov 0x0(%rip),%rdi # 19c4 <dispc_runtime_suspend+0xbb8> 19c0: R_X86_64_PC32 .rodata+0x45c 19c4: e9 00 00 00 00 jmpq 19c9 <dispc_runtime_suspend+0xbbd> 19c5: R_X86_64_PC32 __x86_indirect_thunk_rdi-0x4 In this case the relocation addend needs to be adjusted accordingly in order to find the location of the switch table. The fix is for case 3 (as described in the comments), but also make the existing case 1 & 2 checks more precise by only adjusting the addend for R_X86_64_PC32 relocations. This fixes the following warnings: drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_suspend()+0xbb8: sibling call from callable instruction with modified stack frame drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_resume()+0xcc5: sibling call from callable instruction with modified stack frame Reported-by:
-
Josh Poimboeuf authored
commit fd35c88b upstream. With GCC 8, some issues were found with the objtool switch table detection. 1) In the .rodata section, immediately after the switch table, there can be another object which contains a pointer to the function which had the switch statement. In this case objtool wrongly considers the function pointer to be part of the switch table. Fix it by: a) making sure there are no pointers to the beginning of the function; and b) making sure there are no gaps in the switch table. Only the former was needed, the latter adds additional protection for future optimizations. 2) In find_switch_table(), case 1 and case 2 are missing the check to ensure that the .rodata switch table data is anonymous, i.e. that it isn't already associated with an ELF symbol. Fix it by adding the same find_symbol_containing() check which is used for case 3. This fixes the following warnings with GCC 8: drivers/block/virtio_blk.o: warning: objtool: virtio_queue_rq()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+72 net/ipv6/icmp.o: warning: objtool: icmpv6_rcv()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64 drivers/usb/core/quirks.o: warning: objtool: quirks_param_set()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+48 drivers/mtd/nand/raw/nand_hynix.o: warning: objtool: hynix_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+24 drivers/mtd/nand/raw/nand_samsung.o: warning: objtool: samsung_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+32 drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.o: warning: objtool: gk104_top_oneinit()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64 Reported-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
-
Josh Poimboeuf authored
commit 13810435 upstream. GCC 8 moves a lot of unlikely code out of line to "cold" subfunctions in .text.unlikely. Properly detect the new subfunctions and treat them as extensions of the original functions. This fixes a bunch of warnings like: kernel/cgroup/cgroup.o: warning: objtool: parse_cgroup_root_flags()+0x33: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: cgroup_addrm_files()+0x290: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: cgroup_apply_control_enable()+0x25b: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: rebind_subsystems()+0x325: sibling call from callable instruction with modified stack frame Reported-and-tested-by:
damian <damian.tometzki@icloud.com> Reported-by:
-
Hugh Dickins authored
commit 145e1a71 upstream. George Boole would have noticed a slight error in 4.16 commit 69d763fc ("mm: pin address_space before dereferencing it while isolating an LRU page"). Fix it, to match both the comment above it, and the original behaviour. Although anonymous pages are not marked PageDirty at first, we have an old habit of calling SetPageDirty when a page is removed from swap cache: so there's a category of ex-swap pages that are easily migratable, but were inadvertently excluded from compaction's async migration in 4.16. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805302014001.12558@eggly.anvils Fixes: 69d763fc ("mm: pin address_space before dereferencing it while isolating an LRU page") Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Reported-by:
Ivan Kalvachev <ikalvachev@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
commit 4faa9996 upstream. If io_destroy() gets to cancelling everything that can be cancelled and gets to kiocb_cancel() calling the function driver has left in ->ki_cancel, it becomes vulnerable to a race with IO completion. At that point req is already taken off the list and aio_complete() does *NOT* spin until we (in free_ioctx_users()) releases ->ctx_lock. As the result, it proceeds to kiocb_free(), freing req just it gets passed to ->ki_cancel(). Fix is simple - remove from the list after the call of kiocb_cancel(). All instances of ->ki_cancel() already have to cope with the being called with iocb still on list - that's what happens in io_cancel(2). Cc: stable@kernel.org Fixes: 0460fef2 "aio: use cancellation list lazily" Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
- 30 May, 2018 28 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 5815901c which is 03080e5e ("vti4: Don't override MTU passed on link creation via IFLA_MTU") upstream as it causes test failures. This commit should not have been backported to anything older than 4.16, despite what the changelog said as the mtu must be set in older kernels, unlike is needed in 4.16 and newer. Thanks to Alistair Strachan for the debugging help figuring this out, and for 'git bisect' for making my life a whole lot easier. Cc: Alistair Strachan <astrachan@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit f766148e which is commit ad46e48c upstream. It breaks the build. Turns out we don't test perf on stable releases, we need to fix that :( Reported-by:
Pavlos Parissis <pavlos.parissis@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Greg Kroah-Hartman authored
perf wants matching .h files otherwise it complains during the build process. As these files have been modified over the past few 4.14.y releases, they are out of sync, so fix that problem by properly copying the respective versions to the tools/ mirror copies. Signed-off-by: -
Ravi Bangoria authored
commit 2fe2230d upstream. No functionality changes. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20180130053053.13214-2-ravi.bangoria@linux.vnet.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
-
Deepak Rawat authored
commit 91ba9f28 upstream. SOU primary plane prepare_fb hook depends upon dmabuf_size to pin up BO (and not call a new vmw_dmabuf_init) when a new fb size is same as current fb. This was changed in a recent commit which is causing page_flip to fail on VM with low display memory and multi-mon failure when cycle monitors from secondary display. Cc: <stable@vger.kernel.org> # 4.14, 4.16 Fixes: 20fb5a63 ("drm/vmwgfx: Unpin the screen object backup buffer when not used") Signed-off-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 1e0ce03b ] The "mdr" command should repeat (continue) when only Enter/Return is pressed, so make it do so. Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Jan Kundrát authored
[ Upstream commit 9b3e4207 ] The SPI version of this chip allows several devices to be present on the same SPI bus via a local address. If this is in action and if the kernel has debugfs, however, the code attempts to create duplicate entries for the regmap's debugfs: mcp23s08 spi1.1: Failed to create debugfs directory This patch simply assigns a local name matching the device logical address to the `struct regmap_config`. No changes are needed for MCP23S18 because that device does not support any logical addressing. Similarly, I2C devices do not need any action, either, because they are already different in their I2C address. A similar problem is present for the pinctrl debugfs instance, but that one is not addressed by this patch. Signed-off-by:
Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
[ Upstream commit a7aa75a2 ] The base of the TLMM gpiochip should not be statically defined as 0, fix this to not artificially restrict the existence of multiple pinctrl-msm devices. Fixes: f365be09 ("pinctrl: Add Qualcomm TLMM driver") Reported-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 30966861 ] If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must release the reference on the current 'child' node before returning. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit d4b78db6 ] The HDMI encoder is connected to the RGB output of the DU, which is port@0, not port@1. Fix the incorrect DT description. Fixes: c5af8a42 ("ARM: dts: porter: add DU DT support") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Aapo Vienamo authored
[ Upstream commit 2bada7ac ] The missing last digit of the CONFIG values is added. Looks like a typo of some sort when comparing to the downstream dt. This fixes intermittent behavior behaviour of the ethernet controllers. Signed-off-by:
Aapo Vienamo <aapo@tuxera.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Filip Sadowski authored
[ Upstream commit 1fa51a65 ] This patch adds necessary delay for 4.33 firmware to recover after EMP reset. Without this patch driver occasionally reinitializes structures too quickly to communicate with firmware after EMP reset causing AdminQ to timeout. Signed-off-by:
Filip Sadowski <filip.sadowski@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 71df1793 ] The cache pointer points to the actual memory used by the cache, as the comparison here is looking for the type of the cache it should check against cache_type. Fixes: 1ea975cf ("regmap: Add a function to check if a regmap register is cached") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Peter Rosin authored
[ Upstream commit 7981190f ] The used part does contain an eeprom compatible with an Atmel 24c02 chip and it is from NXP, but it is not called 24c02. It's actually a se97b chip. Adjust the compatible accordingly. Fixes: 21dd0ece ("ARM: dts: at91: add devicetree for the Axentia TSE-850") Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit 8525d04b ] According to the latest revision 2.00 of the R-Car Gen2 manual, the LVDS and the bias circuit must be enabled after the LVDS I/O pins are enabled, not before. Fix the Gen2 LVDS startup sequence accordingly. While at it, also fix the comment preceding the first LVDCR0 write that still talks about hardcoding the LVDS mode 0. Fixes: 90374b5c ("drm/rcar-du: Add internal LVDS encoder support") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
-
Sergei Shtylyov authored
[ Upstream commit 796ceb92 ] According to the latest revisions of the R-Car Gen3 manual, the LVDS mode must be set before the LVDS I/O pins are enabled, not after -- fix the Gen3 LVDS startup sequence accordingly. Fixes: e947eccb ("drm: rcar-du: Add support for LVDS mode selection") Signed-off-by:
-
Richard Haines authored
[ Upstream commit 213d7f94 ] When resolving a fallback label, check the sk_buff version as it is possible (e.g. SCTP) to have family = PF_INET6 while receiving ip_hdr(skb)->version = 4. Signed-off-by:
Richard Haines <richard_c_haines@btinternet.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Prashant Bhole authored
[ Upstream commit ddd00103 ] eBPF test fails due to verifier failure because log_buf is too small. Fixed by increasing log_buf size Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit fdf7c49c ] When we strip the perf binary, dwarf unwind test stop to work. The reason is that strip will remove static function symbols, which we need to check for unwind. This change will keep this test working in cases where the global symbols are put into dynamic symbol table, which is the case on x86. It still won't work on powerpc. Making those 5 local functions global, and adding 'test_dwarf_unwind__' to their names. Committer testing: Before: # perf test dwarf 58: DWARF unwind : Ok # strip ~/bin/perf # perf test dwarf 58: DWARF unwind : FAILED! # perf test -v dwarf 58: DWARF unwind : --- start --- test child forked, pid 6590 unwind: thread map already set, dso=/home/acme/bin/perf <SNIP> unwind: access_mem addr 0x7ffce6c48098 val 48563f, offset 1144 unwind: test__dwarf_unwind:ip = 0x4a54e5 (0xa54e5) got: test__dwarf_unwind 0xa54e5, expecting test__dwarf_unwind unwind: '':ip = 0x4a50bb (0xa50bb) failed: got unresolved address 0xa50bb unwind failed test child finished with -1 ---- end ---- DWARF unwind: FAILED! # After: # perf test dwarf 58: DWARF unwind : Ok # strip ~/bin/perf # perf test dwarf 58: DWARF unwind : Ok # # perf test -v dwarf 58: DWARF unwind : --- start --- test child forked, pid 7219 unwind: thread map already set, dso=/home/acme/bin/perf <SNIP> unwind: access_mem addr 0x7fff007da2c8 val 48575f, offset 1144 unwind: test__arch_unwind_sample:ip = 0x589044 (0x189044) got: test__arch_unwind_sample 0x189044, expecting test__arch_unwind_sample unwind: test_dwarf_unwind__thread:ip = 0x4a52f7 (0xa52f7) got: test_dwarf_unwind__thread 0xa52f7, expecting test_dwarf_unwind__thread unwind: test_dwarf_unwind__compare:ip = 0x4a5468 (0xa5468) got: test_dwarf_unwind__compare 0xa5468, expecting test_dwarf_unwind__compare unwind: bsearch:ip = 0x7f6608ae94d8 (0x394d8) got: bsearch 0x394d8, expecting bsearch unwind: test_dwarf_unwind__krava_3:ip = 0x4a54d1 (0xa54d1) got: test_dwarf_unwind__krava_3 0xa54d1, expecting test_dwarf_unwind__krava_3 unwind: test_dwarf_unwind__krava_2:ip = 0x4a550b (0xa550b) got: test_dwarf_unwind__krava_2 0xa550b, expecting test_dwarf_unwind__krava_2 unwind: test_dwarf_unwind__krava_1:ip = 0x4a554b (0xa554b) got: test_dwarf_unwind__krava_1 0xa554b, expecting test_dwarf_unwind__krava_1 unwind: test__dwarf_unwind:ip = 0x4a5605 (0xa5605) got: test__dwarf_unwind 0xa5605, expecting test__dwarf_unwind test child finished with 0 ---- end ---- DWARF unwind: Ok # Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Jiri Olsa authored
[ Upstream commit e3ebaa46 ] Jin Yao reported memory corrupton in perf report with branch info used for stack trace: > Following command lines will cause perf crash. > perf record -j call -g -a <application> > perf report --branch-history > > *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 *** > ======= Backtrace: ========= > /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725] > /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a] > /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc] > perf[0x51b914] > perf(hist_entry_iter__add+0x1e5)[0x51f305] > perf[0x43cf01] > perf[0x4fa3bf] > perf[0x4fa923] > perf[0x4fd396] > perf[0x4f9614] > perf(perf_session__process_events+0x89e)[0x4fc38e] > perf(cmd_report+0x15d2)[0x43f202] > perf[0x4a059f] > perf(main+0x631)[0x427b71] > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830] > perf(_start+0x29)[0x427d89] For the cumulative output, we allocate the he_cache array based on the --max-stack option value and populate it with data from 'callchain_cursor'. The --max-stack option value does not ensure now the limit for number of callchain_cursor nodes, so the cumulative iter code will allocate smaller array than it's actually needed and cause above corruption. I think the --max-stack limit does not apply here anyway, because we add callchain data as normal hist entries, while the --max-stack control the limit of single entry callchain depth. Using the callchain_cursor.nr as he_cache array count to fix this. Also removing struct hist_entry_iter::max_stack, because there's no longer any use for it. We need more fixes to ensure that the branch stack code follows properly the logic of --max-stack, which is not the case at the moment. Original-patch-by:
Jin Yao <yao.jin@linux.intel.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit ab6e9a99 ] The symbol search called by machine__find_kernel_symbol_by_name is using internally arch__compare_symbol_names function to compare 2 symbol names, because different archs have different ways of comparing symbols. Mostly for skipping '.' prefixes and similar. In test 1 when we try to find matching symbols in kallsyms and vmlinux, by address and by symbol name. When either is found we compare the pair symbol names by simple strcmp, which is not good enough for reasons explained in previous paragraph. On powerpc this can cause lockup, because even thought we found the pair, the compared names are different and don't match simple strcmp. Following code path is executed, that leads to lockup: - we find the pair in kallsyms by sym->start next_pair: - we compare the names and it fails - we find the pair by sym->name - the pair addresses match so we call goto next_pair because we assume the names match in this case Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
Jin Yao authored
[ Upstream commit b40982e8 ] When we use perf report interactive annotate view, we can see the position of jump arrow is not correct. For example, 1. perf record -b ... 2. perf report 3. In interactive mode, select Annotate 'function' Percent│ IPC Cycle │ if (flag) 1.37 │0.4┌── 1 ↓ je 82 │ │ x += x / y + y / x; 0.00 │0.4│ 1310 movsd (%rsp),%xmm0 0.00 │0.4│ 565 movsd 0x8(%rsp),%xmm4 │0.4│ movsd 0x8(%rsp),%xmm1 │0.4│ movsd (%rsp),%xmm3 │0.4│ divsd %xmm4,%xmm0 0.00 │0.4│ 579 divsd %xmm3,%xmm1 │0.4│ movsd (%rsp),%xmm2 │0.4│ addsd %xmm1,%xmm0 │0.4│ addsd %xmm2,%xmm0 0.00 │0.4│ movsd %xmm0,(%rsp) │ │ volatile double x = 1212121212, y = 121212; │ │ │ │ s_randseed = time(0); │ │ srand(s_randseed); │ │ │ │ for (i = 0; i < 2000000000; i++) { 1.37 │0.4└─→ 82: sub $0x1,%ebx 28.21 │0.48 17 ↑ jne 38 The jump arrow in above example is not correct. It should add the width of IPC and Cycle. With this patch, the result is: Percent│ IPC Cycle │ if (flag) 1.37 │0.48 1 ┌──je 82 │ │ x += x / y + y / x; 0.00 │0.48 1310 │ movsd (%rsp),%xmm0 0.00 │0.48 565 │ movsd 0x8(%rsp),%xmm4 │0.48 │ movsd 0x8(%rsp),%xmm1 │0.48 │ movsd (%rsp),%xmm3 │0.48 │ divsd %xmm4,%xmm0 0.00 │0.48 579 │ divsd %xmm3,%xmm1 │0.48 │ movsd (%rsp),%xmm2 │0.48 │ addsd %xmm1,%xmm0 │0.48 │ addsd %xmm2,%xmm0 0.00 │0.48 │ movsd %xmm0,(%rsp) │ │ volatile double x = 1212121212, y = 121212; │ │ │ │ s_randseed = time(0); │ │ srand(s_randseed); │ │ │ │ for (i = 0; i < 2000000000; i++) { 1.37 │0.48 82:└─→sub $0x1,%ebx 28.21 │0.48 17 ↑ jne 38 Committer notes: Please note that only from LBRv5 (according to Jiri) onwards, i.e. >= Skylake is that we'll have the cycles counts in each branch record entry, so to see the Cycles and IPC columns, and be able to test this patch, one need a capable hardware. While applying this I first tested it on a Broadwell class machine and couldn't get those columns, will add code to the annotate browser to warn the user about that, i.e. you have branch records, but no cycles, use a more recent hardware to get the cycles and IPC columns. Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 0f19a038 ] Using Fedora 27 and latest Linux kernel the test case trace+probe_libc_inet_pton.sh fails again on s390. This time is the inlining of functions which does not match. After an update of the glibc (from 2.26-16 to 2.26-24) the output is different The expected output is: __inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) .... The actual output is: 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.061/0.061/0.061/0.000 ms 0.000 probe_libc:inet_pton:(3ffb2140448)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) ... Fix this by being less strict on 'inlined' verses library name and accept both Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180214070303.55757-1-tmricht@linux.vnet.ibm.comSigned-off-by:
-
Baoquan He authored
[ Upstream commit bee3204e ] Currently the kdump kernel becomes very slow if 'noapic' is specified. Normal kernel doesn't have this bug. Kernel parameter 'noapic' is used to disable IO-APIC in system for testing or special purpose. Here the root cause is that in kdump kernel LAPIC is disabled since commit: 522e6646 ("x86/apic: Disable I/O APIC before shutdown of the local APIC") In this case we need set up through-local-APIC on boot CPU in setup_local_APIC(). In normal kernel the legacy irq mode is enabled by the BIOS. If it is virtual wire mode, the local-APIC has been enabled and set as through-local-APIC. Though we fixed the regression introduced by commit 522e6646, to further improve robustness set up the through-local-APIC mode explicitly, do not rely on the default boot IRQ mode. Signed-off-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-7-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by:
-
Ørjan Eide authored
[ Upstream commit 57de50af ] When mapping external DMA-bufs through the PRIME mmap call, we might be given an offset which has to be respected. However for the internal DRM GEM mmap path, we have to ignore the fake mmap offset used to identify the buffer only. Currently the code always zeroes out vma->vm_pgoff, which breaks the former. This patch fixes the problem by moving the vm_pgoff assignment to a function that is used only for GEM mmap path, so that the PRIME path retains the original offset. Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Ørjan Eide <orjan.eide@arm.com> Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
